Free shipping
info@aulitzkytuning.de
+49 (0)9874 6891630

Lowering sport springs | fits VW Polo (AW) GTI | 28280403 | ST Suspensions

€189.00*

Delivery time: Availability on request at Aulitzky Tuning*

place a request
Product number: ST28280403
Product information "Lowering sport springs | fits VW Polo (AW) GTI | 28280403 | ST Suspensions"

ST sport springs

With over 1,000 applications, the wide range of springs from ST suspensions is one of the few lowering springs on the market that improve the handling of a vehicle in combination with the standard suspension. In addition to an appealing lowering effect, the ST suspensions sports springs enable an increase in cornering speed and dynamic driving.

Great looks for every car
The ST suspensions sports springs are manufactured in OEM quality from chrome-silicon steel using a cold-forming process, are multi-tempered and have a final epoxy coating. This enables them to withstand a wide range of weather conditions. Depending on the vehicle model, ST suspensions sports springs can be used to achieve a subtle lowering of 20 mm at the front and 15 mm on the drive axle on the current BMW M3 (E9x series), an appealing 30 mm on both axles on the Audi A1 or up to 60 mm on the VW Golf I, for example. The installation of ST suspensions sports springs not only lowers the body's center of gravity compared to the standard suspension, but also benefits the driving dynamics. During strong steering movements, such as evasive maneuvers and fast cornering, the lower body roll reduces body movements. Furthermore, compression and rebound are reduced, making the handling more agile.

The ideal spring rate for every lowering
The spring rates of the ST suspensions sports springs harmonize perfectly with the set-up of the standard dampers. In conjunction with the respective vehicle weight, the wheel loads and the level of the intended lowering, the ST suspensions sports springs have a major influence on the compression and rebound behavior of the standard suspension. The ST suspensions sports springs made of chrome-silicon steel not only support the vehicle weight, but also guarantee a more direct driving experience thanks to the specially tuned spring rates. Depending on the level of lowering, for example with a reduction in the center of gravity of 20 mm, 30 mm or 40 mm, the ST suspensions sports springs have different spring rates that harmonize with the standard dampers. The higher the lowering level, the higher the spring rate

Great variety, not just for tuning enthusiasts
The sports springs from ST suspensions are not only available for current vehicles and new cars such as the Audi A7 Sportback or Mercedes-Benz E-Class and others.
Lovers of timeless models such as the BMW E30 or VW Golf I will also find the ideal sports springs in the ST suspensions product range. The tested ST suspensions sports springs are even available for unusual vehicles. The range of sports springs currently includes around 1,000 applications for 30 different car brands from Alfa Romeo to Volvo.

Please note the conditions and instructions for this product:
- For vehicles with factory lowering, the specified lowering rate is reduced by the amount of factory lowering

Technical information:
Lowering VA/HA (mm): 20/20
Approval: Parts certificate (§19.3)
Scope of delivery: Set VA+HA (4 pcs.)
Year of construction: 09/2017-
Axle load VA/HA (kg): -1000/-850

Compatible vehicles:
Manufacturer Model Version Body Fuel Performance Displacement Cylinder Drive
VW POLO VI (AW, AW1, BZ1) 06/2017- 2.0 GTI Hatchback Petrol 147 KW 1984 ccm 4 Front-wheel drive
VW POLO VI (AW, AW1, BZ1) 06/2017- GTI Hatchback Petrol 152 KW 1984 ccm 4 Front-wheel drive

Please enter a valid email address.
Please enter a valid question.
Fields marked with * are mandatory.

There aren't any asked questions yet.
Zuletzt gesehene Produkte

Zuletzt gesehene Produkte

Paddle shifters Carbon | fits BMW G-series, Toyota Supra | PaddleShifterz
We present the ultimate upgrade for the G-Series, F4X/F9X or Toyota Supra: The Pre-preg Carbon Paddle Shifters, developed and manufactured in Germany. These high-quality paddle shifters are made from pre-impregnated carbon fibre, resulting in a stronger and more durable product. In addition, the lightweight design of these paddle shifters not only gives your car a sporty look, but also improves your driving experience with faster and more precise gear changes. Furthermore, the carbon fibre material is wear-resistant, ensuring the durability of these paddle shifters for years to come. Whether you're an avid racetrack fan or just want to add a touch of racing style to your vehicle, these paddle shifters are the perfect choice. Details:- Full replacement for the OEM paddle shifters- Manufactured using 2×2 woven and pre-impregnated carbon fibre- Full carbon fibre replacement, hollow design- Coated in gloss lacquered finish- Better ergonomics, our paddle shifters were developed using 3D scans of the OEM steering wheel to get the best fit- Developed and manufactured in Germany When developing these paddle shifters, we kept two things in mind:1. they had to look fantastic, as you spend a lot of time behind the wheel, it has to look good.2. obviously: ergonomics, they have to look good and work better than OEM. No matter where you interact with them, they work perfectly. Scope of delivery:- 2x paddle shifters (left and right)- Made from carbon fibre Compatible vehicles:BMW 1 Series (2019+, F40)BMW 2 Series (2020+, F44)BMW 3 Series (2018+, G20, G21)BMW 4 Series (2020+, G22, G23, G26)BMW 5 Series (2017+, G30, G31)BMW 7 Series (2015+, G11, G12)BMW 8 Series (2018+, G14, G15, G16)BMW M3 Competition (2021+, G80, G81)BMW M4 Competition (2021+, G82)BMW M5/M5 Competition (2017+, F90, F90 LCI)BMW M8 Competition (2018+, F91, F92, F93)BMW X3/X3M Competition (2017+, G01, F97)BMW X4/X4M Competition (2018+, G02, F98)BMW X5/X5M Competition (2019+, G05, F95)BMW X6/X6M Competition (2019+, G06, F96)BMW X7/X7M (2019+, G07)BMW Z4 G29Toyota Supra MK5

€499.00*
Competition water cooler kit | fits Mercedes-Benz G63 AMG (W463) 585hp | Wagner Tuning
The Wagner Tuning Competition water cooler kit is suitable for the following models:Mercedes G63 AMG W463 430KW/585PS (06/2018-06/2020)Mercedes G63 AMG W463 430KW/585PS (07/2020-) Boost the performance of your Mercedes G63 AMG:Rely on the proven quality and innovation of Wagner Tuning and upgrade your Mercedes G63 AMG with our Competition water cooler kit. Experience improved cooling performance and maximum efficiency for your vehicle.This specially developed kit significantly improves the cooling performance of your vehicle and ensures optimum performance of your 4.0L V8 biturbo engine. Innovative cooling technology:The 4.0L V8 biturbo engine of the Mercedes G63 AMG models utilises an indirect charge air cooling circuit, which works with its own cooling water circuit instead of ambient air. The Wagner Tuning auxiliary water coolers effectively reduce the cooling water temperature, which directly leads to an improved cooling performance of the charge air. Maximised cooling performance:The newly developed competition racing mesh of the Wagner Tuning high-performance water cooler increases the radiator volume of the standard water cooler by an impressive 48%. The optimum balance between the inner and outer cooling surface maximises heat transfer without compromising the airflow for neighbouring components such as the engine water cooler. Lasting efficiency:Our water coolers are coated with a thermally conductive anti-corrosion coating that ensures long-term cooling efficiency. This advanced coating protects against corrosion and ensures system longevity. Easy installation:The kit is designed for easy and hassle-free installation. Thanks to the detailed installation instructions, the system can be installed quickly and easily as a plug & play solution. Scope of delivery:2x additional water coolerSilicone hosesInstallation materialAttention: Not authorised in the area of the StVZO.

€1,390.00*
Tip
Aulitzky Tuning | Water cooler Set side-mounted | fits BMW M2/M3/M4 incl. Competition/CS/CSL (G80/G81/G82/G83/G87) S58
The side-mounted Aulitzky Tuning water cooler for the S58 engines of the G8x series was developed to meet the high demands of the engine. Advantages: - Specially developed for the S58 3.0L R6 biturbo engine - Constant maximum performance - Thermal stabilization With combination certificate!* Compatible vehicles:VehicleVehicle typePowerCapacityEngineYear of construction BMW 2er (G87)M2338kW / 460hp2993cm³S58 B30 A11.22 - BMW 3 Series (G80)M3353kW / 480hp2993cm³S58 B30 B11.20 - BMW 3 Series (G80/G81)M3 Competition / xDrive375kW / 510hp390kW / 530hp2993cm³S58 B30 A05.21 -07.24 - BMW 3 Series (G80)M3 CS xDrive405kW / 551hp2993cm³S58 B30 A03.23 - BMW 4 Series (G82)M4353kW / 480hp2993cm³S58 B30 B11.20 - BMW 4 Series (G82/G83)M4 Competition / M xDrive375kW / 510hp2993cm³S58 B30 A11.20 - BMW 4 Series (G82)M4 CSL xDrive405kW / 551hp412kW / 560hp2993cm³S58 B30 A05.22 - 02.2311.22 - 02.23 *The combination certificate for the pre-facelift and facelift models is available (includes intake manifold, intake, intercooler, boost pipe kit, downpipe, exhaust system, 670hp Aulitzky App performance increase and 107dB increase in stationary noise).

€189.00*
Connecting rod bearing change | for BMW M5 (E60/E61) 507hp S85
Includes the following services: - Removing and replacing the connecting rod bearings - Check and measure crankshaft journals - Check and adjust the oil pump - Clean all parts - Wheel alignment - Oil & filter change - incl. all parts such as bearings, screws, seals, oil filter and engine oil (10W60) - Entry in the service booklet with BMW registration number stamp - 1 litre oil refill In addition, and depending on requirements, we can also replace the spark plugs and engine mounts for an additional charge. Please note: This service can only be carried out at our company headquarters!

€2,749.00*