Intake system Carbon | fits VAG 1.8/2.0 T(F)SI EA888 Gen.3 incl. S3, TTS, Cupra, RS, GTI, Formentor | APR

€749.00*

Delivery time: approx. 10-14 working days. Exact delivery time on request*.

place a request

Finanzieren Sie ihren Einkauf über die Targobank.

Product number: CI100033

Product information "Intake system Carbon | fits VAG 1.8/2.0 T(F)SI EA888 Gen.3 incl. S3, TTS, Cupra, RS, GTI, Formentor | APR"

The closed APR carbon intake system increases performance by optimising the air mass flow and at the same time offers perfect filtration.

Facts:
- Higher power and more torque
- Better throttle response
- Improved engine noise
- Closed carbon fibre system
- All fastening elements included
- Pleated filter made from cotton gauze
- Directional rotating vanes for correct loading of the filter

The carbon fibre intake system is an attractive high performance upgrade for the 1.8T and 2.0T engines found in various vehicles on the MQB platform. The factory intake design has the foundation for excellent performance, but much of it is sacrificed in an effort to fulfil other design requirements.

With requirements to support only factory power output, low noise levels and long service intervals, there is plenty of room for improvement. Expect more power and torque across the powerband with a more direct and responsive feel when operating the throttle. Engine and turbocharger noise will be improved and, depending on driving style, fuel consumption may even be reduced.

In the endeavour to achieve an ideal pressure ratio (1:1) between inlet and outlet, the intake area has several important features.

Through CFD optimisation and validation on the test bench, the filter housing of the intake section has been shaped into a spiral that uses the inertia of the air entering the system to increase the pressure on the outside of the filter. In this way, an even pressure distribution is achieved over the entire surface of the filter and not just at a few key points, maximising the utilisation of the filter area. Compared to many other common intake styles, the APR intake system allows the use of a small, compact filter with better filter utilisation than systems that are often twice the size.

Unlike conventional open element filters, the APR intake system only draws air from the grille area near the front edge of the bonnet. In this way, air is drawn in from an area of relatively high pressure. As the speed of the vehicle increases, the pressure builds up further and ultimately supports the effectiveness of the intake system. By sealing the intake system, the pressure created by the ram air effect and the spiral shape is not simply lost in the engine compartment. This is in contrast to filters with open elements, which draw in air from a relatively low pressure range in the engine compartment.

The design specifications called for an intake system that would only reproduce the true turbocharger sound of the engine when the air is drawn in through the turbocharger or expelled from the diverter valve when the throttle valve is lifted.

The stiffness of the carbon fibre composite material results in engine intake resonance, allowing occupants to hear a clean and clear intake note without sounding intrusive or cheap.

Compatible vehicles:
Audi A3 (8V1, 8VK) 1.8 TFSI CJSA - 180 hp
Audi A3 (8V1, 8VK) 1.8 TFSI quattro CJSB - 180 hp
Audi A3 (8V1, 8VK) 2.0 TFSI CZPB - 190 hp
Audi A3 (8V1, 8VK) 2.0 TFSI quattro CZPB - 190 hp
Audi A3 (8V1, 8VK) S3 quattro CJXB - 280 hp
Audi A3 (8V1, 8VK) S3 quattro CJXC - 300 hp
Audi A3 (8V1, 8VK) S3 quattro CJXF - 286 hp
Audi A3 (8V1, 8VK) S3 quattro CJXG - 310 hp
Audi A3 (8V1, 8VK) S3 quattro DJHA - 310 hp
Audi A3 Cabriolet (8V7, 8VE) 1.8 TFSI CJSA - 180 hp
Audi A3 Cabriolet (8V7, 8VE) 1.8 TFSI CJSB - 180 hp
Audi A3 Cabriolet (8V7, 8VE) 1.8 TFSI quattro CJSB - 180 hp
Audi A3 Cabriolet (8V7, 8VE) 2.0 TFSI CZPB - 190 hp
Audi A3 Cabriolet (8V7, 8VE) 2.0 TFSI quattro CZPB - 190 hp
Audi A3 Cabriolet (8V7, 8VE) S3 quattro CJXC - 300 hp
Audi A3 Cabriolet (8V7, 8VE) S3 quattro CJXF - 286 hp
Audi A3 Cabriolet (8V7, 8VE) S3 quattro DJHA - 310 hp
Audi A3 Cabriolet (8V7, 8VE) S3 quattro DNUE - 300 hp
Audi A3 Saloon (8VS, 8VM) 1.8 TFSI CJSA - 180 hp
Audi A3 Saloon (8VS, 8VM) 1.8 TFSI CJSB - 180 hp
Audi A3 Saloon (8VS, 8VM) 1.8 TFSI quattro CJSB - 180 hp
Audi A3 Saloon (8VS, 8VM) 2.0 TFSI CZPB - 190 hp
Audi A3 Saloon (8VS, 8VM) S3 quattro CJXB - 280 hp
Audi A3 Saloon (8VS, 8VM) S3 quattro CJXC - 300 hp
Audi A3 Saloon (8VS, 8VM) S3 quattro CJXF - 286 hp
Audi A3 Saloon (8VS, 8VM) S3 quattro CJXG - 310 hp
Audi A3 Saloon (8VS, 8VM) S3 quattro DJHA - 310 hp
Audi A3 Saloon (8VS, 8VM) S3 quattro DNUE - 300 hp
Audi A3 Sportback (8VA, 8VF) 1.8 TFSI CJSA - 180 hp
Audi A3 Sportback (8VA, 8VF) 1.8 TFSI CJSB - 180 hp
Audi A3 Sportback (8VA, 8VF) 1.8 TFSI quattro CJSB - 180 hp
Audi A3 Sportback (8VA, 8VF) 2.0 TFSI CZPB - 190 hp
Audi A3 Sportback (8VA, 8VF) 2.0 TFSI quattro CZPB - 190 hp
Audi A3 Sportback (8VA, 8VF) S3 quattro CJXB - 280 hp
Audi A3 Sportback (8VA, 8VF) S3 quattro CJXC - 300 hp
Audi A3 Sportback (8VA, 8VF) S3 quattro CJXF - 286 hp
Audi A3 Sportback (8VA, 8VF) S3 quattro CJXG - 310 hp
Audi A3 Sportback (8VA, 8VF) S3 quattro DJHA - 310 hp
Audi A3 Sportback (8VA, 8VF) S3 quattro DNUE - 300 hp
Audi Q2 (GAB, GAG) 2.0 TFSI quattro CZPB - 190 hp
Audi Q2 (GAB, GAG) SQ2 TFSI quattro DNUE - 300 hp
Audi Q3 (F3B) 40 TFSI quattro DKTC - 190 hp
Audi Q3 (F3B) 45 TFSI quattro DKTA - 230 hp
Audi Q3 Sportback (F3N) 40 TFSI quattro DKTC - 190 hp
Audi Q3 Sportback (F3N) 45 TFSI quattro DKTA - 230 hp
Audi TT (FV3, FVP) 1.8 TFSI CJSA - 180 hp
Audi TT (FV3, FVP) 1.8 TFSI CJSB - 180 hp
Audi TT (FV3, FVP) 2.0 TFSI CHHC - 230 hp
Audi TT (FV3, FVP) 2.0 TFSI quattro CHHC - 230 hp
Audi TT (FV3, FVP) 2.0 TTS quattro CJXF - 286 hp
Audi TT (FV3, FVP) 2.0 TTS quattro CJXG - 310 hp
Audi TT (FV3, FVP) 2.0 TTS quattro DNUF - 306 hp
Audi TT (FV3, FVP) 45 TFSI DKTB - 245 hp
Audi TT (FV3, FVP) 45 TFSI quattro DKTB - 245 hp
Audi TT Roadster (FV9, FVR) 1.8 TFSI CJSA - 180 hp
Audi TT Roadster (FV9, FVR) 1.8 TFSI CJSB - 180 hp
Audi TT Roadster (FV9, FVR) 2.0 TFSI CHHC - 230 hp
Audi TT Roadster (FV9, FVR) 2.0 TFSI quattro CHHC - 230 hp
Audi TT Roadster (FV9, FVR) 2.0 TTS quattro CJXF - 286 hp
Audi TT Roadster (FV9, FVR) 2.0 TTS quattro CJXG - 310 hp
Audi TT Roadster (FV9, FVR) 2.0 TTS quattro DNUF - 306 hp
Audi TT Roadster (FV9, FVR) 45 TFSI DKTB - 245 hp
Audi TT Roadster (FV9, FVR) 45 TFSI quattro DKTB - 245 hp
Cupra Ateca (KH7, KHP) 2.0 TSI 4Drive DNUE - 300 hp
Cupra Formentor (KM7) 2.0 TSI 4Drive CZPB - 190 hp
Seat Ateca (KH7, KHP) 2.0 TSI 4Drive CZPB - 190 hp
Seat Leon (5F1) 1.8 TSI CJSA - 180 PS
Seat Leon (5F1) 2.0 Cupra CJXA - 280 hp
Seat Leon (5F1) 2.0 Cupra CJXC - 300 hp
Seat Leon (5F1) 2.0 Cupra CJXE - 265 hp
Seat Leon (5F1) 2.0 Cupra CJXH - 290 hp
Seat Leon (5F1) 2.0 Cupra DNUC - 290 hp
Seat Leon (5F1) 2.0 Cupra R CJXG - 310 hp
Seat Leon SC (5F5) 1.8 TSI CJSA - 180 hp
Seat Leon SC (5F5) 2.0 Cupra CJXA - 280 hp
Seat Leon SC (5F5) 2.0 Cupra CJXC - 300 hp
Seat Leon SC (5F5) 2.0 Cupra CJXE - 265 hp
Seat Leon SC (5F5) 2.0 Cupra CJXH - 290 hp
Seat Leon ST (5F8) 1.8 TSI CJSA - 180 hp
Seat Leon ST (5F8) 2.0 Cupra CJXA - 280 hp
Seat Leon ST (5F8) 2.0 Cupra CJXC - 300 hp
Seat Leon ST (5F8) 2.0 Cupra CJXE - 265 hp
Seat Leon ST (5F8) 2.0 Cupra CJXH - 290 hp
Seat Leon ST (5F8) 2.0 Cupra DNUC - 290 hp
Seat Leon ST (5F8) 2.0 Cupra 4Drive CJXC - 300 hp
Seat Leon ST (5F8) 2.0 Cupra 4Drive DNUE - 300 hp
Skoda Octavia III (5E3, NL3, NR3) 1.8 TSI CJSA - 180 hp
Skoda Octavia III (5E3, NL3, NR3) 2.0 TSI RS CHHA - 230 hp
Skoda Octavia III (5E3, NL3, NR3) 2.0 TSI RS CHHB - 220 hp
Skoda Octavia III (5E3, NL3, NR3) 2.0 TSI RS DLBA - 245 hp
Skoda Octavia III Combi (5E5, 5E6) 1.8 TSI CJSA - 180 hp
Skoda Octavia III Combi (5E5, 5E6) 1.8 TSI CJSB - 180 hp
Skoda Octavia III Combi (5E5, 5E6) 2.0 TSI RS CHHA - 230 hp
Skoda Octavia III Combi (5E5, 5E6) 2.0 TSI RS CHHB - 220 hp
Skoda Octavia III Combi (5E5, 5E6) 2.0 TSI RS DLBA - 245 hp
Skoda Superb III (3V3) 2.0 TSI CHHB - 220 hp
Skoda Superb III (3V3) 2.0 TSI 4x4 CJXA - 280 hp
Skoda Superb III Estate (3V5) 2.0 TSI CHHB - 220 hp
Skoda Superb III Estate (3V5) 2.0 TSI 4x4 CJXA - 280 hp
VW Arteon (3H7, 3H8) 2.0 TSI CZPB - 190 hp
VW Arteon (3H7, 3H8) 2.0 TSI 4motion DJHC - 280 hp
VW Arteon (3H7, 3H8) 2.0 TSI 4motion DNUA - 272 hp
VW Arteon SHOOTING BRAKE (3H9) 2.0 TSi CZPB - 190 hp
VW Arteon SHOOTING BRAKE (3H9) 2.0 TSi 4motion DNUA - 272 hp
VW Golf VII (5G1, BQ1, BE1, BE2) 2.0 GTI CHHA - 230 hp
VW Golf VII (5G1, BQ1, BE1, BE2) 2.0 GTI CHHB - 220 PS
VW Golf VII (5G1, BQ1, BE1, BE2) 2.0 GTI CXDA - 220 hp
VW Golf VII (5G1, BQ1, BE1, BE2) 2.0 GTI DKTB - 245 hp
VW Golf VII (5G1, BQ1, BE1, BE2) 2.0 GTI DLBA - 245 PS
VW Golf VII (5G1, BQ1, BE1, BE2) 2.0 GTI Clubsport CJXE - 265 PS
VW Golf VII (5G1, BQ1, BE1, BE2) 2.0 GTI Clubsport S CJXG - 310 PS
VW Golf VII (5G1, BQ1, BE1, BE2) 2.0 GTI TCR DNUC - 290 PS
VW Golf VII (5G1, BQ1, BE1, BE2) 2.0 R 4motion CJXC - 300 hp
VW Golf VII (5G1, BQ1, BE1, BE2) 2.0 R 4motion CJXG - 310 hp
VW Golf VII (5G1, BQ1, BE1, BE2) 2.0 R 4motion DJHA - 310 hp
VW Golf VII (5G1, BQ1, BE1, BE2) 2.0 R 4motion DNUE - 300 hp
VW Golf VII Estate (BA5, BV5) 1.8 TSI 4motion CJSB - 179 hp
VW Golf VII Variant (BA5, BV5) 2.0 R 4motion CJXC - 300 hp
VW Golf VII Variant (BA5, BV5) 2.0 R 4motion CJXG - 310 hp
VW Golf VII Estate (BA5, BV5) 2.0 R 4motion DJHA - 310 hp
VW Golf VII Variant (BA5, BV5) 2.0 R 4motion DNUE - 300 hp
VW Passat ALLTRACK B8 Variant (3G5, CB5) 2.0 TSI 4motion CHHB - 220 hp
VW Passat ALLTRACK B8 Variant (3G5, CB5) 2.0 TSI 4motion CJXA - 280 hp
VW Passat B8 (3G2, CB2) 1.8 TSI CJSA - 180 hp
VW Passat B8 (3G2, CB2) 1.8 TSI CJSC - 180 hp
VW Passat B8 (3G2, CB2) 2.0 TSI CHHB - 220 hp
VW Passat B8 (3G2, CB2) 2.0 TSI CXDA - 220 hp
VW Passat B8 (3G2, CB2) 2.0 TSI CZPB - 190 hp
VW Passat B8 (3G2, CB2) 2.0 TSI 4motion CJXA - 280 hp
VW Passat B8 (3G2, CB2) 2.0 TSI 4motion DNUA - 272 hp
VW Passat B8 Estate (3G5, CB5) 1.8 TSI CJSA - 180 hp
VW Passat B8 Estate (3G5, CB5) 1.8 TSI CJSC - 180 hp
VW Passat B8 Estate (3G5, CB5) 2.0 TSI CHHB - 220 hp
VW Passat B8 Estate (3G5, CB5) 2.0 TSI CXDA - 220 hp
VW Passat B8 Estate (3G5, CB5) 2.0 TSI CZPB - 190 hp
VW Passat B8 Estate (3G5, CB5) 2.0 TSI 4motion CJXA - 280 hp
VW Passat B8 Estate (3G5, CB5) 2.0 TSI 4motion DNUA - 272 hp
VW Tiguan (AD1, AX1) 2.0 TSI 4motion CHHB - 220 hp
VW Tiguan (AD1, AX1) 2.0 TSI 4motion CZPA - 180 hp
VW Tiguan (AD1, AX1) 2.0 TSI 4motion DKTA - 230 hp
VW Tiguan ALLSPACE (BW2, BJ2) 2.0 TSI 4motion CXDA - 220 hp
VW Tiguan ALLSPACE (BW2, BJ2) 2.0 TSI 4motion DGVA - 180 hp
VW Tiguan ALLSPACE (BW2, BJ2) 2.0 TSI 4motion DNJA - 220 hp
VW Touran (5T1) 1.8 TSI CJSA - 180 hp
VW T-Roc (A11, D11) 2.0 R 4motion DNUE - 300 hp
VW T-Roc (A11, D11) 2.0 TSI 4motion CZPB - 190 hp

Please enter a valid email address.

Your question *

Please enter a valid question.

I agree that my data will be processed to answer the question. I have taken note of the Privacy Policy and agree to the information described therein.*

To continue, enter the characters shown above*

Fields marked with * are mandatory.

There aren't any asked questions yet.

Zuletzt gesehene Produkte

Front spoiler SOOQOO EVO Carbon | fits BMW M2 (G87) S58 | Aulitzky Tuning

The high-quality SOOQOO EVO carbon fibre front spoiler is an excellent addition to significantly enhance the style of your vehicle. Unlike regular carbon fibre, pre-preg carbon is reinforced to increase strength and durability. It can also be a staggering 70% lighter than other carbon fibre options.Prepreg carbon is far more uniform than other types of carbon, meaning the likelihood of imperfections is drastically reduced. The manufacturing process eliminates unwanted air bubbles and results in a perfectly smooth and high-gloss finish. Details:- 100% pure prepreg carbon fibre construction- OEM-style weave- High gloss finish- Fit guarantee- with parts certificate according to §19.3 Scope of delivery:- 1x carbon front spoiler Compatible vehicles:BMW G87 2 Series M2 Note: This is NOT an original BMW product!

€1,299.00*

Rear spoiler Ducktail PSM Performance Carbon | fits BMW M3 incl. Competition (G80) | Aulitzky Tuning

The ducktail made of pre-preg carbon fiber is a rear spoiler that perfectly emphasizes the style of the vehicle. Details:- 100% pure pre-preg carbon fibre construction- OEM style carbon fibre- High gloss finish- Ducktail design- Perfect fit- With parts certificate according to §19.3 Compatible vehicles:- BMW G80 M3/Competition (2021+) Note: This is NOT an original BMW product!

€349.00*

Side skirts MT Carbon | fits BMW M2 incl. Competition/CS (F87) N55/S55 | Aulitzky Tuning

The full-length side skirts in glossy carbon fiber are a great way to enhance the side profile of your F87. With their sleek lamella design, they ensure greater road presence and give your vehicle a more aggressive stance. Unlike regular carbon fibre, pre-preg carbon is reinforced to increase strength and durability. It can also be a staggering 70% lighter than other carbon fibre options.Prepreg carbon is far more uniform than other types of carbon, meaning the likelihood of imperfections is drastically reduced. The manufacturing process eliminates unwanted air bubbles and results in a perfectly smooth and high-gloss finish. Details:- 100% pure prepreg carbon fibre construction- OEM-style weave- High gloss finish- Fit guarantee- with parts certificate according to §19.3 Scope of delivery:- 1x pair of side skirts made from glossy prepreg carbon fibre Compatible vehicles:BMW F87 2er M2/Competition/CS N55/S55 Note: This is NOT an original BMW product!

€709.00*

KW V3 coilover suspension inox | fits Ford Focus Mk2 (DA) 2.5 ST | 35230023

KW V3 coilover suspension Unlimited individuality for performance & comfort. Separate damper force adjustment for rebound and compression damping.As with every KW coilover suspension, our suspension engineers also develop a sporty and harmonious basic set-up for the vehicle-specific applications of the KW V3. In addition to tests on our KW 7-post driving dynamics test bench, we also carry out extensive test drives on country roads, the motorway and even on the Nürburgring Nordschleife, kilometre by kilometre, to guarantee you the perfect suspension set-up. For years, the KW V3, one of the world's top aftermarket products, has been the reference for coilover suspensions. With its damper characteristics, high-quality workmanship and excellent durability, it has impressed discerning sports car drivers, tuners, large and small series manufacturers such as Alpina, MTM, Manthey, Oettinger and many other well-known companies in the international automotive industry. Cutting-edge technology from motorsportYou get much more than a sporty lowering and excellent handling on all roads with the KW V3. It is based on our many years of experience as a suspension manufacturer and supplier in international motorsport, such as in the ADAC GT Masters touring car series, FIA GT1, FIA GT3, International GT Open, WTC, VLN and also in the legendary ADAC Zurich 24h Race Nürburgring.Similar to our racing coilovers from the KW Competition programme, the rebound and compression damping of the KW V3 can be adjusted independently of each other. This individual tuning option is appreciated by tuners, sports car manufacturers, tuners and demanding drivers worldwide. The perfect suspension setup for significantly more driving dynamicsIf you have already carried out initial performance modifications to your sporty road vehicle, it is easy to incorporate these into the damper set-up in a targeted manner with the KW V3. The patented KW valve technology for the separate adjustment of the rebound and compression damping allows you to customise the vehicle-specific basic set-up from KW. For example, the KW bottom valve, which can be adjusted in twelve clicks in the low-speed range of the compression stage, gives you the freedom to even take the tyre characteristics of your high and ultra-high performance road tyres into account in the suspension set-up.Thanks to the patented compression adjustment at the lower piston end of the stainless steel housing, you don't even need any tools. The adjustable compression adjustment with its twelve precise clicks allows you to influence body roll and body roll movements by hand without having to change the rebound damping to match the spring rate.With the individually adjustable rebound damping of the KW V3, you can directly influence the handling and comfort through the exact click adjustment. Depending on the vehicle type, the rebound valves of the KW twin-tube dampers are adjusted at the upper end of the piston rod via an integrated adjustment wheel or the slip-on adjustment wheel included in the scope of delivery.By increasing the rebound force via the adjustment wheel, the body movements on the body are reduced. As a result, your car tracks more accurately and you have even more stability at higher cornering speeds. If, for example, you change from the approved wheel/tyre combinations of your car manufacturer to larger rims, you can use the KW V3 to perfectly match the handling of your car and your new alloy wheels. High-quality, customised and durableThe KW V3 is subjected to extensive quality tests during production and every single damper is checked. This is the only way we can fulfil our claim to provide a warranty of up to five years when a KW coilover suspension V3 is installed by a KW specialist dealer. Due to the filigree workmanship and the use of high-quality components, the KW coilover struts made of stainless steel, for example, are 100 per cent rust-free and have an unlimited service life.This means that the functionality of the stepless lowering system via the dirt-resistant KW trapezoidal thread and the KW polyamide threaded ring is not impaired even after many years. Thanks to the individual lowering with its stepless adjustment range, you can also emphasise the sportiness of your vehicle visually. A feature that is very popular in the performance-orientated tuning scene. - Freely adjustable damping technology in rebound and compression damping- inox-line stainless steel technology- Individual, stepless lowering- Tested adjustment range- high-quality components for a long service life- adjustable rebound damping with 16 exact clicks- 12-way adjustable compression damping with click adjustment- Unique, independently acting damping force adjustment Setup: The individually adjustable rebound & compression damping of the KW V3The KW V3 is the ideal accessory for performance-orientated drivers and tuning enthusiasts who demand a high level of sportiness from their vehicles. The dampers, which are separately adjustable in rebound and compression, allow extensive damper tuning with their sophisticated click adjustment. This makes it easy to directly influence the turn-in behaviour, directional stability, tyre grip and handling characteristics for safe controllability at the limit. Please note the conditions and instructions for this product: - VA + HA height adjustable (VA coilover struts, HA springs with height adjustment + damper) - When used with standard wheel/tyre combinations, additional standard wheel spacers from the accessories may be required Technical information: Lowering VA/HA (mm): 10-40/15-45 Design: V3 Hardness adjustment: Rebound and compression Material: Stainless steel Adjustment VA/HA: Thread/thread Approval: Parts certificate (§19.3) Compatible vehicles: Manufacturer Model Version Body Fuel Performance Displacement Cylinder Drive FORD FOCUS II (DA_) 07/2004-09/2013 2.5 ST Hatchback Petrol 166 KW 2522 ccm 5 Front-wheel drive

€2,278.85*

Intake system Carbon | fits VAG 1.8/2.0 T(F)SI EA888 Gen.3 incl. S3, TTS, Cupra, RS, GTI, Formentor | APR

Ratenrechner

Ask a question

Previously asked questions