Intake system ABS Carbon | fits Mini Cooper S/JCW (F54/F55/F56/F57) B48 | Eventuri

The high-quality rear diffuser made of pre-preg carbon fibre is a great addition that significantly increases the style and aggressiveness of the vehicle. Unlike regular carbon fibre, pre-preg carbon is reinforced to increase strength and durability. It can also be a staggering 70% lighter than other carbon fibre options.Prepreg carbon is far more uniform than other types of carbon, meaning the likelihood of imperfections is drastically reduced. The manufacturing process eliminates unwanted air bubbles and results in a perfectly smooth and high-gloss finish. Details:- 100% pure prepreg carbon fibre construction- OEM-style weave- High gloss finish- Fit guarantee- Registration according to §21 possible Scope of delivery:- 1x rear diffuser Compatible vehicles:BMW M2 G87 Note: This is NOT an original BMW product!

Facts: Power increase: 8-11hp, 8-10ft-lb Flow Bench Data: Stock intake 905 CFM : Eventuri intake 1025 CFM Brand: Eventuri Material: Carbon fibre Expertise: without The Porsche GT3 RS intake was developed to provide a more efficient flow path to the engine compared to the OEM airbox. By utilising our patented Venturi housing concept, the airflow can pass through the filters on a much less tortuous path, reducing the drag of the system. In addition, by increasing the total volume in the intake tract, the maximum flow capacity has also been increased. By using customised filters with an outer diameter of 192 mm or 7.5? and a filter surface area of over 110,000 mm^2 each, we have made optimum use of the available space. Intake air temperatures have also been minimised through a sealed system and the use of carbon fibre, which has a low coefficient of thermal conductivity across the wall thickness. The result is a real increase in performance and a noticeable improvement in throttle response. The Eventuri difference The 991 GT3 RS Eventuri system uses our patented carbon fibre housing, which provides an aerodynamically efficient airflow path from the filter to the engine. Flow tests We conducted flow tests using a Superflow SF-1020 to measure the maximum possible flow rate at a pressure drop of 28" H2O. The tests were performed on the same day under controlled conditions, using the same test fixture for each system. We tested our complete intake system compared to the stock airbox system. The results show an increase in maximum flow by an additional 120 CFM over the OEM airbox. Importantly, this was achieved with a sealed intake system so that intake temperatures are also kept to a minimum. Bench test Our GT3 RS intake was independently tested by ES Motors, who build high performance Porsches in the UK. The tests were carried out on a chassis dyno on the same day, one after the other. As you can see, there is a measurable gain across the rev range, not just at the peak, which is more important as the increased area under the graph shows that the intake has an impact beyond the headlines. This gain is noticeable even on a production car on the road through better throttle response and quicker acceleration. The first chart is the summary of the results and the second is a screenshot of the dyno test to show the gain in the mid-range. Compatible vehicles:VehicleTypePower outputDisplacementEngineYear of construction Porsche 911 (991.1)GT3 RS368kW / 500PS3996cm³MA1.76, MDG.GA04.15 - 12.20 Porsche 911 (991.2)GT3 RS383kW / 520PS3996cm³MA1.77, MDG.GB05.18 - 12.20

Facts: Performance increase with up to 15 hp Material: Carbon Manufacturer: Eventuri Parts certificate: A certificate is available for this product for certain regions and vehicles (details below) Big cars - big intakes. With the intake system for the Audi RS6/RS7 C7, Eventuri sets new standards in precision and efficiency not only for itself but for the industry. Thanks to the two patented Eventuri air filters, the air flow is channelled laminar and without turbulence directly into the turbos. In addition to the rich sound of the intake, the Audi RS6/RS7 C7 intake comes with a significant increase in performance of up to 15 hp. The two-part, large heat shield ensures optimum shielding of the air flow from the engine heat. The heat shield cools itself through a small air slot between the insulating plates. The ingenious, fluid processing of the scoop for the air intake and the seamless transition into the patented Eventuri housing made of full carbon fibre ensure an individual and captivating look. The Eventuri intake for the Audi RS6/RS7 C7 comes in the following components: Carbon filter housing with integrated inlet pipe 2 efficient high-flow cones with urethane filter Carbon scoop Carbon filter cover CNC milled mount for the mass air flow sensor 2-piece main heat shield Laser-cut suspension The well-known Venturi effect is enhanced by Eventuri's technically ingenious product design. The alignment of the airflow through the elegant scoop creates a suction as it enters the filter housing through the filter, which compresses the airflow perfectly and directs it into the turbo. The optimised airflow then ensures a significant uplift in engine performance. Parts certificate The manufacturer's specifications apply to installation. An existing certificate is no guarantee that the product can also be installed in the corresponding vehicle. A certificate is available for this product for the following regions and vehicles: * DE/AT: Vehicle registration document, field K --- CH/LI: Vehicle licence, field 24 Country Model Type approval* DE/AT Audi RS6 (4G) e1*2007/46*0544*.. DE/AT Audi RS7 (4G) e1*2007/46*0544*.. Compatible vehicles:VehicleVehicle typePowerEngine capacityEngine typeYear of construction Audi A6 (C7)RS6 quattro412kW / 560hp3993cm³CRDB, CWUB01.13 - 09.18 Audi A6 (C7)RS6 performance quattro445kW / 605hp3993cm³CWUC11.15 - 09.18 Audi A7 (4G)RS7 quattro412kW / 560hp3993cm³CRDB, CWUB10.13 - 04.18 Audi A7 (4G)RS7 performance quattro445kW / 605hp3993cm³CWUC11.15 - 04.18

Aero Dynamics full carbon side skirt attachment made of high quality arbonOur CUP side skirts set subtle motorsport accents without being obtrusive. The application concerns the BMW M3/M4 models F80 and F82. The sills have already been fitted for a short time, but are in top condition apart from minor scratches (see pictures)! SPECIAL PRICE - USED (TOP CONDITION)

The Wagner Tuning Competition intercooler kit is suitable for the following vehicles:VW Tiguan AD1 R 2,0 TSI 235KW/320hpSkoda Kodiaq RS 2,0 TSI 180KW/245hp Experience the revolutionary Competition intercooler, which gives your vehicle a noticeable boost and catapults you to a new level. With its impressive net dimensions of 640 mm x 410 mm x 65 mm, it offers a generous external charge air volume of 17 liters (compared to the 9 liters of the OEM model). Here, our newly developed competition high-performance mesh (Tube Fin) sets new standards. It enables optimum airflow and at the same time ensures sufficient cooling for neighboring components such as the water cooler. And the best thing about it? Despite its size, the intercooler remains surprisingly light at just 8.4 kg. The cast aluminum end boxes have been perfected using the latest CAD technology and CFD simulations to ensure optimal internal airflow. Innovative air routing in the end box ensures even distribution of air throughout the Competition high performance network. The inlets and outlets of the intercooler have been enlarged to an impressive Ø 70mm, which is why this kit is equipped with reinforced silicone hoses. Thanks to these advantages, the intercooler offers significantly reduced back pressure compared to the standard model. Of course, this intercooler also features our tried-and-tested anti-corrosion coating with outstanding heat conduction properties. This guarantees long-lasting and optimum cooling performance, which leads to a noticeable increase in performance. Installation is extremely easy by simply replacing the OEM intercooler with our Competition intercooler. You'll be amazed at how straightforward the process is. As with all our products, this intercooler is subject to constant quality monitoring in order to meet the highest standards. What are you waiting for? Get ready for the competition and experience the performance explosion with the Competition intercooler! Advantages of the Wagner Tuning intercooler:- improved cooling performance- 17 liter charge air volume- Inlets and outlets of the intercooler enlarged to Ø 70mm- Reduced back pressure- Plug & Play Scope of delivery:1 intercooler2 silicone hoses2 hose clamps1 mounting material1 assembly instructionAttention: Not approved in the area of the StVZO.