Mudguard side intakes emblem sticker Carbon | fits BMW M3/M4 (G80/G81/G82/G83) | Aulitzky Tuning

MOVIT DDE steel brake system 380x32mm (6 piston calliper) for the front axle, from 19 inch rims upwardsApplication-focussed development is the cornerstone of this high-performance brake system. The required balance of weight, performance and durability is optimally combined. The uncompromising selection of materials in production results in a highly unique product that meets the diverse requirements of extreme automotive applications. The most important features of the MOVIT brake system are- The progressive staggering of the piston diameters, matched to the vehicle, so that precisely parallel contact pressure between the pad and the disc is guaranteed. This enables even wear of the brake pads and ensures even heat transfer and a reduced system temperature.- Very good heat dissipation due to the open design of the brake pad contour.- Calipers manufactured from high-strength, highly tempered aircraft aluminium 7075 with high-quality material properties (stiffer components, more homogeneous structure), hard anodised and coated with a triple layer of paint.- Optimised stability due to the length of the callipers- Larger brake disc diameter and thickness, more cross holes (each pre-cast hole is re-drilled and countersunk, which has a favourable effect on the flow).- The brake discs are thermally tempered.- The optimised DDE ventilation system (double directional evolvent system) of the brake disc has an 80% larger surface area compared to other brake discs, the temperature of the brake disc is significantly reduced and therefore also the wear.- Long service life of the wearing parts, excellent response behaviour, steel flex lines ensure consistent performance.- Optimally matched brake pads ensure fading resistance, a long service life and reduced wear on spare parts Attention: The conversion means that only rims with at least 19 inches can be fitted! The chassis number of the vehicle on which the brakes are fitted is required for the parts certificate. MOVIT sports brake callipers, 6-piston- Milled from high-strength aircraft aluminium 7075- Two-piece- Use of maximum disc size due to long design- Significantly improved rigidity and extended contact surface of the pad- Uniform heat transfer- Reduced system temperature- Low, even pad wear- Progressive piston staggering- Crown system for fixing the brake hose- RAPAD-X system for quick brake pad replacement without removing the caliper from the bracket- Open brake pad track for optimised cooling- Maximum stability- Maximum braking force MOVIT sports brake discs, 380x32mm, 2-piece- Highly efficient DDE cooling system- Perforated for optimum response behaviour even on wet roads- Highest fading resistance- Special alloy for high thermal conductivity MOVIT comfort brake pads- Enlarged friction surface- Lower system temperature- Uniform heat transfer- Longer service life Scope of delivery:2x MOVIT brake caliper (left/right)2x MOVIT brake disc (left/right)2x vehicle-specific brake caliper adapter1x set of comfort brake pads2x steel flex lines1x assembly material1x installation instructions and running-in instructions1x parts certificate Compatible vehicles:BMW 5 Series (E60) M5 373kW / 507PS / 4999cm³ / S85BMW 6 Series (E63) M6 373kW / 507PS / 4999cm³ / S85

Protect your vehicle's factory oil cooler with the first-class full replacement oil cooler protector made of high-quality carbon fibre. Your vehicle's oil cooler is located directly under the front bumper and is therefore particularly susceptible to damage from bumps in the road. Unlike the standard plastic protectors, which can easily crack and break, this product provides reliable protection for your oil cooler, helping to extend the life of your engine and prevent serious damage to the S58 engine. The durable aluminium protection is designed to reliably fend off scratches and dirt, while hardly affecting the overall weight of your vehicle. Invest in the protection of your engine and extend the life of your vehicle with the full replacement oil cooler guard. When you buy Pre-Preg carbon fibre, you are investing in a higher quality and more durable material that will outlast other forms of carbon fibre and potentially save you money in the long run. Details:- Replaces the OEM plastic guard- Fitment guarantee Scope of delivery:- 1x oil cooler guard including all necessary hardware Compatible vehicles:- BMW G87 M2 - BMW G80 M3 incl. Competition Saloon (2021+)- BMW G81 M3 incl. Competition Touring (2023+)- BMW G82 M4 incl. Competition Coupé (2021+)- BMW G83 M4 incl. Competition Convertible (2021+) Note: This is NOT an original BMW product!

KW V5 Clubsport coilover suspension incl. support bearings The new 4-way adjustable KW V5 Clubsport offers the latest KW Solid Piston GT3 motorsport suspension technology for the sportiest road cars with sports tyre setup for use on the race track and on the road. The entire suspension design of the KW V5 Clubsport coilover suspension with its unibal bearings is designed for the use of semi-slick tyres on close-to-production vehicles. KW Solid Piston Technology for the race track and road In contrast to vibration dampers with overflowed working pistons, KW uses its KW Solid Piston Technology (displacement piston design), which is proven in motorsport and homologated for vehicles such as the BMW M4 GT3 and Porsche 911 GT3 R, in the KW V5 Clubsport coilover suspension. The compression and rebound valves, which can be adjusted separately in the low-speed and high-speed forces, are arranged separately from the damper inner tube and the piston rod. As a result, the KW V5 Clubsport with adjustable KW SPCLH-A (KW Solid Piston Compression Low- and Highspeed Adjustable) compression damping and the KW SPRLH-A (KW Solid Piston Rebound Low- and Highspeed Adjustable) rebound damping offers significant added value. - More sensitive and high-frequency damping - Cavitation-free function - Low-pressure gas range from 6 to 10 bar - Unique, independently acting damper force adjustment - Freely adjustable compression and rebound damping technology - Adjustable low-speed compression damping with 13 exact clicks - Adjustable high-speed compression damping with 13 exact clicks - Adjustable low-speed rebound damping with 13 exact clicks - Adjustable high-speed rebound damping with 13 exact clicks - Stepless lowering - tested adjustment range - Aluminium Unibal support bearing - parts certificate - High-quality components for a long service life The bodywork remains perfectly supported during aggressive steering manoeuvres and extreme compression. Thanks to the adjustable multi-valve technology, the KW V5 Clubsport dampens bumps and relatively large transverse joints cleanly. Even when hitting curbs, near-series sports cars remain safely controllable with the KW V5 Clubsport coilover suspension. The height adjustment options allow the wheel loads to be adapted. The adjustment options, combined with the damping technology (SPCLH-A and SPRLH-A technology), which can be adjusted separately in compression and rebound, enable individual setups to suit the vehicle weight, tyre characteristics, different track conditions and operating conditions - thanks to multi-valve technology and parts certificates, the KW V5 Clubsport coilover suspension can also be used on public roads. Setup: Application range and damper tuning The KW V5 Clubsport coilover suspension with its KW Solid Piston Technology is the ideal upgrade to drive near-series sports cars safely and quickly with semi-slick tyres on trackdays and tourist drives on race tracks. Thanks to the parts certificate, the KW V5 Clubsport can also be used in everyday life on public roads. Please note the conditions and instructions for this product: - VA + HA height-adjustable (coilover struts) - For vehicles with electronic damper control, this must be deactivated. Vehicle-specific KW decommissioning kits can be found in the accessories table. - The dampers have easy-to-operate adjustment wheels. Due to the design, the rebound stage can only be adjusted when the piston rod is accessible. - Aluminium struts (no Inox-line) - Not for vehicles with standard lift system Technical information: Lowering VA/HA (mm): 20-40/20-40 Version: V5 Clubsport Height adjustment: Rebound and compression damping Material: Aluminium Adjustment VA/HA: thread/thread Approval: Parts certificate (§19.3) Compatible vehicles: Manufacturer Model Version Body Fuel Performance Displacement Cylinder Drive CHEVROLET CORVETTE (C8) 07/2019- 6.2 Coupe Petrol 354 KW 6162 ccm 8 Rear wheel drive CHEVROLET CORVETTE (C8) 07/2019- 6.2 Coupe Petrol 365 KW 6162 ccm 8 Rear wheel drive CHEVROLET CORVETTE (C8) 07/2019- 6.2 Coupe Petrol 369 KW 6162 ccm 8 Rear-wheel drive

Function:- variable flap control of the original or retrofitted flap exhaust system- controllable via steering wheel buttons Compatible vehicles: VehicleTypePowerEngine capacityEngine typeYear of constructionBMW 3er (F30/F31/F34)340i / xDrive240kW / 326hp2979cm³B58 B30 A07.15 - BMW 3er (F30/F31/F34)340i / xDrive265kW / 360hp2979cm³B58 B30 A07.15 - BMW 4er (F32/F33/F36)440i / xDrive240kW / 326hp2979cm³B58 B30 A03.16 - 05.21 BMW 4er (F32/F33/F36)440i / xDrive265kW / 360hp2979cm³B58 B30 A03.16 - 05.21 Note: This product is NOT StVZO approved and NOT intended for sale within the EU! This item is for show & motorsport purposes only and must not be used/installed on public roads. If the component is installed on/in the vehicle, the operating license expires! The pictures shown are examples.

Facts: Material: Carbon Manufacturer: Eventuri Parts certificate: without A legendary add-on for a legendary car! Our E9X carbon ducts are a direct replacement for the OEM plastic ducts to add the finishing touches to the engine bay. These ducts are made from prepreg carbon and match the rest of our E9X range for the ultimate OEM+ theme. We have also replaced the flexible connector between the ducts and the airbox with an EPDM coupling with our raised V logo. During development we considered adding air scoops to the front duct, but after analysis we realised that there was no performance benefit due to the small opening between the ducts and the airbox, so we decided not to add air scoops. This also leaves the grill openings clear for optimum flow to the radiator. The Eventuri carbon ducts are available in both gloss and matte finishes to match our plenum, intake and airbox lid. Each set consists of: Carbon fibre front duct Carbon fibre rear duct Customised EPDM coupler Compatible vehicles: VehicleVehicle typePowerEngine capacityEngine typeYear of constructionBMW 3 Series (E90/E92/E93)M3309kW / 420hp3999cm³S65 B40 A06.07 - 06.13