Y-intake manifold kit | fits Porsche 911 (991.1 / 991.2) 3.8 Turbo/ S | Wagner Tuning

KW V1 coilover suspension Sportiness paired with outstanding looks. With factory pre-configured damping.Our entry-level model for more driving pleasure through an appealing and individually adjustable lowering is the KW V1 coilover suspension in the KW typical "inox-line". Thanks to its high-quality workmanship, the consistent use of stainless steel struts, corrosion-resistant springs and harmonised components, it stands for many years of driving pleasure - and not just for the life of the car. Stepless loweringThe KW V1 enables maximum lowering within the tested adjustment range. This varies depending on the vehicle model and can, for example, be between 30 and 70 millimetres or 50 to 90 millimetres for an individual lowering. Thanks to the dirt-resistant trapezoidal thread and the polyamide threaded ring, the stepless lowering can be varied quickly and easily even years later. Depending on the vehicle, the lowering is carried out either on the wheel-guiding KW stainless steel suspension struts or on the rear axle height adjustment for non-wheel-guiding double-wishbone rear axles. The benchmark for sporty, dynamic tuning fansWith its harmonious basic set-up for sporty driving on the road, the KW V1 convinces the discerning tuning fan. Our development engineers determine a specific damper set-up and spring rate for each vehicle in order to increase your driving pleasure with the optimum balance of sportiness and suitability for everyday use. After all, you are not buying just any coilover suspension, but a KW coilover suspension that has been specially developed and tuned for your vehicle type. As a manufacturer, KW only uses its own resources, high-quality components and the same damper technology as mass-produced manufacturers. With the KW V1, the rolling and rolling movements of the vehicle body are reduced during compression, allowing you to benefit from unadulterated directness and sportier handling when driving. Our experience for your driving pleasureAs a manufacturer of customised suspension solutions for road and racing, we have been the market leader and innovation driver for over 25 years. No matter where in the world, sporty drivers, car manufacturers and tuners rely on our KW coilovers "Made in Germany". Every KW coilover suspension is subjected to extensive load tests during production and is developed and manufactured directly at our company headquarters in Fichtenberg, Swabia, in order to fulfil the high standards of our KW quality management. As a German manufacturer, it is a matter of course for us to provide a multi-year warranty on our KW coilover suspension kits, which exceed OEM quality and cover over 4,600 applications. When installed by one of our KW specialist dealers, the warranty is up to five years. - Optimally adjusted in advance- sporty and harmonious damping technology- Stainless steel technology "inox-line"- Individually height-adjustable- Tested adjustment range- Ready-to-install complete solution- High-quality components for a long service life- Complete documentation for easy handling Setup - factory pre-configured damping setupThe KW V1 has a vehicle-specific, permanently configured damper setup. The spring and damper are perfectly matched to each other so that you experience an optimum balance of sportiness and suitability for everyday use when driving. Even with a full payload and maximum axle loads, the dampers always work with a sporty characteristic curve. It is interesting to note that the KW V1 is particularly popular with tuning enthusiasts who prioritise the idea of show & shine. Please note the conditions and instructions for this product:- VA + HA height-adjustable (VA coilover struts, HA springs with height adjustment + damper) Technical information:Lowering VA/HA (mm): 5-35/0-25Version: V1Hardness adjustment: noneMaterial: Stainless steelAdjustment VA/HA: thread/threadApproval: Parts certificate (§19.3) Compatible vehicles:Manufacturer Model Version Body Fuel Performance Displacement Cylinder DriveAUDI A3 Sportback (8P) 8PA 09/2004-12/2015 RS3 quattro hatchback petrol 250 KW 2480 ccm 5 all-wheel drive

The Wagner Tuning Performance Intercooler Kit EVO 1 fits the following vehicles with N54/N55 engines:BMW 135i E82/E88 2006-2013BMW 1 SeriesM E82 2011-2013BMW 335 (x)i E90/E91/E92/93 2006-2013BMW 335is E92 2009-2013BMW Z4 18i (N20) E89 2011-2016BMW Z4 20i (N20) E89 2011-2016BMW Z4 28i (N20) E89 2001-2016BMW Z4 35i E89 2009-2016BMW Z4 35is E89 2010-2016 Boost the performance of your vehicle with our EVO 1 Performance intercooler kit! Immerse yourself in a world of unrivalled performance with our EVO 1 Performance Intercooler Kit, specially developed for 1 Series E81, E82, E87 and E88 models, especially for the first power levels of the engines. What characterises this intercooler are its impressive specifications. With mesh dimensions of 520 mm x 210 mm x 130 mm and a stepped structure of 11,750 cm³, our EVO 1 offers a staggering 85% larger flow area and a 60% increase in charge air volume compared to the original intercooler. This means not only more power, but also optimised cooling for your engine. At the heart of this kit is our performance high performance mesh, a bar-and-plate mesh of the highest quality with outstanding cooling properties. The end boxes are made from lightweight cast aluminium and have been carefully optimised in the CFD system to ensure the best airflow. This results in less back pressure than your standard intercooler. Our products are designed for durability and performance. That's why our EVO 1 has an anti-corrosion coating with heat conduction properties that ensures long-lasting and optimal cooling with a significant increase in performance. Installation is a breeze. Our kit is a completely ready-to-install package that is simply swapped for the stock intercooler - a true plug-and-play experience. The original charge air hoses can still be used, giving you additional flexibility. Our EVO 1 Performance intercooler kit has been extensively tested and is pressure stable up to 6 bar. All our products are subject to strict quality control to ensure you get only the best. Ready to take your vehicle to the next level? Order your EVO 1 Performance Intercooler Kit now and experience the ultimate in driving dynamics. Advantages of the Wagner Tuning intercooler:- improved cooling performance- 85% larger inflow area- 60% more charge air volume- flow-optimised- less back pressure- Plug & Play Scope of delivery:1 intercooler1 mounting material1 installation instruction Attention: Not approved in the area of the StVZO.

KW coilover suspension DDC ECU KW Dynamic Damping Control ECU Individuality at the push of a button. The KW DDC coilovers are the intelligent suspension solution for retrofitting from the KW iSuspension product range. They combine the advantages of an adaptive damping system with a vehicle-specific sporty and harmonious damper characteristic with a stylish and sporty lowering. The adaptive KW coilovers are available in the KW DDC ECU version with optional app control for vehicles without actively controlled standard suspension and as KW DDC Plug & Play version for selected vehicle models with adaptive standard suspension. The adaptive KW DDC ECU coilovers allow a stepless lowering in the tested adjustment range. Thanks to the dirt-resistant trapezoidal thread and the polyamide threaded ring, the stepless lowering can be varied quickly and easily even after years. Depending on the vehicle, lowering takes place either on the wheel-guiding KW stainless steel suspension struts or, in the case of non-wheel-guiding double wishbone rear axles, on the rear axle height adjustment. No matter where in the world, sporty drivers, car manufacturers and tuners trust in our KW technology “Made in Germany”. Every KW coilover suspension is subjected to extensive load tests during production and is developed and manufactured directly at our company headquarters in Fichtenberg, Swabia, in order to meet the high standards of our KW quality management. As a German manufacturer, it is a matter of course for us to offer a multi-year warranty on our KW coilover suspension kits, which exceed OEM quality and cover over 4,600 applications. It is up to five years when installed by one of our KW specialist dealers. The adaptive KW DDC ECU coilovers with app control are currently available for Audi, BMW, Mercedes-Benz, Porsche, VW and many other vehicles such as the Range Rover Evoque. - retrofittable electronic damper adjustment, combined with the advantages of a KW coilover suspension - with optional app control - Three damping setups: Comfort / Sport / Sport + - Operation via retrofit button or optional app - Create your own setups intuitively via KW DDC app KW DDC button - 1x button, 3x learn more The scope of delivery of the KW DDC ECU coilover kit also includes a KW DDC button. This allows you to select the KW DDC driving modes “Comfort”, “Sport” and “Sport+” directly from the cockpit. The KW DDC button changes the color to fit the KW DDC APP. W-LAN module & app control Optionally available app control for live suspension tuning via iPhone, iPod touch, iPad. Experience top-class innovation and quality “Made in Germany”: the KW DDC (Dynamic Damping Control) coilover suspension with ECU (Electronic Control Unit). The coilover suspension with its electronically adjustable dampers enables intelligent suspension tuning via app control and is already available for numerous vehicles without adaptive standard suspension. This allows you to upgrade your vehicle with adaptive damper control and optionally adapt it to your driving style via the KW DDC app. You do not need any tools or have to work on the dampers yourself. The free KW DDC App in combination with our optionally available W-Lan module is your tool to perform an individual damper tuning live and in real time. Please note the conditions and instructions for this product: - VA + HA height-adjustable (VA coilover struts, HA springs with height adjustment + damper) - For vehicles with electronic damper control, this must be deactivated. Vehicle-specific KW deactivation kits can be found in the accessories table. - Only for vehicles with a clamping diameter on the VA of 55mm Technical information: Lowering VA/HA (mm): 10-40/10-40 Version: DDC - ECU Hardness adjustment: Rebound and compression Material: Stainless steel Adjustment VA/HA: Thread/thread Strut clamping diameter VA (mm): 55 Approval: Parts certificate (§19.3) Compatible vehicles: Manufacturer Model Version Body Fuel Performance Displacement Cylinder Drive AUDI A3 (8P) 8P1 05/2003-12/2013 2.0 TDI 16V quattro Hatchback Diesel 103 KW 1968 ccm 4 All-wheel drive AUDI A3 (8P) 8P1 05/2003-12/2013 2.0 TDI quattro Hatchback Diesel 100 KW 1968 ccm 4 All-wheel drive AUDI A3 (8P) 8P1 05/2003-12/2013 2. 0 TDI quattro Hatchback Diesel 103 KW 1968 ccm 4 All-wheel drive AUDI A3 (8P) 8P1 05/2003-12/2013 2.0 TDI quattro Hatchback Diesel 125 KW 1968 ccm 4 All-wheel drive AUDI A3 (8P) 8P1 05/2003-12/2013 2.0 TFSI quattro Hatchback Petrol 147 KW 1984 ccm 4 All-wheel drive AUDI A3 (8P) 8P1 05/2003-12/2013 3. 2 V6 quattro Hatchback Petrol 184 KW 3189 ccm 6 All-wheel drive AUDI A3 (8P) 8P1 05/2003-12/2013 S3 quattro Hatchback Petrol 188 KW 1984 ccm 4 All-wheel drive AUDI A3 (8P) 8P1 05/2003-12/2013 S3 quattro Hatchback Petrol 195 KW 1984 ccm 4 All-wheel drive AUDI A3 Sportback (8P) 8PA 09/2004-12/2015 2.0 TDI 16V quattro Hatchback Diesel 103 KW 1968 ccm 4 All-wheel drive AUDI A3 Sportback (8P) 8PA 09/2004-12/2015 2. 0 TDI quattro Hatchback Diesel 103 KW 1968 ccm 4 All-wheel drive AUDI A3 Sportback (8P) 8PA 09/2004-12/2015 2.0 TDI quattro Hatchback Diesel 125 KW 1968 ccm 4 All-wheel drive AUDI A3 Sportback (8P) 8PA 09/2004-12/2015 2.0 TFSI quattro Hatchback Petrol 147 KW 1984 ccm 4 All-wheel drive AUDI A3 Sportback (8P) 8PA 09/2004-12/2015 3. 2 V6 quattro Hatchback Petrol 184 KW 3189 ccm 6 All-wheel drive AUDI A3 Sportback (8P) 8PA 09/2004-12/2015 S3 quattro Hatchback Petrol 188 KW 1984 ccm 4 All-wheel drive AUDI A3 Sportback (8P) 8PA 09/2004-12/2015 S3 quattro Hatchback Petrol 195 KW 1984 ccm 4 All-wheel drive

Suitable for the following vehicles:Mercedes Benz W176 A 45 AMG 265-280KW/360-381hp (2013-2018)Mercedes Benz C117 CLA 45 AMG 265-280KW/360-381hp (2013-2018)Mercedes Benz X156 GLA 45 AMG 265-280KW/360-381hp (2014-2019) The 2.0L M 133 turbo engine of the specified A-Class models from AMG is equipped with an indirect charge air cooling circuit. This means that the charge air is not cooled using the ambient air as a cooling medium (as usual), but with the aid of a separate cooling water circuit. A reduction in the cooling water temperature can therefore be directly equated with an improved cooling performance of the charge air. This is precisely where the advantages of the WAGNERTUNING upgrade water cooler come into play. The newly developed competition racing mesh of the WAGNERTUNING high-performance water cooler increases the radiator volume of the standard water cooler by 79%. The ratio between the inner and outer cooling surface generates maximum heat transfer and at the same time allows the adjacent components (e.g. the engine water cooler located behind it) sufficient air flow for heat exchange. Furthermore, the increased cooling water volume allows the entire system thermal to be kept at a lower level over a longer period of time. All WAGNERTUNING water coolers are equipped with a thermally conductive anti-corrosion coating to ensure a long-lasting cooling effect. Installation of the system is also uncomplicated and plug & play with the help of our installation instructions. OEM front cooler dimensions - WT front cooler dimensions:640 mm x 390 mm x 16 mm - 616 mm x 362 mm x 32 mmV = 3.99 liters - V = 7.14 litersA = 2496 cm² - A = 2230 cm² With parts certificate (for easy registration according to §19 paragraph 3 of the StVZO).