Free shipping
info@aulitzkytuning.de
+49 (0)9874 6891630

KW V1 coilover suspension inox | fits Cupra Formentor incl. VZ 4Drive 2.0 TSI/TDI | 10281064 | 10281065

€0.00*

Delivery time: Availability on request at Aulitzky Tuning*

Does the vehicle have electronic damper control?
Optional: Installation on site at Aulitzky Tuning

- Installation and removal of coilover suspension
- Wheel camber correction kit
- Wheel alignment
- Calibration of assistance systems/lights
- Individual suspension tuning according to customer requirements
- Individual test drive and adjustment together with the customer

Assembly at location DE-91564 Neuendettelsau
Reset choice
€0.00*
Product number: KW10281064
Product information "KW V1 coilover suspension inox | fits Cupra Formentor incl. VZ 4Drive 2.0 TSI/TDI | 10281064 | 10281065"

KW V1 coilover suspension

Sportiness paired with outstanding looks. With factory pre-configured damping.
Our entry-level model for more driving pleasure through an appealing and individually adjustable lowering is the KW V1 coilover suspension in the KW typical "inox-line". Thanks to its high-quality workmanship, the consistent use of stainless steel struts, corrosion-resistant springs and harmonised components, it stands for many years of driving pleasure - and not just for the life of the car.

Stepless lowering
The KW V1 enables maximum lowering within the tested adjustment range. This varies depending on the vehicle model and can, for example, be between 30 and 70 millimetres or 50 to 90 millimetres for an individual lowering. Thanks to the dirt-resistant trapezoidal thread and the polyamide threaded ring, the stepless lowering can be varied quickly and easily even years later. Depending on the vehicle, lowering is carried out either on the wheel-guiding KW stainless steel suspension struts or, in the case of non-wheel-guiding double-wishbone rear axles, on the rear axle height adjustment.

The benchmark for sporty, dynamic tuning fans
With its harmonious basic set-up for sporty driving on the road, the KW V1 convinces the discerning tuning fan. Our development engineers determine a specific damper set-up and spring rate for each vehicle in order to enhance your driving pleasure with the optimum balance of sportiness and suitability for everyday use. After all, you are not buying just any coilover suspension, but a KW coilover suspension that has been specially developed and tuned for your vehicle type. As a manufacturer, KW only uses its own resources, high-quality components and the same damper technology as mass-produced manufacturers. With the KW V1, the rolling and rolling movements of the vehicle body are reduced during compression, allowing you to benefit from unadulterated directness and sportier handling when driving.

Our experience for your driving pleasure
As a manufacturer of customised suspension solutions for road and racing, we have been the market leader and innovation driver for over 25 years. No matter where in the world, sporty drivers, car manufacturers and tuners rely on our KW coilovers "Made in Germany". Every KW coilover suspension is subjected to extensive load tests during production and is developed and manufactured directly at our company headquarters in Fichtenberg, Swabia, in order to fulfil the high standards of our KW quality management. As a German manufacturer, it is a matter of course for us to provide a multi-year warranty on our KW coilover suspension kits, which exceed OEM quality and cover over 4,600 applications. When installed by one of our KW specialist dealers, the warranty is up to five years.

- Optimally adjusted in advance
- sporty and harmonious damping technology
- Stainless steel technology "inox-line"
- Individually height-adjustable
- Tested adjustment range
- Ready-to-install complete solution
- High-quality components for a long service life
- Complete documentation for easy handling

Setup - factory pre-configured damping setup
The KW V1 has a vehicle-specific, permanently configured damper setup. The spring and damper are perfectly matched to each other so that you experience an optimum balance of sportiness and suitability for everyday use when driving.

Even with a full payload and maximum axle loads, the dampers always work with a sporty characteristic curve. It is interesting to note that the KW V1 is particularly popular with tuning enthusiasts who prioritise the idea of show & shine.

Please note the requirements and information regarding this product:
- VA + HA height adjustable (VA threaded struts, HA springs with height adjustment + dampers)
- For vehicles with electronic damper control, this must be deactivated. An electronics kit for deactivation is included in the scope of delivery, depending on the selection.

Technical information:
Product line: Street Performance
Lowering VA/HA (mm): 40-60/40-65
Version: V1
Hardness adjustment: none
Material: stainless steel
Adjustment VA/HA: thread/thread
Approval: parts certificate (§19.3)

Compatible vehicles:
Manufacturer Model Version Body Fuel Performance Displacement Cylinders Drive
CUPRA     FORMENTOR (KM7, KMP) 07/2020-     2.0 TDI 4Drive     SUV     Diesel     110 KW     1968 cc     4     All-wheel drive
CUPRA     FORMENTOR (KM7, KMP) 07/2020-     2.0 TSI 4Drive     SUV     Gasoline     140 KW     1984 cc     4     All-wheel drive
CUPRA     FORMENTOR (KM7, KMP) 07/2020-     2.0 TSI 4Drive     SUV     Gasoline     228 KW     1984 cc     4     All-wheel drive
CUPRA     FORMENTOR (KM7, KMP) 07/2020-     2.0 VZ 4Drive     SUV     Gasoline     245 kW     1984 cc     4     All-wheel drive

Please enter a valid email address.
Please enter a valid question.
Fields marked with * are mandatory.

There aren't any asked questions yet.
Zuletzt gesehene Produkte

Zuletzt gesehene Produkte

Air intake system Carbon | fits Mercedes-Benz C63(S) AMG (205) | Wagner Tuning
The Wagner Tuning carbon air intake system is suitable for the following vehicles:Mercedes W205 C63 (S) AMG 350-375KW/476-510hp (2015-2020)Mercedes S205 C63 (S) AMG 350-375KW/476-510hp (2015-2020)Mercedes C205 C63 (S) AMG 350-375KW/476-510hp (2015-2020)Mercedes A205 C63 (S) AMG 350-375KW/476-510hp (2016-2020)Engine designation: M 177 DE 40 AL Discover the ultimate upgrade for your vehicle: The Wagner Tuning carbon air intake system. Our innovative air intake system sets new standards and is a direct replacement for your vehicle's standard system. It has been developed to eliminate the weak points of the original system and maximize the performance and efficiency of your engine. The flow-optimized carbon air intake cover, the plastic lower part and the carbon ram air duct have been manufactured with the highest precision to ensure optimum flow dynamics. This results in an improved air supply without unnecessary blockages or turbulence. The connection diameter in the direction of the turbocharger is Ø76mm and is seamlessly adapted to the original connection diameter of the turbocharger using high-quality silicone hoses. The filter surfaces have been enlarged by an impressive 58% to ensure maximum filter efficiency with minimum pressure loss. With our air intake system, the air mass flow rate increases by as much as +90%, which not only improves the response of your engine, but also leads to a direct increase in performance. In addition to its outstanding performance, the Wagner Tuning air intake system also impresses with its attractive design and first-class workmanship, which enhances and upgrades the engine compartment of your vehicle. Scope of delivery:2 carbon airbox covers2 plastic airbox lower part2 Carbon Ram Air air ducts4 silicone adapter hoses (black)2 sports air filter matInstallation materialInstallation instructionsAttention: Not approved in the area of the StVZO.

€3,210.00*
KW coilover springs | height-adjustable spring kit | fits Mercedes-Benz C63/ C63S AMG (C205/A205) | 25325089
KW coilover springs The spring set with stepless lowering KW coilover springs are used to lower the vehicle in combination with the standard dampers. In contrast to conventional spring sets, individual height adjustment is possible within the tested adjustment range. This solution uses vehicle-specific spring mounts with matched KW lowering springs and suitable elastomers as well as dust protection systems. The standard damper system, for example with electronic or hydraulic control, remains active. Setup - sporty and harmonious spring rates The high-quality chrome-silicon steel springs used by KW coilover springs are matched to the respective standard suspension dampers and wheel loads in their spring rate for each specific vehicle. When developing the respective spring sets, we ensure that the spring rates also harmonise perfectly with the different damper characteristics of your adaptive standard suspension. So even with a KW coilover spring set, you will experience your car more directly and dynamically. KW coilover springs are suitable for car drivers who want to lower their vehicle discreetly and take advantage of an individual adjustment range. Stepless lowering Similar to a coilover suspension, the KW coilover springs allow a stepless lowering in a discreet range. This is not possible with conventional lowering springs. The dust protection elements and spring travel limiters included in the scope of delivery are always adapted to the maximum possible lowering. This means that the height-adjustable KW springs can be used to achieve a sporty, harmonious driving behaviour without compromising the driving dynamics of performance-oriented vehicles. Please note the conditions and instructions for this product: - VA + HA height-adjustable (spring set consisting of VA+HA springs with height adjustment, can only be used with standard dampers) Technical information: Lowering VA/HA (mm): 5-25/15-35 Adjustment HA: Thread Approval: Parts certificate (§19.3) Scope of delivery: Set (VA+HA) Compatible vehicles: Manufacturer Model Version Body Fuel Performance Displacement Cylinder Drive MERCEDES-BENZ C-KLASSE Cabriolet (A205) 204, 204 AMG 06/2016- AMG C 63 (205.486) Cabriolet Petrol 350 KW 3982 ccm 8 Rear-wheel drive MERCEDES-BENZ C-KLASSE Cabriolet (A205) 204, 204 AMG 06/2016- AMG C 63 S (205. 487) Cabriolet Petrol 375 KW 3982 ccm 8 Rear-wheel drive MERCEDES-BENZ C-KLASSE Coupe (C205) 204, 204 AMG 10/2015- AMG C 63 (205.386) Coupe Petrol 350 KW 3982 ccm 8 Rear-wheel drive MERCEDES-BENZ C-KLASSE Coupe (C205) 204, 204 AMG 10/2015- AMG C 63 S (205.387) Coupe Petrol 375 KW 3982 ccm 8 Rear-wheel drive

€942.48*