Performance upgrade with certificate | fits VW Golf 7 GTI Performance, Skoda Octavia RS | 2.0 TSI EA888 Gen.3 DLBA 245hp

The Competition intercooler kit is suitable for:VW Polo AW GTI 2.0TSI (147-152KW/200-207PS) from 2018Audi A1 GB 40TFSI (147KW/200PS) from 2018**Note: Modifications to the inside of the bumper are necessary on the Audi A1. Increase the performance of your VW Polo AW GTI 2.0TSI / Audi A1 GB 40TFSI with the Competition Intercooler Kit from Wagner Tuning. This kit has been specially developed to fulfil the requirements of your vehicle and offer you an incomparable driving experience. The high-performance intercooler has a new type of competition mesh (Tube Fin) with the dimensions 600 mm x 167 [101] mm x 125 [90] mm [stepped]. With an external net volume of 11.14 litres, this intercooler offers an impressive 24% larger frontal inflow area and 73% more external net volume compared to the standard intercooler. The cast aluminium end boxes were designed in CAD and optimised using CFD simulations to ensure ideal internal airflow. The result is outstanding cooling properties with minimal back pressure. This kit is therefore ideal for racing and offers optimum cooling of the supercharged air. The Wagner Tuning intercoolers are provided with a high-quality anti-corrosion coating, which ensures a long-lasting and optimum cooling effect even under extreme conditions. They can be easily fitted to the original mounting points and are simple to install thanks to the "plug-and-play" design. You can rely on the high quality of our products, which are subject to constant quality monitoring. Enhance your driving experience and get the best out of it with the Competition Intercooler Kit from Wagner Tuning. Advantages of the Wagner Tuning intercooler:- improved cooling performance- 24% larger inflow area- 73% more net volume- Minimal back pressure- Inlet diameter Ø60 mm ; outlet diameter Ø60 mm- Plug & Play Mesh OEM intercooler:700 mm x 115 mm x 80 mmV = 6.44 LITRESA = 805 cm² Mesh Wagner Tuning intercooler:600 mm x 167 [101] mm x 125 [90] mm [stepped]V = 11.14 LA = 1002 cm² Scope of delivery:1 intercooler2 Silicone hose1 installation material1 installation instruction Attention: Not authorised in the area of the StVZO.

The Wagner Tuning silicone hose kit fits the following vehicles with N54 & N55 engine:BMW 335 (x)i E90/E91/E92/93 2006-2011BMW 335is E92 2009-2013BMW 135i E82/E88 2008-2013BMW 1 Series M E82 2011-2013 Upgrade your vehicle with the high-quality silicone hose kit EVO2/EVO3 for E82/E90 from Wagner Tuning. Designed to improve the performance and durability of your vehicle, this kit offers a premium solution for enthusiasts who want to get the best out of their vehicle. Compatibility:This hose kit has been specially developed for use with our orig. intercooler EVO2 orig. intercooler EVO3 and EVO2/ EVO3 and is therefore perfectly matched to these models. This hose kit is only compatible with our Wagner Tuning intercooler. High quality materials: The silicone hoses are made of high quality material and offer a reinforced design for maximum durability and reliability.Improved performance: By using this kit, the airflow is optimized, resulting in improved performance and a responsive engine.Easy installation: The kit comes with all necessary mounting materials and is easy to install. No complicated modifications required.Optimum design: The kit has been specially developed for E82 E90 models and offers a perfect fit and optimum performance. Scope of delivery:1 reinforced silicone hose inlet1 silicone hose outlet1 aluminum adapter for LLK intake manifold1 set of 12mm stainless steel Norma clampsMounting material for easy installation Note: The item image is for illustrative purposes only. The actual shape of the product may vary slightly.

KW V1 coilover suspension Sportiness paired with outstanding looks. With factory pre-configured damping.Our entry-level model for more driving pleasure through an appealing and individually adjustable lowering is the KW V1 coilover suspension in the KW typical "inox-line". Thanks to its high-quality workmanship, the consistent use of stainless steel struts, corrosion-resistant springs and harmonised components, it stands for many years of driving pleasure - and not just for the life of the car. Stepless loweringThe KW V1 enables maximum lowering within the tested adjustment range. This varies depending on the vehicle model and can, for example, be between 30 and 70 millimetres or 50 to 90 millimetres for an individual lowering. Thanks to the dirt-resistant trapezoidal thread and the polyamide threaded ring, the stepless lowering can be varied quickly and easily even years later. Depending on the vehicle, the lowering is carried out either on the wheel-guiding KW stainless steel suspension struts or on the rear axle height adjustment for non-wheel-guiding double-wishbone rear axles. The benchmark for sporty, dynamic tuning fansWith its harmonious basic set-up for sporty driving on the road, the KW V1 convinces the discerning tuning fan. Our development engineers determine a specific damper set-up and spring rate for each vehicle in order to increase your driving pleasure with the optimum balance of sportiness and suitability for everyday use. After all, you are not buying just any coilover suspension, but a KW coilover suspension that has been specially developed and tuned for your vehicle type. As a manufacturer, KW only uses its own resources, high-quality components and the same damper technology as mass-produced manufacturers. With the KW V1, the rolling and rolling movements of the vehicle body are reduced during compression, allowing you to benefit from unadulterated directness and sportier handling when driving. Our experience for your driving pleasureAs a manufacturer of customised suspension solutions for road and racing, we have been the market leader and innovation driver for over 25 years. No matter where in the world, sporty drivers, car manufacturers and tuners rely on our KW coilovers "Made in Germany". Every KW coilover suspension is subjected to extensive load tests during production and is developed and manufactured directly at our company headquarters in Fichtenberg, Swabia, in order to fulfil the high standards of our KW quality management. As a German manufacturer, it is a matter of course for us to provide a multi-year warranty on our KW coilover suspension kits, which exceed OEM quality and cover over 4,600 applications. When installed by one of our KW specialist dealers, this warranty is valid for up to five years. - Optimally adjusted in advance- sporty and harmonious damping technology- Stainless steel technology "inox-line"- Individually height-adjustable- Tested adjustment range- Ready-to-install complete solution- High-quality components for a long service life- Complete documentation for easy handling Setup - factory pre-configured damping setupThe KW V1 has a vehicle-specific, permanently configured damper setup. The spring and the damper are perfectly matched to each other so that you experience an optimum balance of sportiness and suitability for everyday use when driving. Even with a full payload and maximum axle loads, the dampers always work with a sporty characteristic curve. The KW V1 is particularly interesting for tuning enthusiasts who prioritise the show & shine concept. Please note the conditions and instructions for this product: - VA + HA height-adjustable (VA coilover struts, HA springs with height adjustment + damper) Technical info: Lowering VA/HA (mm): 25-50/20-45 Version: V1 Hardness adjustment: none Material: stainless steel Adjustment VA/HA: thread/thread Approval: parts certificate (§19.3) Compatible vehicles: Manufacturer Model Version Body Fuel Performance Displacement Cylinder Drive FORD FOCUS II (DA_) 07/2004-09/2013 2.5 RS Hatchback Petrol 224 KW 2521 ccm 5 Front-wheel drive FORD FOCUS II (DA_) 07/2004-09/2013 2.5 RS 500 Hatchback Petrol 257 KW 2521 ccm 5 Front-wheel drive

CSF Race BMW E9x high performance power steering cooler - Changes from OEM mechanically encapsulated core design to CAB brazed high efficiency plate design- Manufactured with CSF's AC condenser technology using a 1-row super high pressure 18mm wide 4-channel microtube- Dual-pass 6-line design with an 83% increase in surface area compared to the OEM unit- Drop-in fit requires no modifications for assembly- Accepts all adhering OEM components including oil line connectors, mounting brackets and AC condenser- Lab tested, ~ 40% more efficient than OEM coolers- The world's first true "plug-and-play" steering cooler for the E9x M3 platform* Increasing the one-size-fits-all (83mm or 3.27" height overall) orientation from the OEM position towards the top of the radiator. This allows the radiator to work with any aftermarket compressor heat exchanger or auxiliary coolers that may be located below the OEM power steering cooler Compatible vehicles:BMW 3 (E90) M3 2007-2011BMW 3 (E90) M3 CRT 2011-2011BMW 3 Convertible (E93) M3 2008-2013BMW 3 Coupe (E92) M3 2007-2013BMW 3 Coupe (E92) M3 GTS 2007-2013