KW V4 coilover suspension | fits BMW M3/M4 (F80/F82) incl. Competition/CS | 3A7200AN | 3A7200AP

KW coilover suspension DDC ECU KW Dynamic Damping Control ECU Individuality at the touch of a button.The KW DDC coilovers are the intelligent suspension solution for retrofitting from the KW iSuspension product range. They combine the advantages of an adaptive damping system with a vehicle-specific sporty and harmonious damper characteristic with a stylish and sporty lowering. The adaptive KW coilovers are available in the KW DDC ECU version with optional app control for vehicles without actively controlled standard suspension and as KW DDC Plug & Play version for selected vehicle models with adaptive standard suspension.The adaptive KW DDC ECU coilovers allow a stepless lowering in the tested adjustment range. Thanks to the dirt-resistant trapezoidal thread and the polyamide threaded ring, the stepless lowering can be varied quickly and easily even after years. Depending on the vehicle, lowering takes place either on the wheel-guiding KW stainless steel suspension struts or, in the case of non-wheel-guiding double-wishbone rear axles, on the rear axle height adjustment. No matter where in the world, sporty drivers, car manufacturers and tuners rely on our KW technology "Made in Germany".Every KW coilover suspension is subjected to extensive load tests during production and is developed and manufactured directly at our company headquarters in Fichtenberg, Swabia, in order to fulfil the high standards of our KW quality management. As a German manufacturer, it is a matter of course for us to provide a multi-year warranty on our KW coilover suspension kits, which exceed OEM quality and cover over 4,600 applications. It is up to five years when installed by one of our KW specialist dealers. The adaptive KW DDC ECU coilovers with app control are currently available for Audi, BMW, Mercedes-Benz, Porsche, VW and many other vehicles such as the Range Rover Evoque. - retrofittable electronic damper adjustment, combined with the advantages of a KW coilover suspension- with optional app control- Three damping setups: Comfort / Sport / Sport +- Operation via retrofit button or optional app- Create your own setups intuitively via KW DDC app KW DDC button - 1x button, 3x learn moreThe scope of delivery of the KW DDC ECU coilover kit also includes a KW DDC button. This allows you to select the KW DDC driving modes "Comfort", "Sport" and "Sport+" directly from the cockpit. The KW DDC button changes the colour to match the KW DDC APP. W-LAN module & app controlOptionally available app control for live suspension tuning via iPhone, iPod Touch, iPad.Experience top-class innovation and quality "Made in Germany": the KW DDC (Dynamic Damping Control) coilover suspension with ECU (Electronic Control Unit). The coilover suspension with its electronically adjustable dampers enables intelligent suspension tuning via app control and is already available for numerous vehicles without adaptive standard suspension.This allows you to upgrade your vehicle with adaptive damper control and optionally adapt it to your driving style via the KW DDC app. You do not need any tools or have to work on the dampers yourself.The free KW DDC App in combination with our optionally available W-Lan module is your tool to carry out an individual damper tuning live and in real time. Please note the conditions and instructions for this product:- VA + HA height-adjustable (VA coilover struts, HA springs with height adjustment + damper) Technical information:Lowering VA/HA (mm):5-30/0-30Version: DDC - ECUHardness adjustment: Rebound and compression stageMaterial: Stainless steelAdjustment VA/HA: thread/threadApproval: Parts certificate (§19.3) Compatible vehicles:Manufacturer Model Version Body Fuel Performance Displacement Cylinder DriveMERCEDES-BENZ C-KLASSE T-Model (S204) 204 K, 204 K AMG 08/2007-08/2014 C 63 AMG Estate Petrol 373 KW 6208 ccm 8 Rear-wheel driveMERCEDES-BENZ C-KLASSE T-Model (S204) 204 K, 204 K AMG 08/2007-08/2014 C 63 AMG Estate Petrol 383 KW 6208 ccm 8 Rear-wheel driveMERCEDES-BENZ C-CLASSE T-Model (S204) 204 K, 204 K AMG 08/2007-08/2014 C 63 AMG (204.277) Estate Petrol 336 KW 6208 ccm 8 Rear-wheel driveMERCEDES-BENZ C-CLASSE T-Model (S204) 204 K, 204 K AMG 08/2007-08/2014 C 63 AMG (204.277) Estate petrol 358 KW 6208 ccm 8 rear-wheel drive

To increase strength and durability, prepreg carbon fibre is reinforced in contrast to normal carbon fibre and can still be 70% lighter than other carbon options. A decisive advantage in terms of weight saving. Prepreg carbon fibre is far more consistent in quality, so the likelihood of imperfections is greatly reduced. The manufacturing process eliminates unwanted air bubbles and results in a perfectly smooth and high-gloss finish. Key features:- 100% pure prepreg carbon fibre- OEM style weave- High gloss finish- Fitment guarantee- 1 year warranty - With parts certificate according to §19.3 Scope of delivery:1x CS front spoiler made of glossy prepreg carbon fiber incl. mounting material Compatible vehicles:BMW G80 M3 Sedan (2021+)BMW G80 M3 Competition Saloon (2021+)BMW G81 M3 Touring (2023+)BMW G81 M3 Competition Touring (2023+)BMW G82 M4 Coupe (2021+)BMW G82 M4 Competition Coupe (2021+)BMW G83 M4 Convertible (2021+)BMW G83 M4 Competition Convertible (2021+) Note: This is NOT an original BMW product!

Designed and engineered with the OEM standard as the frame, these AutoTecknic dry carbon fibre wing trims are made with 100% dry carbon fibre composite material and fused with abs tabs that result in strong tabs throughout the durable construction for a secure and seamless fit. As an AutoTecknic standard, each trim piece is individually manufactured with precision, resulting in superior paint quality to accentuate any vehicle. The name of dry carbon fibre comes from its manufacturing process. Dry carbon fibre is formed by using a "pre-impregnated" or impregnated piece of carbon material. This piece of carbon is first placed in a mould and then placed in a sealed autoclave to cure properly. This method produces the least amount of waste and forms a lighter version of the carbon than the "wet" method. The autoclave vacuuming process in the production of dry carbon means fewer pinholes and virtually no air pockets in the carbon. Dry carbon is the highest quality version of carbon fibre products produced. Package includes one pair (passenger and driver side) as a direct OEM replacement for wing liners. Note: The emblems shown in the photos are for demonstration purposes only. The emblems are not included in the package. Original emblems can be reused, or new emblems could be purchased through other suppliers. Compatible vehicles:BMW 3 (F30, F80) M3 2014-2018BMW 3 (F30, F80) M3 CS 2018-2018BMW 3 (F30, F80) M3 Competition 2016-2018BMW 4 Convertible (F33, F83) M4 2014-2020BMW 4 Convertible (F33, F83) M4 Competition 2016-2020BMW 4 Coupe (F32, F82) M4 2014-2020BMW 4 Coupe (F32, F82) M4 CS 2017-2019BMW 4 Coupe (F32, F82) M4 Competition 2016-2020BMW 4 Coupe (F32, F82) M4 GTS 2016-2019

KW V4 coilover suspension incl. support bearings - State of the Art With the new KW V4 with its coilover struts made of stainless steel or aluminum, you give your super sports car the necessary reserves to further increase the driving dynamics. The three-way adjustable high-performance dampers with their independent adjustment of the rebound as well as low-speed and high-speed compression damping are based on the successful racing technology of the multiple overall winner of the ADAC Zurich 24h Race Nürburgring and, depending on the vehicle-specific version, have aluminum support bearings. The new KW V4 is developed exclusively for selected high-performance vehicles, which can be moved more safely at the limits of driving dynamics thanks to our KW suspension technology. - 3-way adjustable high-performance dampers with stainless steel coilover struts - Separate and independent damper adjustment in: - Rebound damping with 16 exact clicks + (firmer) / - (more comfortable) - Low-speed compression damping with 6 exact clicks + (firmer) / - (more comfortable) - High-speed compression damping with 14 exact clicks + (firmer) / - (more comfortable) - Two basic settings ex works with comfort setting and performance setting - Depending on the vehicle, aluminum support bearings are an integral part of the scope of delivery Please note the conditions and instructions for this product: - VA + HA height-adjustable (VA coilover struts, HA springs with height adjustment + dampers) - Dampers have easy-to-use adjustment wheels. Due to the design, the rebound stage can only be adjusted when the piston rod is accessible. Technical information: Lowering front/rear axle (mm): 15-40/20-45 Version: V4 Hardness adjustment: Rebound and compression damping Material: Stainless steel Adjustment front/rear axle: thread/thread Approval: Parts certificate (§19.3) Compatible vehicles: Manufacturer Model Version Body Fuel Performance Displacement Cylinder Drive BMW 2 Series Coupe (F22, F87) 1C, M3 10/2012- M2 Coupe Petrol 272 KW 2979 ccm 6 Rear-wheel drive BMW 2 Series Coupe (F22, F87) 1C, M3 10/2012- M2 Competition Coupe Petrol 302 KW 2979 ccm 6 rear-wheel drive Only models year of construction: 03/2016- Axle load VA/HA (kg): -970/-1080

The EVO II Competition intercooler kit is suitable for the following vehicles:BMW 335d E90/91/92/93 (2005-2013)*Adaptations to the vehicle are necessary (see installation instructions) Experience an impressive increase in performance with our Wagner Tuning Performance intercooler! With the impressive mesh dimensions of 520 mm x 210 mm x 150 mm (stepped volume: 13.6 litres), our high-performance intercooler offers an enormous 65 % larger inflow area and a whopping 87 % more charge air volume compared to the standard intercooler. The high-quality competition high-performance mesh with internal turbulators guarantees the best performance and optimum cooling. Despite its impressive size, the intercooler weighs just 7.4 kg, making it a lightweight in its class. The cast aluminium end boxes have been optimised using advanced flow analysis in the CFD system to ensure optimum airflow. The EVO 2 intercooler kit was specially developed for the high demands of the large tuning stages. We have eliminated the original click connections and increased the connection diameter at the inlet and outlet to Ø70 mm, which means that the kit is equipped with reinforced silicone hoses. The result is outstanding cooling properties with minimal back pressure. In addition, all our intercoolers are coated with a high-quality anti-corrosion coating, which ensures long-lasting and optimum cooling with a significant increase in performance. The EVO3 high-performance intercooler kit is completely ready to install and can be easily replaced with the standard intercooler. Due to its size, minor adjustments to the radiator support are required. The intercooler has been tested up to 6 bar and is pressure-stable, so that it also fulfils the requirements of racing. We attach great importance to continuous quality monitoring for all our products in order to guarantee you the highest quality at all times. Take the performance of your vehicle to a new level and experience peak performance with the EVO 2 high-performance intercooler from Wagner Tuning! Advantages of the Wagner Tuning intercooler:- improved cooling performance- 65% larger inflow area- 87% more charge air volume- Inlet and outlet extended to Ø70 mm- Plug & Play OEM intercooler:V = 7.29 LITRESA = 663 cm² Wagner Tuning intercooler:V = 13.6 LA = 1092 cm² Scope of delivery:1 intercooler (black coated)3 silicone hoses1 aluminium adapter (black anodised)1 aluminium charge air pipe (black anodised)1 mounting material1 assembly instructions Attention: Not approved in the area of the StVZO.