Frontspoiler Performance Carbon | fits BMW M2 incl. Competition/CS (F87) N55/S55 | Aulitzky Tuning

Facts:- Plug & Play installation using illustrated installation instructions- Special wiring harness for your vehicle- High-quality electronics “Made In Germany”- Electronic components with product qualification for motor vehicles according to AEC-Q100 installed- Support from us as co-developer and manufacturer Scope of delivery:The scope of delivery includes the motorsport add-on module, an engine-specific wiring harness, illustrated installation instructions in DE/EN and a BYPASS connector, which you can use to restore your vehicle to series production. Compatible vehicles: VehicleVehicle typePowerEngine capacityEngine typeYear of constructionBMW 5er (G90/G99)M5535kW / 727hp4395cm³S68 B44 A07.24 - LEGAL INFORMATION: THE INSTALLATION OF ADDITIONAL ELECTRONICS IS A STRUCTURAL MODIFICATION TO THE MANUFACTURER'S ELECTRONICS. WITHOUT REGISTRATION IN THE VEHICLE DOCUMENTS BY MEANS OF AN INDIVIDUAL CERTIFICATE FROM TÜV; DEKRA OR OTHER RECOGNIZED TESTING INSTITUTES, THE INSTALLATION WILL INVALIDATE THE OPERATING LICENSE. IF USED ON PUBLIC ROADS, THIS WILL RESULT IN THE LOSS OF INSURANCE COVER. WE DO NOT CURRENTLY HAVE A PARTS CERTIFICATE FOR YOUR VEHICLE. THEREFORE, THIS SYSTEM IS EXCLUSIVELY SUITABLE FOR MOTORSPORT. ATTENTION: IF YOU USE THE ADDITIONAL ELECTRONICS, YOU MAY LOSE YOUR WARRANTY CLAIMS AGAINST THE SELLER OR WARRANTY CLAIMS AGAINST THE MANUFACTURER. IF YOU HAVE ANY FURTHER QUESTIONS, PLEASE DO NOT HESITATE TO CONTACT US!

3DDesign carbon spoiler for 8 Series F93 and G16 Compatible vehicles:BMW 8 Gran Coupe (G16, F93) M8 Since 2019BMW 8 Gran Coupe (G16, F93) M8 Competition since 2019

Overview:- 15-20°C cooler intake temperatures- 4.5" thick bar and plate core- Wind tunnel optimised core- Aerospace grade thermal dispersion coating- Utilises OEM mounting points and OEM clip settings Testing was performed on a 2017 991.2 Turbo S with GMG Cat-Back Exhaust, IPD Plenum, IPD Y-Pipe & GIAC Stage 1 Tune. During a power sweep test at 27C ambient, the CSF radiator charge temperature is 33°C and the stock radiator charge temperature is 48°C. The CSF 991 Turbo and Turbo-S intercoolers cool 6°C above ambient and 15°C below OEM. Maximum power increase of 41 bhp at the wheel. These coolers utilise all of our expert cooling knowledge to deliver an incredibly powerful intercooler solution at a competitive price. During development, CSF engineers designed and tested several core sizes suitable for this application and then settled on a 4.5" thick, wind tunnel optimised bar and plate core. CSF engineers also used a special aerospace-grade thermal dispersion coating to help the intercooler system disperse heat faster. As always, accuracy of fit is incredibly important. CSF engineers utilise the OEM mounting points, clip adjustments and only require a small amount of trimming of the factory intercooler cover to accommodate the huge intercoolers. Compatible vehicles:PORSCHE 911 (991) 3.8 Turbo 2013-2020PORSCHE 911 (991) 3.8 Turbo 2016-2020PORSCHE 911 (991) 3.8 Turbo S 2013-2020PORSCHE 911 (991) 3.8 Turbo S 2016-2020PORSCHE 911 (991) 3.8 Turbo S 2017-2020PORSCHE 911 Cabriolet (991) 3.8 Turbo 2013-2020PORSCHE 911 Cabriolet (991) 3.8 Turbo 2016-2020PORSCHE 911 Cabriolet (991) 3.8 Turbo S 2013-2020PORSCHE 911 Cabriolet (991) 3.8 Turbo S 2016-2020

Facts: Power increase (RS3 with series turbo): 15-18hp, 19-23ft-lb Power increase (RS3 with hybrid turbo): 25-30hp, 20-24ft-lb Flow dyno data: Standard intake 530 CFM: Eventuri intake 840 CFM Material: Carbon fibre Manufacturer: Eventuri Parts certificate: Approval is available for this product for certain regions and vehicles (details below) Suitable for: F3 RSQ3, RSQ3 Fastback 2019+ Originally developed for the RS3 platform, we now also offer this intake for the RSQ3. This intake system has been developed to provide the highest possible flow rate while allowing the lowest possible intake temperatures. Each component has been designed to provide the turbo with a smooth and clear flow path. The intake tube has an internal diameter of 103mm or just over 4? and has a smooth bend from the filter housing to the turbo inlet. The filter itself has been specifically designed for this inlet and has a huge outer diameter of 210mm or 8.3? with a filter area of over 130,000mm^2. The patented Venturi housing has been designed to provide the maximum possible internal volume for the RSQ3 engine bay and provides laminar flow to the turbo pipe. Finally, the duct seals the filter opening at the windscreen, but is not restricted by the standard intake alone. We have raised the front of the duct to now create an additional opening behind the bonnet, which corresponds to an additional 7? diameter hole from which the intake manifold can be removed. The resulting system has the ability to flow 840 CFM at 28? H2O while keeping intake temperatures to a minimum with the sealed design. The Eventuri difference The F3 RSQ3 Eventuri system uses our patented carbon fibre housings that provide an aerodynamically efficient airflow path from the filter to the turbocharger pipe. Not just another cone filter with a heat shield, but a unique design that creates the Venturi effect. Flow bench tests We conducted flow tests with a Superflow SF-1020 to measure the maximum possible flow rate at a pressure drop of 28" H2O. The tests were performed on the same day under controlled conditions using the same test fixture for each system. We tested our complete intake system against the stock airbox system. The results show how restrictive the stock airbox is, which we were able to improve by up to 58% in maximum possible flow rate. Importantly, this was achieved with a sealed intake system so that intake temperatures are also kept to a minimum. Testing on the test bench Our Stage 3 intake has been tested by various renowned tuners worldwide who have built high performance RS3/TTRS projects for road and track use. The first results come from BR Performance Netherlands, who tested our system on a TTRS with a TTE700 hybrid turbo. The tests were carried out on the same day with the bonnet closed. They tested the stock airbox against our stage 3 intake and also with the addition of our 4" turbo inlet pipe, which is an additional product - details can be found on our Audi product page. Summary of the Dyno results: Standard airbox with modified standard turbo inlet for TTE700 = 576.5 hp Eventuri stage 3 intake with modified standard turbo inlet for TTE700 = 606.5 hp Eventuri stage 3 intake with Eventuri turbo inlet for TTE700 = 620.8 hp Parts certificate The manufacturer's specifications apply for installation. An existing certificate is no guarantee that the product can also be installed in the corresponding vehicle. A certificate is available for this product for the following regions and vehicles: * DE/AT: Vehicle registration document, field K --- CH/LI: Vehicle licence, field 24 Country Model Type approval* DE/AT Audi RS3 e1*xx/xx*0608*06 DE/AT Audi RS3 (8V) from e1*xx/xx*0608*06 DE/AT Audi RS3 (8V) e1*2007/46*0608*08 DE/AT Audi RS3 (8Y) e1*2007/xx*2144*.. DE/AT Audi RSQ3 (F3) e1*xx/xx*2038*.. DE/AT Audi TTRS (8J) e1*xx/xx*1686*.. DE/AT Cupra Formentor VZ5 e9*xx/xx*4008*.. Compatible vehicles:VehicleVehicle typePowerEngine capacityEngine type Audi Q3 (F3) 2019+RSQ3 quattro294kW / 400hp2480cm³DAZA, DNWA

The Wagner Tuning Competition intercooler upgrade kit is suitable for:Porsche Macan 3,0TDI 2014-2018 (155KW/211hp)Porsche Macan 3,0TDI 2014-2018 (184KW/250hp)Porsche Macan 3,0TDI 2014-2018 (190KW/258hp) Experience the ultimate performance boost with the new high-performance intercooler for your Porsche Macan 3.0 TDI. With its impressive features, this intercooler sets new standards in terms of performance and cooling. Discover the benefits of a larger charge air volume and an extended flow area for maximum performance. The high-performance intercooler impresses with its high-quality competition high-performance mesh with internal turbulators. With dimensions of 610 mm x 440 mm x 65 mm and a net volume of 17,446 liters, it offers a 178% larger inflow area and 158% more charge air volume compared to the standard intercooler. Despite its size, this intercooler impresses with a weight of just 9.1 kg. The cast aluminium end boxes were developed using the latest CAD technology and optimized using CFD simulations to ensure the ideal internal airflow. An innovative integrated air guide in the end box ensures even filling of the Competition high-performance mesh. With an enlarged connection diameter of Ø67 mm and reinforced silicone hoses, this kit impresses with minimal back pressure compared to the standard intercooler. The high-performance charge air cooler is equipped with a high-quality anti-corrosion coating that offers excellent heat conduction properties. This ensures permanent and optimum cooling, resulting in a significant increase in performance. Installation of the completely ready-to-fit kit is simple and is carried out by replacing the standard intercooler. This high-performance intercooler has undergone rigorous testing and is pressure-stable up to 6 bar. You can rely on the high quality of our products, which are subject to constant quality monitoring. Whether on the road or on the race track, this intercooler is the perfect choice for your Porsche Macan 3.0 TDI. Discover the unique combination of advanced technology, impressive performance and outstanding cooling effect with the high-performance intercooler for your new Porsche Macan. Increase your driving dynamics and experience the full potential of your vehicle. Advantages of the Wagner Tuning intercooler:- improved cooling performance- 178% larger inflow area- 158% more charge air volume- Enlarged connection diameter Ø67mm- Plug & Play Scope of delivery:1 intercooler1 air duct2 charge air hoses4 hose clamps1 mounting material1 assembly instructionsAttention: Not approved in the area of the StVZO.