KW V5 Clubsport coilover suspension | fits Mercedes-Benz AMG GT GTR 585hp (C190) | 309012500C

Our high-quality and large engine cover made of pre-preg carbon fibre is a great addition to enhance the style of your vehicle. The carbon fibre engine cover replaces the standard plastic part. When you buy Pre-Preg carbon fibre, you are investing in a higher quality and more durable material that will outlast other forms of carbon fibre and potentially save you money in the long run. Installation: Plug&Play Details:- 100% carbon fibre construction- High gloss finish- Performance style design- Supplied with 3M double-sided adhesive tape already attached- Use rubber adapter from the original engine cover + emblem- registration free Compatible vehicles with S58 engine:- BMW G87 M2 - BMW G80 M3 Sedan (2021+)- BMW G80 M3 Competition Sedan (2021+)- BMW G81 M3 Touring (2023+)- BMW G81 M3 Competition Touring (2023+)- BMW G82 M4 Coupé (2021+)- BMW G82 M4 Competition Coupé (2021+)- BMW G83 M4 Convertible (2021+)- BMW G83 M4 Competition Convertible (2021+) Note: This is NOT an original BMW product!

The side centre consoles give your vehicle an upscale look and feel. When you buy Pre-Preg carbon fibre, you are investing in a higher quality and more durable material that will outlast other forms of carbon fibre and potentially save you money in the long run. Details:- 100% carbon fibre construction- High gloss finish- Fit guarantee- registration free Scope of delivery:1x set of centre console side covers (1x right / 1x left) Compatible vehicles:- BMW G87 M2 - BMW G80 M3 incl. Competition Saloon (2021+)- BMW G81 M3 incl. Competition Touring (2023+)- BMW G82 M4 incl. Competition Coupé (2021+)- BMW G83 M4 incl. Competition Convertible (2021+) Note: This is NOT an original BMW product!

KW V1 coilover suspension Sportiness paired with outstanding looks. With factory pre-configured damping.Our entry-level model for more driving pleasure through an appealing and individually adjustable lowering is the KW V1 coilover suspension in the KW typical "inox-line". Thanks to its high-quality workmanship, the consistent use of stainless steel struts, corrosion-resistant springs and harmonised components, it stands for many years of driving pleasure - and not just for the life of the car. Stepless loweringThe KW V1 enables maximum lowering within the tested adjustment range. This varies depending on the vehicle model and can, for example, be between 30 and 70 millimetres or 50 to 90 millimetres for an individual lowering. Thanks to the dirt-resistant trapezoidal thread and the polyamide threaded ring, the stepless lowering can be varied quickly and easily even years later. Depending on the vehicle, the lowering is carried out either on the wheel-guiding KW stainless steel suspension struts or on the rear axle height adjustment for non-wheel-guiding double-wishbone rear axles. The benchmark for sporty, dynamic tuning fansWith its harmonious basic set-up for sporty driving on the road, the KW V1 convinces the discerning tuning fan. Our development engineers determine a specific damper set-up and spring rate for each vehicle in order to increase your driving pleasure with the optimum balance of sportiness and suitability for everyday use. After all, you are not buying just any coilover suspension, but a KW coilover suspension that has been specially developed and tuned for your vehicle type. As a manufacturer, KW only uses its own resources, high-quality components and the same damper technology as mass-produced manufacturers. With the KW V1, the rolling and rolling movements of the vehicle body are reduced during compression, allowing you to benefit from unadulterated directness and sportier handling when driving. Our experience for your driving pleasureAs a manufacturer of customised suspension solutions for road and racing, we have been the market leader and innovation driver for over 25 years. No matter where in the world, sporty drivers, car manufacturers and tuners rely on our KW coilovers "Made in Germany". Every KW coilover suspension is subjected to extensive load tests during production and is developed and manufactured directly at our company headquarters in Fichtenberg, Swabia, in order to fulfil the high standards of our KW quality management. As a German manufacturer, it is a matter of course for us to provide a multi-year warranty on our KW coilover suspension kits, which exceed OEM quality and cover over 4,600 applications. When installed by one of our KW specialist dealers, this warranty is valid for up to five years. - Optimally adjusted in advance- sporty and harmonious damping technology- Stainless steel technology "inox-line"- Individually height-adjustable- Tested adjustment range- Ready-to-install complete solution- High-quality components for a long service life- Complete documentation for easy handling Setup - factory pre-configured damping setupThe KW V1 has a vehicle-specific, permanently configured damper setup. The spring and the damper are perfectly matched to each other so that you experience an optimum balance of sportiness and suitability for everyday use when driving. Even with a full payload and maximum axle loads, the dampers always work with a sporty characteristic curve. The KW V1 is particularly interesting for tuning enthusiasts who prioritise the show & shine concept. Please note the conditions and instructions for this product: - VA + HA height adjustable (VA coilover struts, HA springs with height adjustment + damper) - With variant 2 or variant 3, hardness adjustment also possible on the VA only when removed! Technical information: Lowering VA/HA (mm): 15-45/10-30 Version: V1 Hardness adjustment: none Material: stainless steel Adjustment VA/HA: thread/thread Approval: parts certificate (§19.3) Compatible vehicles: Manufacturer Model Version Body Fuel Performance Displacement Cylinder Drive AUDI A4 (8E) 8EC, QB6, B7 11/2004-06/2008 RS4 quattro notchback Petrol 309 KW 4163 ccm 8 All-wheel drive

FITS ONLY THE EVENTURI INLET SYSTEM: Mercedes A35 AMG, CLA35 AMG, A250, CLA250 | 177, 118 The Mercedes A35 Eventuri turbo pipe was developed to offer the turbo a less restrictive flow path compared to the standard pipe. We have succeeded in increasing the internal volume and eliminating the corrugated, flexible section on the airbox side. By using a completely solid pipe all the way from the intake tract to the turbo, the flow path is smoother and the airflow can remain more laminar. To accommodate the movement of the engine, our A35 intake has a "floating" pipe that can move within the airbox. The shape of the carbon tube on the turbo side has been optimised using CFD to minimise turbulence. The connection to the turbo is achieved by an innovative silicone coupling, which has an internal thermal separator between the carbon pipe and the metal turbo housing. The multiple vent ports at the rear of the pipe are done with a CNC machined block that also provides a smooth internal surface for airflow within the pipe. The Eventuri A35-A250 turbo inlet pipe is made from prepreg carbon fibre and comes with a range of other components designed for a specific purpose and manufactured to the highest standards. It is available to fit the A35, CLA35 and A250. The inlet pipe is only suitable for our intake system. Each intake system consists of: Prepreg carbon pipe CNC-milled breather block CNC-milled MAP boss CNC-milled breather nozzle CNC-milled reinforcement ring Laser-cut bracket Silicone couplings with oil-resistant lining Marine grade stainless steel hose clamps Compatible vehicles:VehicleTypePowerEngine capacityEngine typeYear of construction Mercedes A-Class (W177/V177)A250 / 4-matic165kW / 224hp1991cm³M 260.92003.18 - Mercedes A-Class (W177/V177)A35 AMG 4-matic225kW / 306hp1991cm³M 260.92009.18 - Mercedes CLA (C118/X118)A250 / 4-matic165kW / 224hp1991cm³M 260.92003.19 - Mercedes CLA (C118/X118)CLA35 AMG 4-matic225kW / 306hp1991cm³M 260.92004.19 -