Race-Spec Dual-Pass DKG transmission oil cooler | fits BMW M2 (F87) N55 | CSF Race

With the AP-Racing Big Brake Kit, we offer a high-performance solution especially for track days and for race track drivers. The friction rings are mounted floating on the high-strength, milled aluminium pots. The advantages of this are, on the one hand, the lower weight and, on the other, the fact that the friction rings can be replaced cost-effectively when they wear out. The AP-Racing calipers are racing calipers without dust boots, which are only recommended for use on the racetrack (regular cleaning of the calipers is necessary in normal road traffic). Details and scope of delivery:- Big Brake Kit for the front/rear axle, consisting of AP Racing calipers and J-Hook brake discs in 378×34mm- AP Racing 6-piston brake caliper- Brake discs 378×34mm, J-Hook- CNC milled brake caliper adapter incl. material certificate- Braided steel brake lines- incl. brake padsAluminium pots and floating mounting Compatible vehicles:- BMW F87 M2 incl. Competition/CS- BMW F8x M3/M4 incl. Competition NOTES:If we do not expressly refer to a parts certificate or general operating licence (ABE) in the product text, this is a motorsport article that is not approved in the German Road Traffic Regulations (StVZO) and therefore the operating licence expires if no registration is made in accordance with § 21 StVO!This brake system can only be registered by us after special tests. Please note that vehicle spare parts should only be installed by a qualified specialist workshop in order to ensure that they function properly and that the vehicle is roadworthy.

Facts: - replaces the main catalyst - with 200 cell stainless steel sports catalyst - Euro 6 compatible - with ECE approval*Compatible vehicles: VehicleVehicle typePowerEngine capacityEngine typeYear of constructionBMW 2 Series Coupe (F87)M2272kW / 370hp2979cm³N55 B30 A11.15 - 06.18 Note: Depending on the software version, the engine control light may light up. We recommend the purchase of an OFF set module or software customisation. *This downpipe has ECE approval so that it can be used within the scope of the German Road Traffic Licensing Regulations (StVZO) without registration in the vehicle documents.

Facts: - Tailpipes: 4x101mm black matt - stainless steel 3.5 inch - Electric flaps - Exhaust flaps with ceramic bearings - Made in Germany (Lake Constance) - with/without ECE approval (depending on choice of flap control)* Scope of delivery: - 1x Aulitzky Exhaust exhaust system from catalytic converter - 4 x tailpipes 101mm - ECE handout Not every BMW softwarestand regulates the exhaust flaps correctly according to the ECE specifications. For this reason, we offer our optional flap control module, which complies 100% with the legal regulations and guarantees legal operation of the Aulitzky Exhaust. Compatible vehicles: VehicleTypePowerEngine capacityEngineYear of constructionBMW 2 Series Coupe (F87)M2272kW / 370hp2979cm³N55 B30 A11.15 - 06.18 *ATTENTION! In conjunction with the standard or ECE flap control system (with type approval), this flap exhaust system has ECE approval, meaning that it can be used legally within the scope of the StVZO without registration in the vehicle documents.The use of flap exhaust systems in conjunction with the race flap control (without approval) is not permitted for use on public roads and is only intended for racing purposes! If you nevertheless install a product without approval in your vehicle and use it within the scope of the StVZO, you are liable to prosecution. Possible consequences that you can expect in this case: Expiry of the operating licence in accordance with §19 of the StVZO and possible resulting immobilisation of the vehicle. Other possible consequences, such as a charge of tax evasion, as well as possible investigations by the environmental authorities are at the discretion of the investigators.

Function: - Variable flap control of the original or retrofitted flap exhaust system - Can be controlled via steering wheel buttons Compatible vehicles:VehicleVehicle typePowerEngine capacityEngineYear of constructionBMW 2er Coupe (F87)M2272kW / 370hp2979cm³N55 B30 A11.15 - 06.18BMW 2er Coupe (F87)M2 Competition302kW / 411hp2979cm³S55 B30 A06.18 - 06.21BMW 2er Coupe (F87)M2 CS331kW / 450hp2979cm³S55 B30 A11.19 - 06.21 Note: This product is NOT approved in the StVZO and is NOT intended for sale within the EU! This item is intended exclusively for show and motorsport purposes and must not be used/installed on public roads. If the component is installed on/in the vehicle, the operating license expires!The pictures shown are examples.

The Endless pads are an excellent brake pad for racing and everyday use. The ME22 is the further development of the popular ME20 brake pad. Unlike the MX72 pad, the ME22 has no heat shields.Coefficient of friction 0.36 - 0.42 µOperating temperature 150 - 800 °CSemi-metallic pad For the rear axle. Compatible vehicles:BMW 4-piston BMW (Performance) brake caliper, blue caliper for F-series vehicles, e.g. M135i M140i F20 F21, M235i M240i F22 F23, 335i 340i F30 F31 F34, 435i 440i F32 F33 F36, M2 F87, M3 F80,M4 F82 F83Alpina models such as the B3Motorsport articles - without STVZO approval.

The Endless pads are an excellent brake pad for racing and everyday use. The ME22 is the further development of the popular ME20 brake pad. In contrast to the MX72 pad, the ME22 has no heat protection plates.Coefficient of friction 0.36 - 0.42 µOperating temperature 150 - 800 °CSemi-metallic pad For the front axle. Compatible vehicles:BMW 4-piston BMW (Performance) brake caliper, blue caliper on F-series vehicles, such as M135i M140i F20 F21, M235i M240i F22 F23, 335i 340i F30 F31 F34, 435i 440i F32 F33 F36, M2 F87, M3 F80,M4 F82 F83Alpina models such as the B3 Motorsport articles - without STVZO approval.

The Endless pads are an excellent brake pad for racing and everyday use. The MX87 is the further development of the MX72 and not only builds up friction with the disc faster, but is also more heat-resistant. Temperature range from 30-700CLow brake disc wearamazing longevity of the padReduction of heat cracksimproved response behaviourCoefficient of friction of 0.38-0.46 By far the greatest speciality, however, is the balancing act between suitability for everyday use and use on trackdays:This means that this rubber is suitable in every situation, whether on long trackdays, or in everyday use.However, if the vehicle is mainly used on the track, we recommend the N39S. For the front axle. Compatible vehicles:BMW 4-piston BMW (Performance) brake caliper, blue caliper on F-series vehicles, such as. M135i M140i F20 F21, M235i M240i F22 F23, 335i 340i F30 F31 F34, 435i 440i F32 F33 F36, M2 F87, M3 F80,M4 F82 F83Alpina models such as the B3Motorsport articles - without STVZO approval.

The Endless pads are an excellent brake pad for everyday road use with sporadic track days. Despite reduced dust and noise emissions, the MX72 impresses with excellent deceleration values even in the high temperature range. In contrast to the ME20 and ME22 pads, the MX72 has heat protection plates.Coefficient of friction 0.37 - 0.47 µOperating temperature 50 - 700 °CSemi-metallic pad For the rear axle. Compatible vehicles:BMW 4-piston BMW (Performance) brake caliper, blue caliper for F-series vehicles, e.g. M135i M140i F20 F21, M235i M240i F22 F23, 335i 340i F30 F31 F34, 435i 440i F32 F33 F36, M2 F87, M3 F80,M4 F82 F83Alpina models such as the B3Motorsport articles - without STVZO approval.

MOVIT DDE steel brake system 396x36mm (6 piston calliper) for the front axle, from 20 inch rims upwardsApplication-focussed development is the cornerstone of this high-performance brake system. The required balance of weight, performance and durability is optimally combined. The uncompromising selection of materials in production results in a highly unique product that meets the diverse requirements of extreme automotive applications. The most important features of the MOVIT brake system are- The progressive staggering of the piston diameters, matched to the vehicle, so that precisely parallel contact pressure between the pad and the disc is guaranteed. This enables even wear of the brake pads and ensures even heat transfer and a reduced system temperature.- Very good heat dissipation due to the open design of the brake pad contour.- Calipers manufactured from high-strength, highly tempered aircraft aluminium 7075 with high-quality material properties (stiffer components, more homogeneous structure), hard anodised and coated with a triple paint finish.- Optimised stability due to the length of the callipers- Larger brake disc diameter and thickness, more cross holes (each pre-cast hole is re-drilled and countersunk, which has a favourable effect on the flow).- The brake discs are thermally tempered.- The optimised DDE ventilation system (double directional evolvent system) of the brake disc has an 80% larger surface area compared to other brake discs, the temperature of the brake disc is significantly reduced and therefore also the wear.- Long service life of the wearing parts, excellent response behaviour, steel flex lines ensure consistent performance.- Optimally matched brake pads ensure fading resistance, a long service life and reduced wear on spare parts Attention: The conversion means that only rims with at least 20 inches can be fitted! The chassis number of the vehicle on which the brakes are fitted is required for the parts certificate. MOVIT sports brake callipers, 6s1, 6-piston- Milled from high-strength aircraft aluminium 7075- Two-piece- Use of maximum disc size due to long design- Significantly improved rigidity and extended contact surface of the pad- Uniform heat transfer- Reduced system temperature- Low, even pad wear- Progressive piston staggering- Crown system for fixing the brake hose- RAPAD-X system for quick brake pad replacement without removing the caliper from the bracket- Open brake pad track for optimised cooling- Maximum stability- Maximum braking force MOVIT sports brake discs, 396x36mm, 2-piece- Highly efficient DDE cooling system- Perforated for optimum response behaviour even on wet roads- Maximum fading resistance- Special alloy for high thermal conductivity MOVIT comfort brake pads, BE-6s1- Enlarged friction surface- Lower system temperature- Uniform heat transfer- Longer service life Scope of delivery:2x MOVIT brake caliper (left/right)2x MOVIT brake disc (left/right)2x vehicle-specific brake caliper adapter1x set of comfort brake pads2x steel flex lines1x assembly material1x installation instructions and running-in instructions1x parts certificate Compatible vehicles:Audi R8 type 420 -2018Audi S6 Type 4FBMW M2 F87BMW M3 E92BMW M4 F82BMW X5 E70Ford Mustang VI 2016- 2.3l EcoboostFord Mustang VI 5.0 V8 GT 2015-Mercedes Benz W906 Sprinter 3t & 3.5t

MOVIT DDE steel brake system 380x32mm (4 piston calliper) for the rear axle, from 19 inch rims upwardsApplication-focussed development is the cornerstone of this high-performance brake system. The required balance of weight, performance and durability is optimally combined. The uncompromising selection of materials in production results in a highly unique product that meets the diverse requirements of extreme automotive applications. The most important features of the MOVIT brake system are- The progressive staggering of the piston diameters, matched to the vehicle, so that precisely parallel contact pressure between the pad and the disc is guaranteed. This enables even wear of the brake pads and ensures even heat transfer and a reduced system temperature.- Very good heat dissipation due to the open design of the brake pad contour.- Calipers manufactured from high-strength, highly tempered aircraft aluminium 7075 with high-quality material properties (stiffer components, more homogeneous structure), hard anodised and coated with a triple paint finish.- Optimised stability due to the length of the callipers- Larger brake disc diameter and thickness, more cross holes (each pre-cast hole is re-drilled and countersunk, which has a favourable effect on the flow).- The brake discs are thermally tempered.- The optimised DDE ventilation system (double directional evolvent system) of the brake disc has an 80% larger surface area compared to other brake discs, the temperature of the brake disc is significantly reduced and therefore also the wear.- Long service life of the wearing parts, excellent response behaviour, steel flex lines ensure consistent performance.- Optimally matched brake pads ensure fading resistance, a long service life and reduced wear on spare parts Attention: The conversion means that only rims with at least 19 inches can be fitted! The chassis number of the vehicle on which the brakes are fitted is required for the parts certificate. MOVIT sports brake callipers, 4-piston- Milled from high-strength aircraft aluminium 7075- Two-piece- Use of maximum disc size due to long design- Significantly improved rigidity and extended contact surface of the pad- Uniform heat transfer- Reduced system temperature- Low, even pad wear- Progressive piston staggering- Crown system for fixing the brake hose- RAPAD-X system for quick brake pad replacement without removing the caliper from the bracket- Open brake pad track for optimised cooling- Maximum stability- Maximum braking force MOVIT sports brake discs, 380x32mm, 2-piece- Highly efficient DDE cooling system- Perforated for optimum response behaviour even on wet roads- Highest fading resistance- Special alloy for high thermal conductivity MOVIT comfort brake pads- Enlarged friction surface- Lower system temperature- Uniform heat transfer- Longer service life Scope of delivery:2x MOVIT brake caliper (left/right)2x MOVIT brake disc (left/right)2x vehicle-specific brake caliper adapter1x comfort brake pads2x steel flex lines1x handbrake calliper (depending on selected option)1x installation material1x installation instructions and running-in instructions1x parts certificate Compatible vehicles:BMW 2 Series (F87) Coupé M2 272kW / 370PS / 2979cm³ / N55BMW 3 Series (E92) Coupé M3 309kW / 420PS / 3999cm³ / S65BMW 4 Series (F82) Coupé M4 317kW / 431PS / 2979cm³ / S55

Suitable for the following models:BMW F87 M2 Competition 302kW/411hpBMW F80 M3 317kW/431hpBMW F80 M3 Competition 331kW/450hpBMW F80 M3 CS 338kW/460hpBMW F82/F83 M4 317kW/431hpBMW F82/F83 M4 Competition 331kW/450hpBMW F82 M4 CS 338kW/460hpBMW F82 M4 GTS 368kW/500hp The Wagner tuning Ø57mm charge pipe kit for the S55 engine. Discover the new Performance Ø57mm Charge Pipe Kit from Wagner Tuning for your S55 engine. Designed to maximize the performance of your vehicle while improving durability, this kit offers a range of advanced features that will give your vehicle a real performance boost. Features:Optimized fluid dynamics:Compared to the OEM Charge Pipes, Wagner Tuning Charge Pipes offer a larger flow diameter and minimize internal cross-sectional changes, resulting in 40% less backpressure. This relieves the turbochargers and improves the response behavior.Robust construction:The charge pipes are made entirely of aluminum and withstand high pressures as well as aging. Unlike OEM products, they do not burst under load.Special powder coating:The Charge Pipes are coated with a special textured powder coating that not only improves corrosion protection, but also ensures an OEM look. Advantages:Maximized performance:The Performance Charge Pipe Kit improves flow dynamics and reduces back pressure, resulting in increased engine performance and responsiveness.Durability:Thanks to the robust aluminum construction and high-quality powder coating, Charge Pipes offer long-term durability and reliability.Easy installation:The kit is easy to install and requires no complex modifications. With the included mounting hardware, installation is a breeze. Scope of delivery:2 aluminum charge air pipes (black coated)2 silicone adapters (black)4 stainless steel hose clamps1 mounting material1 parts certificate With parts certificate (for easy registration according to §19 paragraph 3 of the StVZO).

Revolutionise the performance of your 1 Series/2 Series/3 Series/4 Series (F Series) with our Competition Intercooler Kit EVO 1! Ready to take the performance of your vehicle to a whole new level? Our Competition Intercooler Kit EVO 1 has been specially developed to optimise the first power levels of engines and achieve an impressive increase in performance. Our intercooler has mesh dimensions of 520x210x130 (11,750 cm³) and offers an astonishing 64% larger flow area and an impressive 60% more charge air volume compared to the factory intercooler. Feel the increased power and improved acceleration. Our high performance mesh is characterised by a high quality Tube Fin mesh with internal turbulators. Despite its size, the entire intercooler weighs only 6.6 kg. The end boxes are made of high-quality cast aluminium and have been optimised using flow analyses in the CFD system. Our intercooler minimises the back pressure compared to the standard intercooler and thus ensures optimum performance. All our intercoolers are equipped with an anti-corrosion coating that ensures long-lasting and optimal cooling. Our kit is completely ready to install and allows for easy replacement with the factory intercooler - a true plug-and-play experience. You can continue to use the original charge air hoses. Now with parts certificate for many vehicles to ensure registration and legal safety. Like all our products, the Competition Intercooler Kit EVO 1 is subject to constant quality monitoring to ensure the highest standards. Prepare to conquer the road with your vehicle. Boost your car's performance, acceleration and driving experience with our Competition Intercooler Kit EVO 1. Whether you're on the motorway or tackling twisty roads, this kit will redefine your vehicles performance. Give your BMW more power and improved performance. Experience the power your vehicle deserves! The Competition Intercooler Kit EVO 1 is plug and play suitable for the following vehicles: BMW 114i F20 / F21 75KW/102PS (2012-2015) BMW 116i F20 / F21 100KW/136PS (2011-2015) BMW 116i F20 / F21 80KW/109PS (2015+) BMW 118i F20 / F21 125KW/170PS (2011-2015) BMW 118i F20 / F21 100KW/136PS (2015+) BMW 120i F20 / F21 130KW/177PS (2014-06/2016) * not suitable for B48 engine BMW 125i F20 / F21 160KW/218PS (2012-06/2016) * not suitable for B48 engine BMW M135i(x) F20 / F21 235-240KW/320-326PS (2011-2016) BMW 114d F20 / F21 70KW/95PS (2012+) BMW 116d F20 / F21 85KW/116PS (2011+) BMW 118d(x) F20 / F21 105-110KW/143-150PS (2011+) BMW 120d(x) F20 / F21 135-140KW/184-190PS (2011+) BMW 125d F20 / F21 160-165KW/218-224PS (2012+) BMW 218i F22 / F23 100KW/136PS (2015-2019) BMW 220i F22 / F23 135KW/184PS (2014-06/2016) * not suitable for B48 engine BMW 228i(x) F22 / F23 180KW/245PS (2014-06/2016) BMW M235i(x) F22/F23 240KW/326PS (2014-2016) BMW M2 F87 272KW/370PS (2016-2018) BMW 218d F22 / F23 103-110KW/143-150PS (2014-2019) BMW 220d(x) F22 / F23 135-140KW/184-190PS (20142019) BMW 225d F22 / F23 160-165KW/218-224PS (2014-2019) BMW 316i F30 / F31 / F34 100KW/136PS (2011-2015) BMW 318i F30 / F31 / F34 100KW/136PS (2015+) BMW 320i(x) F30 / F31 / F34 135KW/184PS (2011-2015) * not suitable for B48 engine BMW 328i(x) F30 / F31 / F34 180KW/245PS (2011-2015) BMW 335i(x) F30 / F31 / F34 225KW/306PS (2011-2015) BMW 316d F30 / F31 / F34 85KW/116PS (2012+) BMW 318d(x) F30 / F31 / F34 105KW/143PS (2012+) BMW 320d(x) F30 / F31 / F34 135-140KW/184-190PS (2011+) BMW 325d F30 / F31 / F34 160KW/218PS (2013+) BMW 328(x)d F30 / F31 / F34 135KW/184PS (2013+) BMW 330d(x) F30 / F31 / F34 190KW/258PS (2012+) BMW 335d(x) F30 / F31 / F34 230KW/313PS (2013+) BMW 418i F32 / F33 / F36 100KW/134PS (2016-) BMW 420i(x) F32 / F33 / F36 135KW/184PS (2013-2015) * not suitable for B48 engine BMW 428i(x) F32 / F33 / F36 180KW/245PS (2013-2016) BMW 435i(x) F32 / F33 / F36 225KW/306PS (2013-2016) BMW 418d F32 / F33 / F36 105-110KW/1143-150PS (2014+) BMW 420d(x) F32 / F33 / F36 135-140KW/184-190PS (2013+) BMW 425d F32 / F33 / F36 160-165KW/218-224PS (2014+) BMW 430d(x) F32 / F33 / F36 190KW/258PS (2013+) BMW 435d(x) F32 / F33 / F36 230KW/313PS (2013+) Scope of delivery: 1 charge air cooler 1 mounting material 1 assembly instructions 1 parts certificate

Maximise the performance of your vehicle with our EVO 2 high performance intercooler kit! Your vehicle deserves the best, and our EVO 2 High Performance Intercooler Kit will make sure you get just that. Here's what you can expect: The Wagner Tuning intercooler an amazing 68% larger flow area compared to the factory radiator. This means more fresh air for your engine and a noticeable increase in performance. Our kit offers an astonishing 90% more charge air volume than the standard cooler. This leads to improved combustion and ultimately more power and efficiency. Despite its impressive size, our intercooler weighs just 8.6kg. The end boxes of the cooler are made of cast aluminium and have been optimised with the help of flow analyses in the CFD system. This guarantees optimum air flow and minimises back pressure. Our competition high-performance mesh is a high-quality tube-fin mesh with internal turbulators, which ensures excellent cooling properties. All our intercoolers have an anti-corrosion coating with excellent heat conduction properties to ensure long-lasting and optimal cooling. Our kit is designed for easy installation and is a plug-and-play upgrade. You can continue to use your original charge air hoses, making installation even easier. The EVO 2 kit has been specifically designed to meet the high demands of the vehicle and is ready to take your performance to the next level. We subject all our products to rigorous quality control to ensure they meet the highest standards. Don't miss the chance to boost the performance of your vehicle. Visit our website for more information and to order your kit. The Competition Intercooler Kit EVO 2 is also plug and play suitable for the following vehicles: BMW 114i F20 / F21 75KW/102hp (2012-2015) BMW 116i F20 / F21 100KW/136hp (2011-2015) BMW 116i F20 / F21 80KW/109hp (2015+) BMW 118i F20 / F21 125KW/170hp (2011-2015) BMW 118i F20 / F21 100KW/136hp (2015+) BMW 120i F20 / F21 130KW/177hp (2014-06/2016) * not suitable for B48 engine BMW 125i F20 / F21 160KW/218hp (2012-06/2016) * not suitable for B48 engine BMW M135i(x) F20 / F21 235-240KW/320-326hp (2011-2016) BMW 114d F20 / F21 70KW/95hp (2012+) BMW 116d F20 / F21 85KW/116hp (2011+) BMW 118d(x) F20 / F21 105-110KW/143-150hp (2011+) BMW 120d(x) F20 / F21 135-140KW/184-190hp (2011+) BMW 125d F20 / F21 160-165KW/218-224hp (2012+) BMW 218i F22 / F23 100KW/136hp (2015-2019) BMW 220i F22 / F23 135KW/184hp (2014-06/2016) * not suitable for B48 engine BMW 228i(x) F22 / F23 180KW/245hp (2014-06/2016) BMW M235i(x) F22/F23 240KW/326hp (2014-2016) BMW M2 F87 272KW/370hp (2016-2018) BMW 218d F22 / F23 103-110KW/143-150hp (2014-2019) BMW 220d(x) F22 / F23 135-140KW/184-190hp (20142019) BMW 225d F22 / F23 160-165KW/218-224hp (2014-2019) BMW 316i F30 / F31 / F34 100KW/136hp (2011-2015) BMW 318i F30 / F31 / F34 100KW/136hp (2015+) BMW 320i(x) F30 / F31 / F34 135KW/184hp (2011-2015) * not suitable for B48 engine BMW 328i(x) F30 / F31 / F34 180KW/245hp (2011-2015) BMW 335i(x) F30 / F31 / F34 225KW/306hp (2011-2015) BMW 316d F30 / F31 / F34 85KW/116hp (2012+) BMW 318d(x) F30 / F31 / F34 105KW/143hp (2012+) BMW 320d(x) F30 / F31 / F34 135-140KW/184-190hp (2011+) BMW 325d F30 / F31 / F34 160KW/218hp (2013+) BMW 328(x)d F30 / F31 / F34 135KW/184hp (2013+) BMW 330d(x) F30 / F31 / F34 190KW/258hp (2012+) BMW 335d(x) F30 / F31 / F34 230KW/313hp (2013+) BMW 418i F32 / F33 / F36 100KW/134hp (2016-) BMW 420i(x) F32 / F33 / F36 135KW/184hp (2013-2015) * not suitable for B48 engine BMW 428i(x) F32 / F33 / F36 180KW/245hp (2013-2016) BMW 435i(x) F32 / F33 / F36 225KW/306hp (2013-2016) BMW 418d F32 / F33 / F36 105-110KW/1143-150hp (2014+) BMW 420d(x) F32 / F33 / F36 135-140KW/184-190hp (2013+) BMW 425d F32 / F33 / F36 160-165KW/218-224hp (2014+) BMW 430d(x) F32 / F33 / F36 190KW/258hp (2013+) BMW 435d(x) F32 / F33 / F36 230KW/313hp (2013+) Dimensions original intercooler: 510mmx130mmx110mm A= 7.293cm³ Wagner Tuning intercooler dimensions: 520mm x215mmx145mm / stepped A= 13.840cm³ Scope of delivery: 1 intercooler 1 mounting material 1 assembly instruction Attention: Not approved in the area of the StVZO.

The EVO III Competition intercooler kit fits the following vehicles with N55 engine:BMW F20/F21 M135i 235-240KW/320-326hp (2011-2016)BMW F22 M235i F22 240KW/326hp (2014-2016)BMW F87 M2 272KW/370hp (2015-2018)*Not suitable for xDrive models. Discover the new dimension of performance with the Wagner Tuning EVO3 Competition Intercooler Kit! Maximize the performance of your vehicle with the revolutionary Wagner Tuning EVO3 high performance intercooler kit. Designed for the most demanding tuning levels, this intercooler offers groundbreaking performance. The mesh dimensions of 510mm x 345mm x 180mm (stepped 23.56L) guarantee an impressive 165% larger flow area and an incredible 223% more charge air volume compared to the standard cooler. First-class technology for maximum performance! The Competition high-performance mesh relies on high-quality Tube Fin technology with internal turbulators. Despite its considerable size, the intercooler is lightweight and weighs only 13.8kg. The cast aluminium end boxes of the cooler have been optimized by flow analyses in the CFD system to ensure outstanding cooling properties with minimal back pressure. Components for extreme performance! The EVO3 kit was developed specifically for the requirements of the large tuning stages. The original click connections have been eliminated and the connection diameters have been increased to Ø65mm at the inlet and Ø76mm at the outlet. The kit includes two reinforced silicone hoses and an aluminum charge air pipe in Ø76mm. The result: optimum cooling of the supercharged air and a significant increase in performance! High-quality design for a long service life! Our intercoolers have an anti-corrosion coating that also has excellent heat conduction properties. This guarantees a long-lasting and optimum cooling effect with a noticeable increase in performance. The kit is completely ready to install and includes a modified crossbar. Simple replacement with standard parts is possible, although minor adjustments to the radiator support are necessary due to the extreme size. No more compromises - pure performance! The Wagner Tuning EVO3 Competition intercooler kit has been tested up to 6 bar and is absolutely pressure-stable. Our products are subject to continuous quality monitoring to ensure the highest standards. The kit is ideal for racing and sets new standards in terms of performance. Enrich your driving expertise and feel the power of progress. Get the Wagner Tuning EVO3 Competition intercooler kit! Dimensions original intercooler:510mm x 130mm x 110mmV=7.3 litersA=663 cm² Wagner Tuning intercooler dimensions:510mm x 345mm x 180mm [stepped]V=23.56 litersA=1759.5 cm² Scope of delivery:1 intercooler1 Ø76mm charge air pipe1 external air duct2 silicone hoses1 aluminum adapter1 crossbar1 mounting material1 assembly instructionsAttention: Not approved in the area of the StVZO.

Your vehicle is missing a data display! We have it - the CANchecked display for the F-series (F21, F22, F23, F30, F31, F32, F33, F80, F82, F83 and F87. Access to all data from the engine:The sensors are queried directly via Can Bus and are displayed on our tried-and-tested MFD28. The display for the E-series comes with a vehicle-specific cover and fits into the interior like an original part. This means that the ventilation through the slots remains intact. Our display emulates a manufacturer tester so that all detailed values are available. We have optimized the protocol to achieve maximum polling speed. Details:- integrates perfectly into the vehicle interior- Up to 128 sensors can be queried- 10 individually configurable views with our DSS - Display Setup Software- ready-made views for a quick start with our display- simply plug and play via our cable set - plug in, done- 4 additional analog inputs for exhaust gas temperature, oil pressure and more- Best readability - optional anti-reflective film included- Query the sensors like manufacturer diagnostic tools Performance meter:Measure your acceleration times in our performance widget - 0-100, 100-200, 0-200 Data jogging:Log all data to the internal SD card. Whether “on-demand” (start at the tap of a finger) or permanently. All data from your last turn is saved. Preset alarms:Preset alerts can be easily activated and customized. For example, receive a large warning message if the exhaust gas temperature is above 900 degrees. 4 additional analog inputs:Additional temperature and/or pressure sensors can be connected for further monitoring options. e.g. exhaust gas temperature or exhaust gas back pressure. An ethanol sensor can be connected to one of the digital inputs. Read out/delete errors:Read out errors from the engine control unit in plain text and also delete them Individual designWhether it's the individual start screen or the selection from a variety of different widgets. Make the display your display! Switch pages with the cruise control button:To make driving safer, we have integrated the cruise control switch here with the company Lightweight-Performance. When cruise control is not active, you can use the up/down button to switch the views in the display. This has the following advantages:- No “searching” for the display while concentrating on the road ahead- Switching even when wearing gloves (on trackdays)- Quick and safe checking of overview pages and then returning to the main viewDriver Dynamics:We have developed a special view for all track drivers who want to further improve their driving style and become a second or two faster:- G-forces (lateral and longitudinal acceleration)- Vehicle speed- Steering angle- accelerator pedal position- Brake pressure This sensor system gives the driver the opportunity to aim for even higher speeds in bends and to hit the braking point even later. Together with the data log in the internal memory, which can be downloaded from the display after a track day, this offers a great opportunity to synchronize the data with a video. Access to all data from the engine control unit:We supply your display with a ready-made TRI file as standard. All sensors that are queried are defined here. Temperatures:Engine water temperature, oil temperature, intake temperature, exhaust temperature, transmission temperature Pressures:Boost pressure, boost pressure target, fuel pressure high pressure pump, exhaust back pressure, low pressure, front brake pressure, rear brake pressure, oil pressure Lambda/mixture:Lambda value target/actual, injection correction, long-term lambda adjustment, total ignition angle, ignition angle per cylinder Other data:RPM, air mass (g/s), vehicle speed, throttle angle, battery voltage, gear, accelerator pedal position, longitudinal and lateral acceleration, steering angle, yaw angle, torque, power, boost pressure control valve activation If values are missing, they can easily be added. It always depends on the engine whether it supports the values, sometimes not all sensors are available. Attention: Not all values are available for all engines! For which engines and models is the display for F-series:The display fits the following vehicles:- 1 Series: F20, F21- 2 Series: F22, F23- 3 Series: F30, F31- 4 Series: F32, F33- M models: F87, F80, F82, F83 (Convertible) We currently support the following engines, unlisted engines can be added on request:- B48- B58- N13- N47- N55- N57- S55 The respective version for RHD (right-hand drive) is also available. The data may vary between the different engines. Read out and delete errors:Swipe down to access the “DTC” (Diagnostic Trouble Codes = fault memory). The display reads the fault memory from the engine. Optionally, you can also delete these directly on the display. Errors for the engine are displayed in plain text so that you can decide for yourself whether you can continue driving. MFD28 Technical data:- Dimensions: 70.3 x 52mm - Hardware: 2.8” TFT screen, touchscreen, MicroSD, MicroUSB- High-quality milled aluminum front frame- Symmetrical display - ideal for rotating it by 90- Views completely freely configurable on the PC with our DSS - Display Setup Software- Up to 64 widgets per display- 64 sensors (Can Bus + internal)- 10 views- 4x analog inputs- Optional external switching flash- Can bus switching- Can Bus protocols: UDS, KWP2000, OBD Supported values:Many customers always ask: “Which values can I query from my control unit”. The answer: “ALL”. Our MFD28 is compatible with ISO 11898-2 and SAE J2284.The control unit manufacturers themselves determine which values are sent via the CAN bus interface. The documentation is important here - possibly even in the form of a DBC file that can be imported directly. You can also access our extensive list of already implemented control units. This can be found in the download area. A total of up to 50 sensors can be queried if the manufacturer supports this.Broadcast data as well as OBD2 queries via Can Bus (11bit/29bit) are implemented. Special protocols such as TP2.0 from VW/Audi and UDS are also available. DSS - Display Setup Software:With our DSS - Display Setup Software, the display can be conveniently configured on the PC. The Can Bus protocol can be customized, you can import DBC files and design the displays with your own widgets.The log viewer downloads log files from the display. These can then be viewed and values can be individually selected and scaled.A built-in Can Bus logger makes it possible to take a close look at the log. This can be used to reverse-engineer unknown Can Buses.

Autotecknic dry carbon fibre diffuser for 2 Series F87 incl. Competition Compatible vehicles:BMW 2 Coupe (F22, F87) M2 2015-2018BMW 2 Coupe (F22, F87) M2 Competition 2018-2021

The 3DDesign carbon diffuser for the F87 is made of carbon fiber/carbon fiber and gives the rear of the vehicle a new shine in no time at all. Installation is extremely simple - but the effect is all the greater. The calm design of the diffuser emphasizes the elegance of the otherwise sporty vehicle. Incl. parts certificate Compatible vehicles:BMW 2 Coupe (F22, F87) M2 2015-2018BMW 2 Coupe (F22, F87) M2 CS 2019-2021BMW 2 Coupe (F22, F87) M2 Competition 2018-2021

The F87/F22's adaptive LED headlights are already aggressive with the angled 3/4-style etched rings, but the vehicle has left room for improvement. The Yellow DRL upgrade gives your car the race-inspired look it deserves. Details:- Complete Yellow DRL LED boards for left and right headlights- Thermally conductive adhesive- Plug-and-play installation (fully reversible)- All OEM functionalities are retained- Complete installation instructions- 2 year warranty- Not approved in the area of the StVZO. Only suitable for use in motorsport. Installation is very simple: the modules can be easily installed in your own garage using plug-and-play and simple tools. The price does not include installation. Compatible vehicles:BMW F87/F22 2 Series LCI LED only (2018-2021)Note: This is NOT an original BMW product!Note: This is NOT an original BMW product!

High-quality side skirt set for the F87 with material certificate - Improved performance through more downforce - Vacuum infusion technology for rigidity and low weight - High-gloss UV-protected clear coat to protect against sun damage - Products are supplied with all necessary assembly parts - Guaranteed accuracy of fit - Made in California, USA Push the boundaries of what's possible! Dare to show your individualism with our PSM Dynamic Aerodynamic Automotive Components! These creations are designed to provide more stability at high speeds, increase downforce and smooth airflow. All products are handcrafted from the finest materials. All of our products are designed to fit perfectly with the manufacturer's original lines, seamlessly blending style and performance in one amazing package. SPECIAL PRICE - STOCK SALE - only one piece in stock! Compatible vehicles:VehicleTypePowerEngine capacityEngineYear of constructionBMW 2 Series Coupe (F87)M2272kW / 370hp2979ccN55 B30 A11.15 - 06.18BMW 2 Series Coupe (F87)M2 Competition302kW / 411hp2979ccS55 B30 A06.18 - 06.21BMW 2 Series Coupe (F87)M2 CS331kW / 450hp2979ccS55 B30 A11.19 - 06.21

Eibach Pro-Kit performance suspension springs for front and rear axle E10-20-035-01-22 The Eibach Pro-Kit lowering springs are the ideal solution for your vehicle, as the kit lowers the centre of gravity, reduces rebound when accelerating, reduces body roll when cornering and dips when braking. As a result, understeer and oversteer no longer occur. Lowering the vehicle with the Pro-Kit springs reduces the standard distance between the tyres and the wheel arch and gives the vehicle a sporty look. In addition, the handling of the vehicle is maximised. The Eibach Pro-Kits are designed by Eibach suspension engineers and test experts to deliver a combination of sporty looks and performance without compromising on safety or ride quality. - Developed and tested for combination with standard and aftermarket dampers- Component of the Eibach Pro system- Top performance handling- Lowers the vehicle's centre of gravity by up to 40 mm (depending on the vehicle)- Spring design for traction and attraction- Progressive suspension characteristics- Performance handling- ABE or parts certificate Note: Only for vehicles without levelling control. Information:- Lowering front axle: approx. 25mm- Lowering rear axle: approx. 20mm- Type of approval: with expert opinion- Illustration may differ from the original Compatible vehicles:- Axle load front axle: up to 970kg- Axle load rear axle: up to 1080kg- EC type approval number: e1*2007/46*0377*09- Only for vehicles without levelling system BMW 2 (F87) M2 272kW / 370PS 7909-ABPBMW 2 (F87) M2 Competition 302kW / 411PS 7909-ABY/ACT

Facts: Material: Carbon Manufacturer: Eventuri Expert opinion: Material certificate The Eventuri carbon engine cover for F87 supports the intake system in a visual way. This cover is only designed for the F87, as an extra indentation is incorporated into which the original stripe can be inserted. However, this is not supplied with the cover, but must be taken from the original cover! The cover thus creates a unique carbon look in the blink of an eye and also ensures envious glances when looking under the bonnet.Compatible vehicles:VehicleTypePowerEngine capacityEngine typeYear of construction BMW 2 Series Coupe (F87)M2272kW / 370hp2979cm³N55 B30 A11.15 - 06.18

AutoTecknic Carbon Mudguard Trim - F87 Compatible vehicles:BMW 2 Coupe (F22, F87) M2 2015-2018

The 3DDesign carbon front lip for the F87 provides an even more aggressive look at the front of the vehicle in no time at all. The lip is made of carbon fibre/GRP and is not just visually impressive: it also increases the downforce on the front axle.Compatible vehicles:BMW 2 Coupe (F22, F87) M2 2015-2018

Suitable for the following models:BMW 2 Series (F22) CoupeM2 (F87) Aerodynamically very efficient wing for the F22 and F87. The wing can be adjusted in three stages to adapt to different routes. Adjustment takes seconds and requires no tools. Objective: Stabilizes straight-line stability and cornering at high speeds. - made of cnc-milled aluminium parts and high-quality carbon- finish: visible carbon polished | aluminium black anodized- three-stage adjustable- incl. mounting material- easy to install- very good visibility through the interior mirror- suitable for registration