Intake system Carbon | fits BMW M3 (E90/E92/E93) 420hp S65 | Eventuri

€1,033.00*

Prices incl. VAT plus shipping costs

place a request

Finanzieren Sie ihren Einkauf über die Targobank.

Product number: EV10037

Product information "Intake system Carbon | fits BMW M3 (E90/E92/E93) 420hp S65 | Eventuri"

Facts:
Performance increase: +8-10 hp, +10-12 Nm
Material: Carbon
Manufacturer: Eventuri
Parts certificate: A certificate is available for this product for certain regions and vehicles (details below)

A legendary add-on for a legendary car!

Extensive studies of the original, very well developed Intake have paid off in the design of the intake system from Eventuri, because in the end an improvement could still be achieved. The new intake system for the E90, E92 and E93 guarantees a noticeable increase in performance thanks to a frictionless air flow in the new, one-piece intake manifold.
In contrast to many other Eventuri intake systems, only the filter, the intake pipe and the intake scoop need to be replaced. In addition to easier installation, this is reflected above all in the price. The new scoop directs the airflow in such a way that the high pressure can be used without frictional losses due to the position of the air intake directly under the headlights. The resulting significantly cooler and faster airflow leads to a clear optimization of the overall airflow.
In repeated tests, these small optimizations allow an increase in performance of between 8 and 10 hp and 10 - 12 Nm more!

The intake system is supplied with:
Efficient high flow cone with urethane filter
Carbon scoop
Inlet pipe made of full carbon
Laser-cut debris shield
Laser-cut suspension

Parts certificate
The manufacturer's specifications apply for installation. An existing certificate is no guarantee that the product can also be installed in the corresponding vehicle.

A certificate is available for this product for the following regions and vehicles:
* DE/AT: Vehicle registration document, field K --- CH/LI: Vehicle registration document, field 24
Country model type approval*
DE/AT BMW E90 M3 e1*2007/46*0377*..
DE/AT BMW E92 M3 e1*2007/46*0377*..
DE/AT BMW E93 M3 e1*2007/46*0377*..
DE/AT BMW GTS e1*KS07/46*0012*..
DE/AT BMW M3 e1*2001/116*0345*..
CH/LI BMW M3 1BB471
CH/LI BMW M3 1BB570
CH/LI BMW M3 1BB607
CH/LI BMW M3 1BB669
CH/LI BMW M3 1BB955-1BB957
CH/LI BMW M3 1BC611-1BC612

Compatible vehicles:

Vehicle	Vehicle type	Power	Engine capacity	Engine type	Year of construction
BMW 3er E90/E92/E93)	M3	309kW / 420hp	3999cm³	S65 B40 A	06.07 - 06.13

Please enter a valid email address.

Your question *

Please enter a valid question.

I agree that my data will be processed to answer the question. I have taken note of the Privacy Policy and agree to the information described therein.*

To continue, enter the characters shown above*

Fields marked with * are mandatory.

There aren't any asked questions yet.

Air filter cover Carbon | fits BMW M3 (E90/E92/E93) 420hp S65 | Eventuri

Variant: Carbon glossy

Facts: Material: Carbon Manufacturer: Eventuri Parts certificate: A certificate is available for this product for certain regions and vehicles (details below) Parts certificate The manufacturer's specifications apply for installation. The availability of a certificate is no guarantee that the product can be installed in the corresponding vehicle. A certificate is available for this product for the following regions and vehicles: * DE/AT: Vehicle registration document, field K --- CH/LI: Vehicle licence, field 24 Country model type approval* DE/AT BMW E90 M3 e1*2007/46*0377*.. DE/AT BMW E92 M3 e1*2007/46*0377*.. DE/AT BMW E93 M3 e1*2007/46*0377*.. DE/AT BMW GTS e1*KS07/46*0012*.. DE/AT BMW M3 e1*2001/116*0345*.. CH/LI BMW M3 1BB471 CH/LI BMW M3 1BB570 CH/LI BMW M3 1BB607 CH/LI BMW M3 1BB669 CH/LI BMW M3 1BB955-1BB957 CH/LI BMW M3 1BC611-1BC612 Compatible vehicles: VehicleVehicle typePowerEngine capacityEngine typeYear of constructionBMW 3 Series (E90/E92/E93)M3309kW / 420hp3999cm³S65 B40 A06.07 - 06.13

€728.00*

Ducts air duct Carbon | fits BMW M3 (E90/E92/E93) 420hp S65 | Eventuri

Variant: Carbon glossy

Facts: Material: Carbon Manufacturer: Eventuri Parts certificate: without A legendary add-on for a legendary car! Our E9X carbon ducts are a direct replacement for the OEM plastic ducts to add the finishing touches to the engine bay. These ducts are made from prepreg carbon and match the rest of our E9X range for the ultimate OEM+ theme. We have also replaced the flexible connector between the ducts and the airbox with an EPDM coupling with our raised V logo. During development we considered adding air scoops to the front duct, but after analysis we realised that there was no performance benefit due to the small opening between the ducts and the airbox, so we decided not to add air scoops. This also leaves the grill openings clear for optimum flow to the radiator. The Eventuri carbon ducts are available in both gloss and matte finishes to match our plenum, intake and airbox lid. Each set consists of: Carbon fibre front duct Carbon fibre rear duct Customised EPDM coupler Compatible vehicles: VehicleVehicle typePowerEngine capacityEngine typeYear of constructionBMW 3 Series (E90/E92/E93)M3309kW / 420hp3999cm³S65 B40 A06.07 - 06.13

€994.00*

Air collector Carbon | fits BMW M3 (E90/E92/E93) 420hp S65 | Eventuri

Facts:Material: CarbonManufacturer: EventuriParts certificate: A certificate is available for this product for certain regions and vehicles (details below) Introducing our E9X carbon fiber air collector. Made from 100% high quality prepreg carbon including the inner trumpets, this air collector replaces the stock plastic version and unleashes the roar of the naturally aspirated V8 engine.As the trumpet lengths are tuned to the inner volume, changing this setting can result in a loss of power, so we have kept the same volume so as not to affect the way the car drives in terms of power delivery. Although there is no performance gain from the carbon plenum, the intake noise produced takes the driving experience to a whole new level. We went through several iterations with different material thicknesses to fine tune the sound, and the resulting plenum produces an almost unbelievable intake sound! This plenum can be used with the OEM airbox or any other aftermarket intake system, including our own Eventuri intake systems for a real performance boost. Parts certificateThe manufacturer's specifications apply to installation. An existing certificate is no guarantee that the product can also be installed in the corresponding vehicle. A certificate is available for this product for the following regions and vehicles:* DE/AT: Vehicle registration document, field K --- CH/LI: Vehicle registration document, field 24Country model type approval*DE/AT BMW E90 M3 e1*2007/46*0377*..DE/AT BMW E92 M3 e1*2007/46*0377*..DE/AT BMW E93 M3 e1*2007/46*0377*..DE/AT BMW GTS e1*KS07/46*0012*..DE/AT BMW M3 e1*2001/116*0345*.. Compatible vehicles:VehicleVehicle typePowerEngine capacityEngine typeYear of construction BMW 3er (E90/E92/E93)M3309kW / 420hp3999cm³S65 B40 A06.07 - 06.13

€2,723.00*

Intake system Carbon | fits BMW M3 (E90/E92/E93) 420hp S65 | Eventuri

Ratenrechner

Ask a question

Previously asked questions