Side diffusers SOOQOO Carbon | fits BMW M3 incl. Competition (G80/G81) | Aulitzky Tuning

Wagner Tuning Competition Intercooler Kit EVO2 fits for:Audi RSQ3 quattro 228KW/310hpAudi RSQ3 quattro 250KW/340hpAudi RSQ3 quattro Performance 270KW/367hp Increase the performance of your Audi RSQ3 2.5 TFSI with our Competition Intercooler Evo 2 Kit Present your Audi RSQ3 in top form with our innovative Competition Intercooler Evo 2 Kit. Here's what this kit has to offer. Our intercooler kit offers a significantly larger flow area, 87% larger than the factory cooler. The result? An impressive 70% increase in charge air volume. This means more power and efficiency for your vehicle. Our new Competition high-performance mesh ensures excellent cooling performance. It ensures sufficient airflow for neighbouring components such as the water cooler and is still lightweight. The end boxes of our intercooler are made of high-quality cast aluminium and have been flow-optimised in the CAD system. This results in an optimised internal air flow and improved cooling performance. Thanks to integrated air baffles at the inlet, the charge air cooler is filled evenly. The result is outstanding cooling properties with minimal back pressure. Together with the original cross member, our intercooler forms a stable unit. Despite the new competition high-performance mesh, the weight remains low at just 11.2 kg. It is fitted to the original mounting points and is easy to install. A 1:1 replacement that enables immediate performance increases for your Audi RSQ3 2.5 TFSI. This kit is designed for racing and features a 66mm intake and exhaust to maximise the performance of your vehicle. All our products are subject to constant quality control. Discover the true performance of your Audi RSQ3 2.5 TFSI with our Competition Intercooler Evo 2 Kit. Advantages of the Wagner Tuning intercooler:- improved cooling performance- 87% larger inflow area- 70% more charge air volume- 66mm inlet and outlet- original mounting points for 1:1 replacement OEM intercooler:Cooling surface 832cm²charge air volume 9.15 litres Wagner Tuning EVO 2 Competition:Cooling surface 1560cm²charge air volume 15.6 litres Scope of delivery:1 intercooler together with the crossbar1 mounting material1 installation instruction Attention: Not authorised in the area of the StVZO.

3DDesign carbon spoiler for 8 Series F93 and G16 Compatible vehicles:BMW 8 Gran Coupe (G16, F93) M8 Since 2019BMW 8 Gran Coupe (G16, F93) M8 Competition since 2019

The Wagner Tuning Competition intercooler kit fits the following vehicles with the N20 engine:BMW F07/F10/F11 520i 2010+BMW F07/F10/F11 528i 2010+ The Wagner Tuning Competition intercooler - maximum performance, minimum effort! Ready to give your 5 Series (F10/F11/F18) an impressive performance boost? The Wagner Tuning Competition intercooler is the answer. With mesh dimensions of 500mm x 254mm x 110/55mm (stepped), this intercooler offers a massive 83% larger flow area and an impressive 62% more charge air volume compared to the stock intercooler. This allows your engine to take in more air, resulting in a noticeable and immediate increase in performance. Our Competition high performance mesh has been specifically designed to provide sufficient airflow to adjacent components such as the water cooler. Despite its outstanding performance, it remains lightweight and weighs only 7.4 kg. The CAD-developed free-form end boxes with cast aluminum inner baffles ensure the best possible internal airflow. This minimizes back pressure and maximizes the performance of your engine. In addition to its performance-enhancing function, this intercooler has an anti-corrosion coating with excellent heat conduction properties. This ensures optimum cooling, which leads to a further increase in performance. Installation is carried out by replacing the OEM intercooler and is straightforward. No complex modifications are required. Our products are subject to strict quality control procedures to ensure that they meet the highest standards. Advantages of the Wagner Tuning intercooler:- improved cooling performance- 83% larger inflow area- 62% more charge air volume- flow-optimized- uncomplicated replacement Get your 5 Series (F10/F11/F18) ready for the road. With the Wagner Tuning Competition intercooler you will experience an increase in performance like never before. Order now and feel the difference! Scope of delivery:1 intercooler1 assembly instructionAttention: Not approved in the area of the StVZO.

Facts: Power increase (RS3 with series turbo): 15-18hp, 19-23ft-lb Power increase (RS3 with hybrid turbo): 25-30hp, 20-24ft-lb Flow dyno data: Standard intake 530 CFM: Eventuri intake 840 CFM Material: Carbon fibre Manufacturer: Eventuri Parts certificate: Approval is available for this product for certain regions and vehicles (details below) Suitable for: F3 RSQ3, RSQ3 Fastback 2019+ Originally developed for the RS3 platform, we now also offer this intake for the RSQ3. This intake system has been developed to provide the highest possible flow rate while allowing the lowest possible intake temperatures. Each component has been designed to provide the turbo with a smooth and clear flow path. The intake tube has an internal diameter of 103mm or just over 4? and has a smooth bend from the filter housing to the turbo inlet. The filter itself has been specifically designed for this inlet and has a huge outer diameter of 210mm or 8.3? with a filter area of over 130,000mm^2. The patented Venturi housing has been designed to provide the maximum possible internal volume for the RSQ3 engine bay and provides laminar flow to the turbo pipe. Finally, the duct seals the filter opening at the windscreen, but is not restricted by the standard intake alone. We have raised the front of the duct to now create an additional opening behind the bonnet, which corresponds to an additional 7? diameter hole from which the intake manifold can be removed. The resulting system has the ability to flow 840 CFM at 28? H2O while keeping intake temperatures to a minimum with the sealed design. The Eventuri difference The F3 RSQ3 Eventuri system uses our patented carbon fibre housings that provide an aerodynamically efficient airflow path from the filter to the turbocharger pipe. Not just another cone filter with a heat shield, but a unique design that creates the Venturi effect. Flow bench tests We conducted flow tests with a Superflow SF-1020 to measure the maximum possible flow rate at a pressure drop of 28" H2O. The tests were performed on the same day under controlled conditions using the same test fixture for each system. We tested our complete intake system against the stock airbox system. The results show how restrictive the stock airbox is, which we were able to improve by up to 58% in maximum possible flow rate. Importantly, this was achieved with a sealed intake system so that intake temperatures are also kept to a minimum. Testing on the test bench Our Stage 3 intake has been tested by various renowned tuners worldwide who have built high performance RS3/TTRS projects for road and track use. The first results come from BR Performance Netherlands, who tested our system on a TTRS with a TTE700 hybrid turbo. The tests were carried out on the same day with the bonnet closed. They tested the stock airbox against our stage 3 intake and also with the addition of our 4" turbo inlet pipe, which is an additional product - details can be found on our Audi product page. Summary of the Dyno results: Standard airbox with modified standard turbo inlet for TTE700 = 576.5 hp Eventuri stage 3 intake with modified standard turbo inlet for TTE700 = 606.5 hp Eventuri stage 3 intake with Eventuri turbo inlet for TTE700 = 620.8 hp Parts certificate The manufacturer's specifications apply for installation. An existing certificate is no guarantee that the product can also be installed in the corresponding vehicle. A certificate is available for this product for the following regions and vehicles: * DE/AT: Vehicle registration document, field K --- CH/LI: Vehicle licence, field 24 Country Model Type approval* DE/AT Audi RS3 e1*xx/xx*0608*06 DE/AT Audi RS3 (8V) from e1*xx/xx*0608*06 DE/AT Audi RS3 (8V) e1*2007/46*0608*08 DE/AT Audi RS3 (8Y) e1*2007/xx*2144*.. DE/AT Audi RSQ3 (F3) e1*xx/xx*2038*.. DE/AT Audi TTRS (8J) e1*xx/xx*1686*.. DE/AT Cupra Formentor VZ5 e9*xx/xx*4008*.. Compatible vehicles:VehicleVehicle typePowerEngine capacityEngine type Audi Q3 (F3) 2019+RSQ3 quattro294kW / 400hp2480cm³DAZA, DNWA

3DDesign PUR front lip for the G05 with M-package Compatible vehicles:BMW X5 (G05, F95) xDrive 25 d 2019-2023BMW X5 (G05, F95) xDrive 30 d 2018-2020BMW X5 (G05, F95) xDrive 30 d Mild-Hybrid since 2020BMW X5 (G05, F95) xDrive 40 d Mild-Hybrid Since 2020BMW X5 (G05, F95) xDrive 40 i 2018-2023BMW X5 (G05, F95) xDrive 45 e plug-in hybrid 2019-2023BMW X5 (G05, F95) xDrive 50 i 2018-2019BMW X5 (G05, F95) xDrive M 50 d 2018-2023BMW X5 (G05, F95) xDrive M50 i 2019-2023BMW X5 Van (G05) xDrive 30 d 2019-2023BMW X5 Van (G05) xDrive 40 i 2019-2023

The intercooler upgrade kit is suitable for:Ford Fiesta ST180 1,6l EcoBoostFord Fiesta ST200 1.6l EcoBoost Maximize the performance of your Ford Fiesta ST180 or ST200 1.6l EcoBoost with our high performance intercooler upgrade kit! Your Ford Fiesta ST deserves the best, and our high performance intercooler kit will ensure you get just that. Here's what you can expect: With mesh dimensions of 670mm x 270mm x 70mm (stepped), our intercooler offers an amazing 100% larger flow area compared to the factory radiator. This means more fresh air for your engine and a noticeable increase in performance. More charge air volume: Our kit offers an astonishing 113% more charge air volume than the standard cooler. This leads to improved combustion and ultimately more power and efficiency. Quality meets lightness: Despite its impressive size, our intercooler weighs just 6.8 kg. The end boxes of the cooler are made of cast aluminium and have been optimized for the best possible internal airflow using CAD designs. This guarantees optimum airflow and minimizes back pressure. Optimum cooling: Our Competition high performance mesh is a high quality tube fin mesh with internal turbulators that provides excellent cooling properties. All our intercoolers have an anti-corrosion coating with excellent heat conduction properties to ensure long-lasting and optimal cooling. Easy installation: Our kit is designed for easy installation and is a plug-and-play upgrade. You can easily replace your original intercooler with our kit. No complex adjustments required. Our kit is ideal for racing and has been developed to meet the high demands of Ford Fiesta ST180 and ST200 drivers. We subject all our products to rigorous quality control to ensure they meet the highest standards. Don't miss the chance to take the performance of your Ford Fiesta ST to a new level. Visit our website for more information and to order your kit. Advantages of the Wagner Tuning intercooler:- improved cooling performance- 100% larger inflow area- 113% more charge air volume- Minimal back pressure- Plug & Play upgrade Dimensions original intercooler:690mmx130mmx50mmV=4,5literA=900qcm Dimensions Wagner Tuning EVO1 intercooler:670mmx270mmx70mm/gestuftV=9,6literA=1800qcm Scope of delivery:1 intercooler black coated1 mounting material1 installation instructionAttention: Not approved in the area of the StVZO.