Silicone hose kit | fits Ford Focus Mk2 ST 225hp | Wagner Tuning

The Wagner Tuning Performance intercooler kit fits the following vehicle:Ford Focus ST MK2 2008-2010 faceliftFord Focus ST MK2 2005-2008 pre-facelift Welcome to the future of performance: The Wagner Tuning Performance high performance intercooler for the Ford Focus MK2. Get ready for a performance revolution in your Ford Focus MK2. Our Performance high performance intercooler sets new standards in cooling and performance. With impressive net dimensions (730mm x 300mm x 70mm = 15.3 liters), this cooler not only offers a generous 100% larger intake area, but also an impressive 125% increase in charge air volume compared to the original intercooler. At the heart of this cooler is our exclusive high performance mesh. It has been developed to ensure optimum airflow and offers outstanding cooling properties. The free-form end boxes, precisely developed in CAD and made of high-quality cast aluminum, ensure the best possible internal airflow. The intercooler offers less back pressure than the standard radiator and has extended connection diameters of 66mm. The kit includes reinforced silicone hoses that are perfectly matched to the new connections. Installation is extremely simple, as our performance intercooler is supplied as a complete kit. Replacement with the standard intercooler is straightforward and requires no complex adjustments. This kit has been tested to up to 6 bar and is absolutely pressure-stable. Our intercooler also has an anti-corrosion coating with outstanding heat conduction properties. This not only guarantees optimum cooling, but also a significant increase in performance for your Ford Focus MK2. Ready to dominate the roads with impressive power? Order now and experience the future of performance technology. Your Ford Focus MK2 will thank you with every acceleration. Advantages of the Wagner Tuning intercooler:- improved cooling performance- 100% larger inflow area- 125% charge air volume- flow-optimized- Lower back pressure- Plug & Play Scope of delivery:1 intercooler2 silicone hoses2 hose clamps1 mounting material1 assembly instruction Attention: Not approved in the area of the StVZO.

H&R coilover springs for the G99 Touring H&R coil springs are specially tuned to deliver noticeably better performance in everyday use without any significant loss of comfort. Details: Front lowering: 25-35 mm Rear lowering: 20-30 mm Axle load: Front up to 1475 kg / Rear up to 1670 kg For standard dampers with and without electric adjustment With parts certificate Product overview: Sporty look and performance Stepless lowering of the vehicle's center of gravity (within the tested adjustment range) For standard dampers with and without electric adjustment Function of electrically adjustable dampers remains unrestricted Optimized driving dynamics With parts certificate Developed and produced in Germany Compatible vehicles: BMW M5 G99 (Touring) 4.4l 535kW plug-in hybrid all-wheel drive (585 hp)

H&R lowering springs for the G90 Sedan H&R sport spring sets are the ideal solution if you want to optimize the handling of your vehicle and achieve a sporty look while maintaining the standard driving comfort. Details: Lowering front/rear: 20/10 mm Axle load: front up to 1475 kg / rear up to 1550 kg For standard dampers with and without electric adjustment With type part approval Product advantages: Sporty look and performance Lowering of the vehicle's center of gravity Linear or progressive suspension characteristics Can be combined with standard or retrofit dampers Optimized driving dynamics With ABE or parts certificate Surface protection through powder coating Developed and manufactured in Germany Compatible vehicles: BMW M5 G90 (Sedan) 4.4l 535kW plug-in hybrid all-wheel drive (585 hp)

Facts: Material: Carbon Manufacturer: Eventuri The Eventuri philosophy of challenging the standard for existing aftermarket solutions is also reflected in the panel filters. The best design, relentless testing to perfection and the latest prototyping methods result in an exceptional product. With the panel filters, the focus is on performance, which is guaranteed by CFD analyses, airflow tests, inlet temperatures and extensive dyno tests. Each panel filter is designed to fit into the OEM filter housings. Compatible vehicles:VehicleTypePowerEngine capacityEngine typeYear of construction BMW X3 (F97)M353kW / 480hp2993cm³S58 B30 A03.19 -BMW X4 (F98)M353kW / 480hp2993cm³S58 B30 A03.19 -

Facts: Power increase: 13-17PS, 15-20ft-lbV box Acceleration: 60-130mph reduced by 0.5 seconds Material: Carbon fibre Manufacturer: Eventuri Expertise: without The intake for the Audi B9 S4/S5 from Eventuri has been developed to give the turbo a less restrictive airflow while maintaining low inlet temperatures. The S5/S4 engine bay heats up very quickly, so an open system would result in better airflow but at higher inlet temperatures. Therefore, the airflow path from the front grille to the turbo inlet has been completely redesigned with a highly efficient, sealed system. The restrictive OEM airbox and the flexible plastic pipe have been replaced by a Venturi filter housing and a duct system with smooth transitions. In addition, by removing the pleated OEM pipe and replacing the filter with our patented one-piece venturi housing and rigid pipe, the airflow is much smoother as it enters the turbo inlet. The resulting increase in performance and aesthetics are ground-breaking innovations for this platform. The Eventuri difference The B9 S4/S5 Eventuri system uses our patent-pending carbon fibre housings with our bespoke Gen 2 filter, providing an aerodynamically efficient airflow path from the filter to the inlets. Not just another filter with a heat shield, but a unique design that creates the Venturi effect. The intake was VBOX tested on the road to record acceleration from 60-130mph (and 100-200Km/h). The tests were carried out on the same track - and on the same day to minimise the variables. The results show that acceleration times from 60-130mph have reduced by almost 0.5 seconds, which is a significant improvement at such speeds. This shows that the gains measured on the dyno are not representative of how the intake behaves on the road when it has the correct flow conditions - on the road the intake shows a greater gain by reducing acceleration times compared to the dyno. Summary of acceleration results: 60-130mph with original airbox = 14.72 seconds 60-130mph with Eventuri intake = 14.24 seconds 100-200mph with original airbox = 12.45 seconds 100-200mph with Eventuri intake = 12.12 seconds The improvements result from a combination of reasons: 1) The closed system keeps IATs low - especially with the front air scoop forcing air into the system. 2) The venturi housing provides a smooth transition from the filter to the intake manifold without friction. This helps the turbo to run more efficiently by maintaining laminar flow in the inlet section. 3) The entire system is made of pure pre-preg carbon fibre, which is excellent for thermal insulation. Compatible vehicles:VehicleTypePower outputEngine capacityEngine size Audi A4 (B9/8W)S4 quattro260kW / 354PS2995cm³CWGD Audi A5 (B9/F5)S5 quattro260kW / 354PS2995cm³CWGD

Facts:The intake generates +17 hp / +19 Nm with a series M4Material: CarbonManufacturer: EventuriParts certificate: A certificate is available for this product for certain regions and vehicles (details below) ATTENTION: The variant with the aluminum scoops is the V1 Cariante, i.e. without the closed ducts. In an effort to make their products as good as possible for every customer and every application, the well-known intake system F-series has been revised.A new feature is the completely closed air duct, as opposed to the semi-open one in the old system. For all owners of the old system, there is now an upgrade kit with which the half-open air ducts can be closed. In the “Carbon” version, the intake is always the new, closed V2 intake. The Eventuri carbon intake system was developed to increase engine performance, improve handling and enhance the overall driving experience. With an inverted cone-shaped filter, enclosed in a carbon/Kevlar housing, Eventuri utilizes the so-called Venturi effect. The result is an even laminar airflow, which not only provides more power but also better responsiveness and a new sound experience.the airbox is manufactured using the pre-preg process. The intake generates +17 hp / +19 Nm with a standard vehicle. An official parts certificate is included. Parts certificateThe manufacturer's specifications apply to installation. An existing certificate is no guarantee that the product can also be installed in the corresponding vehicle. A certificate is available for this product for the following regions and vehicles:* DE/AT: Vehicle registration document, field K --- CH/LI: Vehicle registration document, field 24Country Model Type approval*CH/LI BMW M3 1BF119CH/LI BMW M3 1BG467CH/LI BMW M3 1XK810CH/LI BMW M3 GTS 1BG950CH/LI BMW M4 1BF120CH/LI BMW M4 1BJ693CH/LI BMW M4 1BJ696CH/LI BMW M4 1BJ927CH/LI BMW M4 Convertible 1BF695CH/LI BMW M4 Convertible 1BF929CH/LI BMW M4 Convertible 1BJ694CH/LI BMW M4 Convertible 1XR665CH/LI BMW M4 CS 1BJ931 Compatible vehicles:VehicleVehicle typePowerEngine capacityEngine typeYear of construction BMW 3er (F80)M3317kW / 431hp2979cm³S55 B30 A03.14 - 10.18 BMW 3er (F80)M3 Competition331kW / 450hp2979cm³S55 B30 A03.16 - 10.18 BMW 3er (F80)M3 CS338kW / 460hp2979cm³S55 B30 A01.18 - 10.18 BMW 4er (F82/F83)M4317kW / 431hp2979cm³S55 B30 A03.14 - 07.20 BMW 4er (F82/F83)M4 Competition331kW / 450hp2979cm³S55 B30 A03.16 - 07.20 BMW 4er Coupe (F82)M4 CS338kW / 460hp2979cm³S55 B30 A07.17 - 06.19 BMW 4er Coupe (F82)M4 GTS368kW / 500hp2979cm³S55 B30 A03.16 - 06.19

The Wagner Tuning Competition intercooler kit fits the following vehicle:Ford Mondeo MK4 2,5T 162KW/220hp (2007-2010) Get the best out of your vehicle with our Competition high performance intercooler! Our Competition high performance intercooler sets new standards in terms of performance and cooling. With impressive mesh dimensions of 640mm x 200mm x 110mm (14,080cm³), it offers a 24% larger flow area and a charge air volume that is 60% larger than the standard intercooler. With our competition high-performance network, you can rely on outstanding cooling properties. The intercooler has been developed using state-of-the-art CAD technology with free-form cast aluminum end boxes to ensure the best possible internal airflow. The result is an intercooler that has a significantly lower back pressure than the standard intercooler. The weight of the intercooler is a light 10.5 kg, which contributes to improved vehicle dynamics. All our charge air coolers are coated with a high-quality anti-corrosion coating, which not only protects against environmental influences, but also has excellent heat conduction properties. This ensures optimum cooling and you benefit from a significant increase in performance. Installation is child's play thanks to our completely ready-to-fit kit - simply replace it with the standard intercooler and get started. The connection diameter is 65 mm on both sides to ensure an optimum air supply. Our competition high-performance intercooler has undergone intensive testing and is pressure-stable up to 6 bar. Quality is our top priority, which is why all our products are subject to continuous quality monitoring. The advantages at a glance:- Impressive increase in performance for your vehicle- Larger inflow area for optimum cooling performance- Lightweight for improved vehicle dynamics (10.5 kg)- Lower back pressure for improved performance- High-quality anti-corrosion coating with heat conduction properties- Plug-and-play installation for easy installation- Tested and pressure stable up to 6 bar- Quality monitoring for reliable performance Take your vehicle's performance to the next level with our Competition high-performance intercooler. Experience optimal cooling and impressive performance at every race! Scope of delivery:1 intercooler1 mounting material1 installation instruction