Strut brace Carbon | fits BMW M2/M3/M4 incl. Competition/CS/CSL (G80/G81/G82/G83/G87) | Aulitzky Tuning

KW V1 coilover suspension Sportiness paired with outstanding looks. With factory pre-configured damping.Our entry-level model for more driving pleasure through an appealing and individually adjustable lowering is the KW V1 coilover suspension in the KW typical "inox-line". Thanks to its high-quality workmanship, the consistent use of stainless steel struts, corrosion-resistant springs and harmonised components, it stands for many years of driving pleasure - and not just for the life of the car. Stepless loweringThe KW V1 enables maximum lowering within the tested adjustment range. This varies depending on the vehicle model and can, for example, be between 30 and 70 millimetres or 50 to 90 millimetres for an individual lowering. Thanks to the dirt-resistant trapezoidal thread and the polyamide threaded ring, the stepless lowering can be varied quickly and easily even years later. Depending on the vehicle, lowering is carried out either on the wheel-guiding KW stainless steel suspension struts or, in the case of non-wheel-guiding double-wishbone rear axles, on the rear axle height adjustment. The benchmark for sporty, dynamic tuning fansWith its harmonious basic set-up for sporty driving on the road, the KW V1 convinces the discerning tuning fan. Our development engineers determine a specific damper set-up and spring rate for each vehicle in order to enhance your driving pleasure with the optimum balance of sportiness and suitability for everyday use. After all, you are not buying just any coilover suspension, but a KW coilover suspension that has been specially developed and tuned for your vehicle type. As a manufacturer, KW only uses its own resources, high-quality components and the same damper technology as mass-produced manufacturers. With the KW V1, the rolling and rolling movements of the vehicle body are reduced during compression, allowing you to benefit from unadulterated directness and sportier handling when driving. Our experience for your driving pleasureAs a manufacturer of customised suspension solutions for road and racing, we have been the market leader and innovation driver for over 25 years. No matter where in the world, sporty drivers, car manufacturers and tuners rely on our KW coilovers "Made in Germany". Every KW coilover suspension is subjected to extensive load tests during production and is developed and manufactured directly at our company headquarters in Fichtenberg, Swabia, in order to fulfil the high standards of our KW quality management. As a German manufacturer, it is a matter of course for us to offer a multi-year warranty on our KW coilover suspension kits, which exceed OEM quality and cover over 4,600 applications. When installed by one of our KW specialist dealers, the warranty is up to five years. - Optimally adjusted in advance- sporty and harmonious damping technology- Stainless steel technology "inox-line"- Individually height-adjustable- Tested adjustment range- Ready-to-install complete solution- High-quality components for a long service life- Complete documentation for easy handling Setup - factory pre-configured damping setupThe KW V1 has a vehicle-specific, permanently configured damper setup. The spring and damper are perfectly matched to each other so that you experience an optimum balance of sportiness and suitability for everyday use when driving. Even with a full payload and maximum axle loads, the dampers always work with a sporty characteristic curve. It is interesting to note that the KW V1 is particularly popular with tuning enthusiasts who prioritise the idea of show & shine. Please note the conditions and instructions for this product:- VA + HA height-adjustable (VA coilover struts, HA springs with height adjustment + damper) Technical information:Lowering VA/HA (mm):5-30/0-30Version: V1Hardness adjustment: noneMaterial: Stainless steelAdjustment VA/HA: thread/threadApproval: Parts certificate (§19.3) Compatible vehicles:Manufacturer Model Version Body Fuel Performance Displacement Cylinder DriveMERCEDES-BENZ C-KLASSE T-Model (S204) 204 K, 204 K AMG 08/2007-08/2014 C 63 AMG Estate Petrol 373 KW 6208 ccm 8 Rear-wheel driveMERCEDES-BENZ C-KLASSE T-Model (S204) 204 K, 204 K AMG 08/2007-08/2014 C 63 AMG Estate Petrol 383 KW 6208 ccm 8 Rear-wheel driveMERCEDES-BENZ C-CLASSE T-Model (S204) 204 K, 204 K AMG 08/2007-08/2014 C 63 AMG (204.277) Estate Petrol 336 KW 6208 ccm 8 Rear-wheel driveMERCEDES-BENZ C-CLASSE T-Model (S204) 204 K, 204 K AMG 08/2007-08/2014 C 63 AMG (204.277) Estate petrol 358 KW 6208 ccm 8 rear-wheel drive

To increase strength and durability, prepreg carbon fibre is reinforced in contrast to normal carbon fibre and can still be 70% lighter than other carbon options. A decisive advantage in terms of weight saving. Prepreg carbon fibre is far more consistent in quality, so the likelihood of imperfections is greatly reduced. The manufacturing process eliminates unwanted air bubbles and results in a perfectly smooth and high-gloss finish. Key features:- 100% pure prepreg carbon fibre- OEM style weave- High gloss finish- Fitment guarantee- 1 year warranty - With parts certificate according to §19.3 Scope of delivery:1x performance front splitter made of glossy prepreg carbon fiber incl. mounting material Compatible vehicles:BMW G80 M3 Sedan (2021+)BMW G80 M3 Competition Sedan (2021+)BMW G81 M3 Touring (2023+)BMW G81 M3 Competition Touring (2023+)BMW G82 M4 Coupe (2021+)BMW G82 M4 Competition Coupe (2021+)BMW G83 M4 Convertible (2021+)BMW G83 M4 Competition Convertible (2021+) Note: This is NOT an original BMW product!

The high-quality Edition 1 carbon fibre side skirt is a great addition to significantly increase the style and aggressiveness of your vehicle. Unlike regular carbon fibre, prepreg carbon is reinforced to increase strength and durability. It can also be a staggering 70% lighter than other carbon fibre options.Prepreg carbon is far more uniform than other types of carbon, meaning the likelihood of imperfections is drastically reduced. The manufacturing process eliminates unwanted air bubbles and results in a perfectly smooth and high-gloss finish. Details:- 100% pure prepreg carbon fibre construction- OEM-style weave- High gloss finish- Fit guarantee- with parts certificate according to §19.3 Scope of delivery:- 1x pair of side skirts incl. moutning material Compatible vehicles:BMW G87 2 Series M2 Note: This is NOT an original BMW product!

The EVO 3 Competition intercooler kit fits the following vehicles with N55 engine:BMW F30 / F31 / F34 335i 225KW/306hp (2012-2015)BMW F32 / F36 435i 225KW/306hp (2013-2016)*Not suitable for xDrive models. This impressive intercooler sets new standards and was specially developed for the high demands of the large tuning stages. With mesh dimensions of 510mm x 345mm x 180mm (stepped 23.56L), our intercooler offers a 165% larger flow area and a whopping 223% more charge air volume than the original intercooler. The high-quality competition high-performance mesh with internal turbulators ensures optimum cooling performance. Despite its impressive size, the entire intercooler weighs just 13.8 kg, which underlines its efficiency and lightweight construction. The cast aluminium end boxes of the intercooler have been optimized using flow analyses in the CFD system to ensure excellent cooling properties with minimal back pressure. Our EVO 3 kit eliminates the original click connections and increases the connection diameters at the inlet to Ø65mm and at the outlet to Ø76mm. In addition, the kit includes reinforced silicone hoses and an aluminum charge air tube in Ø76mm. The result is unsurpassed cooling performance with a significant increase in power. Our intercoolers are all coated with a high-quality anti-corrosion coating, which not only ensures protection against environmental influences, but also has excellent heat conduction properties. This ensures long-lasting and optimum cooling. Our intercooler kit is supplied complete and is ready to install. Replacement with the standard parts is easy thanks to the modified crossbar supplied. Due to the extreme size of the intercooler, minor adjustments to the radiator support may be required. Our high-performance charge air cooler has been tested under extreme conditions and is pressure-stable up to 6 bar. Each of our products is subject to constant quality monitoring to ensure maximum reliability. This intercooler is the perfect choice for racing and allows your vehicle to set new standards in terms of power and performance. Advantages of the Wagner Tuning intercooler:- improved cooling performance- 165% larger inflow area- 223% more charge air volume- efficient and lightweight (13.8 kg)- flow-optimized- inlet extended to Ø65mm and outlet extended to Ø76mm- Plug & Play Dimensions original intercooler:510mm x 130mm x 110mmV=7.3 litersA=663 cm² Wagner Tuning intercooler dimensions:510mm x 345mm x 180mm [stepped]V=23.56 litersA=1759.5 cm² Scope of delivery:1 intercooler1 Ø76mm charge air pipe1 external air duct2 silicone hoses1 aluminum adapter1 crossbar1 mounting material1 assembly instructionsAttention: Not approved in the area of the StVZO.

CSF Race water cooler for BMW E9x Triple Pass cooler With CSF's exclusive B-Tube technology and 6.5 mm multi-fin height, 1-hour polished mirror finish, CNC-machined mounting bracketsTrue drop-in fit: no adjustments during installation CSF manufactures the most advanced and efficient radiator cores in the industry by using innovative tube and fin technologies with industry-leading testing methods to maximize airflow and heat dissipation. These techniques allow CSF to stay ahead of the curve in radiator technology! “B-Tube” technologyIn contrast to a normal “O” type oval radiant tube, CSF uses a specially developed tube in the shape of a “B”. These “B-Tubes” are carefully formed and then soldered over the seam to seal it. CSF is able to use thinner and lighter aluminum material (better cooling efficiency) because this design is actually stronger than normal “O” shape tubes that are welded. The design (inlet in the center of the tube which is seam brazed) increases the heat transfer surface area of the tubes by approximately 15% over normal tubes. You get the efficiency of 2 smaller tubes versus 1 large tube with the same space criteria. With “B-Tubes” you can get “Dual Liquid Laminar Flow”. High Efficiency Multi Louvered FinCSF uses high efficiency multi-louvered fins that are carefully and precisely aligned to maximize airflow through each radiator core. Fin specifications are carefully measured and calculated for each application and tested in our wind tunnel lab for maximum heat dissipation efficiency. Compatible vehicles:BMW 3 (E90) M3 2007-2011BMW 3 (E90) M3 CRT 2011-2011BMW 3 Convertible (E93) M3 2008-2013BMW 3 Coupe (E92) M3 2007-2013BMW 3 Coupe (E92) M3 GTS 2007-2013