KW coilover springs | height-adjustable spring kit | fits Audi RS6 quattro C6/4F | 25310112

€0.00*

Prices incl. VAT plus shipping costs

Delivery time: Availability on request at Aulitzky Tuning*

Optional: Installation on site at Aulitzky Tuning

- Ein- & Ausbau der Gewindefedern
- Achsvermessung
- Kalibrierung der Assistenzsysteme/Licht

Assembly at location DE-91564 Neuendettelsau

Reset choice

€0.00*

place a request

Finanzieren Sie ihren Einkauf über die Targobank.

Product number: KW25310112

Product information "KW coilover springs | height-adjustable spring kit | fits Audi RS6 quattro C6/4F | 25310112"

KW coilover springs

The spring set with stepless lowering
KW coilover springs are used to lower the vehicle in combination with the standard dampers. In contrast to conventional spring sets, individual height adjustment is possible within the tested adjustment range. This solution uses vehicle-specific spring mounts with matched KW lowering springs and suitable elastomers as well as dust protection systems. The standard damper system, for example with electronic or hydraulic control, remains active.

Setup - sporty and harmonious spring rates
The high-quality chrome-silicon steel springs used by KW coilover springs are matched to the respective standard suspension dampers and wheel loads in their spring rate for each specific vehicle. When developing the respective spring sets, we ensure that the spring rates also harmonise perfectly with the different damper characteristics of your adaptive standard suspension. So even with a KW coilover spring set, you will experience your car more directly and dynamically. KW coilover springs are suitable for car drivers who want to lower their vehicle discreetly and take advantage of an individual adjustment range.

Stepless lowering
Similar to a coilover suspension, the KW coilover springs allow a stepless lowering in a discreet range. This is not possible with conventional lowering springs. The dust protection elements and spring travel limiters included in the scope of delivery are always adapted to the maximum possible lowering. This means that the height-adjustable KW springs can be used to achieve a sporty, harmonious driving behaviour without compromising the driving dynamics of performance-oriented vehicles.

Please note the conditions and instructions for this product:
- VA + HA height-adjustable (spring set consisting of VA+HA springs with height adjustment, can only be used with standard dampers)

Technical information:
Lowering VA/HA (mm): 10-40/15-45
Adjustment HA: Thread
Approval: Parts certificate (§19.3)
Scope of delivery: Set (VA+HA)

Compatible vehicles:
Manufacturer Model Version Body Fuel Performance Displacement Cylinder Drive
AUDI A6 (4F) 4F2, C6 04/2004-08/2011 RS6 quattro notchback Petrol 426 KW 4991 ccm 10 All-wheel drive
AUDI A6 Avant (4F) 4F5, C6 11/2004-08/2011 RS6 quattro estate Petrol 426 KW 4991 ccm 10 All-wheel drive

Please enter a valid email address.

Your question *

Please enter a valid question.

I agree that my data will be processed to answer the question. I have taken note of the Privacy Policy and agree to the information described therein.*

To continue, enter the characters shown above*

Fields marked with * are mandatory.

There aren't any asked questions yet.

Zuletzt gesehene Produkte

Front grille C-Style Carbon | fits BMW M2 (G87) S58 | Aulitzky Tuning

The high-quality C-style front grille made from pre-preg carbon fibre is an excellent addition to significantly enhance the style of your vehicle. Unlike regular carbon fibre, Pre-Preg carbon is reinforced to increase strength and durability. It can also be a staggering 70% lighter than other carbon fibre options.Prepreg carbon is far more uniform than other types of carbon, meaning the likelihood of imperfections is drastically reduced. The manufacturing process eliminates unwanted air bubbles and results in a perfectly smooth and high-gloss finish. Details:- 100% pure prepreg carbon fibre construction- OEM-style weave- High gloss finish- Fit guarantee- Registration according to §21 possible Scope of delivery:- 1x front grille Compatible vehicles:BMW G87 2 Series M2 Please note: The original M2 logo cannot be transferred to facelift models. Note: This is NOT an original BMW product!

€689.00*

Canards SOOQOO Carbon | fits BMW M5 (G90/G99) S68 | Aulitzky Tuning

The SOOQOO front canards made of pre-preg Carbon fiber give your vehicle a distinctly sporty aggressivenessDetails:- Constructed from 100% pure pre-preg carbon fibre- OEM style weave- High-gloss finish- Perfect fit- registration according to §21 possible Scope of delivery:1x front spoiler in prepreg carbon fibre Compatible vehicles:BMW M5 G90BMW M5 G99 TouringNote: This is NOT an original BMW product!

€499.00*

Front bumper insert Carbon with slats | fits BMW M5 (G90/G99) S68 | Aulitzky Tuning

The front bumper insert with slats made of pre-preg carbon fiber gives your vehicle a distinctly sporty aggressiveness and makes it stand out on the road.Details:- Constructed from 100% pure pre-preg carbon fibre- OEM style weave- High-gloss finish- Perfect fit- registration according to §21 possible Scope of delivery:1x front bumper insert in prepreg carbon fibre Compatible vehicles:BMW M5 G90BMW M5 G99 TouringNote: This is NOT an original BMW product!

€1,449.00*

Tip

Cold Air Intake System | fits Mercedes-Benz AMG M157 E63/E63S (212), CLS63/S (218), M278 CLS500/CLS550 | Blackboost

Upgrade your Mercedes AMG CLS 63(S) M157 with the BlackBoost Generation 2 high-performance cold air intake system - designed for enthusiasts who crave more power, efficiency and eye-catching aesthetics. State-of-the-art design and durabilityThe airboxes are laser-cut with the utmost precision from high-strength aluminum, assembled with stainless steel fasteners and finished with a sleek black powder coating for durability and a premium look. This robust construction ensures that your intake system performs optimally even under the most demanding conditions. Customized engine coverThe intake system includes a specially designed engine cover that combines style and functionality. Not only does it protect vital components, it also gives your engine bay a classy, elegant look. Two synthetic, dry, high-flow oval air filtersEquipped with newly developed dual oval filters, this system provides a larger surface area for better airflow and filtration. These high-flow filters ensure your engine receives cleaner air, improving overall performance. Molded composite intake manifolds with 1/8 NPT pre-turbo methanol portThis intake system with advanced molded composite manifolds is designed for maximum efficiency. Integrated 1/8 NPT ports allow for easy pre-turbo methanol injection upgrades, lowering intake temperatures and optimizing airflow, especially in high performance scenarios. Oversized intake ports and couplings for maximum performanceThis system includes oversized intake ports that further improve airflow into the intake, better oxygenating the engine and increasing power potential. In addition, oversized, heat-resistant couplings facilitate installation and ensure maximum durability under extreme conditions. Easy plug-and-play installationThis cold air intake system is a direct bolt-on upgrade that requires no fine-tuning or additional modifications. It integrates seamlessly with other performance components such as turbochargers, downpipes and methanol injection systems, making it the perfect choice for CLS 63(S) M157 owners looking for increased performance. Scope of delivery:- Powder-coated airbox with engine cover- Oversized intake ducts- Molded composite intake manifold with 1/8 Npt fittings- Oversized couplings- Vent line connections- Connecting clamps- Oval Twin Flow dry filters- Filter clamps- Extension cable- AMG badge transfer kit Key features:- Completely new design with motor cover- Oval shaped filters for a larger filter surface area- Open/close filter covers for customizable airflow control- 1/8 NPT connections integrated into the composite intake tubes- Proven power increase of 8-30+ hp on stock vehicles- Improved throttle response across the entire rev range- Supports airflow for 1000+ hp configurations- Plug and play installation- No ECU tuning required- No illumination of the check engine light Compatible vehicles:E63 AMG (W212/S212) - M157 5.5L V8 BiTurbo - (2013 - 2016)CLS63 AMG (C218/X218) - M157 5.5L V8 BiTurbo - (2012 - 2018)E500 (W212/S212) - M278 4. 7L V8 BiTurbo - (2013 - 2016)CLS 500 (C218/X218) - M278 4.7L V8 BiTurbo - (2012 - 2018)E550 (W212/S212) - M278 4.7L V8 BiTurbo - (2013 - 2016)CLS 550 (C218/X218) - M278 4.7L V8 BiTurbo - (2012 - 2018)

€1,999.00*

Intake system Carbon | fits BMW M135i/M235i (F40/F44), X2 M35i (F39) | Eventuri

Facts:Acceleration time: 60-130mph reduced by 0.2 secondsMaterial: CarbonManufacturer: EventuriParts certificate: A certificate is available for this product for certain regions and vehicles (details below) The Eventuri F40 Eventuri intake system has been developed through extensive real world testing and airflow simulation analysis. It features our patented Venturi housing system with an integrated mass airflow sensor section for the smoothest possible airflow to the turbo inlet pipe. The housing encloses our bespoke Generation 2 dry filter which shapes the airflow to maintain laminar conditions. The housing seals to the front duct, the volume of which has been maximized to reduce potential flow restrictions. The duct ensures that only ambient air is supplied to the filter so that the IATs are stable for most riding conditions. The system enables better throttle response and ensures that the turbo operates with a lower waste-gate duty cycle. The Eventuri DifferenceThe F40 Eventuri system utilizes our patented carbon housings with our custom Gen 2 filters that provide an aerodynamically efficient airflow path from the filter to the turbos. Not just another cone filter with a heat shield, but a unique design that creates the Venturi effect and maintains laminar flow conditions to reduce turbo drag. The Eventuri F40 intake system consists of a number of components designed for a specific purpose and manufactured to the highest standards. Here are the details for each component and the design ethos behind them. Each intake system consists of:Carbon venturi filter housing with integrated MAF pipeTailored high velocity generation 2 filterSealed carbon fiber air scoopAluminum inlet adapter2 x laser cut stainless steel brackets Parts certificateThe manufacturer's specifications apply for installation. An existing certificate is no guarantee that the product can also be installed in the corresponding vehicle. A certificate is available for this product for the following regions and vehicles:* DE/AT: Vehicle registration document, field K --- CH/LI: Vehicle registration document, field 24Countries Model Type approval*DE/AT F1H e1*2007/46*2018*..DE/AT F2GC e1*2007/46*2064*..DE/AT F2X e1*2007/46*1824*..DE/AT FMK e1*2007/46*1683*..DE/AT FML2 e1*2007/46*1678*..DE/AT FMX e1*2007/46*1682*.. Compatible vehicles:VehicleVehicle typePowerEngine capacityEngine typeYear of construction BMW 1er (F40)M135i xDrive225kW / 306hp1998cm³B48 A20 E07.19 -BMW 2er Gran Coupe (F44)M235i xDrive225kW / 306hp1998cm³B48 A20 E11.19 -BMW X2 (F39)M35i 225kW / 306hp1998cm³B48 A20 E11.18 -

€1,527.00*

Performance intercooler kit incl. air intake system | fits Mercedes-Benz A35 AMG (W177/V177) | Wagner Tuning

The Wagner Tuning Competition intercooler kit is suitable for the following vehicles:Mercedes W177 A35 AMG 225KW/306hp (2018-2022)Mercedes V177 CLA35 AMG 225KW/306hp (2018-2022) Be ready for the summer with our brand new Wagner Tuning Performance intercooler kit incl. air intake system for Mercedes W/V 177 A35 AMG, which outshines everything that has come before. We present to you an absolute must-have for this season that you must not miss. The 2.0 liter R4 turbo engine (M260.920) of the Mercedes-AMG models deserves only the best when it comes to cooling capacity and performance. That's why we have replaced the indirect charge air cooling circuit with our innovative Wagner Tuning high performance intercooler to give you the ultimate driving experience. With the new performance cooling network and dimensions of 287 mm x 185 mm x 115 mm, we have developed a high-performance intercooler that is specially tailored to the high requirements of the AMG engine. Compared to the original radiator, it offers an impressive 154% more external mesh volume, ensuring maximum heat transfer and optimal internal airflow. Our cast aluminium end boxes have been optimized using CAD technology and CFD simulations to ensure excellent cooling properties with minimal back pressure. This also makes this kit perfect for racing, where optimum cooling of the supercharged air with a noticeable increase in performance is crucial. Our Wagner Tuning intercoolers are equipped with a thermally conductive anti-corrosion coating, which ensures a lasting cooling effect and ensures a long service life of the cooler. Installation of the system is simple and straightforward thanks to our detailed installation instructions (video) - a real plug & play experience. Please note that installation of the intercooler kit is only possible in combination with our optimized air intake system. The original air intake system must be completely removed, as this is where the intercooler is fitted. Our optimized air intake system is relocated to the right wheel arch. This allows short intake paths to be generated without large deflections. This system also includes a specially developed open sports air filter, which offers maximum filtration efficiency with minimum back pressure. With a connection diameter of Ø76 mm in the direction of the turbocharger, which is adapted to the original turbocharger connection using a silicone hose, the air mass flow rate is increased by an impressive +50%. This improves the response of the engine and results in a direct increase in performance. The advantages of this product at a glance:- Significantly improved cooling performance for maximum power delivery- Reduced back pressure for optimized engine performance and torque- Mechanical relief of the turbocharger for a longer service life- 100 % pressure resistance for reliable performance- Simple plug & play installation without complex modifications- Up to 4-year warranty for a worry-free driving experience- Important! Only compatible with our optimized air intake system (included in the kit) Give your AMG engine the upgrade it deserves and experience the impressive increase in performance with the Wagner Tuning high-performance intercooler. Get the best out of your vehicle and dominate the road like never before! Mesh dimensions OEM intercooler:190 mm x 195 mm x 65 mmV = 2.40 liters Mesh dimensions Wagner Tuning intercooler:287 mm x 185 mm x 115 mmV = 6.10 liters (+154%) Scope of delivery:1 intercooler1 aluminum boost pipe6 reinforced silicone hoses1 Ø76mm plastic intake pipe1 sports air filter1 mounting material1 installation instructionsAttention: Not approved in the area of the StVZO.

€2,290.00*

KW coilover springs | height-adjustable spring kit | fits Audi RS6 quattro C6/4F | 25310112

Ratenrechner

Ask a question

Previously asked questions