Free shipping
info@aulitzkytuning.de
+49 (0)9874 6891630

Air intake system Carbon Ø76mm | fits VAG 2.0 TSI EA888 Gen.3 Golf 7 GTI/R, Leon Cupra 5F, Octavia RS 5E | Wagner Tuning

€1,020.00*

Delivery time: approx. 1-5 working days*

place a request
Product number: WT300001001
Product information "Air intake system Carbon Ø76mm | fits VAG 2.0 TSI EA888 Gen.3 Golf 7 GTI/R, Leon Cupra 5F, Octavia RS 5E | Wagner Tuning"

The Wagner Tuning carbon air intake system is suitable for the following vehicles:
VW Golf 7 GTI 2,0TSI year 2013-2019 (MKB: CHHB/CHHA/DLBA/CJXE/CJXG/DNUC)
VW Golf 7 R 2.0TSI year 2013-2020 (MKB: CJXG/CJXC/DNUE/DJHA)
Skoda Octavia RS 2.0TSI year 2013-2018 (MKB: CHHB/CHHA/DLBA)
Seat Leon Cupra 2.0TSI year 2014-2019 (MKB: CJXE/CJXA/CJXH/DNUC/CJXC/DNUE/CJXG)*
*with minor adjustments to the lock carrier

Discover the new Wagner Tuning carbon air intake system for the 2.0 TSI: Perfection in performance and design!

The Wagner Tuning air intake system sets new standards for maximum performance and a unique driving experience. As a direct replacement for the standard system, it eliminates weak points and optimizes the performance of your vehicle.

Our carbon air intake system was developed with elaborate 3D flow simulations to ensure optimal flow characteristics. The result is maximum performance combined with a unique intake sound that will delight every driver.

The kit includes a specially developed sports air filter that offers maximum filtration efficiency with minimum back pressure. The connection diameter in the direction of the turbocharger is Ø76mm and is perfectly adapted to the original connection diameter of the turbocharger using a silicone hose. This increases the air mass flow rate by +50%, which leads to improved engine response and a direct increase in performance.

Our air intake system not only impresses with its outstanding performance, but also with its elegant appearance and high-quality workmanship. The carbon airbox and the Ø76mm aluminum intake manifold refine your engine compartment and set visual accents.

Scope of delivery:
1 carbon airbox
1 Ø76mm aluminum intake manifold
1 silicone hose (black)
1 sports air filter
1 mounting material
1 installation instructions

Ready to take your driving experience to a new level? Experience perfection in performance and design with the Wagner Tuning carbon air intake system for your Skoda Octavia RS 5E 2.0 TSI.
Order now and find out more - your way to more performance and driving pleasure!

Attention: Not approved in the area of the StVZO.

Please enter a valid email address.
Please enter a valid question.
Fields marked with * are mandatory.

There aren't any asked questions yet.
Zuletzt gesehene Produkte

Zuletzt gesehene Produkte

Brake system VA 342x34mm 6K | fits A4/S4/A5/S5 (B8), Golf VII GTI/CS/R, T5/T6, Golf IV 4motion, Beetle 5C | parts certificate | MOVIT
MOVIT DDE steel brake system 342x34mm (6 piston calliper) for the front axle, from 18 inch rims upwardsApplication-focussed development is the cornerstone of this high-performance brake system. The required balance of weight, performance and durability is optimally combined. The uncompromising selection of materials in production results in a highly unique product that meets the diverse requirements of extreme automotive applications. The most important features of the MOVIT brake system are- The progressive staggering of the piston diameters, matched to the vehicle, so that precisely parallel contact pressure between the pad and the disc is guaranteed. This enables even wear of the brake pads and ensures even heat transfer and a reduced system temperature.- Very good heat dissipation due to the open design of the brake pad contour.- Calipers manufactured from high-strength, highly tempered aircraft aluminium 7075 with high-quality material properties (stiffer components, more homogeneous structure), hard anodised and coated with a triple layer of paint.- Optimised stability due to the length of the callipers- Larger brake disc diameter and thickness, more cross holes (each pre-cast hole is re-drilled and countersunk, which has a favourable effect on the flow).- The brake discs are thermally tempered.- The optimised DDE ventilation system (double directional evolvent system) of the brake disc has an 80% larger surface area compared to other brake discs, the temperature of the brake disc is significantly reduced and therefore also the wear.- Long service life of the wearing parts, excellent response behaviour, steel flex lines ensure consistent performance.- Optimally matched brake pads ensure fading resistance, a long service life and reduced wear on spare parts Attention: The conversion means that only rims with at least 18 inches can be fitted! The chassis number of the vehicle on which the brakes are fitted is required for the parts certificate. MOVIT sports brake callipers, 6-piston- Milled from high-strength aircraft aluminium 7075- Two-piece- Use of maximum disc size due to long design- Significantly improved rigidity and extended contact surface of the pad- Uniform heat transfer- Reduced system temperature- Low, even pad wear- Progressive piston staggering- Crown system for fixing the brake hose- RAPAD-X system for quick brake pad replacement without removing the caliper from the bracket- Open brake pad track for optimised cooling- Maximum stability- Maximum braking force MOVIT sports brake discs, 342x34mm, 2-piece- Highly efficient DDE cooling system- Perforated for optimum response behaviour even on wet roads- Maximum fading resistance- Special alloy for high thermal conductivity MOVIT comfort brake pads- Enlarged friction surface- Lower system temperature- Uniform heat transfer- Longer service life Scope of delivery:2x MOVIT brake caliper (left/right)2x MOVIT brake disc (left/right)2x vehicle-specific brake caliper adapter1x set of comfort brake pads2x steel flex lines1x assembly material1x installation instructions and running-in instructions1x parts certificate Compatible vehicles:Audi A4 / S4 8K / B8Audi A5 / S5 8TVW Beetle 5CVW Golf IV 4motionVW Golf VII GTI / GTD 57 series pistonsVW Golf VII GTI / GTD 57 series pistonsVW GOLF VII GTI Clubsport / Performance 60 series pistonsVW T5 / T6 Multivan

€4,805.00*
%
Water cooler kit | fits Mercedes-Benz A45 AMG (W176) / CLA45 AMG (C117) / GLA45 AMG (X156) | Wagner Tuning
Suitable for the following vehicles: Mercedes Benz W176 A 45 AMG 265-280KW/360-381hp (2013-2018) Mercedes Benz C117 CLA 45 AMG 265-280KW/360-381hp (2013-2018) Mercedes Benz X156 GLA 45 AMG 265-280KW/360-381hp (2014-2019) The 2.0L M 133 turbo engine of the specified A-Class models from AMG is equipped with an indirect charge air cooling circuit. This means that the charge air cooling process is not realised using the ambient air as a cooling medium (as usual), but with the help of a separate cooling water circuit. A reduction in the cooling water temperature can therefore be directly equated with an improved cooling performance of the charge air. This is precisely where the advantages of the WAGNERTUNING upgrade water coolers come into play. The newly developed competition racing nets of the WAGNERTUNING high-performance water coolers increase the radiator volume of the standard water coolers by a total of 78%. The ratio between the inner and outer cooling surface generates maximum heat transfer and at the same time allows the neighbouring components (e.g. the engine water cooler behind it) sufficient airflow for heat exchange. Furthermore, the water coolers are equipped with a thermally conductive anti-corrosion coating to ensure a long-lasting cooling effect. Installation of the system is also straightforward and plug & play with the help of our installation instructions. Now with parts certificate! OEM front radiator dimensions: 640 mm x 390 mm x 16 mm V = 3.99 litres A = 2496 cm² WT front radiator dimensions: 616 mm x 362 mm x 32 mm V = 7.14 litres A = 2230 cm² OEM side cooler dimensions: 248 mm x 180 mm x 40 mm V = 1.79 litres A = 446 cm² WT side cooler dimensions: 252 mm x 184 mm x 68 mm V = 3.15 litres A = 464 cm² Attention: Not approved in the area of the StVZO.

€1,740.00* €1,930.00* (9.84% saved)
KW DDC ECU coilover suspension inox | fits BMW 1 Series M Coupé (E82) 340hp N54 | 39020004
KW coilover suspension DDC ECU KW Dynamic Damping Control ECU Individuality at the push of a button. The KW DDC coilovers are the intelligent suspension solution for retrofitting from the KW iSuspension product range. They combine the advantages of an adaptive damping system with a vehicle-specific sporty and harmonious damper characteristic with a stylish and sporty lowering. The adaptive KW coilovers are available in the KW DDC ECU version with optional app control for vehicles without actively controlled standard suspension and as KW DDC Plug & Play version for selected vehicle models with adaptive standard suspension. The adaptive KW DDC ECU coilovers allow a stepless lowering in the tested adjustment range. Thanks to the dirt-resistant trapezoidal thread and the polyamide threaded ring, the stepless lowering can be varied quickly and easily even after years. Depending on the vehicle, lowering takes place either on the wheel-guiding KW stainless steel suspension struts or, in the case of non-wheel-guiding double wishbone rear axles, on the rear axle height adjustment. No matter where in the world, sporty drivers, car manufacturers and tuners trust in our KW technology “Made in Germany”. Every KW coilover suspension is subjected to extensive load tests during production and is developed and manufactured directly at our company headquarters in Fichtenberg, Swabia, in order to meet the high standards of our KW quality management. As a German manufacturer, it is a matter of course for us to offer a multi-year warranty on our KW coilover suspension kits, which exceed OEM quality and cover over 4,600 applications. It is up to five years when installed by one of our KW specialist dealers. The adaptive KW DDC ECU coilovers with app control are currently available for Audi, BMW, Mercedes-Benz, Porsche, VW and many other vehicles such as the Range Rover Evoque. - retrofittable electronic damper adjustment, combined with the advantages of a KW coilover suspension - with optional app control - Three damping setups: Comfort / Sport / Sport + - Operation via retrofit button or optional app - Create your own setups intuitively via KW DDC app KW DDC button - 1x button, 3x learn more The scope of delivery of the KW DDC ECU coilover kit also includes a KW DDC button. This allows you to select the KW DDC driving modes “Comfort”, “Sport” and “Sport+” directly from the cockpit. The KW DDC button changes the color to fit the KW DDC APP. W-LAN module & app control Optionally available app control for live suspension tuning via iPhone, iPod touch, iPad. Experience top-class innovation and quality “Made in Germany”: the KW DDC (Dynamic Damping Control) coilover suspension with ECU (Electronic Control Unit). The coilover suspension with its electronically adjustable dampers enables intelligent suspension tuning via app control and is already available for numerous vehicles without adaptive standard suspension. This allows you to upgrade your vehicle with adaptive damper control and optionally adapt it to your driving style via the KW DDC app. You do not need any tools or have to work on the dampers yourself. The free KW DDC App in combination with our optionally available W-Lan module is your tool to perform an individual damper tuning live and in real time. Please note the conditions and instructions for this product: - VA + HA height-adjustable (VA coilover struts, HA springs with height adjustment + damper) Technical info: Lowering VA/HA (mm): 10-35/5-25 Version: DDC - ECU Hardness adjustment: Rebound and compression stage Material: Stainless steel Adjustment VA/HA: thread/thread Approval: Parts certificate (§19.3) Compatible vehicles: Manufacturer Model Version Body Fuel Performance Displacement Cylinder Drive BMW 1 Series Coupe (E82) 182, 1C, M-V 10/2006-10/2013 M Coupe Petrol 250 KW 2979 ccm 6 Rear-wheel drive

€3,686.62*
Brake air duct Carbon for 1M Raze front lip | fits BMW 1 series M (E82) 340hp N54 | RevoZport
This brake cooling duct kit is designed to be adapted to the 1M Raze front splitter to provide fresh cooling air directly to the brake discs. Application: Fits 1M Raze front splitter onlyMaterial: FRP or carbonInstallation: bolt-onExpert opinion: Material certificate Compatible vehicles:VehicleVehicle typePowerEngine capacityEngine typeYear of construction BMW 1er Coupe (E82)M250kW / 340hp2979cm³N54 B30 A03.11 - 06.12

€959.00*
KW V3 Clubsport coilover suspension | fits Mercedes-Benz C63 AMG (W204) | 35225833
KW V3 Clubsport coilover suspension incl. support bearing With an uncompromising technology transfer from racing to the road, the KW Clubsport coilovers convince.The KW Clubsport coilovers convince with their uncompromising combination of high-end racing technology with maintenance-free KW original equipment components and expertises.This gives you the ideal accessories to realise the full potential of your sports car at trackdays, sports driver training courses, tourist drives on Grand Prix circuits and on the Nürburgring Nordschleife. Developed for the toughest racetrack in the world: the Nürburgring NordschleifeEven in their basic set-up, KW Clubsport coilovers are tuned to the different track surfaces, steep bends, jumps and chicanes of the 20.8 kilometre long Nürburgring Nordschleife. After all, as one of the most successful suspension manufacturers and suppliers in motorsport, we are at home on the Nordschleife.In the VLN Endurance Championship alone, we equip over 70 racing teams and, as a suspension manufacturer, have supported six overall victories at the ADAC Zurich 24h Race Nürburgring in ten years. The winner of the ADAC GT Masters 2011 also relies on our racing expertise, from which the KW Clubsport coilovers benefit.The basic setup of the KW V3 Clubsport and KW V4 Clubsport with separate expansion tank, which is perfectly adapted to the Nordschleife, allows you to adjust your sports car even more individually to the desired sports tyre setup thanks to the numerous adjustment options.In addition to optionally available adjustable support bearings, you can adjust the damping forces of the KW Clubsport coilovers independently in the rebound and compression stages with the integrated KW V3 Clubsport coilover suspension technology like in racingWith the adjustment wheels for the rebound adjustment, you can fine-tune the recommended basic setup for your sports car and your individually installed performance components with 16 exact clicks. This allows you to directly influence changed wheel loads, for example to influence bodywork movements. Separate from the rebound adjustment, the KW V3 Clubsport allows you to adjust the compression damping with twelve exact clicks in the low-speed range to your requirements, such as the sports tyres used.These setting options allow you to consider individual setups to suit the vehicle weight, sports tyre characteristics, track characteristics and operating conditions. - Freely adjustable damping technology in rebound and compression damping- Stainless steel technology "inox-line"- Stepless lowering- Tested adjustment range- high-quality components for a long service life- Adjustable rebound damping with 16 exact clicks- Adjustable compression damping with 12 exact clicks- Unique, independently acting damping force adjustment- optionally available with aluminium Unibal support bearing. Setup: Application range and damper tuningThe KW V3 Clubsport coilover suspensions impress with their vehicle-specific setup for trackday events on the Nürburgring Nordschleife, as well as the possibility of quickly tuning these suspensions for other racetracks and individual performance sports cars. Please note the conditions and instructions for this product: - VA + HA height adjustable (VA coilover struts, HA springs with height adjustment + damper) - When used with standard wheel/tyre combinations, additional standard wheel spacers from the accessories may be required - Clubsport suspension with support bearing: only available with VA support bearing Technical information: Lowering VA/HA (mm): 5-30/0-30 Version: V3 Clubsport Hardness adjustment: Rebound and compression Material: Stainless steel Adjustment VA/HA: Thread/thread Approval: Parts certificate (§19.3) Compatible vehicles: Manufacturer Model Version Body Fuel Performance Displacement Cylinder Drive MERCEDES-BENZ C-KLASSE (W204) 204, 204 AMG, 204K 01/2007-01/2015 C 63 AMG (204. 077) Notchback Petrol 336 KW 6208 ccm 8 Rear-wheel drive MERCEDES-BENZ C-KLASSE (W204) 204, 204 AMG, 204K 01/2007-01/2015 C 63 AMG (204.077) Notchback Petrol 358 KW 6208 ccm 8 Rear-wheel drive MERCEDES-BENZ C-KLASSE (W204) 204, 204 AMG, 204K 01/2007-01/2015 C 63 AMG (204.077) Notchback Petrol 373 KW 6208 ccm 8 Rear-wheel drive

€3,743.74*