KW coilover springs | height-adjustable spring set | fits Audi RS3 quattro 8Y | 253100DV

€0.00*

Prices incl. VAT plus shipping costs

Delivery time: Availability on request at Aulitzky Tuning*

Optional: Installation on site at Aulitzky Tuning

- Ein- & Ausbau der Gewindefedern
- Achsvermessung
- Kalibrierung der Assistenzsysteme/Licht

Assembly at location DE-91564 Neuendettelsau

Reset choice

€0.00*

place a request

Finanzieren Sie ihren Einkauf über die Targobank.

Product number: KW253100DV

Product information "KW coilover springs | height-adjustable spring set | fits Audi RS3 quattro 8Y | 253100DV"

KW coilover springs

The spring set with stepless lowering
KW coilover springs are used to lower the vehicle in combination with the standard dampers. In contrast to conventional spring sets, individual height adjustment is possible within the tested adjustment range. This solution uses vehicle-specific spring mounts with matched KW lowering springs and suitable elastomers as well as dust protection systems. The standard damper system, for example with electronic or hydraulic control, remains active.

Setup - sporty and harmonious spring rates
The high-quality chrome-silicon steel springs used by KW coilover springs are matched to the respective standard suspension dampers and wheel loads in their spring rate for each specific vehicle. When developing the respective spring sets, we ensure that the spring rates also harmonise perfectly with the different damper characteristics of your adaptive standard suspension. So even with a KW coilover spring set, you will experience your car more directly and dynamically. KW coilover springs are suitable for car drivers who want to lower their vehicle discreetly and take advantage of an individual adjustment range.

Stepless lowering
Similar to a coilover suspension, the KW coilover springs allow a stepless lowering in a discreet range. This is not possible with conventional lowering springs. The dust protection elements and spring travel limiters included in the scope of delivery are always adapted to the maximum possible lowering. This means that the height-adjustable KW springs can be used to achieve a sporty, harmonious driving behaviour without compromising the driving dynamics of performance-oriented vehicles.

Please note the conditions and instructions for this product:
- VA + HA height-adjustable (spring set consisting of VA+HA springs with height adjustment, can only be used with standard dampers)

Technical information:
Lowering VA/HA (mm): 0-15/0-20
Adjustment VA/HA: Thread
Approval: Parts certificate (§19.3)
Scope of delivery: Set (VA+HA)

Compatible vehicles:
Manufacturer Model Version Body Fuel Performance Displacement Cylinder Drive
AUDI A3 Sedan (GY) 8YS 04/2020- RS3 quattro notchback Petrol 294 KW 2480 ccm 5 All-wheel drive
AUDI A3 Sedan (GY) 8YS 04/2020- RS3 quattro notchback petrol 299 KW 2480 ccm 5 all-wheel drive
AUDI A3 Sportback (GY) 8YA 11/2019- RS3 quattro hatchback petrol 294 KW 2480 ccm 5 all-wheel drive
AUDI A3 Sportback (GY) 8YA 11/2019- RS3 quattro hatchback petrol 299 KW 2480 ccm 5 all-wheel drive

Please enter a valid email address.

Your question *

Please enter a valid question.

I agree that my data will be processed to answer the question. I have taken note of the Privacy Policy and agree to the information described therein.*

To continue, enter the characters shown above*

Fields marked with * are mandatory.

There aren't any asked questions yet.

Zuletzt gesehene Produkte

Rear bumper Carbon | fits Lamborghini Huracan | Vorsteiner

The Vorsteiner carbon rear bumper for the Lamborghini Huracan Novara Edizione reduces the weight and improves the aerodynamics of the vehicle. Thanks to its integrated diffuser and its uneven shape, it ensures pressure distribution in the rear area and thus downforce. Made from autoclaved prepreg carbon fibre.Expertise: Material certificate Compatible vehicles:LAMBORGHINI HURACÁN 5.2 LP 580-2 2015-2019LAMBORGHINI HURACÁN 5.2 LP 610-2 Since 2020LAMBORGHINI HURACÁN 5.2 LP 610-4 Since 2014LAMBORGHINI HURACÁN SPYDER 5.2 LP 580-2 Since 2016LAMBORGHINI HURACÁN SPYDER 5.2 LP 610-4 Since 2015

€11,245.00*

Engine cover Carbon with cutouts | fits for Lamborghini Huracan | Eventuri

Facts:Material: CarbonManufacturer: EventuriExpert opinion: without Our complete engine cover set is made from prepreg carbon fiber and has cutouts to expose our intake, which is sold separately. Available in a satin finish to reduce reflections into the interior and also contrast with the glossy intake system underneath. The complete set consists of the main center cover, two side covers and the rear strut cover. Compatible vehicles:VehicleVehicle typePowerEngine capacityEngine type Lamborghini Huracan5.2 LP 580-25.2 LP 610-25.2 LP 610-4426kW / 580hp449kW / 610hp449kW / 610hp5204cm³CSJB, DKBDGFACSJB, DKB Lamborghini HuracanLP 640-2470kW / 640hp5204cm³DGFB Lamborghini Huracan5.2 Performante470kW / 640hp5204cm³DGFB

€5,296.00*

Front lip Carbon | fits BMW M5 incl. Competition (F90) S63 | AutoTecknic

AutoTecknic's vision is to develop the most advanced, innovative and unique products on the market to meet the needs of the most demanding customers. The lightweight carbon fiber aerodynamic products are uniquely designed to enhance the original design of your vehicle. The central design philosophy "understand functional elegance" takes the sporty appearance of your vehicle to a new level. Quality products characterize the AutoTecknic brand. Every single part must pass strict quality controls before it reaches your vehicle. Customers expect nothing less than the best parts from AutoTecknic, so naturally we expect nothing less. AutoTecknic's autoclaved pre-preg carbon fiber structure gives the product superior stiffness, strength and durability compared to traditional handmade carbon fiber composites. AutoTecknic Dry Carbon Center Front Lip for the F90 is both highly visible and highly functional. Compatible vehicles:BMW 5 (G30, F90) M5 2017-2023BMW 5 (G30, F90) M5 Competition 2018-2023

€799.00*

Competition intercooler kit EVO 2 | fits Porsche 911 (997.1) 3.6 Turbo 480hp | Wagner Tuning

The Wagner Tuning Competition intercooler kit EVO 2 upgrade kit fits the following models:Porsche 997 Turbo (2006-2008) 3.6L; 353KW / 480hp EVO 2 high-performance intercooler kit: The ultimate performance upgrade for your Porsche 997 Turbo Experience the unbridled power of your Porsche 997 Turbo with our EVO 2 High Performance Intercooler Kit. Here's what this kit has to offer. Our EVO 2 high performance intercoolers (2 x [330mm x 222mm x 145mm] = 21,244cm³) are designed to provide a whopping 77% more charge air volume than the factory intercoolers. This means a significant increase in the performance of your vehicle. Our specially developed competition high performance mesh ensures excellent cooling characteristics. Even under extreme conditions, your engine will maintain the optimum temperature. Despite its impressive performance, our intercooler kit is surprisingly light. Each of the two coolers weighs just 2x 6.7 kg, which helps to reduce weight in addition to increasing performance. CAD-developed free-form end boxes made of cast aluminum ensure the best possible internal air flow and a high pressure resistance of up to 6 bar (tested). Our kit includes a custom-fit carbon air duct which ensures that the intercooler is optimally supplied with fresh air. This is crucial for the maximum performance of your vehicle. The kit includes additional silicone hoses with an enlarged cross-section to optimize the airflow. Our intercoolers are coated with an anti-corrosion coating that not only ensures longevity, but also has excellent heat conduction properties. Our kit comes complete with new carbon air guides, silicone hoses and aluminum adapters. Installation is simple and is done in exchange for the factory intercoolers. This kit is specifically designed for racing and features a 70mm inlet and outlet for maximum performance. Get the most out of your Porsche 997 Turbo with our EVO 2 high performance intercooler kit. Visit our website for more information and to order your kit. Advantages of the Wagner Tuning intercooler:- improved cooling performance- 77% more charge air volume- extended to 70 mm inlet and outlet- Precisely fitting carbon air duct- simple replacement Scope of delivery:2 intercoolers4 carbon air ducts4 silicone hoses4 hose clamps1 mounting materialAttention: Not approved in the area of the StVZO.

€3,440.00*

KW coilover springs | height-adjustable spring set | fits Audi RS3 quattro 8Y | 253100DV

Ratenrechner

Ask a question

Previously asked questions