Gift voucher 500€

KW V1 coilover suspension Sportiness paired with outstanding looks. With factory pre-configured damping.Our entry-level model for more driving pleasure through an appealing and individually adjustable lowering is the KW V1 coilover suspension in the KW typical "inox-line". Thanks to its high-quality workmanship, the consistent use of stainless steel struts, corrosion-resistant springs and harmonised components, it stands for many years of driving pleasure - and not just for the life of the car. Stepless loweringThe KW V1 enables maximum lowering within the tested adjustment range. This varies depending on the vehicle model and can, for example, be between 30 and 70 millimetres or 50 to 90 millimetres for an individual lowering. Thanks to the dirt-resistant trapezoidal thread and the polyamide threaded ring, the stepless lowering can be varied quickly and easily even years later. Depending on the vehicle, lowering is carried out either on the wheel-guiding KW stainless steel suspension struts or, in the case of non-wheel-guiding double-wishbone rear axles, on the rear axle height adjustment. The benchmark for sporty, dynamic tuning fansWith its harmonious basic set-up for sporty driving on the road, the KW V1 convinces the discerning tuning fan. Our development engineers determine a specific damper set-up and spring rate for each vehicle in order to enhance your driving pleasure with the optimum balance of sportiness and suitability for everyday use. After all, you are not buying just any coilover suspension, but a KW coilover suspension that has been specially developed and tuned for your vehicle type. As a manufacturer, KW only uses its own resources, high-quality components and the same damper technology as mass-produced manufacturers. With the KW V1, the rolling and rolling movements of the vehicle body are reduced during compression, allowing you to benefit from unadulterated directness and sportier handling when driving. Our experience for your driving pleasureAs a manufacturer of customised suspension solutions for road and racing, we have been the market leader and innovation driver for over 25 years. No matter where in the world, sporty drivers, car manufacturers and tuners rely on our KW coilovers "Made in Germany". Every KW coilover suspension is subjected to extensive load tests during production and is developed and manufactured directly at our company headquarters in Fichtenberg, Swabia, in order to fulfil the high standards of our KW quality management. As a German manufacturer, it is a matter of course for us to provide a multi-year warranty on our KW coilover suspension kits, which exceed OEM quality and cover over 4,600 applications. When installed by one of our KW specialist dealers, the warranty is up to five years. - Optimally adjusted in advance- sporty and harmonious damping technology- Stainless steel technology "inox-line"- Individually height-adjustable- Tested adjustment range- Ready-to-install complete solution- High-quality components for a long service life- Complete documentation for easy handling Setup - factory pre-configured damping setupThe KW V1 has a vehicle-specific, permanently configured damper setup. The spring and damper are perfectly matched to each other so that you experience an optimum balance of sportiness and suitability for everyday use when driving. Even with a full payload and maximum axle loads, the dampers always work with a sporty characteristic curve. It is interesting to note that the KW V1 is particularly popular with tuning enthusiasts who prioritise the idea of show & shine. Please note the conditions and instructions for this product: - VA + HA height adjustable (coilover struts) - When used with standard wheel/tire combinations, additional commercially available track wideners from the accessories may be required - Dampers have easy-to-use adjustment wheels. Due to the design, the rebound stage can only be adjusted when the piston rod is accessible. - For camber correction on the rear axle, we recommend the use of the adjustable KW control arm. Vehicle-specific KW control arms can be found in the accessories table. Technical information: Product line: Street Performance Lowering VA/HA (mm): 30-55/30-55 Design: V1 Hardness adjustment: none Material: Stainless steel Adjustment VA/HA: Thread/thread Approval: Parts certificate (§19.3) Compatible vehicles: Manufacturer Model Version Body Fuel Performance Displacement Cylinder Drive MINI MINI (R56) MINI-N, UKL-L 11/2005-01/2014 Cooper Hatchback Petrol 85 KW 1598 ccm 4 Front Wheel Drive MINI MINI (R56) MINI-N, UKL-L 11/2005-01/2014 Cooper Hatchback Petrol 88 KW 1598 ccm 4 Front Wheel Drive MINI MINI (R56) MINI-N, UKL-L 11/2005-01/2014 Cooper Hatchback Petrol 90 KW 1598 ccm 4 Front Wheel Drive MINI MINI (R56) MINI-N, UKL-L 11/2005-01/2014 One Hatchback Petrol 55 KW 1397 ccm 4 front-wheel drive MINI MINI (R56) MINI-N, UKL-L 11/2005-01/2014 One Hatchback Petrol 55 KW 1598 ccm 4 front-wheel drive MINI MINI (R56) MINI-N, UKL-L 11/2005-01/2014 One Hatchback Petrol 70 KW 1397 ccm 4 front-wheel drive MINI MINI (R56) MINI-N, UKL-L 11/2005-01/2014 One Hatchback Petrol 72 KW 1598 ccm 4 front-wheel drive

The additive for all petrolheads who have diesel in their blood: The KLBNGEFLÜSTER® Cetane Booster additive has been specially developed for motorsport - for the ultimate power on your racetracks. KLBNGEFLÜSTER® Cetane Booster raises the cetane number of your diesel fuel and ensures that your engine develops its full performance potential. The optimisation of combustion and fuel efficiency significantly improves torque and acceleration while at the same time comprehensively cleaning the fuel system - guaranteed to put a grin on your face! KLBNGEFLÜSTER® Cetan Booster has been proven to be compatible with all diesel qualities and may only be used in motorsport and not on public roads. It may only be used after approval by the car manufacturer. KLBNGEFLÜSTER® Cetan Booster activates 1,000 litres of diesel in a 100 ml container, thus ensuring a lot of driving pleasure! Contents: - 100ml (0.1 litre) (sufficient for 1,000 litres of diesel fuel!)

Competition intercooler kit fits for:Ford Ranger PX2 3,2TDCi (147kW/200hp) 2015-2019[for pre-facelift models slight modifications to the intercooler grille are necessary] Boost the power and performance of your Ford Ranger diesel engine with the Wagner Tuning high performance intercooler. This impressive kit has been specially developed to meet the requirements of the Ford Ranger and will make your off-road adventures even more exciting. The high performance intercooler features a new competition core (Tube Fin) with the dimensions 660 mm x 282 [254] mm x 120 [65] mm [stepped]. This core offers a 32% larger front surface area and a 279% larger core volume compared to the standard intercooler. Feel the difference and experience improved performance with your Ford Ranger. The cast aluminum tanks were precisely designed in CAD and optimized in CFD simulations to ensure ideal internal airflow. An integrated air duct in the intercooler inlet ensures even filling and maximum cooling performance. The result is an outstanding cooling effect with minimal back pressure. The newly developed competition high-performance core is also particularly lightweight and ensures sufficient airflow to the adjacent components such as the water cooler. Enjoy optimum cooling of the supercharged air and experience a significant increase in performance. The Wagner Tuning high-performance intercooler is equipped with a high-quality anti-corrosion coating that offers excellent thermal conductivity and protects the intercooler from environmental influences. This ensures long-lasting and optimum cooling performance. Installation is carried out by replacing the standard intercooler and is easy to perform (plug and play). You can rely on our products, which are subject to continuous quality monitoring. Increase the performance of your Ford Ranger and be inspired by the impressive performance and cooling capacity of the Wagner Tuning high-performance intercooler. Advantages of the Wagner Tuning intercooler:- improved cooling performance- 32% larger inflow area- 279% more net volume- Inlet diameter Ø60 mm (OEM click connection); outlet diameter Ø60 mm (OEM click connection)- Plug and Play Mesh OEM intercooler:670 mm x 210 mm x 40 mmV = 5.62 LA = 1407 cm² Mesh Wagner Tuning intercooler:660 mm x 282 [254] mm x 120 [65] mm [stepped]V = 21.3LA = 1861 cm² Scope of delivery:1 intercooler2 silicone hoses1 mounting material1 installation instructionAttention: Not approved in the area of the StVZO.

The Eventuri FK8 and FK2 engine cover is made of black carbon and red Kevlar and fits directly on the FK8 and also on the FK2 Type-R. Expert opinion: Material certificate Compatible vehicles:VehicleVehicle typePowerEngine capacityEngine typeYear of construction Honda Civic (FK2)Type-R228kW / 310hp1996cm³K20C108.15 - 12.16 Honda Civic (FK8)Type-R235kW / 320hp1996cm³K20C106.17 - 12.22

KW V2 Comfort coilover suspension The KW V2 Comfort coilover suspension focuses on your comfort-oriented driving pleasure.If your standard sports suspension is too harsh for you as a frequent driver or as a family, or if even the suspension comfort of your installed accessory lowering springs is too unharmonious in the long run, the KW V2 Comfort sports suspension is the ideal solution for more driving comfort. It combines a subtle lowering in the vehicle-specific adjustment range of ten to 40 millimeters with a comfort-oriented damper tuning developed by KW test engineers on numerous test drives in everyday life and on the KW 7-Post driving dynamics test bench. Suspension too hard? KW V2 Comfort is the answerWhether on long stretches on the highway or many kilometers on fast country roads, with the KW V2 Comfort coilover suspension you enjoy a comfortable setup. The shorter KW damper housings allow a comfortable residual spring travel despite the lowering. With the KW V2 Comfort coilover suspension, the dampers, housings, springs and the comfort-oriented damper characteristics are perfectly matched to each other. In addition, the KW V2 Comfort coilover suspension allows you to further adjust the rebound damping individually to your driving style and your comfort level. Adjustable comfort - "no more hard times" With the KW V2 Comfort coilover suspension, you can also influence the handling and comfort yourself with the individually adjustable rebound adjustment. With the 16 exact clicks, you can adjust the KW dampers to be more comfortable or firmer, without affecting the bottom valve of the compression stage. By increasing the rebound force via the adjustment wheel, the body movements on the body are reduced. As a result, your car tracks better and you have even more stability at higher cornering speeds. If, for example, you change from the approved wheel/tyre combinations of your car manufacturer to larger rims, you can use the adjustable rebound to perfectly match the handling of your car and your new alloy wheels. Or you can reduce the rebound to even more comfort with just a few clicks - just as you have always wanted from a sports suspension. Stepless lowering from ten to 40 millimetres The KW V2 Comfort coilover suspension, manufactured using "inox-line" stainless steel technology, allows vehicle-specific lowering in a tested adjustment range of ten to 40 millimetres. As a result, you no longer have to be satisfied with a fixed lowering as with a conventional spring kit. Thanks to the filigree workmanship and the use of high-quality components, the KW V2 Comfort coilover struts made of stainless steel are 100 percent corrosion-resistant and have an unlimited service life. The functionality of the stepless lowering in conjunction with the dirt-resistant trapezoidal thread and the polyamide threaded ring is not impaired even after years of use. The individual lowering system with its infinitely variable adjustment range also allows you to visually emphasize the sportiness of your vehicle. -Stainless steel technology "inox-line" -decent lowering -Tested adjustment range -high-quality components for a long service life Comfort-oriented damper tuning -adjustable rebound damping Setup - Adjustable rebound damping with 16 clicks.The KW V2 Comfort coilover suspension focuses on your comfort-oriented driving pleasure. That's why our test engineers were on the road for you on numerous highways, country roads and bad roads. The KW V2 Comfort coilover suspension is suitable for all frequent drivers and families who want to combine the pleasure of a subtle lowering with driving comfort. Please note the conditions and instructions for this product: - VA + HA height-adjustable (coilover struts) - When used with standard wheel/tire combinations, additional standard toe spacers from the accessories may be required - For camber correction on the rear axle, we recommend using the adjustable KW control arm. Vehicle-specific KW control arms can be found in the accessories table. Technical information: Product line: Street Comfort Lowering VA/HA (mm): 30-55/25-50 Version: V2 Comfort Hardness adjustment: Rebound Material: Stainless steel Adjustment VA/HA: Thread/thread Approval: Parts certificate (§19.3) Compatible vehicles: Manufacturer Model Version Body Fuel Performance Displacement Cylinder Drive MINI MINI (R56) MINI-N, UKL-L 11/2005-01/2014 Cooper Hatchback Petrol 85 KW 1598 ccm 4 Front Wheel Drive MINI MINI (R56) MINI-N, UKL-L 11/2005-01/2014 Cooper Hatchback Petrol 88 KW 1598 ccm 4 Front Wheel Drive MINI MINI (R56) MINI-N, UKL-L 11/2005-01/2014 Cooper Hatchback Petrol 90 KW 1598 ccm 4 Front Wheel Drive MINI MINI (R56) MINI-N, UKL-L 11/2005-01/2014 One Hatchback Petrol 55 KW 1397 ccm 4 front-wheel drive MINI MINI (R56) MINI-N, UKL-L 11/2005-01/2014 One Hatchback Petrol 55 KW 1598 ccm 4 front-wheel drive MINI MINI (R56) MINI-N, UKL-L 11/2005-01/2014 One Hatchback Petrol 70 KW 1397 ccm 4 front-wheel drive MINI MINI (R56) MINI-N, UKL-L 11/2005-01/2014 One Hatchback Petrol 72 KW 1598 ccm 4 front-wheel drive