Free shipping
info@aulitzkytuning.de
+49 (0)9874 6891630

KW V1 coilover suspension inox | fits Mercedes-Benz C63 AMG T-Model (S204) | 10225035

€0.00*

Delivery time: Availability on request at Aulitzky Tuning*

Optional: Installation on site at Aulitzky Tuning

- Installation and removal of coilover suspension
- Wheel camber correction kit
- Wheel alignment
- Calibration of assistance systems/lights
- Individual suspension tuning according to customer requirements
- Individual test drive and adjustment together with the customer

Assembly at location DE-91564 Neuendettelsau
Reset choice
€0.00*
Product number: KW10225035
Product information "KW V1 coilover suspension inox | fits Mercedes-Benz C63 AMG T-Model (S204) | 10225035"

KW V1 coilover suspension

Sportiness paired with outstanding looks. With factory pre-configured damping.
Our entry-level model for more driving pleasure through an appealing and individually adjustable lowering is the KW V1 coilover suspension in the KW typical "inox-line". Thanks to its high-quality workmanship, the consistent use of stainless steel struts, corrosion-resistant springs and harmonised components, it stands for many years of driving pleasure - and not just for the life of the car.

Stepless lowering
The KW V1 enables maximum lowering within the tested adjustment range. This varies depending on the vehicle model and can, for example, be between 30 and 70 millimetres or 50 to 90 millimetres for an individual lowering. Thanks to the dirt-resistant trapezoidal thread and the polyamide threaded ring, the stepless lowering can be varied quickly and easily even years later. Depending on the vehicle, lowering is carried out either on the wheel-guiding KW stainless steel suspension struts or, in the case of non-wheel-guiding double-wishbone rear axles, on the rear axle height adjustment.

The benchmark for sporty, dynamic tuning fans
With its harmonious basic set-up for sporty driving on the road, the KW V1 convinces the discerning tuning fan. Our development engineers determine a specific damper set-up and spring rate for each vehicle in order to enhance your driving pleasure with the optimum balance of sportiness and suitability for everyday use. After all, you are not buying just any coilover suspension, but a KW coilover suspension that has been specially developed and tuned for your vehicle type. As a manufacturer, KW only uses its own resources, high-quality components and the same damper technology as mass-produced manufacturers. With the KW V1, the rolling and rolling movements of the vehicle body are reduced during compression, allowing you to benefit from unadulterated directness and sportier handling when driving.

Our experience for your driving pleasure
As a manufacturer of customised suspension solutions for road and racing, we have been the market leader and innovation driver for over 25 years. No matter where in the world, sporty drivers, car manufacturers and tuners rely on our KW coilovers "Made in Germany". Every KW coilover suspension is subjected to extensive load tests during production and is developed and manufactured directly at our company headquarters in Fichtenberg, Swabia, in order to fulfil the high standards of our KW quality management. As a German manufacturer, it is a matter of course for us to offer a multi-year warranty on our KW coilover suspension kits, which exceed OEM quality and cover over 4,600 applications. When installed by one of our KW specialist dealers, the warranty is up to five years.

- Optimally adjusted in advance
- sporty and harmonious damping technology
- Stainless steel technology "inox-line"
- Individually height-adjustable
- Tested adjustment range
- Ready-to-install complete solution
- High-quality components for a long service life
- Complete documentation for easy handling

Setup - factory pre-configured damping setup
The KW V1 has a vehicle-specific, permanently configured damper setup. The spring and damper are perfectly matched to each other so that you experience an optimum balance of sportiness and suitability for everyday use when driving.

Even with a full payload and maximum axle loads, the dampers always work with a sporty characteristic curve. It is interesting to note that the KW V1 is particularly popular with tuning enthusiasts who prioritise the idea of show & shine.

Please note the conditions and instructions for this product:
- VA + HA height-adjustable (VA coilover struts, HA springs with height adjustment + damper)

Technical information:
Lowering VA/HA (mm):5-30/0-30
Version: V1
Hardness adjustment: none
Material: Stainless steel
Adjustment VA/HA: thread/thread
Approval: Parts certificate (§19.3)

Compatible vehicles:
Manufacturer Model Version Body Fuel Performance Displacement Cylinder Drive
MERCEDES-BENZ C-KLASSE T-Model (S204) 204 K, 204 K AMG 08/2007-08/2014 C 63 AMG Estate Petrol 373 KW 6208 ccm 8 Rear-wheel drive
MERCEDES-BENZ C-KLASSE T-Model (S204) 204 K, 204 K AMG 08/2007-08/2014 C 63 AMG Estate Petrol 383 KW 6208 ccm 8 Rear-wheel drive
MERCEDES-BENZ C-CLASSE T-Model (S204) 204 K, 204 K AMG 08/2007-08/2014 C 63 AMG (204.277) Estate Petrol 336 KW 6208 ccm 8 Rear-wheel drive
MERCEDES-BENZ C-CLASSE T-Model (S204) 204 K, 204 K AMG 08/2007-08/2014 C 63 AMG (204.277) Estate petrol 358 KW 6208 ccm 8 rear-wheel drive

Please enter a valid email address.
Please enter a valid question.
Fields marked with * are mandatory.

There aren't any asked questions yet.
Zuletzt gesehene Produkte

Zuletzt gesehene Produkte

Wheel spacer system D2 22mm axle LK: 5x120 NLB: 72,6mm | fits BMW / Mini | ST Suspensions
ST wheel spacers System D25, 8, 10, 11, 12, 12.5, 15, 16, 17, 17.5, 18, 20, 21 or 25 mm per wheel Push-through system with bolt circle holes and double centring. The centre hole for centring on the wheel hub and an additional centring collar on the wheel spacer for the rim ensure optimum concentricity. Longer wheel bolts are required to fit the rim. - Scope of delivery: 2 wheel spacers system D2- Made of high-quality aluminium (steel in individual cases)- Black anodised for perfect corrosion protection- Dynamic appearance of the vehicle / perfect look- Improved driving dynamics due to wider track width- Matching wheel bolts (in black and silver) available Technical information:Width per axle: 22mmMounting type: Bolt-through fasteningDesign / material: D2/aluminiumBolt circles: 5x120Hub hole bore: 72,6mmCentre collar: withMounting position: Front axle or rear axleApproval type (vehicle approval): Parts certificate (§19.3)Scope of delivery: Set (2 pcs.) Compatible vehicles:BMW 1 Series (E81) 187, 1K2 09/2006-09/2012BMW 1 Series (E82) Coupe 182, 1C, M-V 10/2006-10/2013BMW 1 Series (E87) 187, 1K4 02/2003-01/2013BMW 1 Series (E88) Convertible 182, 1C 12/2007-12/2013BMW 1 Series (F20) 1K4 07/2011-06/2019BMW 1 Series (F21) 1K2 12/2011-BMW 2 Series (F22, F87) Coupe 1C, M3 10/2012-BMW 2 Series (F23) Convertible 1C 03/2014-BMW 3 Series (E30) 3/1, 3/A, M3 09/1982-03/1992BMW 3 Series (E36) 3C, 3/C, M3/B 09/1990-11/1998BMW 3 Series (E36) Compact 3C, 3/CG, 3/CNG 01/1994-08/2000BMW 3 Series (E36) Coupe 3B, 3/B, M3B, M3/B 10/1991-05/1999BMW 3 Series (E36) Convertible 3B, 3/B, 3/R, M3 B, M3/B 03/1993-11/1999BMW 3 Series (E36) Touring 3/C 08/1994-12/1999BMW 3 Series (E46) 346L, 346X 12/1997-05/2005BMW 3 Series (E46) Convertible 346R, M346 04/2000-12/2007BMW 3 Series (E46) Compact 346K 03/2001-02/2005BMW 3 Series (E46) Coupe 346C, M346, M390 12/1998-07/2006BMW 3 Series (E46) Touring 346L, 346X 06/1999-07/2005BMW 3 Series (E90) 390L, 390X, 3L, M3, M3 GTS, M390 02/2004-02/2012BMW 3 Series (E91) Touring 390L, 390X, 3K 12/2004-12/2012BMW 3 Series (E92) Coupe 390X, 392C, 3C, M-V, M3, M3 GTS, M390 01/2005-12/2013BMW 3 Series (E93) Convertible 392C, 3C, M3, M390 05/2006-12/2013BMW 3 Series (F30, F80) 3-HY, 3L, M3, M3 GTS 03/2011-10/2018BMW 3 Series (F31) Touring 3K 07/2012-06/2019BMW 3 Series (F34) Gran Turismo 3-V 07/2012-BMW 4 Series (F32, F82) Coupe 3C, M3, M3 GTS 07/2013-BMW 4 Series (F33, F83) Convertible 3C, M3 10/2013-BMW 4 Series (F36) Gran Coupe 3C 03/2014-BMW 5 Series (E28) 5, 5/1 05/1981-12/1987BMW 5 Series (E34) 5/H, M5/H, X5/H 02/1987-12/1995BMW 5 Series (E34) Touring 5/H, M5/H, X5/H 07/1991-07/1996BMW 5 Series (E60) 560L, 560X, M5/M6, M560 12/2001-03/2010BMW 5 Series (E61) Touring 560L, 560X, M5/M6, M560 03/2004-12/2010BMW 5 Series (F07) Gran Turismo GT 01/2009-02/2017BMW 5 Series (F10) 5L, GT, HY, KL, M5/M6 01/2009-10/2016BMW 5 Series (F11) Touring 5K, GT 11/2009-02/2017BMW 6 Series (E24) BMW 6 CS, BMW 6 CS/1 10/1975-04/1989BMW 6 Series (E63) 663C, M5/M6, M560 09/2003-12/2010BMW 6 Series (E64) Convertible 663C, M5/M6, M560 03/2004-12/2010BMW 6 Series (F06) Gran Coupe 6C, M5/M6 03/2012-10/2018BMW 6 Series (F12) Convertible 6C, M5/M6 12/2010-06/2018BMW 6 Series (F13) Coupe 6C, M5/M6 07/2011-10/2017BMW 7 Series (E32) 7/1 03/1985-10/1994BMW 7 Series (E38) 7/G, 7/GK 03/1994-11/2001BMW 7 Series (E65, E66, E67) 765, 767, 767P 07/2001-12/2009BMW 7 Series (F01, F02, F03, F04) 701, 7L, HY 02/2008-12/2015BMW 8 Series (E31) 8/E, M8/E 01/1990-12/1999BMW X1 (E84) X1 03/2009-06/2015BMW X3 (E83) X83 01/2003-12/2011BMW X3 (F25) X3 09/2010-08/2017BMW X4 (F26) X3 05/2013-03/2018BMW X5 (E53) X53 01/2000-12/2006BMW X6 (E71, E72) HY, M7X, X-N1, X6, X70 06/2007-07/2014BMW Z3 (E36) Coupe MR/C, R/C 04/1997-06/2003BMW Z3 (E36) Roadster MR/C, R/C 10/1995-01/2003BMW Z4 (E86) Coupe M85, Z85 03/2006-01/2009BMW Z4 (E85) Roadster M85, Z85 09/2002-12/2009MINI COUNTRYMAN (R60) UKL/X 08/2010-10/2016MINI PACEMAN (R61) UKL-C/X 03/2012-10/2016

€99.00*
Door Set Carbon (4 pieces) | fits BMW 3 Series/M3 (G20/G80) | Aulitzky Tuning
Upgrade your G20/G80 with these carbon fibre doors that enhance both style and performance. Details:- Carbon fibre doors, made from high quality prepreg carbon fibre- Guaranteed accuracy of fit, 1:1 from the original- Largely reduced weight, the weight of the carbon fibre doors is less than 1/2 of the original doors.- Price is for 4 doors - front and rear Features:- Lightweight design: made from high quality carbon fibre, these doors are significantly lighter than the stock doors and reduce the overall weight of the vehicle for improved agility and acceleration.- Superior strength: Carbon fibre offers exceptional strength and rigidity, ensuring high durability and resilience while maintaining a slim profile.- Premium finish: The doors feature a high-gloss carbon fibre weave that gives your G20/G80 a refined, race-inspired look and complements its sporty design.- Exact fit: Designed specifically for the G20/G80, these doors offer a precise fit and seamless integration that meets OEM standards for alignment and function.- Improved performance: By reducing weight, these doors contribute to better handling, braking behaviour and improved driving dynamics.- Professional installation recommended: For best results, professional installation is recommended to ensure proper alignment and functionality with your vehicle's systems. Care instructions:Regular cleaning: Maintain carbon fibre parts by cleaning them regularly with a soft cloth and a mixture of mild soap and water. Avoid abrasive cleaners or harsh detergents that could damage the surface.Use microfibre pads and cloths: Use microfibre pads and cloths when cleaning or applying protective coatings to avoid scratching the surface.Protect the product from the sun and chemicals: Avoid direct sunlight and harsh chemicals, as these can damage the carbon fibre. If possible, use protective covers or park your vehicle in shaded areas. Installation:Although the installation of this product is relatively simple for the skilled DIY enthusiast, we still recommend installation by a professional mechanic.No special tools are required to install this product. Scope of delivery:- 4 carbon fibre doors (2x front doors per FS/BFS, 2x rear doors per FS/BFS)- Required mounting parts Compatible vehicles:All G20/G80 modelsNote: This is NOT an original BMW product!

€9,999.00*
KW DDC ECU coilover suspension inox | fits Mercedes-Benz C63 AMG T-Model (S204) | 39025011
KW coilover suspension DDC ECU KW Dynamic Damping Control ECU Individuality at the touch of a button.The KW DDC coilovers are the intelligent suspension solution for retrofitting from the KW iSuspension product range. They combine the advantages of an adaptive damping system with a vehicle-specific sporty and harmonious damper characteristic with a stylish and sporty lowering. The adaptive KW coilovers are available in the KW DDC ECU version with optional app control for vehicles without actively controlled standard suspension and as KW DDC Plug & Play version for selected vehicle models with adaptive standard suspension.The adaptive KW DDC ECU coilovers allow a stepless lowering in the tested adjustment range. Thanks to the dirt-resistant trapezoidal thread and the polyamide threaded ring, the stepless lowering can be varied quickly and easily even after years. Depending on the vehicle, lowering takes place either on the wheel-guiding KW stainless steel suspension struts or, in the case of non-wheel-guiding double-wishbone rear axles, on the rear axle height adjustment. No matter where in the world, sporty drivers, car manufacturers and tuners rely on our KW technology "Made in Germany".Every KW coilover suspension is subjected to extensive load tests during production and is developed and manufactured directly at our company headquarters in Fichtenberg, Swabia, in order to fulfil the high standards of our KW quality management. As a German manufacturer, it is a matter of course for us to provide a multi-year warranty on our KW coilover suspension kits, which exceed OEM quality and cover over 4,600 applications. It is up to five years when installed by one of our KW specialist dealers. The adaptive KW DDC ECU coilovers with app control are currently available for Audi, BMW, Mercedes-Benz, Porsche, VW and many other vehicles such as the Range Rover Evoque. - retrofittable electronic damper adjustment, combined with the advantages of a KW coilover suspension- with optional app control- Three damping setups: Comfort / Sport / Sport +- Operation via retrofit button or optional app- Create your own setups intuitively via KW DDC app KW DDC button - 1x button, 3x learn moreThe scope of delivery of the KW DDC ECU coilover kit also includes a KW DDC button. This allows you to select the KW DDC driving modes "Comfort", "Sport" and "Sport+" directly from the cockpit. The KW DDC button changes the colour to match the KW DDC APP. W-LAN module & app controlOptionally available app control for live suspension tuning via iPhone, iPod Touch, iPad.Experience top-class innovation and quality "Made in Germany": the KW DDC (Dynamic Damping Control) coilover suspension with ECU (Electronic Control Unit). The coilover suspension with its electronically adjustable dampers enables intelligent suspension tuning via app control and is already available for numerous vehicles without adaptive standard suspension.This allows you to upgrade your vehicle with adaptive damper control and optionally adapt it to your driving style via the KW DDC app. You do not need any tools or have to work on the dampers yourself.The free KW DDC App in combination with our optionally available W-Lan module is your tool to carry out an individual damper tuning live and in real time. Please note the conditions and instructions for this product:- VA + HA height-adjustable (VA coilover struts, HA springs with height adjustment + damper) Technical information:Lowering VA/HA (mm):5-30/0-30Version: DDC - ECUHardness adjustment: Rebound and compression stageMaterial: Stainless steelAdjustment VA/HA: thread/threadApproval: Parts certificate (§19.3) Compatible vehicles:Manufacturer Model Version Body Fuel Performance Displacement Cylinder DriveMERCEDES-BENZ C-KLASSE T-Model (S204) 204 K, 204 K AMG 08/2007-08/2014 C 63 AMG Estate Petrol 373 KW 6208 ccm 8 Rear-wheel driveMERCEDES-BENZ C-KLASSE T-Model (S204) 204 K, 204 K AMG 08/2007-08/2014 C 63 AMG Estate Petrol 383 KW 6208 ccm 8 Rear-wheel driveMERCEDES-BENZ C-CLASSE T-Model (S204) 204 K, 204 K AMG 08/2007-08/2014 C 63 AMG (204.277) Estate Petrol 336 KW 6208 ccm 8 Rear-wheel driveMERCEDES-BENZ C-CLASSE T-Model (S204) 204 K, 204 K AMG 08/2007-08/2014 C 63 AMG (204.277) Estate petrol 358 KW 6208 ccm 8 rear-wheel drive

€4,015.06*
Competition Intercooler Kit EVO 3 | fits BMW 1M/135i/335i N54 N55 | Wagner Tuning
The Wagner Tuning intercooler kit EVO III Competition fits the following vehicles with N54 & N55 engines:BMW 335 (x)i E90/E91/E92/93 2006-2011 (without ACC)BMW 335is E92 2009-2013 (without ACC)BMW 135i E82/E88 2007-2013 (without ACC / not in combination with M-Performance front bumper)BMW 1 SeriesM E82 2011-2013 (without ACC) Prepare to push the performance limits of your vehicle with our EVO 3 high performance intercooler kit. Designed to meet the demanding requirements of high performance tuning levels, this kit will provide you with an impressive level of performance enhancement and cooling. Measuring 510mm x 303mm x 180mm (stepped 20.65L), our high performance intercooler offers an impressive 162% larger flow area and a whopping 182% more charge air volume compared to the stock intercooler. This means a significant improvement in the cooling capacity and performance of your vehicle. At the heart of this intercooler is our high quality Tube Fin mesh with internal turbulators. This mesh ensures efficient heat transfer and optimizes airflow for maximum cooling. Despite its impressive size, the intercooler only weighs a light 13.2kg. The end boxes of the intercooler are made of cast aluminium and have been optimized with the help of flow analyses in the CFD system. This guarantees outstanding cooling performance with minimal back pressure. The inlets and outlets of the intercooler have been enlarged to Ø70mm to ensure maximum air flow. Our EVO 3 kit includes everything you need for installation, including reinforced silicone hoses. Replacement with the standard intercooler is simple and straightforward (plug-and-play). The anti-corrosion coating with heat conduction properties ensures long-lasting and optimum cooling. This kit was developed for the highest performance requirements and is tested and pressure-stable up to 6 bar. We place great emphasis on quality and constantly monitor our products to ensure they meet the highest standards. Prepare to dominate the road and take your vehicle to a new level of performance. With our EVO 3 high-performance intercooler kit, you are guaranteed breathtaking driving experiences. Advantages of the Wagner Tuning intercooler:- improved cooling performance- 162% larger inflow area- 182% more charge air volume- Inlets and outlets of the intercooler have been extended to Ø70mm- Plug & Play Scope of delivery:1 intercooler2 silicone hoses1 aluminum adapter1 mounting material1 assembly instructionAttention: Not approved in the area of the StVZO.

€1,250.00*
Aulitzky Exhaust | ECE rear silencer with flap control | fits BMW X5M/X6M (F85/F86) 575hp
Facts: - Tailpipes: 4x90mm black - electric flaps - Made in Germany (Lake Constance) - with/without ECE approval (depending on choice of flap control)* Scope of delivery: - 1x Aulitzky Exhaust rear silencer - 4x tailpipes 90mm black - ECE handout Compatible vehicles: VehicleVehicle typePowerEngine capacityEngineYear of constructionBMW X5 (F85)M423kW / 575hp4395cm³S63 B44 B12.14 - 07.18BMW X6 (F86)M423kW / 575hp4395cm³S63 B44 B12.14 - 07.19 *ATTENTION! In conjunction with the standard or ECE flap control system (with type approval), this flap rear silencer has ECE approval so that it can be used legally within the scope of the StVZO without registration in the vehicle documents.The use of flap rear silencers in conjunction with the race flap control (without approval) is not permitted for use on public roads and is only intended for racing purposes! If you nevertheless install a product without approval in your vehicle and use it within the scope of the StVZO, you are liable to prosecution. Possible consequences that you can expect in this case: Expiry of the operating licence in accordance with §19 of the StVZO and possible resulting immobilisation of the vehicle. Other possible consequences, such as a charge of tax evasion, as well as possible investigations by the environmental authorities are at the discretion of the investigators.

€2,599.00*
Competition Intercooler Kit EVO 3 | fits BMW 335d (E90/E91/E92) 286hp M57 | Wagner Tuning
The Competition intercooler kit EVO III is suitable for the following vehicles:BMW 335d E90/91/92/93 (2005-2013)* (without ACC)*Adaptations to the vehicle are necessary (see installation instructions). Only suitable for vehicles without ACC unit. Unleash the full potential of your vehicle with the EVO3 high performance intercooler. This radiator exceeds all expectations with net dimensions of 510mm x 303mm x 180mm (stepped to 20.65L). Compared to the standard intercooler, it offers an impressive 133% larger flow area and a whopping 183% more charge air volume. Our Competition high performance mesh is a masterpiece of engineering, a Tube Fin mesh with internal turbulators that takes air cooling to a new level. Despite its size, this cooler surprises with a total weight of only 13.2 kg. The EVO 3 intercooler kit was developed specifically for the extreme requirements of the largest tuning stages. Original click connections are a thing of the past, instead we offer generous connection diameters of Ø70 mm, supported by reinforced silicone hoses. The result? Excellent cooling with minimal back pressure. All our intercoolers have an anti-corrosion coating that not only prevents corrosion but also offers excellent heat conduction properties. This guarantees a long-lasting and optimum cooling performance with a noticeable increase in power. This kit is completely ready to install and can be easily replaced with your standard intercooler. However, due to its size, some minor adjustments to the radiator support are required. This intercooler has been tested to up to 6 bar and is absolutely pressure stable. You can rely on the quality of our products. Whether on the race track or on the road, the EVO 3 high-performance intercooler is designed for racing and offers the performance and cooling you need. Advantages of the Wagner Tuning intercooler:- improved cooling performance- 133% larger inflow area- 183% more charge air volume- connection diameter of Ø70 mm- minimal back pressure- Plug and Play Mains OEM intercooler:V = 7.29 LA = 663 cm² Mains Wagner Tuning intercooler:V = 20.65 LA = 1545 cm² Scope of delivery:1 intercooler (black coated)3 silicone hoses1 aluminium adapter (black anodized)1 aluminium charge air pipe (black anodized)1 mounting material1 assembly instructionsAttention: Not approved in the area of the StVZO.

€1,300.00*