Lowering springs Pro-Kit Performance VA+HA 30mm | fits BMW M2 (G87) S58 | Eibach

ST wheel nuts & wheel bolts We recommend ST wheel bolts in black for fitting the D1, D2, DZ and DZX systems. The wheel bolts must be selected longer by the thickness of the spacer disc. The type of bolt head and thread must also be taken into account. Important note! The minimum screw-in depth of the wheel bolts must be observed in all cases: - M12x1.25 min. 8.0 turns- M12x1.5 at least 6.5 turns- M12x1.75 at least 6.5 turns- M14x1.25 min. 9.0 turns- M14x1.5 min. 7.5 turns- M15x1.25 min. 10.0 turns- 1/2" min. 8.0 turns Caution:If the wheel bolt is too long, the axle parts may be damaged! Technical information:Item number: 56110259Short description: Wheel bolt M14x1.25x40mm KE60° black (10 pcs.)Colour: blackApproval: Registration-freeScope of delivery: Set (10 pcs.) in boxDesign: Cone 60°Product: Wheel boltThread: M14x1.25Shank length: 40mmKey width: 17mmcollar: tapered collarProduct category: Wheel bolts / Rim locksBrand: ST

The SOOQOO front canards made of pre-preg Carbon fiber give your vehicle a distinctly sporty aggressivenessDetails:- Constructed from 100% pure pre-preg carbon fibre- OEM style weave- High-gloss finish- Perfect fit- registration according to §21 possible Scope of delivery:1x front spoiler in prepreg carbon fibre Compatible vehicles:BMW M5 G90BMW M5 G99 TouringNote: This is NOT an original BMW product!

KW coilover springs The spring set with stepless lowering KW coilover springs are used to lower the vehicle in combination with the standard dampers. In contrast to conventional spring sets, individual height adjustment is possible within the tested adjustment range. This solution uses vehicle-specific spring mounts with matched KW lowering springs and suitable elastomers as well as dust protection systems. The standard damper system, for example with electronic or hydraulic control, remains active. Setup - sporty and harmonious spring rates The high-quality chrome-silicon steel springs used by KW coilover springs are matched to the respective standard suspension dampers and wheel loads in terms of their spring rate. When developing the respective spring sets, we ensure that the spring rates also harmonise perfectly with the different damper characteristics of your adaptive standard suspension. So even with a KW coilover spring set, you will experience your car more directly and dynamically. KW coilover springs are suitable for car drivers who want to lower their vehicle discreetly and take advantage of an individual adjustment range. Stepless lowering Similar to a coilover suspension, the KW coilover springs allow a stepless lowering in a discreet range. This is not possible with conventional lowering springs. The dust protection elements and spring travel limiters included in the scope of delivery are always adapted to the maximum possible lowering. This means that the height-adjustable KW springs can be used to achieve a sporty, harmonious driving behaviour without compromising the driving dynamics of performance-oriented vehicles. Please note the conditions and instructions for this product: - VA + HA height-adjustable (spring set consisting of VA+HA springs with height adjustment, can only be used with standard dampers) Technical information: Lowering VA/HA (mm): 0-20/0-20 Adjustment VA/HA: thread/thread Approval: Parts certificate (§19.3) Scope of delivery: Set (VA+HA) Compatible vehicles: Manufacturer Model Version Body Fuel Performance Displacement Cylinder Drive BMW 2 Series Coupe (F22, F87) 1C, M3 10/2012- M2 Coupe Petrol 272 KW 2979 ccm 6 Rear-wheel drive BMW 2 Series Coupe (F22, F87) 1C, M3 10/2012- M2 Competition CoupePetrol 302 KW 2979 ccm 6 rear-wheel drive BMW 2 Series Coupe (F22, F87) 1C, M3 10/2012- M2 CS Coupe Petrol 331 KW 2979 ccm 6 rear-wheel drive BMW 3 Series (F30, F80) 3-HY, 3L, M3, M3 GTS 03/2011-10/2018 M3 NotchbackPetrol 317 KW 2979 ccm 6 rear-wheel drive BMW 3 Series (F30, F80) 3-HY, 3L, M3, M3 GTS 03/2011-10/2018 M3 CompetitionNotchback petrol 331 KW 2979 ccm 6 rear-wheel drive BMW 3 Series (F30, F80) 3-HY, 3L, M3, M3 GTS 03/2011-10/2018 M3 CS notchbackPetrol 338 KW 2979 ccm 6 rear-wheel drive BMW 4 Series Coupe (F32, F82) 3C, M3, M3 GTS 07/2013- M4 CoupePetrol 317 KW 2979 ccm 6 rear-wheel drive BMW 4 Series Coupe (F32, F82) 3C, M3, M3 GTS 07/2013- M4 Competition CoupePetrol 331 KW 2979 ccm 6 rear-wheel drive BMW 4 Series Coupe (F32, F82) 3C, M3, M3 GTS 07/2013- M4 CS CoupePetrol 338 KW 2979 ccm 6 rear-wheel drive

KW coilover springs The spring set with stepless lowering KW coilover springs are used to lower the vehicle in combination with the standard dampers. In contrast to conventional spring sets, individual height adjustment is possible within the tested adjustment range. This solution uses vehicle-specific spring mounts with matched KW lowering springs and suitable elastomers as well as dust protection systems. The standard damper system, for example with electronic or hydraulic control, remains active. Setup - sporty and harmonious spring rates The high-quality chrome-silicon steel springs used by KW coilover springs are matched to the respective standard suspension dampers and wheel loads in their spring rate for each specific vehicle. When developing the respective spring sets, we ensure that the spring rates also harmonise perfectly with the different damper characteristics of your adaptive standard suspension. So even with a KW coilover spring set, you will experience your car more directly and dynamically. KW coilover springs are suitable for car drivers who want to lower their vehicle discreetly and take advantage of an individual adjustment range. Stepless lowering Similar to a coilover suspension, the KW coilover springs allow a stepless lowering in a discreet range. This is not possible with conventional lowering springs. The dust protection elements and spring travel limiters included in the scope of delivery are always adapted to the maximum possible lowering. This means that the height-adjustable KW springs can be used to achieve a sporty, harmonious driving behaviour without compromising the driving dynamics of performance-oriented vehicles. Please note the conditions and instructions for this product: - When used with standard wheel/tyre combinations, additional commercially available track wideners from the accessories may be required - VA + HA height-adjustable (spring set consisting of VA+HA springs with height adjustment, can only be used with standard dampers) Technical information: Lowering VA/HA (mm): 15-30/10-25 Adjustment VA/HA: thread/thread Approval: Parts certificate (§19.3) Scope of delivery: Set (VA+HA) Compatible vehicles: Manufacturer Model Version Body Fuel Performance Displacement Cylinder Drive BMW 2 Series Coupe (G42, G87) 08/2021- M2 Coupe petrol 338 KW 2993 ccm 6 rear-wheel drive BMW 3 Series (G20, G80) G3L 11/2018- M3 notchback petrol 353 KW 2993 ccm 6 rear-wheel drive BMW 3 Series (G20, G80) G3L 11/2018- M3 Competition notchback petrol 375 KW 2993 ccm 6 rear-wheel drive BMW 3 Series (G20, G80) G3L 11/2018- M3 COMPETITION M XDRIVE notchback petrol 375 KW 2993 ccm 6 all-wheel drive BMW 3 Series (G20, G80) G3L 11/2018- M3 CS xDrive notchback petrol 405 KW 2993 ccm 6 all-wheel drive BMW 4 Series Coupe (G22, G82) 07/2020- M4 Coupe petrol 353 KW 2993 ccm 6 rear-wheel drive BMW 4 Series Coupe (G22, G82) 07/2020- M4 Competition Coupe petrol 375 KW 2993 ccm 6 rear-wheel drive BMW 4 Series Coupe (G22, G82) 07/2020- M4 Competition M xDrive Coupe petrol 375 KW 2993 ccm 6 all-wheel drive

KW coilover springs The spring set with stepless lowering KW coilover springs are used to lower the vehicle in combination with the standard dampers. In contrast to conventional spring sets, individual height adjustment is possible within the tested adjustment range. This solution uses vehicle-specific spring mounts with matched KW lowering springs and suitable elastomers as well as dust protection systems. The standard damper system, for example with electronic or hydraulic control, remains active. Setup - sporty and harmonious spring rates The high-quality chrome-silicon steel springs used by KW coilover springs are matched to the respective standard suspension dampers and wheel loads in their spring rate for each specific vehicle. When developing the respective spring sets, we ensure that the spring rates also harmonise perfectly with the different damper characteristics of your adaptive standard suspension. So even with a KW coilover spring set, you will experience your car more directly and dynamically. KW coilover springs are suitable for car drivers who want to lower their vehicle discreetly and take advantage of an individual adjustment range. Stepless lowering Similar to a coilover suspension, the KW coilover springs allow a stepless lowering in a discreet range. This is not possible with conventional lowering springs. The dust protection elements and spring travel limiters included in the scope of delivery are always adapted to the maximum possible lowering. This means that the height-adjustable KW springs can be used to achieve a sporty, harmonious driving behaviour without compromising the driving dynamics of performance-oriented vehicles. Please note the conditions and instructions for this product: - Not for vehicles with level control / air suspension - Only for vehicles with electronic damper control - VA + HA height-adjustable (spring set consisting of VA+HA springs with height adjustment, can only be used with standard dampers) Technical information: Lowering VA/HA (mm): 10-35/10-35 Adjustment HA: Thread Approval: Parts certificate (§19.3) Scope of delivery: Set (VA+HA) Compatible vehicles: Manufacturer Model Version Body Fuel Performance Displacement Cylinder Drive AUDI Q5 (FY) FYB 05/2016- 2.0 TDI quattro SUV Diesel 120 KW 1968 ccm 4 Allrad AUDI Q5 (FY) FYB 05/2016- 2. 0 TDI quattro SUV Diesel 140 KW 1968 ccm 4 All-wheel AUDI Q5 (FY) FYB 05/2016- 2.0 TFSI quattro SUV Petrol 183 KW 1984 ccm 4 All-wheel AUDI Q5 (FY) FYB 05/2016- 2. 0 TFSI quattro SUV Petrol 185 KW 1984 ccm 4 All-wheel drive AUDI Q5 (FY) FYB 05/2016- 3. 0 TDI quattro SUV Diesel 210 KW 2967 ccm 6 All-wheel drive AUDI Q5 (FY) FYB 05/2016- 35 TDI quattro SUV Diesel 120 KW 1968 ccm 4 All-wheel drive AUDI Q5 (FY) FYB 05/2016-     40 TDI Mild Hybrid quattro SUV Diesel/Electric 150 KW 1968 ccm 4 All-wheel drive AUDI Q5 (FY) FYB 05/2016- 40 TDI quattro SUV Diesel 140 KW 1968 ccm 4 all-wheel drive AUDI Q5 (FY) FYB 05/2016- 40 TFSI Mild Hybrid quattro SUV Petrol/electric 150 KW 1984 ccm 4 all-wheel drive AUDI Q5 (FY) FYB 05/2016- 45 TDI quattro SUV Diesel 170 KW 2967 ccm 6 all-wheel drive AUDI Q5 (FY) FYB 05/2016-     45 TFSI Mild Hybrid quattro SUV Petrol/electric 180 KW 1984 ccm 4 all-wheel drive AUDI Q5 (FY) FYB 05/2016- 45 TFSI Mild Hybrid quattro SUV Petrol/electric 195 KW 1984 ccm 4 all-wheel drive AUDI Q5 (FY) FYB 05/2016- 50 TDI Mild Hybrid quattro SUV Diesel/electric 210 KW 2967 ccm 6 all-wheel drive AUDI Q5 (FY) FYB 05/2016-     50 TDI quattro SUV Diesel 210 KW 2967 ccm 6 All-wheel drive AUDI Q5 (FY) FYB 05/2016- SQ5 TDI SUV Diesel/Electric 251 KW 2967 ccm 6 All-wheel drive AUDI Q5 (FY) FYB 05/2016- SQ5 TDI Mild Hybrid quattro SUV Diesel/Electric 255 KW 2967 ccm 6 All-wheel drive AUDI Q5 (FY) FYB 05/2016- SQ5 TFSI Mild Hybrid quattro SUV Petrol/electric 260 KW 2995 ccm 6 All-wheel drive AUDI Q5 (FY) FYB 05/2016- SQ5 TFSI quattro off-road vehicle closed Petrol 260 KW 2995 ccm 6 All-wheel drive AUDI Q5 Sportback (FYT) 11/2020-     40 TDI quattro SUV diesel/electric 150 KW 1968 ccm 4 all-wheel drive AUDI Q5 Sportback (FYT) 11/2020- 40 TFSI Mild Hybrid quattro SUV petrol/electric 150 KW 1984 ccm 4 all-wheel drive AUDI Q5 Sportback (FYT) 11/2020-     45 TFSI quattro SUV petrol/electric 195 KW 1984 ccm 4 all-wheel drive AUDI Q5 Sportback (FYT) 11/2020- 50 TDI quattro SUV diesel/electric 210 KW 2967 ccm 6 all-wheel drive AUDI Q5 Sportback (FYT) 11/2020-     SQ5 TDI SUV diesel/electric 251 KW 2967 ccm 6 all-wheel drive AUDI Q5 Sportback (FYT) 11/2020- SQ5 TFSI quattro SUV petrol 260 KW 2995 ccm 6 all-wheel drive AUDI Q5 Sportback (FYT) 11/2020- SQ5 TFSI quattro SUV petrol/electric 260 KW 2995 ccm 6 all-wheel drive

KW coilover springs The spring set with stepless lowering KW coilover springs are used to lower the vehicle in combination with the standard dampers. In contrast to conventional spring sets, individual height adjustment is possible within the tested adjustment range. This solution uses vehicle-specific spring mounts with matched KW lowering springs and suitable elastomers as well as dust protection systems. The standard damper system, for example with electronic or hydraulic control, remains active. Setup - sporty and harmonious spring rates The high-quality chrome-silicon steel springs used by KW coilover springs are matched to the respective standard suspension dampers and wheel loads in their spring rate for each specific vehicle. When developing the respective spring sets, we ensure that the spring rates also harmonise perfectly with the different damper characteristics of your adaptive standard suspension. So even with a KW coilover spring set, you will experience your car more directly and dynamically. KW coilover springs are suitable for car drivers who want to lower their vehicle discreetly and take advantage of an individual adjustment range. Stepless lowering Similar to a coilover suspension, the KW coilover springs allow a stepless lowering in a discreet range. This is not possible with conventional lowering springs. The dust protection elements and spring travel limiters included in the scope of delivery are always adapted to the maximum possible lowering. This means that the height-adjustable KW springs can be used to achieve a sporty, harmonious driving behaviour without compromising the driving dynamics of performance-oriented vehicles. Please note the conditions and instructions for this product: - Only for vehicles with electronic damper control - VA + HA height-adjustable (spring set consisting of VA+HA springs with height adjustment, can only be used with standard dampers) Technical information: Lowering VA/HA (mm): 5-30/5-30 Adjustment HA: Thread Approval: Parts certificate (§19.3) Scope of delivery: Set VA + HA Compatible vehicles: Manufacturer Model Version Body Fuel Performance Displacement Cylinder Drive AUDI A6 Avant (F2) C8, 4A5 05/2018- RS6 Mild Hybrid quattro Combi Petrol/Electric 441 KW 3996 ccm 8 All-wheel AUDI A6 Avant (F2) C8, 4A5 05/2018- RS6 Mild Hybrid quattro estate petrol/electric 463 KW 3996 ccm 8 all-wheel drive AUDI A7 Sportback (F2) 4KA 10/2017- RS7 Mild Hybrid quattro hatchback petrol/electric 441 KW 3996 ccm 8 all-wheel drive AUDI A7 Sportback (F2) 4KA 10/2017- RS7 Mild Hybrid quattro hatchback petrol/electric 463 KW 3996 ccm 8 all-wheel drive