Panel Filter | fits BMW Z4M (E85/E86) 343hp S54 | Eventuri

Facts: more power, better response behaviour and a new sound experience Material: Carbon Manufacturer: Eventuri Parts certificate: A certificate is available for this product for certain regions and vehicles (details below) The Eventuri Carbon Kevlar intake system for F10 is designed to increase engine performance, improve handling and enhance the overall driving experience. Using an inverted cone shaped filter enclosed in a carbon/kevlar housing, Eventuri utilises the so-called Venturi effect. The result is an even laminar airflow, which not only provides more power but also better response behaviour and a new sound experience. The airbox is manufactured using the pre-preg process. The intake system is supplied complete with a parts certificate! Parts certificate The manufacturer's specifications apply for installation. An existing certificate is no guarantee that the product can also be installed in the corresponding vehicle. A certificate is available for this product for the following regions and vehicles: * DE/AT: Vehicle registration document, field K --- CH/LI: Vehicle licence, field 24 Country Model Type approval* DE/AT BMW M5 (F10) e1*xx/xx*0361*.. DE/AT BMW M6 (F06) e1*xx/xx*0361*.. DE/AT BMW M6 (F12) e1*xx/xx*0361*.. DE/AT BMW M6 (F13) e1*xx/xx*0361*.. Compatible vehicles:VehicleVehicle typePower outputDisplacementEngineYear of construction BMW 5 Series (F10)M5412kW / 560PS4395ccS63 B44 B09.11 - 10.16

No detail is too small to customise: Enthusiasts know that every change can make a big difference. The same goes for this AutoTecknic carbon fibre side vent kit. When it comes to carbon fibre, you're guaranteed to get a unique and lightweight design, not to mention incredible robustness. Leave no stone unturned when it comes to your vehicle. Bring your vision to life with AutoTecknic. Product info:- Suitable for F95 X5M models- 2x2 glossy carbon fibre fabric- Sold as a pair (as a set)- OEM X5M side grills are not included Compatible vehicles:BMW X5 (G05, F95) M 2019-2023BMW X5 (G05, F95) M Competition since 2019

The Competition intercooler kit is suitable for the following models:Kia Cee'd (CD) GT 1,6TGDI 150KW/204hp 2018+Kia ProCee'd (CD) GT 1,6TGDI 150KW/204hp 2018+Kia Forte GT 1,6TGDI 150KW/204hp 2018+Hyundai Elantra Sport, GT-Line, GTS 1,6TGDI 150KW/204hp 2017+Hyundai Veloster Turbo 1,6TGDI 150KW/204hp 2018+ Get the best out of your Kia (Pro)Cee'd GT with the Wagner Tuning high performance intercooler. This innovative kit has been specially developed to meet the demands of your vehicle and provide a unique driving experience. The high-performance intercooler features an innovative competition mesh (Tube Fin) with the dimensions 580 mm x 120 mm x 150 mm + 580 mm x 62 mm x 70 mm (stepped mesh: 12.96 liters). This net offers an impressive 60 % larger inflow area and 118 % more net volume compared to the standard intercooler. Experience optimal cooling and a significant increase in performance for your Kia (Pro)Cee'd GT. The cast aluminium end boxes were designed in CAD and optimized through CFD simulations to ensure ideal internal airflow. The result is outstanding cooling properties with minimal back pressure. In addition, the newly developed competition high-performance mesh with a specially manufactured air baffle ensures sufficient airflow to the adjacent components such as the water cooler. This kit is therefore ideal for racing and offers optimum cooling of the supercharged air. The Wagner Tuning intercoolers are provided with a high-quality anti-corrosion coating, which ensures a long-lasting and optimum cooling effect even under extreme conditions. They can be easily fitted to the original mounting points and are simple to install thanks to the “plug-and-play” design. You can rely on the high quality of our products, which are subject to constant quality monitoring. Discover the performance and possibilities of the Wagner Tuning high-performance intercooler and let your Kia (Pro)Cee'd GT shine in new splendor. Experience improved performance, impressive cooling capacity and maximum driving pleasure. Advantages of the Wagner Tuning intercooler:- improved cooling performance- 60% larger inflow area- 118% more net volume- Minimal back pressure and optimized air cooler- Plug & Play Inlet and outlet diameter: Ø65mm Mesh OEM intercooler:V = 5.94 LA = 660 cm² Mains Wagner Tuning intercooler:V = 12.96 L (+118%)A = 1055 cm² (+60%) Scope of delivery:1 intercooler2 silicone hoses1 air baffle1 mounting material1 installation instructionAttention: Not approved in the area of the StVZO.

The Competition Intercooler Upgrade Kit is suitable for:Porsche Macan 2,0TFSI 2014-2018 (174KW/237hp)Porsche Macan 2,0TFSI 2018-2021 (180KW/245hp)Porsche Macan 2,0TFSI 2016-2018 (185KW/252hp) Unleash the true power of your Porsche Macan 2.0 TSI with the Competition Intercooler Kit Ready to take your Porsche Macan 2.0 TSI to a new level of performance? With the high-performance intercooler from Wagner Tuning, this dream becomes a reality. The figures speak for themselves: with impressive mesh dimensions of 610 mm x 440 mm x 65 mm (= 17,446L), this cooler offers an impressive 178% larger airflow area and a whopping 158% more charge air volume compared to the original. The competition high-performance mesh with internal turbulators sets new standards. And the best thing? All this power comes at a weight of just 9.1 kg. The cast aluminum end boxes are the result of CAD precision and CFD simulations for optimal internal airflow. An air guide integrated into the end box ensures even filling of the Competition high-performance mesh. With connection diameters of Ø67 mm, this kit is equipped with reinforced silicone hoses. The back pressure of this intercooler is significantly lower than that of the standard intercooler. The anti-corrosion coating with excellent heat conduction properties is the secret to long-lasting, optimum cooling and a noticeable increase in performance. This complete kit is ready to install and can be easily replaced with the standard intercooler. Perfection in every respectPressure-resistant up to 6 bar and perfectly tuned for racing, this product, like all our other products, is subject to strict quality control. Ready to take your Porsche Macan 2.0 TSI to the next level? Choose the COMPETITION CHARGE AIR COOLER KIT and feel the difference. Advantages of the Wagner Tuning intercooler:- Improved cooling performance- 178% larger inflow area- 158% more charge air volume- Connection diameter of Ø67 mm- Lower back pressure- Plug & Play Scope of delivery:1 intercooler1 air duct2 charge air hoses4 hose clamps1 mounting material1 assembly instructionsAttention: Not approved in the area of the StVZO.

Your Leon/Formentor is missing a data display! Here we present the data display for the Cupra Formentor and Seat Leon or Cupra Leon. Access to all data from the engine control unit:So ALL. The sensors are queried directly via CanBus and are displayed on our tried and tested MFD28. The Cupra Formentor display comes with a vehicle-specific panel and fits into the interior like an original part. The ventilation remains intact through the slots. The sensors are queried by the CanBus via the manufacturer-specific protocol. We have optimized the protocol to achieve maximum polling speed. Details:- integrates perfectly into the vehicle interior- Up to 64 sensors can be queried- 10 individually configurable views with our DSS - Display Setup Software- ready-made views for a quick start with our display- simply plug and play via our cable set - plug in, done- 4 additional analog inputs for exhaust gas temperature, oil pressure and more- Best readability - optional anti-reflective film included- Query the sensors like manufacturer diagnostic tools Performance meter:Measure your acceleration times in our performance widget - 0-100, 100-200, 0-200 Data jogging:Log all data to the internal SD card. Whether “on-demand” (start with a tap) or permanent. All data from your last turn is saved. Preset Alarms:Preset alerts can be easily activated and also customized. For example, receive a large warning message if the exhaust gas temperature is above 900 degrees. 4 additional analog inputs:Additional temperature and/or pressure sensors can be connected for further monitoring options. e.g. exhaust gas temperature or exhaust gas back pressure. An ethanol sensor can be connected to one of the digital inputs. Read out/delete errors:Read out errors from the engine control unit in plain text and also delete them Individual designWhether it's the individual start screen or the selection from a variety of different widgets. Make the display your display! Access to all data from the engine control unit:We supply your display with a ready-made TRI file as standard. All sensors that are queried are defined here. Temperatures:Engine water temperature, intake temperature, exhaust temperature, transmission temperature Pressures:Boost pressure, ambient pressure, oil pressure Lambda/mixture:Lambda value target/actual, short-term lambda adjustment, long-term lambda adjustment, MAF, engine load, torque Driver dynamics:Brake pressure, vehicle speed, throttle angle/gas pedal position Other:RPM, total ignition angle, gear, battery voltage, ignition angle reduction per cylinder Analog inputs:Additional sensors can be added here: Oil temperature, fuel pressure, oil pressure, exhaust gas temperature, etc. but also an ethanol sensor (Flex Fuel) If values are missing, they can easily be added. ATTENTION: not every engine offers all values! For which engines and models is the Cupra Formentor display:The display panel fits all Cupra Formentor and Seat Leon 4 left-hand drive vehicles (LHD). A version for RHD (right-hand drive) is in progress. MFD28 Technical data:- Dimensions: 70.3 x 52mm - Hardware: 2.8” TFT screen, touchscreen, MicroSD, MicroUSB- High-quality milled aluminum front frame- Symmetrical display - ideal for rotating it by 90- Views completely freely configurable on the PC with our DSS - Display Setup Software- Up to 64 widgets per display- 64 sensors (Can Bus + internal)- 10 views- 4x analog inputs- Optional external switching flash- Can bus switching- Can Bus protocols: UDS, KWP2000, OBD Supported values:Many KViele customers always ask: “Which values can I query from my control unit”. The answer: “ALL”. Our MFD28 is compatible with ISO 11898-2 and SAE J2284.The control unit manufacturers themselves determine which values are sent via the CAN bus interface. The documentation is important here - possibly even in the form of a DBC file that can be imported directly. You can also access our extensive list of already implemented control units. This can be found in the download area. A total of up to 50 sensors can be queried if the manufacturer supports this.Broadcast data as well as OBD2 queries via Can Bus (11bit/29bit) are implemented. Special protocols such as TP2.0 from VW/Audi and UDS are also available. DSS - Display Setup Software:With our DSS - Display Setup Software, the display can be conveniently configured on the PC. The Can Bus protocol can be customized, you can import DBC files and design the displays with your own widgets.The log viewer downloads log files from the display. These can then be viewed and values can be individually selected and scaled.A built-in Can Bus logger makes it possible to take a close look at the log. This can be used to reverse-engineer unknown Can Buses.

Facts:- Plug & Play installation using illustrated installation instructions- Special wiring harness for your vehicle- High-quality electronics “Made In Germany”- Electronic components with product qualification for motor vehicles according to AEC-Q100 installed- Support from us as co-developer and manufacturer Scope of delivery:The scope of delivery includes the motorsport add-on module, an engine-specific wiring harness, illustrated installation instructions in DE/EN and a BYPASS connector, which you can use to restore your vehicle to series production. Compatible vehicles: VehicleVehicle typePowerEngine capacityEngine typeYear of constructionBMW X5 (F95)M Competition460kW / 625hp4395cm³S63 B44 B06.21 - BMW X6 (F96)M Competition460kW / 625hp4395cm³S63 B44 B06.21 - LEGAL INFORMATION: THE INSTALLATION OF ADDITIONAL ELECTRONICS IS A STRUCTURAL MODIFICATION TO THE MANUFACTURER'S ELECTRONICS. WITHOUT REGISTRATION IN THE VEHICLE DOCUMENTS BY MEANS OF AN INDIVIDUAL CERTIFICATE FROM TÜV; DEKRA OR OTHER RECOGNIZED TESTING INSTITUTES, THE INSTALLATION WILL INVALIDATE THE OPERATING LICENSE. IF USED ON PUBLIC ROADS, THIS WILL RESULT IN THE LOSS OF INSURANCE COVER. WE DO NOT CURRENTLY HAVE A PARTS CERTIFICATE FOR YOUR VEHICLE. THEREFORE, THIS SYSTEM IS EXCLUSIVELY SUITABLE FOR MOTORSPORT. ATTENTION: IF YOU USE THE ADDITIONAL ELECTRONICS, YOU MAY LOSE YOUR WARRANTY CLAIMS AGAINST THE SELLER OR WARRANTY CLAIMS AGAINST THE MANUFACTURER. IF YOU HAVE ANY FURTHER QUESTIONS, PLEASE DO NOT HESITATE TO CONTACT US!