KW V2 coilover suspension comfort | fits BMW 3/4 Series xDrive (F30/F32) | 1802000S | 1802000U

From €1,713.60*

Delivery time: Availability on request at Aulitzky Tuning*

Does the vehicle have electronic damper control?

YES

Optional: Installation on site at Aulitzky Tuning

- Installation and removal of coilover suspension
- Wheel camber correction kit
- Wheel alignment
- Calibration of assistance systems/lights
- Individual suspension tuning according to customer requirements
- Individual test drive and adjustment together with the customer

Assembly at location DE-91564 Neuendettelsau

Reset choice

€0.00*

Finanzieren Sie ihren Einkauf über die Targobank.

Product number: KW1802000SU

Product information "KW V2 coilover suspension comfort | fits BMW 3/4 Series xDrive (F30/F32) | 1802000S | 1802000U"

KW V2 Comfort coilover suspension

The KW V2 Comfort coilover suspension focuses on your comfort-oriented driving pleasure.
If your standard sports suspension is too harsh for you as a frequent driver or as a family, or if even the suspension comfort of your installed accessory lowering springs is too unharmonious in the long run, the KW V2 Comfort sports suspension is the ideal solution for more driving comfort. It combines a subtle lowering in the vehicle-specific adjustment range of ten to 40 millimeters with a comfort-oriented damper tuning developed by KW test engineers on numerous test drives in everyday life and on the KW 7-Post driving dynamics test bench.

Suspension too hard? KW V2 Comfort is the answer
Whether on long stretches on the highway or many kilometers on fast country roads, with the KW V2 Comfort coilover suspension you enjoy a comfortable setup. The shorter KW damper housings allow a comfortable residual spring travel despite the lowering. With the KW V2 Comfort coilover suspension, the dampers, housings, springs and the comfort-oriented damper characteristics are perfectly matched to each other. In addition, the KW V2 Comfort coilover suspension allows you to further adjust the rebound damping individually to your driving style and your comfort level.

Adjustable comfort - "no more hard times"
With the KW V2 Comfort coilover suspension, you can also influence the handling and comfort yourself with the individually adjustable rebound adjustment. With the 16 exact clicks, you can adjust the KW dampers to be more comfortable or firmer, without affecting the bottom valve of the compression stage. By increasing the rebound force via the adjustment wheel, the body movements on the body are reduced. As a result, your car tracks better and you have even more stability at higher cornering speeds. If, for example, you change from the approved wheel/tyre combinations of your car manufacturer to larger rims, you can use the adjustable rebound to perfectly match the handling of your car and your new alloy wheels. Or you can reduce the rebound to even more comfort with just a few clicks - just as you have always wanted from a sports suspension.

Stepless lowering from ten to 40 millimetres
The KW V2 Comfort coilover suspension, manufactured using "inox-line" stainless steel technology, allows vehicle-specific lowering in a tested adjustment range of ten to 40 millimetres. As a result, you no longer have to be satisfied with a fixed lowering as with a conventional spring kit. Thanks to the filigree workmanship and the use of high-quality components, the KW V2 Comfort coilover struts made of stainless steel are 100 percent corrosion-resistant and have an unlimited service life.
The functionality of the stepless lowering in conjunction with the dirt-resistant trapezoidal thread and the polyamide threaded ring is not impaired even after years of use. The individual lowering system with its infinitely variable adjustment range also allows you to visually emphasize the sportiness of your vehicle.

-Stainless steel technology "inox-line"
-decent lowering
-Tested adjustment range
-high-quality components for a long service life
Comfort-oriented damper tuning
-adjustable rebound damping

Setup - Adjustable rebound damping with 16 clicks.
The KW V2 Comfort coilover suspension focuses on your comfort-oriented driving pleasure. That's why our test engineers were on the road for you on numerous highways, country roads and bad roads. The KW V2 Comfort coilover suspension is suitable for all frequent drivers and families who want to combine the pleasure of a subtle lowering with driving comfort.

Please note the conditions and instructions for this product:
- VA + HA height-adjustable (VA coilover struts, HA springs with height adjustment + damper)
- For vehicles with electronic damper control, this must be deactivated.

Technical information:
Product line: Street Comfort
Lowering VA/HA (mm): 15-45/20-50
Version: V2 Comfort
Hardness adjustment: Rebound
Material: Stainless steel
Adjustment VA/HA: Thread/thread
Approval: Parts certificate (§19.3)

Compatible vehicles:
Manufacturer Model Version Body Fuel Performance Displacement Cylinder Drive
BMW 3 Series (F30, F80) 3-HY, 3L, M3, M3 GTS 11/2011-10/2018 320 d xDrive notchback diesel 120 KW 1995 ccm 4 all-wheel drive
BMW 3 Series (F30, F80) 3-HY, 3L, M3, M3 GTS 11/2011-10/2018 320 d xDrive notchback diesel 140 KW 1995 ccm 4 all-wheel drive
BMW 3 Series (F30, F80) 3-HY, 3L, M3, M3 GTS 11/2011-10/2018 320 i xDrive notchback petrol 134 KW 1997 ccm 4 all-wheel drive
BMW 3 Series (F30, F80) 3-HY, 3L, M3, M3 GTS 11/2011-10/2018 320 i xDrive notchback petrol 135 KW 1997 ccm 4 all-wheel drive
BMW 3 Series (F30, F80) 3-HY, 3L, M3, M3 GTS 11/2011-10/2018 320 i xDrive notchback petrol 135 KW 1998 ccm 4 all-wheel drive
BMW 3 Series (F30, F80) 3-HY, 3L, M3, M3 GTS 11/2011-10/2018 328 i xDrive notchback petrol 179 KW 1997 ccm 4 all-wheel drive
BMW 3 Series (F30, F80) 3-HY, 3L, M3, M3 GTS 11/2011-10/2018 330 d xDrive notchback diesel 190 KW 2993 ccm 6 all-wheel drive
BMW 3 Series (F30, F80) 3-HY, 3L, M3, M3 GTS 11/2011-10/2018 330 d xDrive notchback diesel 210 KW 2993 ccm 6 all-wheel drive
BMW 3 Series (F30, F80) 3-HY, 3L, M3, M3 GTS 11/2011-10/2018 330 i xDrive notchback petrol 185 KW 1998 ccm 4 all-wheel drive
BMW 3 Series (F30, F80) 3-HY, 3L, M3, M3 GTS 11/2011-10/2018 335 d xDrive notchback diesel 230 KW 2993 ccm 6 All-wheel drive
BMW 3 Series (F30, F80) 3-HY, 3L, M3, M3 GTS 11/2011-10/2018 335 i xDrive notchback petrol 225 KW 2979 ccm 6 All-wheel drive
BMW 3 Series (F30, F80) 3-HY, 3L, M3, M3 GTS 11/2011-10/2018 335 i xDrive notchback petrol 240 KW 2979 ccm 6 all-wheel drive
BMW 3 Series (F30, F80) 3-HY, 3L, M3, M3 GTS 11/2011-10/2018 335 i xDrive notchback petrol 250 KW 2979 ccm 6 all-wheel drive
BMW 3 Series (F30, F80) 3-HY, 3L, M3, M3 GTS 11/2011-10/2018 340 i xDrive notchback petrol 240 KW 2998 ccm 6 all-wheel drive
BMW 3 Series (F30, F80) 3-HY, 3L, M3, M3 GTS 11/2011-10/2018 340 i xDrive notchback petrol 265 KW 2998 ccm 6 all-wheel drive
BMW 4 Series Coupe (F32, F82) 3C, M3, M3 GTS 07/2013-06/2020 420 d xDrive Coupe Diesel 120 KW 1995 ccm 4 all-wheel drive
BMW 4 Series Coupe (F32, F82) 3C, M3, M3 GTS 07/2013-06/2020 420 d xDrive Coupe Diesel 140 KW 1995 ccm 4 all-wheel drive
BMW 4 Series Coupe (F32, F82) 3C, M3, M3 GTS 07/2013-06/2020 430 d xDrive Coupe Diesel 190 KW 2993 ccm 6 All-wheel drive
BMW 4 Series Coupe (F32, F82) 3C, M3, M3 GTS 07/2013-06/2020 430 d xDrive Coupe Diesel 210 KW 2993 ccm 6 All-wheel drive
BMW 4 Series Coupe (F32, F82) 3C, M3, M3 GTS 07/2013-06/2020 430 i xDrive Coupe Petrol 183 KW 1998 ccm 4 All-wheel drive
BMW 4 Series Coupe (F32, F82) 3C, M3, M3 GTS 07/2013-06/2020 435 d xDrive Coupe Diesel 230 KW 2993 ccm 6 All-wheel drive
BMW 4 Series Coupe (F32, F82) 3C, M3, M3 GTS 07/2013-06/2020 435 i xDrive Coupe Petrol 225 KW 2979 ccm 6 All-wheel drive
BMW 4 Series Coupe (F32, F82) 3C, M3, M3 GTS 07/2013-06/2020 435 i xDrive Coupe Petrol 250 KW 2979 ccm 6 All-wheel drive
BMW 4 Series Coupe (F32, F82) 3C, M3, M3 GTS 07/2013-06/2020 440 i xDrive Coupe Petrol 240 KW 2998 ccm 6 All-wheel drive
BMW 4 Series Coupe (F32, F82) 3C, M3, M3 GTS 07/2013-06/2020 440 i xDrive Coupe Petrol 265 KW 2998 ccm 6 All-wheel drive

Please enter a valid email address.

Your question *

Please enter a valid question.

I agree that my data will be processed to answer the question. I have taken note of the Privacy Policy and agree to the information described therein.*

To continue, enter the characters shown above*

Fields marked with * are mandatory.

There aren't any asked questions yet.

Zuletzt gesehene Produkte

Engine cover large Carbon | fits BMW M2/M3/M4 incl. Competition (G80/G81/G82/G83/G87) | Aulitzky Tuning

Our high-quality and large engine cover made of pre-preg carbon fibre is a great addition to enhance the style of your vehicle. The carbon fibre engine cover replaces the standard plastic part. When you buy Pre-Preg carbon fibre, you are investing in a higher quality and more durable material that will outlast other forms of carbon fibre and potentially save you money in the long run. Installation: Plug&Play Details:- 100% carbon fibre construction- High gloss finish- Performance style design- Supplied with 3M double-sided adhesive tape already attached- Use rubber adapter from the original engine cover + emblem- registration free Compatible vehicles with S58 engine:- BMW G87 M2 - BMW G80 M3 Sedan (2021+)- BMW G80 M3 Competition Sedan (2021+)- BMW G81 M3 Touring (2023+)- BMW G81 M3 Competition Touring (2023+)- BMW G82 M4 Coupé (2021+)- BMW G82 M4 Competition Coupé (2021+)- BMW G83 M4 Convertible (2021+)- BMW G83 M4 Competition Convertible (2021+) Note: This is NOT an original BMW product!

€1,149.00*

Centre console side cover carbon | fits BMW M2/M3/M4 incl. Competition (G80/G81/G82/G83/G87) | Aulitzky Tuning

The side centre consoles give your vehicle an upscale look and feel. When you buy Pre-Preg carbon fibre, you are investing in a higher quality and more durable material that will outlast other forms of carbon fibre and potentially save you money in the long run. Details:- 100% carbon fibre construction- High gloss finish- Fit guarantee- registration free Scope of delivery:1x set of centre console side covers (1x right / 1x left) Compatible vehicles:- BMW G87 M2 - BMW G80 M3 incl. Competition Saloon (2021+)- BMW G81 M3 incl. Competition Touring (2023+)- BMW G82 M4 incl. Competition Coupé (2021+)- BMW G83 M4 incl. Competition Convertible (2021+) Note: This is NOT an original BMW product!

€199.00*

KW V1 coilover suspension inox | fits for Audi RS4 quattro B7 Limo | 10210051

KW V1 coilover suspension Sportiness paired with outstanding looks. With factory pre-configured damping.Our entry-level model for more driving pleasure through an appealing and individually adjustable lowering is the KW V1 coilover suspension in the KW typical "inox-line". Thanks to its high-quality workmanship, the consistent use of stainless steel struts, corrosion-resistant springs and harmonised components, it stands for many years of driving pleasure - and not just for the life of the car. Stepless loweringThe KW V1 enables maximum lowering within the tested adjustment range. This varies depending on the vehicle model and can, for example, be between 30 and 70 millimetres or 50 to 90 millimetres for an individual lowering. Thanks to the dirt-resistant trapezoidal thread and the polyamide threaded ring, the stepless lowering can be varied quickly and easily even years later. Depending on the vehicle, the lowering is carried out either on the wheel-guiding KW stainless steel suspension struts or on the rear axle height adjustment for non-wheel-guiding double-wishbone rear axles. The benchmark for sporty, dynamic tuning fansWith its harmonious basic set-up for sporty driving on the road, the KW V1 convinces the discerning tuning fan. Our development engineers determine a specific damper set-up and spring rate for each vehicle in order to increase your driving pleasure with the optimum balance of sportiness and suitability for everyday use. After all, you are not buying just any coilover suspension, but a KW coilover suspension that has been specially developed and tuned for your vehicle type. As a manufacturer, KW only uses its own resources, high-quality components and the same damper technology as mass-produced manufacturers. With the KW V1, the rolling and rolling movements of the vehicle body are reduced during compression, allowing you to benefit from unadulterated directness and sportier handling when driving. Our experience for your driving pleasureAs a manufacturer of customised suspension solutions for road and racing, we have been the market leader and innovation driver for over 25 years. No matter where in the world, sporty drivers, car manufacturers and tuners rely on our KW coilovers "Made in Germany". Every KW coilover suspension is subjected to extensive load tests during production and is developed and manufactured directly at our company headquarters in Fichtenberg, Swabia, in order to fulfil the high standards of our KW quality management. As a German manufacturer, it is a matter of course for us to provide a multi-year warranty on our KW coilover suspension kits, which exceed OEM quality and cover over 4,600 applications. When installed by one of our KW specialist dealers, this warranty is valid for up to five years. - Optimally adjusted in advance- sporty and harmonious damping technology- Stainless steel technology "inox-line"- Individually height-adjustable- Tested adjustment range- Ready-to-install complete solution- High-quality components for a long service life- Complete documentation for easy handling Setup - factory pre-configured damping setupThe KW V1 has a vehicle-specific, permanently configured damper setup. The spring and the damper are perfectly matched to each other so that you experience an optimum balance of sportiness and suitability for everyday use when driving. Even with a full payload and maximum axle loads, the dampers always work with a sporty characteristic curve. The KW V1 is particularly interesting for tuning enthusiasts who prioritise the show & shine concept. Please note the conditions and instructions for this product: - VA + HA height adjustable (VA coilover struts, HA springs with height adjustment + damper) - With variant 2 or variant 3, hardness adjustment also possible on the VA only when removed! Technical information: Lowering VA/HA (mm): 15-45/10-30 Version: V1 Hardness adjustment: none Material: stainless steel Adjustment VA/HA: thread/thread Approval: parts certificate (§19.3) Compatible vehicles: Manufacturer Model Version Body Fuel Performance Displacement Cylinder Drive AUDI A4 (8E) 8EC, QB6, B7 11/2004-06/2008 RS4 quattro notchback Petrol 309 KW 4163 ccm 8 All-wheel drive

€1,466.08*

Turbo pipe Carbon for intake system | fits Mercedes-Benz A250/A35 AMG (177), CLA250/CLA35 AMG (118) | Eventuri

FITS ONLY THE EVENTURI INLET SYSTEM: Mercedes A35 AMG, CLA35 AMG, A250, CLA250 | 177, 118 The Mercedes A35 Eventuri turbo pipe was developed to offer the turbo a less restrictive flow path compared to the standard pipe. We have succeeded in increasing the internal volume and eliminating the corrugated, flexible section on the airbox side. By using a completely solid pipe all the way from the intake tract to the turbo, the flow path is smoother and the airflow can remain more laminar. To accommodate the movement of the engine, our A35 intake has a "floating" pipe that can move within the airbox. The shape of the carbon tube on the turbo side has been optimised using CFD to minimise turbulence. The connection to the turbo is achieved by an innovative silicone coupling, which has an internal thermal separator between the carbon pipe and the metal turbo housing. The multiple vent ports at the rear of the pipe are done with a CNC machined block that also provides a smooth internal surface for airflow within the pipe. The Eventuri A35-A250 turbo inlet pipe is made from prepreg carbon fibre and comes with a range of other components designed for a specific purpose and manufactured to the highest standards. It is available to fit the A35, CLA35 and A250. The inlet pipe is only suitable for our intake system. Each intake system consists of: Prepreg carbon pipe CNC-milled breather block CNC-milled MAP boss CNC-milled breather nozzle CNC-milled reinforcement ring Laser-cut bracket Silicone couplings with oil-resistant lining Marine grade stainless steel hose clamps Compatible vehicles:VehicleTypePowerEngine capacityEngine typeYear of construction Mercedes A-Class (W177/V177)A250 / 4-matic165kW / 224hp1991cm³M 260.92003.18 - Mercedes A-Class (W177/V177)A35 AMG 4-matic225kW / 306hp1991cm³M 260.92009.18 - Mercedes CLA (C118/X118)A250 / 4-matic165kW / 224hp1991cm³M 260.92003.19 - Mercedes CLA (C118/X118)CLA35 AMG 4-matic225kW / 306hp1991cm³M 260.92004.19 -

€898.00*

KW V1 coilover suspension inox | fits Audi RS4 quattro B7 Avant/Cabrio | 10210061

KW V1 coilover suspension Sportiness paired with outstanding looks. With factory pre-configured damping.Our entry-level model for more driving pleasure through an appealing and individually adjustable lowering is the KW V1 coilover suspension in the KW typical "inox-line". Thanks to its high-quality workmanship, the consistent use of stainless steel struts, corrosion-resistant springs and harmonised components, it stands for many years of driving pleasure - and not just for the life of the car. Stepless loweringThe KW V1 enables maximum lowering within the tested adjustment range. This varies depending on the vehicle model and can, for example, be between 30 and 70 millimetres or 50 to 90 millimetres for an individual lowering. Thanks to the dirt-resistant trapezoidal thread and the polyamide threaded ring, the stepless lowering can be varied quickly and easily even years later. Depending on the vehicle, the lowering is carried out either on the wheel-guiding KW stainless steel suspension struts or on the rear axle height adjustment for non-wheel-guiding double-wishbone rear axles. The benchmark for sporty, dynamic tuning fansWith its harmonious basic set-up for sporty driving on the road, the KW V1 convinces the discerning tuning fan. Our development engineers determine a specific damper set-up and spring rate for each vehicle in order to increase your driving pleasure with the optimum balance of sportiness and suitability for everyday use. After all, you are not buying just any coilover suspension, but a KW coilover suspension that has been specially developed and tuned for your vehicle type. As a manufacturer, KW only uses its own resources, high-quality components and the same damper technology as mass-produced manufacturers. With the KW V1, the rolling and rolling movements of the vehicle body are reduced during compression, allowing you to benefit from unadulterated directness and sportier handling when driving. Our experience for your driving pleasureAs a manufacturer of customised suspension solutions for road and racing, we have been the market leader and innovation driver for over 25 years. No matter where in the world, sporty drivers, car manufacturers and tuners rely on our KW coilovers "Made in Germany". Every KW coilover suspension is subjected to extensive load tests during production and is developed and manufactured directly at our company headquarters in Fichtenberg, Swabia, in order to fulfil the high standards of our KW quality management. As a German manufacturer, it is a matter of course for us to provide a multi-year warranty on our KW coilover suspension kits, which exceed OEM quality and cover over 4,600 applications. When installed by one of our KW specialist dealers, this warranty is valid for up to five years. - Optimally adjusted in advance- sporty and harmonious damping technology- Stainless steel technology "inox-line"- Individually height-adjustable- Tested adjustment range- Ready-to-install complete solution- High-quality components for a long service life- Complete documentation for easy handling Setup - factory pre-configured damping setupThe KW V1 has a vehicle-specific, permanently configured damper setup. The spring and the damper are perfectly matched to each other so that you experience an optimum balance of sportiness and suitability for everyday use when driving. Even with a full payload and maximum axle loads, the dampers always work with a sporty characteristic curve. The KW V1 is particularly interesting for tuning enthusiasts who prioritise the show & shine concept. Please note the conditions and instructions for this product: - VA + HA height-adjustable (VA coilover struts, HA springs with height adjustment + damper) - With variant 2 or variant 3, hardness adjustment also possible on the VA only when removed! Technical information: Lowering VA/HA (mm): 15-45/10-30 Version: V1 Hardness adjustment: none Material: stainless steel Adjustment VA/HA: thread/thread Approval: parts certificate (§19.3) Compatible vehicles: Manufacturer Model Version Body Fuel Performance Displacement Cylinder Drive AUDI A4 Avant (8E) 8ED, QB6, B7 11/2004-06/2008 RS4 quattro station wagon Petrol 309 KW 4163 ccm 8 All-wheel drive AUDI A4 B7 Cabriolet (8HE) 01/2002-12/2009 RS4 quattro Cabriolet Petrol 309 KW 4163 ccm 8 All-wheel drive

€1,466.08*

KW V2 coilover suspension comfort | fits BMW 3/4 Series xDrive (F30/F32) | 1802000S | 1802000U

Ratenrechner

Ask a question

Previously asked questions