Rear spoiler Ducktail V-Style Carbon | fits BMW M2/M240i/2 Series (G87/G42) | Aulitzky Tuning

The rear spoiler made of Pre-Preg carbon fibre gives your vehicle a distinctly sporty aggressiveness and gives it a lot of presence on the road.Details:- Constructed from 100% pure pre-preg carbon fibre- OEM style weave- High-gloss finish- Perfect fit- registration according to §21 possible Scope of delivery:1x ducktail in prepreg carbon Compatible vehicles:BMW M5 G90BMW i5 G60BMW 5 Series G60Note: This is NOT an original BMW product!

KW V3 Clubsport coilover suspension incl. support bearings With an uncompromising technology transfer from racing to the road, the KW Clubsport coilovers convince. The KW Clubsport coilovers convince with their uncompromising combination of high-end racing technology with maintenance-free KW original equipment components and expertises. This gives you the ideal accessories to realise the full potential of your sports car at trackdays, sports driver training courses, tourist drives on Grand Prix circuits and on the Nürburgring Nordschleife. Developed for the toughest racetrack in the world: the Nürburgring Nordschleife Even in their basic set-up, KW Clubsport coilovers are tuned to the different track surfaces, steep bends, jumps and chicanes of the 20.8 kilometre long Nürburgring Nordschleife. After all, as one of the most successful suspension manufacturers and suppliers in motorsport, we are at home on the Nordschleife. In the VLN Endurance Championship alone, we equip over 70 racing teams and, as a suspension manufacturer, have supported six overall victories at the ADAC Zurich 24h Race Nürburgring in ten years. The winner of the ADAC GT Masters 2011 also relies on our racing expertise, from which the KW Clubsport coilovers benefit. The basic setup of the KW V3 Clubsport and KW V4 Clubsport with separate expansion tank, which is perfectly adapted to the Nordschleife, allows you to adjust your sports car even more individually to the desired sports tyre setup thanks to the numerous adjustment options. In addition to optionally available adjustable support bearings, you can adjust the damping forces of the KW Clubsport coilovers independently in the rebound and compression stages with the integrated KW V3 Clubsport coilover suspension technology like in racing With the adjustment wheels for the rebound adjustment, you can fine-tune the recommended basic setup for your sports car and your individually installed performance components with 16 exact clicks. This allows you to directly influence changed wheel loads, for example to influence bodywork movements. Separate from the rebound adjustment, the KW V3 Clubsport allows you to adjust the compression damping with twelve exact clicks in the low-speed range to your requirements, such as the sports tyres used. These setting options allow you to consider individual setups to suit the vehicle weight, sports tyre characteristics, track characteristics and operating conditions. - Freely adjustable damping technology in rebound and compression damping - Stainless steel technology "inox-line" - Stepless lowering - Tested adjustment range - high-quality components for a long service life - Adjustable rebound damping with 16 exact clicks - Adjustable compression damping with 12 exact clicks - Unique, independently acting damping force adjustment - optionally available with aluminium Unibal support bearing. Setup: Application range and damper tuning The KW V3 Clubsport coilover suspensions impress with their vehicle-specific setup for trackday events on the Nürburgring Nordschleife, as well as the possibility of quickly tuning these suspensions for other racetracks and individual performance sports cars. Please note the conditions and instructions for this product: - VA + HA height-adjustable (VA coilover struts, HA springs with height adjustment + dampers) - When used with standard wheel/tyre combinations, additional commercially available track wideners from the accessories may be required - For vehicles with electronic damper control, this must be deactivated. Vehicle-specific KW decommissioning kits can be found in the accessories table. - The dampers have easy-to-operate adjustment wheels. Due to the design, the rebound damping can only be adjusted when the piston rod is accessible. - Clubsport suspension with support bearing: only available with VA support bearing Technical information: Lowering VA/HA (mm): 10-35/10-35 Version: V3 Clubsport Height adjustment: Rebound and compression damping Material: Stainless steel Adjustment VA/HA: thread/thread Approval: Parts certificate (§19.3) Compatible vehicles: BMW 3 Series (F30, F80) 3-HY, 3L, M3, M3 GTS 03/2011-10/2018 M3 notchbackPetrol 317 KW 2979 ccm 6 Rear-wheel drive BMW 3 Series (F30, F80) 3-HY, 3L, M3, M3 GTS 03/2011-10/2018 M3 CompetitionNotchback petrol 331 KW 2979 ccm 6 rear-wheel drive BMW 3 Series (F30, F80) 3-HY, 3L, M3, M3 GTS 03/2011-10/2018 M3 CS notchbackPetrol 338 KW 2979 ccm 6 rear-wheel drive BMW 4 Series Coupe (F32, F82) 3C, M3, M3 GTS 07/2013- M4 CoupePetrol 317 KW 2979 ccm 6 rear-wheel drive BMW 4 Series Coupe (F32, F82) 3C, M3, M3 GTS 07/2013- M4 Competition CoupePetrol 331 KW 2979 ccm 6 rear-wheel drive BMW 4 Series Coupe (F32, F82) 3C, M3, M3 GTS 07/2013- M4 CS CoupePetrol 338 KW 2979 ccm 6 rear-wheel drive

KW V4 coilover suspension incl. support bearings - State of the Art With the new KW V4 with its coilover struts made of stainless steel or aluminum, you give your super sports car the necessary reserves to further increase the driving dynamics. The three-way adjustable high-performance dampers with their independent adjustment of the rebound as well as low-speed and high-speed compression damping are based on the successful racing technology of the multiple overall winner of the ADAC Zurich 24h Race Nürburgring and, depending on the vehicle-specific version, have aluminum support bearings. The new KW V4 is developed exclusively for selected high-performance vehicles, which can be moved more safely at the limits of driving dynamics thanks to our KW suspension technology. - 3-way adjustable high-performance dampers with stainless steel coilover struts - Separate and independent damper adjustment in: - Rebound damping with 16 exact clicks + (firmer) / - (more comfortable) - Low-speed compression damping with 6 exact clicks + (firmer) / - (more comfortable) - High-speed compression damping with 14 exact clicks + (firmer) / - (more comfortable) - Two basic settings ex works with comfort setting and performance setting - Depending on the vehicle, aluminum support bearings are an integral part of the scope of delivery Please note the conditions and instructions for this product: - VA + HA height-adjustable (VA coilover struts, HA springs with height adjustment + damper) - Not for vehicles with level control / air suspension - Dampers have easy-to-use adjustment wheels. Due to the design, the rebound stage can only be adjusted if the piston rod is accessible. - Electronic damper control must be deactivated. Electronic kit for decommissioning is included in the scope of delivery. Technical information: Lowering VA/HA (mm): 10-35/10-35 Design: V4 Hardness adjustment: Rebound and compression Material: Stainless steel Adjustment VA/HA: Thread/thread Approval: Parts certificate (§19.3) Compatible vehicles: Manufacturer Model Version Body Fuel Performance Displacement Cylinder Drive AUDI A6 Avant (4G) 4G5, 4GD, C7 05/2011-09/2018 RS6 performance quattro Kombi Petrol 445 KW 3993 ccm 8 All-wheel AUDI A6 Avant (4G) 4G5, 4GD, C7 05/2011-09/2018 RS6 quattro estate Petrol 412 KW 3993 ccm 8 All-wheel drive AUDI A7 Sportback (4G) 4GA, 4GF 07/2010-05/2018 RS7 performance quattro hatchback Petrol 445 KW 3993 ccm 8 All-wheel drive AUDI A7 Sportback (4G) 4GA, 4GF 07/2010-05/2018 RS7 quattro hatchback Petrol 412 KW 3993 ccm 8 All-wheel drive For vehicles with DRC

KW V3 coilover suspension Unlimited individuality for performance & comfort. Separate damper force adjustment for rebound and compression damping.As with every KW coilover suspension, our suspension engineers also develop a sporty and harmonious basic set-up for the vehicle-specific applications of the KW V3. In addition to tests on our KW 7-post driving dynamics test bench, we also carry out extensive test drives on country roads, the motorway and even on the Nürburgring Nordschleife, kilometre by kilometre, to guarantee you the perfect suspension set-up. For years, the KW V3, one of the world's top aftermarket products, has been the reference for coilover suspensions. With its damper characteristics, high-quality workmanship and excellent durability, it has impressed discerning sports car drivers, tuners, large and small series manufacturers such as Alpina, MTM, Manthey, Oettinger and many other well-known companies in the international automotive industry. Cutting-edge technology from motorsportYou get much more than a sporty lowering and excellent handling on all roads with the KW V3. It is based on our many years of experience as a suspension manufacturer and supplier in international motorsport, such as in the ADAC GT Masters touring car series, FIA GT1, FIA GT3, International GT Open, WTC, VLN and also in the legendary ADAC Zurich 24h Race Nürburgring.Similar to our racing coilovers from the KW Competition programme, the rebound and compression damping of the KW V3 can be adjusted independently of each other. This individual tuning option is appreciated by tuners, sports car manufacturers, tuners and demanding drivers worldwide. The perfect suspension setup for significantly more driving dynamicsIf you have already carried out initial performance modifications to your sporty road vehicle, it is easy to incorporate these into the damper set-up in a targeted manner with the KW V3. The patented KW valve technology for the separate adjustment of the rebound and compression damping allows you to customise the vehicle-specific basic set-up from KW. For example, the KW bottom valve, which can be adjusted in twelve clicks in the low-speed range of the compression stage, gives you the freedom to even take the tyre characteristics of your high and ultra-high performance road tyres into account in the suspension set-up.Thanks to the patented compression adjustment at the lower piston end of the stainless steel housing, you don't even need any tools. The adjustable compression adjustment with its twelve precise clicks allows you to influence body roll and body roll movements by hand without having to change the rebound damping to match the spring rate.With the individually adjustable rebound damping of the KW V3, you can directly influence the handling and comfort through the exact click adjustment. Depending on the vehicle type, the rebound valves of the KW twin-tube dampers are adjusted at the upper end of the piston rod via an integrated adjustment wheel or the slip-on adjustment wheel included in the scope of delivery.By increasing the rebound force via the adjustment wheel, the body movements on the body are reduced. As a result, your car tracks more accurately and you have even more stability at higher cornering speeds. If, for example, you change from the approved wheel/tyre combinations of your car manufacturer to larger rims, you can use the KW V3 to perfectly match the handling of your car and your new alloy wheels. High-quality, customised and durableThe KW V3 is subjected to extensive quality tests during production and every single damper is checked. This is the only way we can fulfil our claim to provide a warranty of up to five years when a KW coilover suspension V3 is installed by a KW specialist dealer. Due to the filigree workmanship and the use of high-quality components, the KW coilover struts made of stainless steel, for example, are 100 per cent rust-free and have an unlimited service life.This means that the functionality of the stepless lowering system via the dirt-resistant KW trapezoidal thread and the KW polyamide threaded ring is not impaired even after many years. Thanks to the individual lowering with its stepless adjustment range, you can also emphasise the sportiness of your vehicle visually. A feature that is very popular in the performance-orientated tuning scene. - Freely adjustable damping technology in rebound and compression damping- inox-line stainless steel technology- Individual, stepless lowering- Tested adjustment range- high-quality components for a long service life- adjustable rebound damping with 16 exact clicks- 12-way adjustable compression damping with click adjustment- Unique, independently acting damping force adjustment Setup: The individually adjustable rebound & compression damping of the KW V3The KW V3 is the ideal accessory for performance-orientated drivers and tuning enthusiasts who demand a high level of sportiness from their vehicles. The dampers, which are separately adjustable in rebound and compression, allow extensive damper tuning with their sophisticated click adjustment. This makes it easy to directly influence the turn-in behaviour, directional stability, tyre grip and handling characteristics for safe controllability at the limit. Please note the conditions and instructions for this product: - VA + HA height-adjustable (VA coilover struts, HA springs with height adjustment + dampers) - Dampers have easy-to-use adjustment wheels. Due to the design, the rebound stage can only be adjusted when the piston rod is accessible. Technical information: Lowering VA/HA (mm): 15-40/25-50 Design: V3 Hardness adjustment: Rebound and compression Material: Stainless steel Adjustment VA/HA: Thread/thread Approval: Parts certificate (§19.3) Compatible vehicles: Manufacturer Model Version Body Fuel Performance Displacement Cylinder Drive FORD FIESTA VII (JHH) 05/2017- 1.5 ST EcoBoost Hatchback Petrol 147 KW 1496 ccm 3 Front-wheel drive