Free shipping
info@aulitzkytuning.de
+49 (0)9874 6891630

Competition intercooler kit EVO 2 | fits Porsche 911 (997.2) 3.6 Turbo 500hp 530hp | Wagner Tuning

€3,440.00*

Delivery time: approx. 1-5 working days*

place a request
Product number: WT200001080
Product information "Competition intercooler kit EVO 2 | fits Porsche 911 (997.2) 3.6 Turbo 500hp 530hp | Wagner Tuning"

The Wagner Tuning Competition intercooler kit EVO2 Upgrade Kit fits the following models:
Porsche 997 Turbo (2008+) 3,8L;368KW / 500hp facelift models only
Porsche 997 Turbo S (2008+) 3,8L;390KW / 530hp facelift models only

EVO 2 high-performance intercooler kit: The ultimate performance upgrade for your Porsche 997 Turbo

Experience the unbridled power of your Porsche 997 Turbo with our EVO 2 High Performance Intercooler Kit. Here's what this kit has to offer.

Our EVO 2 high performance intercoolers (2 x [330mm x 222mm x 145mm] = 21.244cm³) are designed to provide a whopping 77% more charge air volume than the factory intercoolers. This means a significant increase in the performance of your vehicle. Our specially developed competition high performance mesh ensures excellent cooling characteristics. Even under extreme conditions, your engine will maintain the optimum temperature. Despite its impressive performance, our intercooler kit is surprisingly light. Each of the two coolers weighs just 2 x 6.7 kg, which helps to reduce weight in addition to increasing performance.

CAD-developed free-form end boxes made of cast aluminum ensure the best possible internal air flow and a high pressure resistance of up to 6 bar (tested). Our kit includes a custom-fit carbon air duct which ensures that the intercooler is optimally supplied with fresh air. This is crucial for the maximum performance of your vehicle. The kit includes additional silicone hoses with an enlarged cross-section to optimize the airflow.

Our intercoolers are coated with an anti-corrosion coating that not only ensures longevity, but also has excellent heat conduction properties. Our kit comes complete with new carbon air guides, silicone hoses and aluminum adapters. Installation is simple and is done in exchange for the factory intercoolers. This kit is specifically designed for racing and features a 70mm inlet and outlet for maximum performance.

Get the most out of your Porsche 997 Turbo with our EVO 2 high performance intercooler kit. Visit our website for more information and to order your kit.

Advantages of the Wagner Tuning intercooler:
- improved cooling performance
- 77% more charge air volume
- extended to 70 mm inlet and outlet
- Precisely fitting carbon air duct
- simple replacement

Scope of delivery:
2 intercoolers
4 carbon air ducts
4 silicone hoses
4 hose clamps
1 mounting material

Attention: Not approved in the area of the StVZO.

Please enter a valid email address.
Please enter a valid question.
Fields marked with * are mandatory.

There aren't any asked questions yet.
Zuletzt gesehene Produkte

Zuletzt gesehene Produkte

KW V1 coilover suspension inox | fits Audi RS4 quattro B5 | 10210021
KW V1 coilover suspension Sportiness paired with outstanding looks. With factory pre-configured damping.Our entry-level model for more driving pleasure through an appealing and individually adjustable lowering is the KW V1 coilover suspension in the KW typical "inox-line". Thanks to its high-quality workmanship, the consistent use of stainless steel struts, corrosion-resistant springs and harmonised components, it stands for many years of driving pleasure - and not just for the life of the car. Stepless loweringThe KW V1 enables maximum lowering within the tested adjustment range. This varies depending on the vehicle model and can, for example, be between 30 and 70 millimetres or 50 to 90 millimetres for an individual lowering. Thanks to the dirt-resistant trapezoidal thread and the polyamide threaded ring, the stepless lowering can be varied quickly and easily even years later. Depending on the vehicle, the lowering is carried out either on the wheel-guiding KW stainless steel suspension struts or on the rear axle height adjustment for non-wheel-guiding double-wishbone rear axles. The benchmark for sporty, dynamic tuning fansWith its harmonious basic set-up for sporty driving on the road, the KW V1 convinces the discerning tuning fan. Our development engineers determine a specific damper set-up and spring rate for each vehicle in order to increase your driving pleasure with the optimum balance of sportiness and suitability for everyday use. After all, you are not buying just any coilover suspension, but a KW coilover suspension that has been specially developed and tuned for your vehicle type. As a manufacturer, KW only uses its own resources, high-quality components and the same damper technology as mass-produced manufacturers. With the KW V1, the rolling and rolling movements of the vehicle body are reduced during compression, allowing you to benefit from unadulterated directness and sportier handling when driving. Our experience for your driving pleasureAs a manufacturer of customised suspension solutions for road and racing, we have been the market leader and innovation driver for over 25 years. No matter where in the world, sporty drivers, car manufacturers and tuners rely on our KW coilovers "Made in Germany". Every KW coilover suspension is subjected to extensive load tests during production and is developed and manufactured directly at our company headquarters in Fichtenberg, Swabia, in order to fulfil the high standards of our KW quality management. As a German manufacturer, it is a matter of course for us to provide a multi-year warranty on our KW coilover suspension kits, which exceed OEM quality and cover over 4,600 applications. When installed by one of our KW specialist dealers, this warranty is valid for up to five years. - Optimally adjusted in advance- sporty and harmonious damping technology- Stainless steel technology "inox-line"- Individually height-adjustable- Tested adjustment range- Ready-to-install complete solution- High-quality components for a long service life- Complete documentation for easy handling Setup - factory pre-configured damping setupThe KW V1 has a vehicle-specific, permanently configured damper setup. The spring and the damper are perfectly matched to each other so that you experience an optimum balance of sportiness and suitability for everyday use when driving. Even with a full payload and maximum axle loads, the dampers always work with a sporty characteristic curve. The KW V1 is particularly interesting for tuning enthusiasts who prioritise the show & shine concept. Please note the conditions and instructions for this product: - VA + HA height-adjustable (threaded struts) - With variant 2 or variant 3, hardness adjustment also possible on the VA only when removed! Technical information: Lowering VA/HA (mm): 10-30/10-30 Version: V1 Hardness adjustment: none Material: stainless steel Adjustment VA/HA: thread/thread Approval: parts certificate (§19.3) Compatible vehicles: Manufacturer Model Version Body Fuel Performance Displacement Cylinder Drive AUDI A4 Avant (B5) 8D5, B51 11/1994-12/2002 RS4 quattro station wagon Petrol 280 KW 2671 ccm 6 All-wheel drive

€1,333.99*