KW V2 coilover suspension inox | fits Mini FWD incl. JCW (F56/F65/F66) | 152200AG | 152200AH

From €1,825.46*

Delivery time: Availability on request at Aulitzky Tuning*

Does the vehicle have electronic damper control?

YES

Optional: Installation on site at Aulitzky Tuning

- Installation and removal of coilover suspension
- Wheel camber correction kit
- Wheel alignment
- Calibration of assistance systems/lights
- Individual suspension tuning according to customer requirements
- Individual test drive and adjustment together with the customer

Assembly at location DE-91564 Neuendettelsau

Reset choice

€0.00*

Finanzieren Sie ihren Einkauf über die Targobank.

Product number: KW152200AGH

Product information "KW V2 coilover suspension inox | fits Mini FWD incl. JCW (F56/F65/F66) | 152200AG | 152200AH"

KW V2 coilover suspension

For more stability or driving comfort. With adjustable rebound damping.
Sporty drivers who want more than just an outstanding look thanks to stepless lowering in the tested adjustment range will find the ideal suspension solution in the KW V2 coilover suspension in the typical KW "inox-line". In addition to the high-quality workmanship, the use of rust-free stainless steel struts, corrosion-resistant components and the convincing durability, the KW V2 convinces with the possibility of additionally adapting the damper setup to your own requirements with the rebound stage adjustable in 16 clicks.

More comfort or more sport - you decide
As with all KW coilover suspensions, the KW engineers develop the vehicle-specific KW damper tuning, which is appreciated by car enthusiasts worldwide, in extensive test cycles on the Nürburgring Nordschleife and in our test centre on the KW 7-post driving dynamics test bench. With a KW coilover suspension you will experience your car more directly and dynamically. With the KW V2, as an experienced sports driver, you can influence the handling and comfort yourself with the individually adjustable rebound damping. The 16 precise clicks allow you to tune the KW dampers to be firmer or more comfortable without affecting the bottom valve of the compression stage.

Depending on the vehicle type, the rebound valves of the KW twin-tube dampers are adjusted at the upper end of the piston rod via an integrated adjustment wheel or the slip-on adjustment wheel included in the scope of delivery. By increasing the rebound force via the adjustment wheel, the body movements on the body are reduced. As a result, your car will track more accurately and you will have even more stability at higher cornering speeds. If, for example, you change the approved wheel/tyre combinations of your car manufacturer for larger rims, you can use the KW V2 with adjustable rebound to perfectly match the handling of your car and your new alloy wheels.

KW quality - your satisfaction is our incentive
During production at our headquarters in Fichtenberg, the KW Variant 2 "inox-line" coilover suspension kits are subjected to extensive tests during the production process in order to fulfil our quality standards. Every single damper and every suspension is extensively tested. As a German manufacturer, it is a matter of course for us to provide a warranty of up to 5 years on our coilover suspension kits, which exceed the requirements of the original equipment industry, and on our suspension programme comprising over 4,600 applications when installed by one of our KW specialist dealers.

Finally, KW coilover suspension struts are 100 per cent rust-free under all weather conditions and have an unlimited service life. The function of the stepless lowering via the dirt-resistant trapezoidal thread and the polyamide threaded ring on the KW V2 is also designed for many years of use. In a salt spray test, no oxidation occurred on the KW coilover struts. This means that the adjustment of the stepless lowering is not affected even after years of use.

- Damping technology adjustable in the rebound stage in 16 exact clicks
- Stainless steel technology inox-line
- Individual, stepless lowering
- Tested adjustment range
- Ready-to-install complete solution
- high-quality components for a long service life
- Complete documentation for easy application

Setup - Adjustable rebound damping with 16 clicks.
With the KW V2, you can further adjust the vehicle-specific KW damper tuning, which is appreciated by car enthusiasts worldwide, with 16 clicks. The rebound adjustment allows you to take into account the changes in driving dynamics that result from changing the complete set of wheels or fitting winter tyres. The damper characteristic curve of the weather-resistant KW V2 coilover suspension can be adjusted to be firmer or more comfortable, depending on your own requirements. The suspension is suitable for all sporty drivers who want more than just stepless lowering for their driving pleasure.

Please note the conditions and instructions for this product:
- VA + HA height-adjustable (VA coilover struts, HA springs with height adjustment + damper)
- For vehicles with electronic damper control, this must be decommissioned. Electronic kit for decommissioning is included in the scope of delivery for item variant "YES".
- Dampers have easy-to-operate adjustment wheels. Due to the design, the rebound stage can only be adjusted when the piston rod is accessible.
- For camber correction on the rear axle, we recommend the use of the adjustable KW wishbone.

Technical information:
Product line: Street Performance
Lowering VA/HA (mm): 20-45/20-45
Design: V2
Hardness adjustment: Rebound
Material: Stainless steel
Adjustment VA/HA: Thread/thread
Approval: Parts certificate (§19.3)

Compatible vehicles:
Manufacturer Model Version Body Fuel Performance Displacement Cylinder Drive
MINI MINI (F56) FML2, UKL-L 12/2013- Cooper Hatchback Petrol 100 KW 1499 ccm 3 Front wheel drive
MINI MINI (F56) FML2, UKL-L 12/2013- Cooper D Hatchback Diesel 85 KW 1496 ccm 3 Front wheel drive
MINI MINI (F56) FML2, UKL-L 12/2013- Cooper S Hatchback Petrol 120 KW 1998 ccm 4 Front-wheel drive
MINI MINI (F56) FML2, UKL-L 12/2013- Cooper S Hatchback Petrol 131 KW 1998 ccm 4 Front-wheel drive
MINI MINI (F56) FML2, UKL-L 12/2013- Cooper S Hatchback Petrol 141 KW 1998 ccm 4 Front-wheel drive
MINI MINI (F56) FML2, UKL-L 12/2013- Cooper S JCW Hatchback Petrol 155 KW 1998 ccm 4 Front-wheel drive
MINI MINI (F56) FML2, UKL-L 12/2013- Cooper SD Hatchback Diesel 120 KW 1995 ccm 4 Front-wheel drive
MINI MINI (F56) FML2, UKL-L 12/2013- Cooper SD Hatchback Diesel 125 KW 1995 ccm 4 Front-wheel drive
MINI MINI (F56) FML2, UKL-L 12/2013- John Cooper Works Hatchback Petrol 170 KW 1998 ccm 4 front-wheel drive
MINI MINI (F56) FML2, UKL-L 12/2013- One Hatchback Petrol 75 KW 1198 ccm 3 Front-wheel drive
MINI MINI (F56) FML2, UKL-L 12/2013- One Hatchback Petrol 75 KW 1499 ccm 3 Front-wheel drive
MINI MINI (F56) FML2, UKL-L 12/2013- One D Hatchback Diesel 70 KW 1496 ccm 3 Front-wheel drive
MINI MINI (F56) FML2, UKL-L 12/2013- One First Hatchback Petrol 55 KW 1198 ccm 3 Front-wheel drive
MINI MINI (F56) FML2, UKL-L 12/2013- One First Hatchback Petrol 55 KW 1499 ccm 3 Front-wheel drive
MINI MINI (F66, F65) 03/2024- Cooper C Hatchback Petrol 120 KW 1998 ccm 4 Front-wheel drive
MINI MINI (F66, F65) 03/2024- Cooper C (F65) Hatchback Petrol 115 KW 1499 ccm 3 Front-wheel drive
MINI MINI (F66, F65) 03/2024- Cooper S Hatchback Petrol 150 KW 1998 ccm 4 Front-wheel drive
MINI MINI (F66, F65) 03/2024- John Cooper Works Hatchback Petrol 170 KW 1998 ccm 4 Front-wheel drive

Please enter a valid email address.

Your question *

Please enter a valid question.

I agree that my data will be processed to answer the question. I have taken note of the Privacy Policy and agree to the information described therein.*

To continue, enter the characters shown above*

Fields marked with * are mandatory.

There aren't any asked questions yet.

Zuletzt gesehene Produkte

Stabilizer front + rear axle set | fits BMW 440i/M440i/M440d/420/430 (G22/G23) | 33662-4 | incl. approval | H&R

Made from high-strength spring steel, most H&R anti-roll bars can be adjusted on the front and rear axle. Precision-forged ends and the use of bearings made from a special composite material guarantee precise wheel guidance and reduce the vehicle's tendency to roll. Can be combined with all commercially available standard or sports suspensions. Brief description: - Installation location front axle: Ø 26 mm, not adjustable - Installation location rear axle: Ø 19 mm, not adjustable - with parts certificate - Please note the information! - Illustration may differ from the original The product benefits at a glance: - Reduced rolling tendency of the vehicle - Better handling due to reduced body roll - Partially multi-adjustable - Minimal loss of comfort - Under- or oversteer are reduced or changed - Can be installed with standard or sports suspension - High-strength special spring steel - Bearings made from special composite material - In-house development and production in Germany - With parts certificate Note 55: When installing the H&R stabilisers, the standard add-on parts must also be used, unless otherwise supplied by H&R. It must be ensured that the original parts to be used are in perfect condition; if necessary, these parts must be replaced. Note 60: With this stabiliser bar set, the VA stabiliser bar can also be installed separately (without the HA stabiliser bar) and is approved. However, if only the front stabiliser bar is installed separately, the vehicle may have a tendency to understeer. Usage numbers: 33662-4, 336624 Compatible vehicles: - BMW 4 Series Convertible (G23, G83) M 440i Mild-Hybrid xDrive (275 kW, 374 hp) - BMW 4 Series Convertible (G23, G83) M 440i Mild-Hybrid xDrive (285 kW, 387 hp) - BMW 4 Series Coupe (G22, G82) 420d Mild-Hybrid xDrive (140 kW, 190 hp) - BMW 4 Series Coupe (G22, G82) 430d Mild-Hybrid xDrive (210 kW, 286 hp) - BMW 4 Series Coupe (G22, G82) 430i xDrive (190 kW, 258 hp) - BMW 4 Series Coupe (G22, G82) M 440d Mild-Hybrid xDrive (275 kW, 374 hp) - BMW 4 Series Coupe (G22, G82) M 440i Mild-Hybrid xDrive (285 kW, 387 hp)

€674.00*

Aulitzky Exhaust | ECE rear silencer 3” (76mm) with flap control | fits Toyota Supra 3.0 GR Legend (DB/A90) 340hp B58

Facts: - 3.0 inch (76mm) stainless steel - Tailpipes: 2x black - electric flaps - Made in Germany (Lake Constance) - with/without ECE approval (depending on choice of flap control)* Scope of delivery: - 1x Aulitzky Exhaust rear silencer - 2x black tailpipes - ECE handout Compatible vehicles:VehicleVehicle typePower Engine capacityEngineYear of constructionToyota Supra (DB/A90)3.0 GR /Legend250kW / 340hp2998cm³B5803.19 - *ATTENTION! In conjunction with the standard or ECE flap control system (with type approval), this flap rear silencer has ECE approval, meaning that it can be used legally within the scope of the StVZO without registration in the vehicle documents.The use of flap rear silencers in conjunction with the race flap control (without approval) is not permitted for use on public roads and is only intended for racing purposes! If you nevertheless install a product without approval in your vehicle and use it within the scope of the StVZO, you are liable to prosecution. Possible consequences that you can expect in this case: Expiry of the operating licence in accordance with §19 of the StVZO and possible resulting immobilisation of the vehicle. Other possible consequences, such as a charge of tax evasion, as well as possible investigations by the environmental authorities are at the discretion of the investigators.

€3,799.00*

Tip

Aulitzky Exhaust | ECE downpipe 3” (76mm) with sports catalyst | fits Skoda Octavia RS 220/230 (5E)

Facts: - replaces the main catalyst - with 200 cell stainless steel sports catalyst - Euro 6 compatible - with ECE approval* Compatible vehicles: VehicleVehicle typePowerEngine capacityEngineYear of construction SkodaOctavia III RS (5E)162kW / 220hp1984cm³ (2.0 TSI)CHHB05.13 - 02.17 SkodaOctavia III RS (5E)169kW / 230hp1984cm³ (2.0 TSI)CHHA05.15 - 10.20 Note: Depending on the software version, the engine control light may light up. We recommend a software adjustment in this case. *This downpipe has ECE approval so that it can be used within the scope of the German Road Traffic Licensing Regulations (StVZO) without registration in the vehicle documents.

From €1,980.00*

Details

KW V3 coilover suspension inox | fits Toyota Yaris 1.6 GR (P21) | 35256023

KW V3 coilover suspension Unlimited individuality for performance & comfort. Separate damper force adjustment for rebound and compression damping.As with every KW coilover suspension, our suspension engineers also develop a sporty and harmonious basic set-up for the vehicle-specific applications of the KW V3. In addition to tests on our KW 7-post driving dynamics test bench, we also carry out extensive test drives on country roads, the motorway and even on the Nürburgring Nordschleife, kilometre by kilometre, to guarantee you the perfect suspension set-up. For years, the KW V3, one of the world's top aftermarket products, has been the reference for coilover suspensions. With its damper characteristics, high-quality workmanship and excellent durability, it has impressed discerning sports car drivers, tuners, large and small series manufacturers such as Alpina, MTM, Manthey, Oettinger and many other well-known companies in the international automotive industry. Cutting-edge technology from motorsportYou get much more than a sporty lowering and excellent handling on all roads with the KW V3. It is based on our many years of experience as a suspension manufacturer and supplier in international motorsport, such as in the ADAC GT Masters touring car series, FIA GT1, FIA GT3, International GT Open, WTC, VLN and also in the legendary ADAC Zurich 24h Race Nürburgring.Similar to our racing coilovers from the KW Competition programme, the rebound and compression damping of the KW V3 can be adjusted independently of each other. This individual tuning option is appreciated by tuners, sports car manufacturers, tuners and demanding drivers worldwide. The perfect suspension setup for significantly more driving dynamicsIf you have already carried out initial performance modifications to your sporty road vehicle, it is easy to incorporate these into the damper set-up in a targeted manner with the KW V3. The patented KW valve technology for the separate adjustment of the rebound and compression damping allows you to customise the vehicle-specific basic set-up from KW. For example, the KW bottom valve, which can be adjusted in twelve clicks in the low-speed range of the compression stage, gives you the freedom to even take the tyre characteristics of your high and ultra-high performance road tyres into account in the suspension set-up.Thanks to the patented compression adjustment at the lower piston end of the stainless steel housing, you don't even need any tools. The adjustable compression adjustment with its twelve precise clicks allows you to influence body roll and body roll movements by hand without having to change the rebound damping to match the spring rate.With the individually adjustable rebound damping of the KW V3, you can directly influence the handling and comfort through the exact click adjustment. Depending on the vehicle type, the rebound valves of the KW twin-tube dampers are adjusted at the upper end of the piston rod via an integrated adjustment wheel or the slip-on adjustment wheel included in the scope of delivery.By increasing the rebound force via the adjustment wheel, the body movements on the body are reduced. As a result, your car tracks more accurately and you have even more stability at higher cornering speeds. If, for example, you change from the approved wheel/tyre combinations of your car manufacturer to larger rims, you can use the KW V3 to perfectly match the handling of your car and your new alloy wheels. High-quality, customised and durableThe KW V3 is subjected to extensive quality tests during production and every single damper is checked. This is the only way we can fulfil our claim to provide a warranty of up to five years when a KW coilover suspension V3 is installed by a KW specialist dealer. Due to the filigree workmanship and the use of high-quality components, the KW coilover struts made of stainless steel, for example, are 100 per cent rust-free and have an unlimited service life.This means that the functionality of the stepless lowering system via the dirt-resistant KW trapezoidal thread and the KW polyamide threaded ring is not impaired even after many years. Thanks to the individual lowering with its stepless adjustment range, you can also emphasise the sportiness of your vehicle visually. A feature that is very popular in the performance-orientated tuning scene. - Freely adjustable damping technology in rebound and compression damping- inox-line stainless steel technology- Individual, stepless lowering- Tested adjustment range- high-quality components for a long service life- adjustable rebound damping with 16 exact clicks- 12-way adjustable compression damping with click adjustment- Unique, independently acting damping force adjustment Setup: The individually adjustable rebound & compression damping of the KW V3The KW V3 is the ideal accessory for performance-orientated drivers and tuning enthusiasts who demand a high level of sportiness from their vehicles. The dampers, which are separately adjustable in rebound and compression, allow extensive damper tuning with their sophisticated click adjustment. This makes it easy to directly influence the turn-in behaviour, directional stability, tyre grip and handling characteristics for safe controllability at the limit. Please note the conditions and instructions for this product: - VA + HA height adjustable (VA coilover struts, HA springs with height adjustment + dampers) - Dampers have easy-to-use adjustment wheels. Due to the design, the rebound stage can only be adjusted when the piston rod is accessible. Technical information: Lowering VA/HA (mm): 25-45/25-45 Design: V3 Height adjustment: Rebound and compression Material: Stainless steel Adjustment VA/HA: Thread/thread Approval: Parts certificate (§19.3) Compatible vehicles: Manufacturer Model Version Body Fuel Performance Displacement Cylinder Drive TOYOTA YARIS (_P21_, _PA1_, _PH1_) 02/2020- 1.6 GR 4WD (GXPA16) Hatchback Petrol 192 KW 1618 ccm 3 All-wheel drive

€2,278.85*

KW V2 coilover suspension inox | fits Mini FWD incl. JCW (F56/F65/F66) | 152200AG | 152200AH

Ratenrechner

Ask a question

Previously asked questions