Aulitzky Exhaust | Downpipe 3.54“ / 2.76” (90/70mm) | fits Audi RS3 8V quattro 367hp | Parts certificate

Facts: - replaces the main catalyst - with 2x 100 cell stainless steel sports catalyst - Euro 6 compatible - for non-OPF vehicles - without approval in the area of the StVZO Compatible vehicles:VehicleVehicle typePowerEngine capacityEngineYear of construction AudiS6 quattro (4G)309kW / 420hp3993cm³CEUC02.12 - 09.18 AudiS6 quattro (4G)331kW / 450hp3993cm³CTGE10.14 - 09.18 AudiRS6 quattro (4G)412kW / 560hp3993cm³CRDB, CWUB01.13 - 09.18 AudiRS6 performance quattro (4G)445kW / 605hp3993cm³CWUC11.15 - 09.18 AudiS7 quattro (4G)309kW / 420hp3993cm³CEUC02.12 - 03.15 AudiS7 quattro (4G)331kW / 450hp3993cm³CTGE07.14 - 05.18 AudiRS7 quattro (4G)412kW / 560hp3993cm³CRDB, CWUB10.13 - 04.18 AudiRS7 performance quattro (4G)445kW / 605hp3993cm³CWUC11.15 - 04.18 Note: Depending on the software version, the engine control light may light up. We recommend a software adjustment in this case.

Facts: Performance increase with up to 15 hp Material: Carbon Manufacturer: Eventuri Parts certificate: A certificate is available for this product for certain regions and vehicles (details below) Big cars - big intakes. With the intake system for the Audi RS6/RS7 C7, Eventuri sets new standards in precision and efficiency not only for itself but for the industry. Thanks to the two patented Eventuri air filters, the air flow is channelled laminar and without turbulence directly into the turbos. In addition to the rich sound of the intake, the Audi RS6/RS7 C7 intake comes with a significant increase in performance of up to 15 hp. The two-part, large heat shield ensures optimum shielding of the air flow from the engine heat. The heat shield cools itself through a small air slot between the insulating plates. The ingenious, fluid processing of the scoop for the air intake and the seamless transition into the patented Eventuri housing made of full carbon fibre ensure an individual and captivating look. The Eventuri intake for the Audi RS6/RS7 C7 comes in the following components: Carbon filter housing with integrated inlet pipe 2 efficient high-flow cones with urethane filter Carbon scoop Carbon filter cover CNC milled mount for the mass air flow sensor 2-piece main heat shield Laser-cut suspension The well-known Venturi effect is enhanced by Eventuri's technically ingenious product design. The alignment of the airflow through the elegant scoop creates a suction as it enters the filter housing through the filter, which compresses the airflow perfectly and directs it into the turbo. The optimised airflow then ensures a significant uplift in engine performance. Parts certificate The manufacturer's specifications apply to installation. An existing certificate is no guarantee that the product can also be installed in the corresponding vehicle. A certificate is available for this product for the following regions and vehicles: * DE/AT: Vehicle registration document, field K --- CH/LI: Vehicle licence, field 24 Country Model Type approval* DE/AT Audi RS6 (4G) e1*2007/46*0544*.. DE/AT Audi RS7 (4G) e1*2007/46*0544*.. Compatible vehicles:VehicleVehicle typePowerEngine capacityEngine typeYear of construction Audi A6 (C7)RS6 quattro412kW / 560hp3993cm³CRDB, CWUB01.13 - 09.18 Audi A6 (C7)RS6 performance quattro445kW / 605hp3993cm³CWUC11.15 - 09.18 Audi A7 (4G)RS7 quattro412kW / 560hp3993cm³CRDB, CWUB10.13 - 04.18 Audi A7 (4G)RS7 performance quattro445kW / 605hp3993cm³CWUC11.15 - 04.18

KW coilover springs The spring set with stepless lowering KW coilover springs are used to lower the vehicle in combination with the standard dampers. In contrast to conventional spring sets, individual height adjustment is possible within the tested adjustment range. This solution uses vehicle-specific spring mounts with matched KW lowering springs and suitable elastomers as well as dust protection systems. The standard damper system, for example with electronic or hydraulic control, remains active. Setup - sporty and harmonious spring rates The high-quality chrome-silicon steel springs used by KW coilover springs are matched to the respective standard suspension dampers and wheel loads in their spring rate for each specific vehicle. When developing the respective spring sets, we ensure that the spring rates also harmonise perfectly with the different damper characteristics of your adaptive standard suspension. So even with a KW coilover spring set, you will experience your car more directly and dynamically. KW coilover springs are suitable for car drivers who want to lower their vehicle discreetly and take advantage of an individual adjustment range. Stepless lowering Similar to a coilover suspension, the KW coilover springs allow a stepless lowering in a discreet range. This is not possible with conventional lowering springs. The dust protection elements and spring travel limiters included in the scope of delivery are always adapted to the maximum possible lowering. This means that the height-adjustable KW springs can be used to achieve a sporty, harmonious driving behaviour without compromising the driving dynamics of performance-oriented vehicles. Please note the conditions and instructions for this product: - Not for vehicles with level control / air suspension - VA + HA height-adjustable (spring set consisting of VA+HA springs with height adjustment, can only be used with standard dampers) Technical information: Lowering VA/HA (mm): 5-30/15-40 Adjustment HA: Thread Approval: Parts certificate (§19.3) Scope of delivery: Set (VA+HA) Compatible vehicles: Manufacturer Model Version Body Fuel Performance Displacement Cylinder Drive AUDI A6 Avant (4G) 4G5, 4GD, C7 05/2011-09/2018 RS6 performance quattro Kombi Petrol 445 KW 3993 ccm 8 All-wheel drive AUDI A6 Avant (4G) 4G5, 4GD, C7 05/2011-09/2018 RS6 quattro Estate Petrol 412 KW 3993 ccm 8 All-wheel drive AUDI A7 Sportback (4G) 4GA, 4GF 07/2010-05/2018 RS7 performance quattro Hatchback Petrol 445 KW 3993 ccm 8 All-wheel drive AUDI A7 Sportback (4G) 4GA, 4GF 07/2010-05/2018 RS7 quattro Hatchback Petrol 412 KW 3993 ccm 8 All-wheel drive

KW V4 coilover suspension incl. support bearings - State of the Art With the new KW V4 with its coilover struts made of stainless steel or aluminum, you give your super sports car the necessary reserves to further increase the driving dynamics. The three-way adjustable high-performance dampers with their independent adjustment of the rebound as well as low-speed and high-speed compression damping are based on the successful racing technology of the multiple overall winner of the ADAC Zurich 24h Race Nürburgring and, depending on the vehicle-specific version, have aluminum support bearings. The new KW V4 is developed exclusively for selected high-performance vehicles, which can be moved more safely at the limits of driving dynamics thanks to our KW suspension technology. - 3-way adjustable high-performance dampers with stainless steel coilover struts - Separate and independent damper adjustment in: - Rebound damping with 16 exact clicks + (firmer) / - (more comfortable) - Low-speed compression damping with 6 exact clicks + (firmer) / - (more comfortable) - High-speed compression damping with 14 exact clicks + (firmer) / - (more comfortable) - Two basic settings ex works with comfort setting and performance setting - Depending on the vehicle, aluminum support bearings are an integral part of the scope of delivery Please note the conditions and instructions for this product: - VA + HA height-adjustable (VA coilover struts, HA springs with height adjustment + damper) - Not for vehicles with level control / air suspension - Dampers have easy-to-use adjustment wheels. Due to the design, the rebound stage can only be adjusted if the piston rod is accessible. - Electronic damper control must be deactivated. Electronic kit for decommissioning is included in the scope of delivery. Technical information: Lowering VA/HA (mm): 10-35/10-35 Design: V4 Hardness adjustment: Rebound and compression Material: Stainless steel Adjustment VA/HA: Thread/thread Approval: Parts certificate (§19.3) Compatible vehicles: Manufacturer Model Version Body Fuel Performance Displacement Cylinder Drive AUDI A6 Avant (4G) 4G5, 4GD, C7 05/2011-09/2018 RS6 performance quattro Kombi Petrol 445 KW 3993 ccm 8 All-wheel AUDI A6 Avant (4G) 4G5, 4GD, C7 05/2011-09/2018 RS6 quattro estate Petrol 412 KW 3993 ccm 8 All-wheel drive AUDI A7 Sportback (4G) 4GA, 4GF 07/2010-05/2018 RS7 performance quattro hatchback Petrol 445 KW 3993 ccm 8 All-wheel drive AUDI A7 Sportback (4G) 4GA, 4GF 07/2010-05/2018 RS7 quattro hatchback Petrol 412 KW 3993 ccm 8 All-wheel drive For vehicles with DRC

The Endless pads are an excellent brake pad for everyday road use with sporadic track days. Despite reduced dust and noise emissions, the MX72 impresses with excellent deceleration values even in the high temperature range. In contrast to the ME20 and ME22 pads, the MX72 has heat protection plates.Coefficient of friction 0.37 - 0.47 µOperating temperature 50 - 700 °CSemi-metallic pad For the rear axle. Compatible vehicles:BMW 4-piston BMW (Performance) brake caliper, blue caliper for F-series vehicles, e.g. M135i M140i F20 F21, M235i M240i F22 F23, 335i 340i F30 F31 F34, 435i 440i F32 F33 F36, M2 F87, M3 F80,M4 F82 F83Alpina models such as the B3Motorsport articles - without STVZO approval.

The Wagner Tuning Competition Intercooler Kit EVO 1 for Audi RS3 8V / 8Y and TTRS 8S is suitable for:Audi RS3 8V Sportback 270KW/367PS 04/2015-04/2016Audi RS3 8V Sportback/Sedan 294KW/400PS 08/2017+Audi RS3 8Y Sportback/Sedan 294KW/400PS 2021+Audi TTRS 8S 294KW/400PS 11/2016+Audi RSQ3 F3 294KW/400PS 10/2019+Ready to give your Audi RS3 8V an impressive performance boost? The Competition high performance intercooler kit EVO1 is the answer you've been waiting for. With state-of-the-art technology and a customised design, this kit ensures an exciting driving experience. This high performance intercooler redefines performance. With mesh dimensions of 660mmx180mmx110mm and a mesh volume of 13,070 cm³, it offers an impressive 14% larger flow area and an astonishing 57% more charge air volume compared to the standard intercooler. The result? An explosive increase in performance and exceptional cooling capacity. Our intercooler is equipped with a high-quality Tube Fin mesh that uses internal turbulators to optimise airflow. Despite its impressive size, this cooler weighs just 8.3kg, meaning you get more power without the extra weight. Our cast aluminium end boxes were developed in the CAD system and optimised with flow analyses in the CFD system to perfect the internal airflow. The result is excellent cooling properties with minimal back pressure. Our kit is a completely ready-to-install package that allows for easy replacement of the standard intercooler - a true plug-and-play experience. No complex adjustments required. All our intercoolers are equipped with an anti-corrosion coating that not only protects against environmental influences, but also offers excellent heat conduction properties. This ensures constant and optimum cooling performance, accompanied by a significant increase in performance. Our product has been tested to withstand pressures of up to 6 bar in order to offer you reliability at the highest level. Quality is our top priority. All our products are subject to rigorous quality control to ensure they meet the highest standards. Designed specifically for racing, this kit offers the performance and reliability you need to excel on the track. Realise your performance dreams with the Competition high performance intercooler kit EVO1. Get the most out of your Audi RS3 8V now and experience a new dimension of driving pleasure! Advantages of the Wagner Tuning intercooler:- improved cooling performance- 14 % larger inflow area- 57 % more charge air volume- flow-optimised- Plug & Play Dimensions original intercooler:640mm x 163mm x 80mmV=8.3 litresA=1043 cm² Wagner Tuning intercooler dimensions:660mm x 180mm x 110mmV=13.07 litresA=1188 cm² Scope of delivery:1 intercooler (black coated)1 assembly instruction Attention: Not authorised in the area of the StVZO.

KW V4 coilover suspension incl. decommissioning for electric dampers - State of the Art With the new KW V4 with its stainless steel or aluminium coilover struts, you give your super sports car the necessary reserves to further increase the driving dynamics. The three-way adjustable high-performance dampers with their independent rebound adjustment as well as low-speed and high-speed compression damping are based on the successful racing technology of the multiple overall winner of the ADAC Zurich 24h Race Nürburgring and, depending on the vehicle-specific version, have aluminium support bearings. The new KW V4 is developed exclusively for selected high-performance vehicles, which can be moved more safely at the limits of driving dynamics thanks to our KW suspension technology. - 3-way adjustable high-performance dampers with stainless steel coilover struts- Separate and independent damper adjustment in:- Rebound damping with 16 exact clicks + (firmer) / - (more comfortable)- Low-speed compression damping with 6 exact clicks + (firmer) / - (more comfortable)- High-speed compression damping with 14 exact clicks + (firmer) / - (more comfortable)- Two basic factory set-ups with comfort setting and performance setting- Depending on the vehicle, aluminium support bearings are an integral part of the scope of delivery Please note the conditions and instructions for this product:- VA + HA height-adjustable (VA coilover struts, HA springs with height adjustment + dampers)- Dampers have easy-to-operate adjustment wheels. Due to the design, the rebound stage can only be adjusted when the piston rod is accessible.- Electronic damper control must be deactivated. Electronic kit for decommissioning is included in the scope of delivery.- Variant 4 / Variant 5 Suspension struts / dampers made of aluminium or combined on each axle made of aluminium and stainless steel- In the case of increased wheel camber values on the front axle, we recommend the continuously adjustable camber correction for the designated vehicles (see KW accessories). Technical information:Lowering VA/HA (mm): 5-35/15-45Version: V4Hardness adjustment: Rebound and compression dampingMaterial: AluminiumAdjustment VA/HA: thread/threadApproval: Parts certificate (§19.3) Compatible vehicles:Manufacturer Model Version Body Fuel Performance Displacement Cylinder DriveMERCEDES-BENZ C-KLASSE Cabriolet (A205) 204, 204 AMG 06/2016- AMG C 63 (205.486) Cabriolet Petrol 350 KW 3982 ccm 8 Rear-wheel driveMERCEDES-BENZ C-CLASS Cabriolet (A205) 204, 204 AMG 06/2016- AMG C 63 S (205.487) Cabriolet Petrol 375 KW 3982 ccm 8 Rear-wheel driveMERCEDES-BENZ C-CLASSE Coupe (C205) 204, 204 AMG 10/2015- AMG C 63 (205.386) Coupe Petrol 350 KW 3982 ccm 8 Rear-wheel driveMERCEDES-BENZ C-KLASSE Coupe (C205) 204, 204 AMG 10/2015- AMG C 63 S (205.387) Coupe Petrol 375 KW 3982 ccm 8 Rear-wheel driveMERCEDES-BENZ G-CLASS (W463) 463A 01/2018- G 500 (463.260, 463.261) Off-road vehicle closed petrol 310 KW 3982 ccm 8 all-wheel drive

The Steering wheel clip made of pre-preg carbon fiber perfectly emphasize the style of the vehicle.Details:- 100% pure pre-preg carbon fibre construction- OEM style carbon fibre- High gloss finish- Perfect fit- Registration free Compatible vehicles: - BMW F80 M3 Limousine - BMW F82 M4 Coupé - BMW F83 M4 Cabrio - BMW F87 M2 Note: This is NOT an original BMW product!

The Aulitzky Tuning Cooler and intake package for the S58 engines of the G8x series was developed to meet the high demands of the engine. With combination certificate!* Compatible vehicles:VehicleVehicle typePowerCapacityEngineYear of construction BMW 2er (G87)M2338kW / 460hp2993cm³S58 B30 A11.22 - BMW 3 Series (G80)M3353kW / 480hp2993cm³S58 B30 B11.20 - BMW 3 Series (G80/G81)M3 Competition / xDrive375kW / 510hp390kW / 530hp2993cm³S58 B30 A05.21 -07.24 - BMW 3 Series (G80)M3 CS xDrive405kW / 551hp2993cm³S58 B30 A03.23 - BMW 4 Series (G82)M4353kW / 480hp2993cm³S58 B30 B11.20 - BMW 4 Series (G82/G83)M4 Competition / M xDrive375kW / 510hp2993cm³S58 B30 A11.20 - BMW 4 Series (G82)M4 CSL xDrive405kW / 551hp412kW / 560hp2993cm³S58 B30 A05.22 - 02.2311.22 - 02.23 *The combination certificate for the pre-facelift and facelift models is available (includes intake manifold, intake, intercooler, boost pipe kit, downpipe, exhaust system, 670hp Aulitzky App performance increase and 107dB increase in stationary noise).