KW V1 coilover suspension inox | fits for Audi RS6 quattro C6/4F | 1021000L | 1021000S

Plug and Play suitable for the following models: BMW G80/81 M3 (Competition) 353-375KW/480-510hp from 2021+ BMW G82/G83 M4 (Competition/CSL) 353-405KW/480-550hp from 2021+ Note: only for vehicles with automatic transmission! Now with parts certificate!Optimise the performance and reliability of your S58 with the Wagner Tuning Competition transmission oil cooler kit. This essential kit for all racing enthusiasts offers superior cooling performance and ensures that the oil temperature always remains in the optimum range, even under extreme conditions. Features:Extended cooling surface: The frontal airflow area has been increased by an impressive 81.6%, allowing for significantly more efficient cooling.Larger mesh volume: With a 93.6% larger mesh volume, this transmission oil cooler ensures maximum heat dissipation and keeps the oil temperature stable even under high loads.Optimum performance: Specially developed for performance-enhanced vehicles, this kit guarantees constant and optimum oil cooling to keep the oil pressure stable and extend the service life of the transmission.Easy installation: The plug & play design enables quick and easy installation, so you can have your vehicle up and running in no time at all. Scope of delivery:1x oil cooler (black coated)1x mounting material1x parts certificate Experience the perfect balance between performance and reliability:The Wagner Tuning Competition transmission oil cooler kit is the ideal addition for your S58. Enjoy the benefits of improved cooling and stable performance that impresses even under the most demanding conditions. With parts certificate (for easy registration according to §19 paragraph 3 of the StVZO).

KW V3 Clubsport coilover suspension incl. support bearing With an uncompromising technology transfer from racing to the road, the KW Clubsport coilovers convince.The KW Clubsport coilovers convince with their uncompromising combination of high-end racing technology with maintenance-free KW original equipment components and expertises.This gives you the ideal accessories to realise the full potential of your sports car at trackdays, sports driver training courses, tourist drives on Grand Prix circuits and on the Nürburgring Nordschleife. Developed for the toughest racetrack in the world: the Nürburgring NordschleifeEven in their basic set-up, KW Clubsport coilovers are tuned for the different track surfaces, steep bends, jumps and chicanes of the 20.8 kilometre long Nürburgring Nordschleife. After all, as one of the most successful suspension manufacturers and suppliers in motorsport, we are at home on the Nordschleife.In the VLN Endurance Championship alone, we equip over 70 racing teams and, as a suspension manufacturer, have supported six overall victories at the ADAC Zurich 24h Race Nürburgring in ten years. The winner of the ADAC GT Masters 2011 also relies on our racing expertise, from which the KW Clubsport coilovers benefit.The basic setup of the KW V3 Clubsport and KW V4 Clubsport with separate expansion tank, which is perfectly adapted to the Nordschleife, allows you to adjust your sports car even more individually to the desired sports tyre setup thanks to the numerous adjustment options.In addition to optionally available adjustable support mounts, the KW Clubsport coilovers allow you to adjust the damper forces independently in the rebound and compression stages with the integrated KW V3 Clubsport coilover suspension technology like in racingWith the adjustment wheels for the rebound adjustment, you can fine-tune the recommended basic setup for your sports car and your individually installed performance components with 16 exact clicks. This allows you to directly influence changed wheel loads, for example to influence bodywork movements. Separate from the rebound adjustment, the KW V3 Clubsport allows you to adjust the compression damping to your requirements, such as the sports tyres used, with twelve precise clicks in the low-speed range.These setting options allow you to consider individual setups to suit the vehicle weight, sports tyre characteristics, track characteristics and operating conditions. - Freely adjustable damping technology in rebound and compression damping- Stainless steel technology "inox-line"- Stepless lowering- Tested adjustment range- high-quality components for a long service life- Adjustable rebound damping with 16 exact clicks- Adjustable compression damping with 12 exact clicks- unique, independently acting damping force adjustment- optionally available with aluminium Unibal support bearing. Setup: Application range and damper tuningThe KW V3 Clubsport coilover suspensions impress with their vehicle-specific setup for trackday events on the Nürburgring Nordschleife as well as the possibility of quickly tuning these suspensions for other racetracks and individual performance sports cars. Please note the conditions and instructions for this product:- VA + HA height-adjustable (VA coilover struts, HA springs with height adjustment + dampers)- Vehicles with electronic damper control must be decommissioned. Vehicle-specific KW decommissioning kits can be found in the accessories table.- The dampers have easy-to-operate adjustment wheels. Due to the design, the rebound stage can only be adjusted if the piston rod is accessible.- Clubsport suspension with support bearing: only available with VA support bearing Technical information:Lowering VA/HA (mm): 35-50/30-50Version: V3 ClubsportHardness adjustment: Rebound and compression dampingMaterial: Stainless steelAdjustment VA/HA: thread/threadApproval: Parts certificate (§19.3) Compatible vehicles:Manufacturer Model Version Body Fuel Performance Displacement Cylinder DriveBMW Z4 Roadster (G29) G4Z 11/2018- M40 i Convertible petrol 250 KW 2998 ccm 6 rear-wheel driveBMW Z4 Roadster (G29) G4Z 11/2018- sDrive 20 i Convertible Petrol 120 KW 1998 ccm 4 rear-wheel driveBMW Z4 Roadster (G29) G4Z 11/2018- sDrive 20 i Convertible Petrol 145 KW 1998 ccm 4 rear-wheel driveBMW Z4 Roadster (G29) G4Z 11/2018- sDrive 30 i Convertible Petrol 190 KW 1998 ccm 4 rear-wheel driveTOYOTA SUPRA (DB_, JBSC, JTSC) 03/2019- 2.0 (DB22, DB21) Coupe Petrol 190 KW 1998 cc 4 rear-wheel driveTOYOTA SUPRA (DB_, JBSC, JTSC) 03/2019- 2.0 (DB82, DB81) Coupe petrol 145 KW 1998 ccm 4 rear-wheel driveTOYOTA SUPRA (DB_, JBSC, JTSC) 03/2019- 3.0 (DB02, DB01, DB03) Coupe petrol 285 KW 2998 ccm 6 rear-wheel driveTOYOTA SUPRA (DB_, JBSC, JTSC) 03/2019- 3.0 GR (DB41, DB42, DB43) Coupe petrol 250 KW 2998 ccm 6 rear-wheel drive

KW V1 coilover suspension Sportiness paired with outstanding looks. With factory pre-configured damping.Our entry-level model for more driving pleasure through an appealing and individually adjustable lowering is the KW V1 coilover suspension in the KW typical "inox-line". Thanks to its high-quality workmanship, the consistent use of stainless steel struts, corrosion-resistant springs and harmonised components, it stands for many years of driving pleasure - and not just for the life of the car. Stepless loweringThe KW V1 enables maximum lowering within the tested adjustment range. This varies depending on the vehicle model and can, for example, be between 30 and 70 millimetres or 50 to 90 millimetres for an individual lowering. Thanks to the dirt-resistant trapezoidal thread and the polyamide threaded ring, the stepless lowering can be varied quickly and easily even years later. Depending on the vehicle, the lowering is carried out either on the wheel-guiding KW stainless steel suspension struts or on the rear axle height adjustment for non-wheel-guiding double-wishbone rear axles. The benchmark for sporty, dynamic tuning fansWith its harmonious basic set-up for sporty driving on the road, the KW V1 convinces the discerning tuning fan. Our development engineers determine a specific damper set-up and spring rate for each vehicle in order to increase your driving pleasure with the optimum balance of sportiness and suitability for everyday use. After all, you are not buying just any coilover suspension, but a KW coilover suspension that has been specially developed and tuned for your vehicle type. As a manufacturer, KW only uses its own resources, high-quality components and the same damper technology as mass-produced manufacturers. With the KW V1, the rolling and rolling movements of the vehicle body are reduced during compression, allowing you to benefit from unadulterated directness and sportier handling when driving. Our experience for your driving pleasureAs a manufacturer of customised suspension solutions for road and racing, we have been the market leader and innovation driver for over 25 years. No matter where in the world, sporty drivers, car manufacturers and tuners rely on our KW coilovers "Made in Germany". Every KW coilover suspension is subjected to extensive load tests during production and is developed and manufactured directly at our company headquarters in Fichtenberg, Swabia, in order to fulfil the high standards of our KW quality management. As a German manufacturer, it is a matter of course for us to provide a multi-year warranty on our KW coilover suspension kits, which exceed OEM quality and cover over 4,600 applications. When installed by one of our KW specialist dealers, this warranty is valid for up to five years. - Optimally adjusted in advance- sporty and harmonious damping technology- Stainless steel technology "inox-line"- Individually height-adjustable- Tested adjustment range- Ready-to-install complete solution- High-quality components for a long service life- Complete documentation for easy handling Setup - factory pre-configured damping setupThe KW V1 has a vehicle-specific, permanently configured damper setup. The spring and the damper are perfectly matched to each other so that you experience an optimum balance of sportiness and suitability for everyday use when driving. Even with a full payload and maximum axle loads, the dampers always work with a sporty characteristic curve. The KW V1 is particularly interesting for tuning enthusiasts who prioritise the show & shine concept. Please note the conditions and instructions for this product: - VA + HA height-adjustable (VA coilover struts, HA springs with height adjustment + damper) - With variant 2 or variant 3, hardness adjustment also possible on the VA only when removed! Technical information: Lowering VA/HA (mm): 15-45/10-30 Version: V1 Hardness adjustment: none Material: stainless steel Adjustment VA/HA: thread/thread Approval: parts certificate (§19.3) Compatible vehicles: Manufacturer Model Version Body Fuel Performance Displacement Cylinder Drive AUDI A4 Avant (8E) 8ED, QB6, B7 11/2004-06/2008 RS4 quattro station wagon Petrol 309 KW 4163 ccm 8 All-wheel drive AUDI A4 B7 Cabriolet (8HE) 01/2002-12/2009 RS4 quattro Cabriolet Petrol 309 KW 4163 ccm 8 All-wheel drive

KW V5 Clubsport coilover suspension incl. support bearings (incl. decommissioning for electric dampers) The new 4-way adjustable KW V5 Clubsport offers the latest KW Solid Piston GT3 motorsport suspension technology for the sportiest road cars with sports tyre setup for use on the race track and on the road. The entire suspension design of the KW V5 Clubsport coilover suspension with its unibal bearings is designed for the use of semi-slick tyres on close-to-production vehicles. KW Solid Piston Technology for the race track and road In contrast to vibration dampers with overflowed working pistons, KW uses its KW Solid Piston Technology (displacement piston design), which is proven in motorsport and homologated for vehicles such as the BMW M4 GT3 and Porsche 911 GT3 R, in the KW V5 Clubsport coilover suspension. The compression and rebound valves, which can be adjusted separately in the low-speed and high-speed forces, are arranged separately from the damper inner tube and the piston rod. As a result, the KW V5 Clubsport with adjustable KW SPCLH-A (KW Solid Piston Compression Low- and Highspeed Adjustable) compression damping and the KW SPRLH-A (KW Solid Piston Rebound Low- and Highspeed Adjustable) rebound damping offers significant added value. - More sensitive and high-frequency damping - Cavitation-free function - Low-pressure gas range from 6 to 10 bar - Unique, independently acting damper force adjustment - Freely adjustable damping technology for compression and rebound damping - Adjustable low-speed compression damping with 13 exact clicks - Adjustable high-speed compression damping with 13 exact clicks - Adjustable low-speed rebound damping with 13 exact clicks - Adjustable high-speed rebound damping with 13 exact clicks - Stepless lowering - Tested adjustment range - Aluminium Unibal support bearing - parts certificate - High-quality components for a long service life The bodywork remains perfectly supported during aggressive steering manoeuvres and extreme compression. Thanks to the adjustable multi-valve technology, the KW V5 Clubsport dampens bumps and relatively large transverse joints cleanly. Even when hitting curbs, near-series sports cars remain safely controllable with the KW V5 Clubsport coilover suspension. The height adjustment options allow the wheel loads to be adapted. The adjustment options, combined with the damping technology (SPCLH-A and SPRLH-A technology), which can be adjusted separately in compression and rebound, enable individual setups to suit the vehicle weight, tyre characteristics, different track conditions and operating conditions - thanks to multi-valve technology and parts certificates, the KW V5 Clubsport coilover suspension can also be used on public roads. Setup: Application range and damper tuning The KW V5 Clubsport coilover suspension with its KW Solid Piston Technology is the ideal upgrade to drive near-series sports cars safely and quickly with semi-slick tyres on trackdays and tourist drives on race tracks. Thanks to the parts certificate, the KW V5 Clubsport can also be used in everyday life on public roads. Please note the conditions and instructions for this product: -VA + HA height-adjustable (threaded struts) -Dampers have easy-to-use adjustment wheels. Due to the design, the rebound stage can only be adjusted if the piston rod is accessible. -Electronic damper control must be deactivated. Electronic kit for deactivation is included in the scope of delivery. -Aluminum suspension struts (no Inox-line) -Clubsport suspension with support bearing: available with VA + HA support bearing Technical information: Lowering VA/HA (mm): 10-25/10-25 Version: V5 Clubsport Height adjustment: Rebound and compression Material: Aluminum Adjustment VA/HA: Thread/thread Approval: Parts certificate (§19.3) Compatible vehicles: Manufacturer Model Version Body Fuel Performance Displacement Cylinder Drive MERCEDES-BENZ AMG GT (C190) 197 10/2014- GT R (190.379) Coupe Petrol 430 KW 3982 ccm 8 Rear-wheel drive Only models with axle load VA/HA (kg): -905/-1075 not for GT R Pro