Free shipping
info@aulitzkytuning.de
+49 (0)9874 6891630

KW V4 coilover suspension with HLS2 | fits Audi R8 (4S) incl. Spyder | 3A7102AM

€0.00*

Delivery time: Availability on request at Aulitzky Tuning*

Optional: Installation on site at Aulitzky Tuning

- Installation and removal of coilover suspension
- Wheel camber correction kit
- Wheel alignment
- Calibration of assistance systems/lights
- Individual suspension tuning according to customer requirements
- Individual test drive and adjustment together with the customer

Assembly at location DE-91564 Neuendettelsau
Reset choice
€0.00*
Product number: KW3A7102AM
Product information "KW V4 coilover suspension with HLS2 | fits Audi R8 (4S) incl. Spyder | 3A7102AM"

KW HLS Hydraulic Lift System

For easy driving over various obstacles for sporty cars with low ground clearance

More ground clearance at the touch of a button
With the HLS lift system, you can raise your sports car or lowered vehicle to safely drive over obstacles such as speed bumps, speed humps, level crossings, construction sites, garage and underground parking garage entrances. Depending on the version of the HLS lift system installed, either the front axle or both axles of your vehicle are raised hydraulically by up to 45 millimetres.
This prevents your aerodynamic components, underbody protection or even the oil pan from being damaged. Depending on the vehicle type and model, the lift system is available as a vehicle-specific solution with or without KW coilover suspension. If your vehicle is not yet included in our KW HLS product range, our engineers have also developed a universal lift system.

Convincing solution made by KW
Our HLS is available as an application-specific solution for a wide range of super sports cars and even for compact models. All the components supplied, such as the hydraulic lines and hydraulic pump, are adapted to your vehicle and therefore all our components harmonize perfectly with your sports car. Whether you combine the HLS with your standard suspension or with our KW coilovers in stainless steel, which are among the world's top aftermarket products, is up to you to decide. Alpina, BMW M, Manthey, Mercedes-Benz AMG, Novitec Rosso and many other well-known companies in the international automotive industry have already opted for KW.
The "HLS 2" version of the lift kit, which is only installed on the front axle, allows you to lift the front of your sports car. If you opt for the "HLS 4" variant, your entire vehicle will be lifted. For this purpose, a hydraulic cylinder is mounted between the spring plate and spring on each KW coilover strut. The great advantage of the hydraulic system is that there is no compression (movement) of the extended cylinder unit during driving (no unwanted additional suspension) and therefore the driving dynamics cannot be impaired. The scope of delivery for all HLS Lift Kit variants also includes a control unit that is connected to the vehicle's on-board electronics. As a result, the vehicle is automatically lowered to the original depth of the KW coilover suspension or your standard suspension from a certain speed.

- as a complete solution including KW coilover suspension
- or available as a retrofit kit
- Actuation from inside the vehicle via button with LED position indicator or optionally via radio remote control
- Can be activated while driving (up to 80 km/h)
- Quick lifting in 4-5 seconds with HLS 2
- Absolutely corrosion-resistant (coated aluminum cylinder components)

Please note the conditions and instructions for this product:
- VA + HA height-adjustable (threaded struts)
- Vehicles with electronic damper control must be decommissioned. Vehicle-specific KW decommissioning kits can be found in the accessories table.
- The dampers have easy-to-use adjustment wheels. Due to the design, the rebound stage can only be adjusted if the piston rod is accessible.
- Aluminum struts (no Inox-line)

Technical info:
Lowering VA/HA (mm): 10-25/15-35
Version: HLS 2
Mounting position hydraulics: VA
Material coilover suspension: aluminum
Height adjustment: rebound and compression
Adjustment VA/HA: thread/thread
Approval: parts certificate (§19.3)

Compatible vehicles:
Manufacturer Model Version Body Fuel Performance Displacement Cylinder Drive
AUDI R8 (4S) 4S3, 42 07/2015- 5.2 FSI Coupe Petrol 419 KW 5204 ccm 10 Rear-wheel drive
AUDI R8 (4S) 4S3, 42 07/2015- 5. 2 FSI quattro Coupe Petrol 397 KW 5204 ccm 10 All-wheel
AUDI R8 (4S) 4S3, 42 07/2015- 5.2 FSI quattro Coupe Petrol 419 KW 5204 ccm 10 All-wheel
AUDI R8 (4S) 4S3, 42 07/2015- 5.2 FSI quattro Coupe Petrol 449 KW 5204 ccm 10 All-wheel
AUDI R8 (4S) 4S3, 42 07/2015- 5. 2 FSI quattro Coupe Petrol 456 KW 5204 ccm 10 All-wheel drive
AUDI R8 (4S) 4S3, 42 07/2015- 5.2 FSI RWS Coupe Petrol 397 KW 5204 ccm 10 Rear-wheel drive
AUDI R8 (4S) 4S3, 42 07/2015- 5. 2 GT Coupe Petrol 456 KW 5204 ccm 10 Rear-wheel drive
AUDI R8 (4S) Spyder 4S9, 42 05/2016- 5.2 FSI Cabriolet Petrol 419 KW 5204 ccm 10 Rear-wheel drive
AUDI R8 (4S) Spyder 4S9, 42 05/2016- 5. 2 FSI quattro Cabriolet Petrol 397 KW 5204 ccm 10 All-wheel drive
AUDI R8 (4S) Spyder 4S9, 42 05/2016- 5.2 FSI quattro Cabriolet Petrol 419 KW 5204 ccm 10 All-wheel drive
AUDI R8 (4S) Spyder 4S9, 42 05/2016- 5.2 FSI quattro Cabriolet Petrol 449 KW 5204 ccm 10 All-wheel drive
AUDI R8 (4S) Spyder 4S9, 42 05/2016- 5.2 FSI quattro Cabriolet Petrol 456 KW 5204 ccm 10 All-wheel drive
AUDI R8 (4S) Spyder 4S9, 42 05/2016- 5.2 FSI RWS Cabriolet Petrol 397 KW 5204 ccm 10 Rear-wheel drive

Please enter a valid email address.
Please enter a valid question.
Fields marked with * are mandatory.

There aren't any asked questions yet.
Zuletzt gesehene Produkte

Zuletzt gesehene Produkte

Frontspoiler Performance Carbon | fits BMW M2 (G87) S58 | Aulitzky Tuning
The high-quality carbon fibre performance front spoiler is an excellent addition to significantly enhance the style of your vehicle. Unlike regular carbon fibre, pre-preg carbon is reinforced to increase strength and durability. It can also be a staggering 70% lighter than other carbon fibre options.Prepreg carbon is far more uniform than other types of carbon, meaning the likelihood of imperfections is drastically reduced. The manufacturing process eliminates unwanted air bubbles and results in a perfectly smooth and high-gloss finish. Details:- 100% pure prepreg carbon fibre construction- OEM-style weave- High gloss finish- Fit guarantee- with parts certificate according to §19.3 Scope of delivery:- 1x carbon front splitter with mounting material Compatible vehicles:BMW G87 2 Series M2 (2023+) Note: This is NOT an original BMW product!

€989.00*
Intake system Carbon | fits Lamborghini Huracan | Eventuri
Facts: Power increase: 12-15hp, 20Nm Material: Carbon Manufacturer: Eventuri Expertise: none The Lamborghini Huracan Eventuri intake system - form and function in sublime harmony. Our aim was to develop a flagship intake system and set a benchmark for this platform - by using organic curves and prepreg carbon fibre, the results speak for themselves. Gone are the impractical cuboid plastic airboxes. In their place is a beautifully engineered system that allows for a smoother airflow and unleashes the glorious roar of the V10 engine. Every detail has been considered, from the immaculate carbon fibre with integrated MAF pipes to the heat shields and bespoke silicone connectors. More power, improved throttle response and an exhilarating intake sound to enhance the Huracan driving experience. The Huracan requires a tune to make the intake work without Check Engine Light. This is due to the narrow MAF range that is set at the factory and is exceeded by the higher airflow offered by the intake manifolds. Power and torque are increased over a large part of the rev range, not just at the peak. On the road, this results in improved response at part and full throttle, with the car pulling much more eagerly to the redline. Compatible vehicles:VehicleTypePower outputDisplacementEngine capacity Lamborghini Huracan5.2 LP 580-25.2 LP 610-25.2 LP 610-4426kW / 580PS449kW / 610PS449kW / 610PS5204cm³CSJB, DKBDGFACSJB, DKB Lamborghini HuracanLP 640-2470kW / 640PS5204cm³DGFB Lamborghini Huracan5.2 Performante470kW / 640PS5204cm³DGFB

€2,684.00*
Front lip Carbon | fits BMW M2 Competition (F87) N55 | 3DDesign
The 3DDesign carbon front lip for the F87 provides an even more aggressive look at the front of the vehicle in no time at all. The lip is made of carbon fibre/GRP and is not just visually impressive: it also increases the downforce on the front axle.Compatible vehicles:BMW 2 Coupe (F22, F87) M2 2015-2018

€2,060.00*
Intake system Carbon | fits Mini JCW/GP (F54/F56) 306hp B48 | Eventuri
Facts:Power increase: 15-18hp, 17-20ft-lbMaterial: CarbonManufacturer: EventuriParts certificate: For this product a certificate is available for certain regions and vehicles (details below) The F5X JCW Eventuri intake system is a perfect example of our "Complete System" principle. It is a sealed system that ensures the turbo does not draw hot air from the engine bay, but is complemented with a functional cowl scoop that forces ambient air into the intake duct. This duct has a larger internal volume than the standard version and also draws in air at the standard point above the radiator. The combination of a closed system with an air scoop results in lower intake temperatures than the standard airbox and avoids heat sacks, which are a frequent problem, especially on more powerful MINIs. To ensure the smoothest possible flow, we use our patented Venturi filter housing, which has an integrated MAF section for a seamless flow path to the turbo. The Eventuri DifferenceThe F5X JCW Eventuri system uses our patented carbon fiber housing that provides an aerodynamically efficient airflow path from the filter to the turbo. It's not another cone filter with a heat shield, but a unique design that utilizes the Venturi effect and maintains laminar flow conditions to reduce turbo drag. Each intake system consists of:Carbon fiber venturi filter housing with integrated MAF pipeCustom high flow dry filterCarbon fiber inlet ductCarbon fiber inlet scoopCNC machined MAF bossLaser cut stainless steel brackets Parts certificateThe manufacturer's specifications apply for installation. An existing certificate is no guarantee that the product can also be installed in the corresponding vehicle. A certificate is available for this product for the following regions and vehicles:* DE/AT: Vehicle registration document, field K --- CH/LI: Vehicle registration document, field 24Countries Model Type approval*DE/AT F1H e1*2007/46*2018*..DE/AT F2GC e1*2007/46*2064*..DE/AT F2X e1*2007/46*1824*..DE/AT FMK e1*2007/46*1683*..DE/AT FML2 e1*2007/46*1678*..DE/AT FMX e1*2007/46*1682*.. Compatible vehicles:VehicleVehicle typePowerEngine capacityEngine typeYear of construction Mini Clubman (F54)JCW225kW / 306hp1998cm³B48 A20 E07.19 - Mini (F56)JCW GP225kW / 306hp1998cm³B48 A20 E03.20 -

€1,889.00*
Intake system Carbon | fits Mini Countryman JCW (F60) 306hp B48 | Eventuri
Facts:Power increase: 15-18hp, 17-20ft-lbMaterial: CarbonManufacturer: EventuriParts certificate: For this product a certificate is available for certain regions and vehicles (details below) Attention: The intake system comes without air intake! The F6X JCW Eventuri intake system is a perfect example of our "Complete System" principle. It is a sealed system that ensures the turbo does not draw in hot air from the engine bay, but is complemented with a functional cowl scoop that forces ambient air into the intake duct. This duct has a larger internal volume than the standard version and also draws in air at the standard point above the radiator. The combination of a closed system with an air scoop results in lower intake temperatures than the standard airbox and avoids heat sacks, which are a frequent problem, especially on more powerful MINIs. To ensure the smoothest possible flow, we use our patented Venturi filter housing, which has an integrated MAF section for a seamless flow path to the turbo. The Eventuri DifferenceThe F5X JCW Eventuri system uses our patented carbon fiber housing that provides an aerodynamically efficient airflow path from the filter to the turbo. It's not another cone filter with a heat shield, but a unique design that utilizes the Venturi effect and maintains laminar flow conditions to reduce turbo drag. Each intake system consists of:Carbon fiber venturi filter housing with integrated MAF pipeCustom high flow dry filterCarbon fiber inlet ductCarbon fiber inlet scoopCNC machined MAF bossLaser cut stainless steel brackets Parts certificateThe manufacturer's specifications apply for installation. An existing certificate is no guarantee that the product can also be installed in the corresponding vehicle. A certificate is available for this product for the following regions and vehicles:* DE/AT: Vehicle registration document, field K --- CH/LI: Vehicle registration document, field 24Countries Model Type approval*DE/AT F1H e1*2007/46*2018*..DE/AT F2GC e1*2007/46*2064*..DE/AT F2X e1*2007/46*1824*..DE/AT FMK e1*2007/46*1683*..DE/AT FML2 e1*2007/46*1678*..DE/AT FMX e1*2007/46*1682*.. Compatible vehicles:VehicleVehicle typePowerEngine capacityEngine typeYear of construction Mini Countryman (F60)JCW ALL4225kW / 306hp1998cm³B48 A20 E07.19 -

€1,607.00*