KW V3 Clubsport coilover suspension | fits BMW 3 Series (E36) | 35220811 | 35220831

From €2,920.26*

Delivery time: Availability on request at Aulitzky Tuning*

Year of construction

06/1992 - 02/1998

09/1990 - 06/1992

Optional: Installation on site at Aulitzky Tuning

- Installation and removal of coilover suspension
- Wheel camber correction kit
- Wheel alignment
- Calibration of assistance systems/lights
- Individual suspension tuning according to customer requirements
- Individual test drive and adjustment together with the customer

Assembly at location DE-91564 Neuendettelsau

Reset choice

€0.00*

Finanzieren Sie ihren Einkauf über die Targobank.

Product number: KW352208311

Product information "KW V3 Clubsport coilover suspension | fits BMW 3 Series (E36) | 35220811 | 35220831"

KW V3 Clubsport coilover suspension incl. support bearing

With an uncompromising technology transfer from racing to the road, the KW Clubsport coilovers convince.
The KW Clubsport coilovers convince with their uncompromising combination of high-end racing technology with maintenance-free KW original equipment components and expertises.
This gives you the ideal accessories to realise the full potential of your sports car at trackdays, sports driver training courses, tourist drives on Grand Prix circuits and on the Nürburgring Nordschleife.

Developed for the toughest racetrack in the world: the Nürburgring Nordschleife
Even in their basic set-up, KW Clubsport coilovers are tuned to the different track surfaces, steep bends, jumps and chicanes of the 20.8 kilometre long Nürburgring Nordschleife. After all, as one of the most successful suspension manufacturers and suppliers in motorsport, we are at home on the Nordschleife.
In the VLN Endurance Championship alone, we equip over 70 racing teams and, as a suspension manufacturer, have supported six overall victories at the ADAC Zurich 24h Race Nürburgring in ten years. The winner of the ADAC GT Masters 2011 also relies on our racing expertise, from which the KW Clubsport coilovers benefit.
The basic setup of the KW V3 Clubsport and KW V4 Clubsport with separate expansion tank, which is perfectly adapted to the Nordschleife, allows you to adjust your sports car even more individually to the desired sports tyre setup thanks to the numerous adjustment options.
In addition to optionally available adjustable support bearings, the KW Clubsport coilovers allow you to adjust the damper forces independently in the rebound and compression stages with the integrated

KW V3 Clubsport coilover suspension technology like in racing
With the adjustment wheels for the rebound adjustment, you can fine-tune the recommended basic setup for your sports car and your individually installed performance components with 16 exact clicks. This allows you to directly influence changed wheel loads, for example to influence bodywork movements. Separate from the rebound adjustment, the KW V3 Clubsport allows you to adjust the compression damping with twelve exact clicks in the low-speed range to your requirements, such as the sports tyres used.
These setting options allow you to consider individual setups to suit the vehicle weight, sports tyre characteristics, track characteristics and operating conditions.

- Freely adjustable damping technology in rebound and compression damping
- Stainless steel technology "inox-line"
- Stepless lowering
- Tested adjustment range
- high-quality components for a long service life
- Adjustable rebound damping with 16 exact clicks
- Adjustable compression damping with 12 exact clicks
- unique, independently acting damping force adjustment
- optionally available with aluminium Unibal support bearing.

Setup: Application range and damper tuning
The KW V3 Clubsport coilover suspensions impress with their vehicle-specific setup for trackday events on the Nürburgring Nordschleife, as well as the possibility of quickly tuning these suspensions for other racetracks and individual performance sports cars.

Please note the conditions and instructions for this product:
- VA + HA height adjustable (VA coilover struts, HA springs with height adjustment + damper)
- When used with standard wheel/tyre combinations, additional commercially available track wideners from the accessories may be required
- Dampers have easy-to-use adjustment wheels. Due to the design, the rebound stage can only be adjusted if the piston rod is accessible.
- Clubsport suspension with support bearing: only available with VA support bearing

Technical information:
Product line: Track Performance
Lowering VA/HA (mm): 50-80/50-80
Version: V3 Clubsport
Hardness adjustment: Rebound and compression
Material: Stainless steel
Adjustment VA/HA: Thread/thread
Approval: Parts certificate (§19.3)

Compatible vehicles:
Manufacturer Model Version Body Fuel Performance Displacement Cylinder Drive
BMW 3 Series (E36) 3C, 3/C, M3/B 09/1990-11/1998 316 i Notchback Petrol 73 KW 1596 ccm 4 Rear Wheel Drive
BMW 3 Series (E36) 3C, 3/C, M3/B 09/1990-11/1998 316 i Notchback Petrol 75 KW 1596 ccm 4 Rear Wheel Drive
BMW 3 Series (E36) 3C, 3/C, M3/B 09/1990-11/1998 316 i notchback petrol 75 KW 1596 ccm 4 rear-wheel drive
BMW 3 Series (E36) 3C, 3/C, M3/B 09/1990-11/1998 318 i notchback petrol 83 KW 1796 ccm 4 rear-wheel drive
BMW 3 Series (E36) 3C, 3/C, M3/B 09/1990-11/1998 318 i notchback petrol 85 KW 1796 ccm 4 rear-wheel drive
BMW 3 Series (E36) 3C, 3/C, M3/B 09/1990-11/1998 318 i notchback petrol 103 KW 1796 ccm 4 rear-wheel drive
BMW 3 Series (E36) 3C, 3/C, M3/B 09/1990-11/1998 318 is notchback petrol 103 KW 1796 ccm 4 rear-wheel drive
BMW 3 Series (E36) 3C, 3/C, M3/B 09/1990-11/1998 318 is notchback petrol 103 KW 1895 ccm 4 rear-wheel drive
BMW 3 Series (E36) 3C, 3/C, M3/B 09/1990-11/1998 318 tds notchback diesel 66 KW 1665 ccm 4 rear-wheel drive
BMW 3 Series (E36) 3C, 3/C, M3/B 09/1990-11/1998 320 i notchback petrol 110 KW 1990 ccm 6 rear-wheel drive
BMW 3 Series (E36) 3C, 3/C, M3/B 09/1990-11/1998 323 i Notchback Petrol 125 KW 2494 ccm 6 Rear-wheel drive
BMW 3 Series (E36) 3C, 3/C, M3/B 09/1990-11/1998 325 i Notchback Petrol 141 KW 2494 ccm 6 Rear-wheel drive
BMW 3 Series (E36) 3C, 3/C, M3/B 09/1990-11/1998 325 td notchback diesel 85 KW 2497 ccm 6 rear-wheel drive
BMW 3 Series (E36) 3C, 3/C, M3/B 09/1990-11/1998 325 tds notchback diesel 105 KW 2497 ccm 6 rear-wheel drive
BMW 3 Series (E36) 3C, 3/C, M3/B 09/1990-11/1998 328 i notchback petrol 142 KW 2793 ccm 6 rear-wheel drive
BMW 3 Series Coupe (E36) 3B, 3/B, M3B, M3/B 10/1991-05/1999 316 i Coupe Petrol 75 KW 1596 ccm 4 rear-wheel drive
BMW 3 Series Coupe (E36) 3B, 3/B, M3B, M3/B 10/1991-05/1999 318 i Coupe Petrol 83 KW 1796 ccm 4 rear-wheel drive
BMW 3 Series Coupe (E36) 3B, 3/B, M3B, M3/B 10/1991-05/1999 318 is Coupe Petrol 103 KW 1796 ccm 4 rear-wheel drive
BMW 3 Series Coupe (E36) 3B, 3/B, M3B, M3/B 10/1991-05/1999 318 is Coupe Petrol 103 KW 1895 ccm 4 rear-wheel drive
BMW 3 Series Coupe (E36) 3B, 3/B, M3B, M3/B 10/1991-05/1999 320 i Coupe Petrol 110 KW 1990 ccm 6 rear-wheel drive
BMW 3 Series Coupe (E36) 3B, 3/B, M3B, M3/B 10/1991-05/1999 323 i Coupe Petrol 125 KW 2494 ccm 6 Rear-wheel drive
BMW 3 Series Coupe (E36) 3B, 3/B, M3B, M3/B 10/1991-05/1999 325 i Coupe Petrol 141 KW 2494 ccm 6 Rear-wheel drive
BMW 3 Series Coupe (E36) 3B, 3/B, M3B, M3/B 10/1991-05/1999 325 is Coupe Petrol 141 KW 2494 ccm 6 Rear-wheel drive
BMW 3 Series Coupe (E36) 3B, 3/B, M3B, M3/B 10/1991-05/1999 328 i Coupe Petrol 142 KW 2793 ccm 6 Rear-wheel drive

Please enter a valid email address.

Your question *

Please enter a valid question.

I agree that my data will be processed to answer the question. I have taken note of the Privacy Policy and agree to the information described therein.*

To continue, enter the characters shown above*

Fields marked with * are mandatory.

There aren't any asked questions yet.

Zuletzt gesehene Produkte

Competition transmission oil cooler kit | fits BMW M3/M4 incl. Competition/CSL (G80/G81/G82/G83) S58 | Wagner Tuning

Plug and Play suitable for the following models: BMW G80/81 M3 (Competition) 353-375KW/480-510hp from 2021+ BMW G82/G83 M4 (Competition/CSL) 353-405KW/480-550hp from 2021+ Note: only for vehicles with automatic transmission! Now with parts certificate!Optimise the performance and reliability of your S58 with the Wagner Tuning Competition transmission oil cooler kit. This essential kit for all racing enthusiasts offers superior cooling performance and ensures that the oil temperature always remains in the optimum range, even under extreme conditions. Features:Extended cooling surface: The frontal airflow area has been increased by an impressive 81.6%, allowing for significantly more efficient cooling.Larger mesh volume: With a 93.6% larger mesh volume, this transmission oil cooler ensures maximum heat dissipation and keeps the oil temperature stable even under high loads.Optimum performance: Specially developed for performance-enhanced vehicles, this kit guarantees constant and optimum oil cooling to keep the oil pressure stable and extend the service life of the transmission.Easy installation: The plug & play design enables quick and easy installation, so you can have your vehicle up and running in no time at all. Scope of delivery:1x oil cooler (black coated)1x mounting material1x parts certificate Experience the perfect balance between performance and reliability:The Wagner Tuning Competition transmission oil cooler kit is the ideal addition for your S58. Enjoy the benefits of improved cooling and stable performance that impresses even under the most demanding conditions. With parts certificate (for easy registration according to §19 paragraph 3 of the StVZO).

€890.00*

Intake system Carbon | fits VAG 2.0 EA888 Gen.4 DNPA Golf 8 GTI, Octavia (NX), Cupra Leon (KL) 245hp | Eventuri

Facts: Performance increase (standard Golf R): 10-13hp, 12-15Nm Performance increase (tuned Golf R): 15-20hp, 25-30Nm Material: Carbon fibre Manufacturer: Eventuri Parts certificate: A certificate is available for this product for certain regions and vehicles (details below) The MK8 Golf GTi/R intake manifold is a complete revision of the standard intake manifold up to the turbo inlet. Taking inspiration from our RS3 intake, we have maximised the space available to create an intake that is suitable for all power levels, from standard specification through to high performance systems with hybrid or full frame turbos. This intake system has been developed to provide the highest possible flow rate whilst achieving the lowest possible intake temperatures. Each component has been designed to give the turbo a smooth and clear flow path. The restrictive standard intake pipe with a diameter of 73 mm is replaced by an intake pipe with a larger diameter of 94 mm. The filter itself has an outer diameter of 192mm or 7.5? with a filter area of over 110,000mm^2. The patented Venturi housing is designed to provide the largest possible internal volume for the available space in the Golf engine bay and provides laminar flow to the turbo pipe. Finally, the duct seals the filter opening at the windscreen, but is not restricted by the standard intake alone. We have raised the front of the duct to now create an additional opening behind the bonnet, equivalent to an extra 7? diameter hole for the inlet to draw from. The resulting system can significantly outflow the stock airbox while keeping intake temperatures to a minimum with the sealed design. Dyno testing Our MK8 Golf intake has been independently tested by a renowned tuner in the UK, Regal Autosport. A MK8 Golf R was tested in original condition and with a tuning box. The tests were carried out on the same day, with the standard airbox being tested first and then the Eventuri. No other changes were made to the car. The first graph shows the results with a stock map. As can be seen, there is a measurable gain across the rev range of up to 12bhp. This gain is noticeable even in a standard vehicle on the road due to better throttle response and faster acceleration. The second diagram shows the results when using a tuning box that increases the flow requirement of the intake system. The tuning box was used for both the standard airbox and the Eventuri intake, with no changes made between tests. With a higher flow requirement, the stock airbox places a greater restriction on the turbo, which is evident by the significant increase achieved with the Eventuri fitted. We now have a power increase of up to 20 hp and 30 Nm across the entire rev range, which is even more noticeable on the road. We expect the gains to be even greater with higher tuning levels. The improvements are due to a combination of reasons: 1) The closed system keeps IAT levels low - the Golf's engine bay can heat up very quickly, so an open cone filter leads to an increase in IAT levels and therefore a loss of power. 2) The Venturi housing provides a smooth transition from the filter to the intake pipes, both of which are matched to an internal diameter of 94mm. This contributes to a more efficient operation of the turbo. 3) The entire system is made from pure pre-impregnated carbon fibre, which provides excellent insulation against heat and has smooth internal surfaces, unlike glass fibre, which has sharp resin lines. Parts certificate The manufacturer's specifications apply to installation. An existing certificate is no guarantee that the product can also be installed in the corresponding vehicle. A certificate is available for this product for the following regions and vehicles: * DE/AT: Vehicle registration document, field K --- CH/LI: Vehicle licence, field 24 Country Model Type approval* DE/AT Audi S3 (8Y) e1*2007/46*2060*.. DE/AT Audi TTS (FV/FVP/8S e1*2001/116*0369*.. DE/AT Cupra Ateca LCI e9*2007/46*6394*.. DE/AT Cupra Formentor e9*2007/46*4008*.. DE/AT Cupra Leon e9*2007/46*3167*.. DE/AT Skoda Octavia RS e8*2007/46*0355*.. DE/AT Skoda Superb e8*2007/46*0317*.. DE/AT Volkswagen Arteon R e1*2007/46*1725*.. DE/AT Volkswagen Golf 8 GTI e1*2007/46*2014*.. DE/AT Volkswagen Golf 8 GTI CS e1*2007/46*2014*.. DE/AT Volkswagen Golf 8R e1*2007/46*2014*.. DE/AT Volkswagen Tiguan R e1*2001/116*0450*.. DE/AT Volkswagen Tiguan R (AD1) e1*2007/46*0487*.. Compatible vehicles: VehicleVehicle typePowerEngine capacityEngine type Audi Q3 (F3)45 TFSI quattro180kW / 245hp1984cm³DNPA Cupra Formentor (KM)2.0 TSI180kW / 245hp1984cm³DNPA Cupra Leon (KL)2.0 TSI180kW / 245hp1984cm³DNPA Seat Tarraco (KN)2.0 TFSI 4Drive180kW / 245hp1984cm³DNPA Skoda Octavia IV (NX)RS 2.0 TFSI180kW / 245hp1984cm³DNPA Skoda KodiaqRS 2.0 TSI 4x4180kW / 245hp1984cm³DNPA VW Golf 8GTI 2.0 TSI180kW / 245hp1984cm³DNPA VW Tiguan II (AD)2.0 TSI 4motion180kW / 245hp1984cm³DNPA

€1,640.00*

Turbo pipe Carbon for intake system | fits Mercedes-Benz A250/A35 AMG (177), CLA250/CLA35 AMG (118) | Eventuri

FITS ONLY THE EVENTURI INLET SYSTEM: Mercedes A35 AMG, CLA35 AMG, A250, CLA250 | 177, 118 The Mercedes A35 Eventuri turbo pipe was developed to offer the turbo a less restrictive flow path compared to the standard pipe. We have succeeded in increasing the internal volume and eliminating the corrugated, flexible section on the airbox side. By using a completely solid pipe all the way from the intake tract to the turbo, the flow path is smoother and the airflow can remain more laminar. To accommodate the movement of the engine, our A35 intake has a "floating" pipe that can move within the airbox. The shape of the carbon tube on the turbo side has been optimised using CFD to minimise turbulence. The connection to the turbo is achieved by an innovative silicone coupling, which has an internal thermal separator between the carbon pipe and the metal turbo housing. The multiple vent ports at the rear of the pipe are done with a CNC machined block that also provides a smooth internal surface for airflow within the pipe. The Eventuri A35-A250 turbo inlet pipe is made from prepreg carbon fibre and comes with a range of other components designed for a specific purpose and manufactured to the highest standards. It is available to fit the A35, CLA35 and A250. The inlet pipe is only suitable for our intake system. Each intake system consists of: Prepreg carbon pipe CNC-milled breather block CNC-milled MAP boss CNC-milled breather nozzle CNC-milled reinforcement ring Laser-cut bracket Silicone couplings with oil-resistant lining Marine grade stainless steel hose clamps Compatible vehicles:VehicleTypePowerEngine capacityEngine typeYear of construction Mercedes A-Class (W177/V177)A250 / 4-matic165kW / 224hp1991cm³M 260.92003.18 - Mercedes A-Class (W177/V177)A35 AMG 4-matic225kW / 306hp1991cm³M 260.92009.18 - Mercedes CLA (C118/X118)A250 / 4-matic165kW / 224hp1991cm³M 260.92003.19 - Mercedes CLA (C118/X118)CLA35 AMG 4-matic225kW / 306hp1991cm³M 260.92004.19 -

€898.00*

KW V1 coilover suspension inox | fits Audi RS4 quattro B7 Avant/Cabrio | 10210061

KW V1 coilover suspension Sportiness paired with outstanding looks. With factory pre-configured damping.Our entry-level model for more driving pleasure through an appealing and individually adjustable lowering is the KW V1 coilover suspension in the KW typical "inox-line". Thanks to its high-quality workmanship, the consistent use of stainless steel struts, corrosion-resistant springs and harmonised components, it stands for many years of driving pleasure - and not just for the life of the car. Stepless loweringThe KW V1 enables maximum lowering within the tested adjustment range. This varies depending on the vehicle model and can, for example, be between 30 and 70 millimetres or 50 to 90 millimetres for an individual lowering. Thanks to the dirt-resistant trapezoidal thread and the polyamide threaded ring, the stepless lowering can be varied quickly and easily even years later. Depending on the vehicle, the lowering is carried out either on the wheel-guiding KW stainless steel suspension struts or on the rear axle height adjustment for non-wheel-guiding double-wishbone rear axles. The benchmark for sporty, dynamic tuning fansWith its harmonious basic set-up for sporty driving on the road, the KW V1 convinces the discerning tuning fan. Our development engineers determine a specific damper set-up and spring rate for each vehicle in order to increase your driving pleasure with the optimum balance of sportiness and suitability for everyday use. After all, you are not buying just any coilover suspension, but a KW coilover suspension that has been specially developed and tuned for your vehicle type. As a manufacturer, KW only uses its own resources, high-quality components and the same damper technology as mass-produced manufacturers. With the KW V1, the rolling and rolling movements of the vehicle body are reduced during compression, allowing you to benefit from unadulterated directness and sportier handling when driving. Our experience for your driving pleasureAs a manufacturer of customised suspension solutions for road and racing, we have been the market leader and innovation driver for over 25 years. No matter where in the world, sporty drivers, car manufacturers and tuners rely on our KW coilovers "Made in Germany". Every KW coilover suspension is subjected to extensive load tests during production and is developed and manufactured directly at our company headquarters in Fichtenberg, Swabia, in order to fulfil the high standards of our KW quality management. As a German manufacturer, it is a matter of course for us to provide a multi-year warranty on our KW coilover suspension kits, which exceed OEM quality and cover over 4,600 applications. When installed by one of our KW specialist dealers, this warranty is valid for up to five years. - Optimally adjusted in advance- sporty and harmonious damping technology- Stainless steel technology "inox-line"- Individually height-adjustable- Tested adjustment range- Ready-to-install complete solution- High-quality components for a long service life- Complete documentation for easy handling Setup - factory pre-configured damping setupThe KW V1 has a vehicle-specific, permanently configured damper setup. The spring and the damper are perfectly matched to each other so that you experience an optimum balance of sportiness and suitability for everyday use when driving. Even with a full payload and maximum axle loads, the dampers always work with a sporty characteristic curve. The KW V1 is particularly interesting for tuning enthusiasts who prioritise the show & shine concept. Please note the conditions and instructions for this product: - VA + HA height-adjustable (VA coilover struts, HA springs with height adjustment + damper) - With variant 2 or variant 3, hardness adjustment also possible on the VA only when removed! Technical information: Lowering VA/HA (mm): 15-45/10-30 Version: V1 Hardness adjustment: none Material: stainless steel Adjustment VA/HA: thread/thread Approval: parts certificate (§19.3) Compatible vehicles: Manufacturer Model Version Body Fuel Performance Displacement Cylinder Drive AUDI A4 Avant (8E) 8ED, QB6, B7 11/2004-06/2008 RS4 quattro station wagon Petrol 309 KW 4163 ccm 8 All-wheel drive AUDI A4 B7 Cabriolet (8HE) 01/2002-12/2009 RS4 quattro Cabriolet Petrol 309 KW 4163 ccm 8 All-wheel drive

€1,466.08*

Transmission oil cooler | fits BMW 1M/335i/M3 incl. CRT/GTS (E82/E90/E92/E93) N54 N55 S65 | CSF Race

CSF Transmission oil cooler for E9x DKG / 6-speed | Engine oil cooler for E-series N54 This high-quality transmission oil cooler has been specially developed for the E9x DKG / 6-speed models and engine oil cooler for the E-series N54.The cooler is a guaranteed guarantee of quality when it comes to keeping your car running at optimum performance while extending engine life through improved cooling capabilities. CSF has taken great care in the manufacture of this transmission oil cooler to ensure that the product is rust-resistant and has a long service life. Therefore, the entire cooler is made of high quality aluminum that is not only lightweight but also has excellent heat dissipation to keep the engine cool every time you drive. Fitting the radiator is simple and straightforward, as it can be replaced in exactly the same way as the original part. It should be noted that it is part of the transmission oil cooling assembly. It is an essential product designed to meet the demands of a powerful engine like the BMW E9x M3 and keep it running at optimum performance. With CSF's quality and expertise, you can be sure that your engine will be offered long-lasting and efficient performance with this transmission oil cooler from CSF. Compatible vehicles:BMW 1 Coupe (E82) M 2011-2012BMW 3 (E90) 335 i 2006-2011BMW 3 (E90) 335 i xDrive 2008-2011BMW 3 (E90) M3 2007-2011BMW 3 (E90) M3 CRT 2011-2011BMW 3 Cabriolet (E93) 335 i 2006-2013BMW 3 Cabriolet (E93) M3 2008-2013BMW 3 Coupe (E92) 335 i 2006-2013BMW 3 Coupe (E92) 335 i xDrive 2008-2013BMW 3 Coupe (E92) 335 i xDrive 2009-2013BMW 3 Coupe (E92) M3 2007-2013BMW 3 Coupe (E92) M3 GTS 2007-2013BMW 3 Touring (E91) 335 i 2006-2012BMW 3 Touring (E91) 335 i xDrive 2008-2012

€612.85*

KW V3 Clubsport coilover suspension | fits BMW 3 Series (E36) | 35220811 | 35220831

Ratenrechner

Ask a question

Previously asked questions