Side Skirt Extension Performance Carbon | fits BMW M2 incl. Competition (F87) N55/S55 | Aulitzky Tuning

The prepreg carbon front canards are suitable for pre-facelift and facelift models.Details:- 100% pure pre-preg carbon fibre construction- OEM style carbon fibre- High gloss finish- Perfect fit- With parts certificate according to §19.3 Compatible vehicles:- BMW F87 2 Series M2 (2016-2018) - BMW F87 2 Series M2 Competition (2018-2021) Note: This is NOT an original BMW product!

KW coilover springs The spring set with stepless lowering KW coilover springs are used to lower the vehicle in combination with the standard dampers. In contrast to conventional spring sets, individual height adjustment is possible within the tested adjustment range. This solution uses vehicle-specific spring mounts with matched KW lowering springs and suitable elastomers as well as dust protection systems. The standard damper system, for example with electronic or hydraulic control, remains active. Setup - sporty and harmonious spring rates The high-quality chrome-silicon steel springs used by KW coilover springs are matched to the respective standard suspension dampers and wheel loads in their spring rate for each specific vehicle. When developing the respective spring sets, we ensure that the spring rates also harmonise perfectly with the different damper characteristics of your adaptive standard suspension. So even with a KW coilover spring set, you will experience your car more directly and dynamically. KW coilover springs are suitable for car drivers who want to lower their vehicle discreetly and take advantage of an individual adjustment range. Stepless lowering Similar to a coilover suspension, the KW coilover springs allow a stepless lowering in a discreet range. This is not possible with conventional lowering springs. The dust protection elements and spring travel limiters included in the scope of delivery are always adapted to the maximum possible lowering. This means that the height-adjustable KW springs can be used to achieve a sporty, harmonious driving behaviour without compromising the driving dynamics of performance-oriented vehicles. Please note the conditions and instructions for this product: - VA + HA height-adjustable (spring set consisting of VA+HA springs with height adjustment, can only be used with standard dampers) Technical information: Lowering VA/HA (mm): 15-40/0-25 Adjustment HA: Thread Approval: Parts certificate (§19.3) Scope of delivery: Set (VA+HA) Compatible vehicles: Manufacturer Model Version Body Fuel Performance Displacement Cylinder Drive AUDI A4 Avant (8E) 8ED, QB6, B7 11/2004-06/2008 RS4 quattro station wagon Petrol 309 KW 4163 ccm 8 All-wheel drive AUDI A4 B7 Cabriolet (8HE) 01/2002-12/2009 RS4 quattro Cabriolet Petrol 309 KW 4163 ccm 8 All-wheel drive

KW V3 coilover suspension Unlimited individuality for performance & comfort. Separate damper force adjustment for rebound and compression damping.As with every KW coilover suspension, our suspension engineers also develop a sporty and harmonious basic set-up for the vehicle-specific applications of the KW V3. In addition to tests on our KW 7-post driving dynamics test bench, we also carry out extensive test drives on country roads, the motorway and even on the Nürburgring Nordschleife, kilometre by kilometre, to guarantee you the perfect suspension set-up. For years, the KW V3, one of the world's top aftermarket products, has been the reference for coilover suspensions. With its damper characteristics, high-quality workmanship and excellent durability, it has impressed discerning sports car drivers, tuners, large and small series manufacturers such as Alpina, MTM, Manthey, Oettinger and many other well-known companies in the international automotive industry. Cutting-edge technology from motorsportYou get much more than a sporty lowering and excellent handling on all roads with the KW V3. It is based on our many years of experience as a suspension manufacturer and supplier in international motorsport, such as in the ADAC GT Masters touring car series, FIA GT1, FIA GT3, International GT Open, WTC, VLN and also in the legendary ADAC Zurich 24h Race Nürburgring.Similar to our racing coilovers from the KW Competition programme, the rebound and compression damping of the KW V3 can be adjusted independently of each other. This individual tuning option is appreciated by tuners, sports car manufacturers, tuners and demanding drivers worldwide. The perfect suspension setup for significantly more driving dynamicsIf you have already carried out initial performance modifications to your sporty road vehicle, it is easy to incorporate these into the damper set-up in a targeted manner with the KW V3. The patented KW valve technology for the separate adjustment of the rebound and compression damping allows you to customise the vehicle-specific basic set-up from KW. For example, the KW bottom valve, which can be adjusted in twelve clicks in the low-speed range of the compression stage, gives you the freedom to even take the tyre characteristics of your high and ultra-high performance road tyres into account in the suspension set-up.Thanks to the patented compression adjustment at the lower piston end of the stainless steel housing, you don't even need any tools. The adjustable compression adjustment with its twelve precise clicks allows you to influence body roll and body roll movements by hand without having to change the rebound damping to match the spring rate.With the individually adjustable rebound damping of the KW V3, you can directly influence the handling and comfort through the exact click adjustment. Depending on the vehicle type, the rebound valves of the KW twin-tube dampers are adjusted at the upper end of the piston rod via an integrated adjustment wheel or the slip-on adjustment wheel included in the scope of delivery.By increasing the rebound force via the adjustment wheel, the body movements on the body are reduced. As a result, your car tracks more accurately and you have even more stability at higher cornering speeds. If, for example, you change from the approved wheel/tyre combinations of your car manufacturer to larger rims, you can use the KW V3 to perfectly match the handling of your car and your new alloy wheels. High-quality, customised and durableThe KW V3 is subjected to extensive quality tests during production and every single damper is checked. This is the only way we can fulfil our claim to provide a warranty of up to five years when a KW coilover suspension V3 is installed by a KW specialist dealer. Due to the filigree workmanship and the use of high-quality components, the KW coilover struts made of stainless steel, for example, are 100 per cent rust-free and have an unlimited service life.This means that the functionality of the stepless lowering system via the dirt-resistant KW trapezoidal thread and the KW polyamide threaded ring is not impaired even after many years. Thanks to the individual lowering with its stepless adjustment range, you can also emphasise the sportiness of your vehicle visually. A feature that is very popular in the performance-orientated tuning scene. - Freely adjustable damping technology in rebound and compression damping- inox-line stainless steel technology- Individual, stepless lowering- Tested adjustment range- high-quality components for a long service life- adjustable rebound damping with 16 exact clicks- 12-way adjustable compression damping with click adjustment- Unique, independently acting damping force adjustment Setup: The individually adjustable rebound & compression damping of the KW V3The KW V3 is the ideal accessory for performance-orientated drivers and tuning enthusiasts who demand a high level of sportiness from their vehicles. The dampers, which are separately adjustable in rebound and compression, allow extensive damper tuning with their sophisticated click adjustment. This makes it easy to directly influence the turn-in behaviour, directional stability, tyre grip and handling characteristics for safe controllability at the limit. Please note the conditions and instructions for this product: - VA + HA height adjustable (VA coilover struts, HA springs with height adjustment + damper) - When used with standard wheel/tyre combinations, additional standard wheel spacers from the accessories may be required Technical information: Lowering VA/HA (mm): 10-40/15-45 Design: V3 Hardness adjustment: Rebound and compression Material: Stainless steel Adjustment VA/HA: Thread/thread Approval: Parts certificate (§19.3) Compatible vehicles: Manufacturer Model Version Body Fuel Performance Displacement Cylinder Drive FORD FOCUS II (DA_) 07/2004-09/2013 2.5 ST Hatchback Petrol 166 KW 2522 ccm 5 Front-wheel drive

Facts: - replaces the main catalyst - with 200 cell stainless steel sports catalyst - Euro 6 compatible - with ECE approval* Compatible Vehicles: VehicleVehicle typePowerEngine capacityEngineYear of construction VW Golf Mk 7GTI162kW / 220hp1984cm³CHHB, CXDA, CXCB, CNTC02.13 - 02.17 VW Golf Mk 7GTI Performance169kW / 230hp1984cm³CHHA04.13 - 02.17 VW Golf Mk 7GTI Clubsport195kW / 265hp1984cm³CJXE02.16 - 03.17 VW Golf Mk 7.5 FaceliftGTI169kW / 230hp1984cm³CHHA02.17 - 08.18 Note: Depending on the software version, the engine indicator light may light up. We recommend adjusting the software in this case.*This downpipe has ECE approval so that it can be used within the scope of the StVZO without registration in the vehicle documents.