KW V1 coilover suspension inox | fits BMW 3/4 Series xDrive (F31/F34/F36) | 102200AC | 102200AE

From €1,455.37*

Delivery time: Availability on request at Aulitzky Tuning*

Does the vehicle have electronic damper control?

YES

Optional: Installation on site at Aulitzky Tuning

- Installation and removal of coilover suspension
- Wheel camber correction kit
- Wheel alignment
- Calibration of assistance systems/lights
- Individual suspension tuning according to customer requirements
- Individual test drive and adjustment together with the customer

Assembly at location DE-91564 Neuendettelsau

Reset choice

€0.00*

Finanzieren Sie ihren Einkauf über die Targobank.

Product number: KW102200ACE

Product information "KW V1 coilover suspension inox | fits BMW 3/4 Series xDrive (F31/F34/F36) | 102200AC | 102200AE"

KW V1 coilover suspension

Sportiness paired with outstanding looks. With factory pre-configured damping.
Our entry-level model for more driving pleasure through an appealing and individually adjustable lowering is the KW V1 coilover suspension in the KW typical "inox-line". Thanks to its high-quality workmanship, the consistent use of stainless steel struts, corrosion-resistant springs and harmonised components, it stands for many years of driving pleasure - and not just for the life of the car.

Stepless lowering
The KW V1 enables maximum lowering within the tested adjustment range. This varies depending on the vehicle model and can, for example, be between 30 and 70 millimetres or 50 to 90 millimetres for an individual lowering. Thanks to the dirt-resistant trapezoidal thread and the polyamide threaded ring, the stepless lowering can be varied quickly and easily even years later. Depending on the vehicle, lowering is carried out either on the wheel-guiding KW stainless steel suspension struts or, in the case of non-wheel-guiding double-wishbone rear axles, on the rear axle height adjustment.

The benchmark for sporty, dynamic tuning fans
With its harmonious basic set-up for sporty driving on the road, the KW V1 convinces the discerning tuning fan. Our development engineers determine a specific damper set-up and spring rate for each vehicle in order to enhance your driving pleasure with the optimum balance of sportiness and suitability for everyday use. After all, you are not buying just any coilover suspension, but a KW coilover suspension that has been specially developed and tuned for your vehicle type. As a manufacturer, KW only uses its own resources, high-quality components and the same damper technology as mass-produced manufacturers. With the KW V1, the rolling and rolling movements of the vehicle body are reduced during compression, allowing you to benefit from unadulterated directness and sportier handling when driving.

Our experience for your driving pleasure
As a manufacturer of customised suspension solutions for road and racing, we have been the market leader and innovation driver for over 25 years. No matter where in the world, sporty drivers, car manufacturers and tuners rely on our KW coilovers "Made in Germany". Every KW coilover suspension is subjected to extensive load tests during production and is developed and manufactured directly at our company headquarters in Fichtenberg, Swabia, in order to fulfil the high standards of our KW quality management. As a German manufacturer, it is a matter of course for us to provide a multi-year warranty on our KW coilover suspension kits, which exceed OEM quality and cover over 4,600 applications. When installed by one of our KW specialist dealers, the warranty is up to five years.

- Optimally adjusted in advance
- sporty and harmonious damping technology
- Stainless steel technology "inox-line"
- Individually height-adjustable
- Tested adjustment range
- Ready-to-install complete solution
- High-quality components for a long service life
- Complete documentation for easy handling

Setup - factory pre-configured damping setup
The KW V1 has a vehicle-specific, permanently configured damper setup. The spring and damper are perfectly matched to each other so that you experience an optimum balance of sportiness and suitability for everyday use when driving.

Even with a full payload and maximum axle loads, the dampers always work with a sporty characteristic curve. It is interesting to note that the KW V1 is particularly popular with tuning enthusiasts who prioritise the idea of show & shine.

Please note the conditions and instructions for this product:
- VA + HA height-adjustable (VA coilover struts, HA springs with height adjustment + damper)
- For vehicles with electronic damper control, this must be decommissioned. Electronic kit for decommissioning is included in the scope of delivery for item variant "YES".

Technical information:
Product line: Street Performance
Lowering VA/HA (mm): 25-55/35-60
Version: V1
Hardness adjustment: none
Material: Stainless steel
Adjustment VA/HA: Thread/thread
Approval: Parts certificate (§19.3)

Compatible vehicles:
Manufacturer Model Version Body Fuel Performance Displacement Cylinder Drive
BMW 3 Series Gran Turismo (F34) 3-V 07/2012- 320 d xDrive Hatchback Diesel 120 KW 1995 ccm 4 All-wheel
BMW 3 Series Gran Turismo (F34) 3-V 07/2012- 320 d xDrive Hatchback Diesel 135 KW 1995 ccm 4 All-wheel
BMW 3 Series Gran Turismo (F34) 3- V 07/2012- 320 d xDrive Hatchback Diesel 140 KW 1995 ccm 4 All-wheel
BMW 3 Series Gran Turismo (F34) 3-V 07/2012- 320 d xDrive Hatchback Diesel 147 KW 1995 ccm 4 All-wheel
BMW 3 Series Gran Turismo (F34) 3-V 07/2012- 320 i xDrive Hatchback Petrol 120 KW 1997 ccm 4 All-wheel
BMW 3 Series Gran Turismo (F34) 3- V 07/2012- 320 i xDrive Hatchback Petrol 120 KW 1998 ccm 4 All-wheel
BMW 3 Series Gran Turismo (F34) 3-V 07/2012- 320 i xDrive Hatchback Petrol 135 KW 1997 ccm 4 All-wheel
BMW 3 Series Gran Turismo (F34) 3-V 07/2012- 320 i xDrive Hatchback Petrol 135 KW 1998 ccm 4 All-wheel
BMW 3 Series Gran Turismo (F34) 3- V 07/2012- 328 i xDrive Hatchback Petrol 180 KW 1997 ccm 4 All-wheel drive
BMW 3 Series Gran Turismo (F34) 3-V 07/2012- 330 d xDrive Hatchback Diesel 190 KW 2993 ccm 6 All-wheel drive
BMW 3 Series Gran Turismo (F34) 3-V 07/2012- 330 d xDrive Hatchback Diesel 210 KW 2993 ccm 6 All-wheel drive
BMW 3 Series Gran Turismo (F34) 3-V 07/2012- 330 i xDrive Hatchback Petrol 183 KW 1998 cc 4 All-wheel drive
BMW 3 Series Gran Turismo (F34) 3-V 07/2012- 330 i xDrive Hatchback Petrol 185 KW 1998 cc 4 All-wheel drive
BMW 3 Series Gran Turismo (F34) 3-V 07/2012- 335 d xDrive Hatchback Diesel 230 KW 2993 cc 6 All-wheel drive
BMW 3 Series Gran Turismo (F34) 3-V 07/2012- 335 i xDrive Hatchback Petrol 225 KW 2979 cc 6 All-wheel drive
BMW 3 Series Gran Turismo (F34) 3-V 07/2012- 335 i xDrive Hatchback Petrol 240 KW 2979 cc 6 All-wheel drive
BMW 3 Series Gran Turismo (F34) 3-V 07/2012- 335 i xDrive Hatchback Petrol 250 KW 2979 cc 6 All-wheel drive
BMW 3 Series Gran Turismo (F34) 3-V 07/2012- 340 i xDrive Hatchback Petrol 240 KW 2998 ccm 6 All-wheel drive
BMW 3 Series Gran Turismo (F34) 3-V 07/2012- 340 i xDrive Hatchback Petrol 265 KW 2998 ccm 6 All-wheel drive
BMW 3 Series Touring (F31) 3K 07/2012-06/2019 320 d xDrive Estate Diesel 120 KW 1995 ccm 4 All-wheel drive
BMW 3 Series Touring (F31) 3K 07/2012-06/2019 320 d xDrive Estate Diesel 140 KW 1995 ccm 4 All-wheel drive
BMW 3 Series Touring (F31) 3K 07/2012-06/2019 320 i xDrive Estate Petrol 120 KW 1997 ccm 4 All-wheel drive
BMW 3 Series Touring (F31) 3K 07/2012- 06/2019 320 i xDrive Combi Petrol 135 KW 1997 ccm 4 All-wheel drive
BMW 3 Series Touring (F31) 3K 07/2012-06/2019 320 i xDrive Combi Petrol 135 KW 1998 ccm 4 All-wheel drive
BMW 3 Series Touring (F31) 3K 07/2012-06/2019 330 d M Performance Power Kit xDrive Combi Diesel 210 KW 2993 ccm 6 All-wheel drive
BMW 3 Series Touring (F31) 3K 07/2012- 06/2019 330 d xDrive Combi Diesel 190 KW 2993 ccm 6 All-wheel drive
BMW 3 Series Touring (F31) 3K 07/2012-06/2019 330 i xDrive Combi Petrol 185 KW 1998 ccm 4 All-wheel drive
BMW 3 Series Touring (F31) 3K 07/2012-06/2019 335 d xDrive Combi Diesel 230 KW 2993 ccm 6 All-wheel drive
BMW 3 Series Touring (F31) 3K 07/2012-06/2019 335 i xDrive Kombi Petrol 225 KW 2979 ccm 6 Four-wheel drive
BMW 3 Series Touring (F31) 3K 07/2012-06/2019 335 i xDrive Kombi Petrol 240 KW 2979 ccm 6 Four-wheel drive
BMW 3 Series Touring (F31) 3K 07/2012-06/2019 335 i xDrive Kombi Petrol 250 KW 2979 ccm 6 Four-wheel drive
BMW 3 Series Touring (F31) 3K 07/2012- 06/2019 340 i xDrive Kombi Petrol 240 KW 2998 ccm 6 All Wheel drive
BMW 3 Series Touring (F31) 3K 07/2012-06/2019 340 i xDrive Kombi Petrol 265 KW 2998 ccm 6 All Wheel drive
BMW 4 Series Gran Coupe (F36) 3C 03/2014-05/2021 420 d xDrive Coupe Diesel 120 KW 1995 ccm 4 All Wheel drive
BMW 4 Series Gran Coupe (F36) 3C 03/2014- 05/2021 420 d xDrive Coupe Diesel 140 KW 1995 ccm 4 All Wheel drive
BMW 4 Series Gran Coupe (F36) 3C 03/2014-05/2021 420 i xDrive Coupe Petrol 120 KW 1997 ccm 4 All Wheel drive
BMW 4 Series Gran Coupe (F36) 3C 03/2014-05/2021 420 i xDrive Coupe Petrol 120 KW 1998 ccm 4 All Wheel drive
BMW 4 Series Gran Coupe (F36) 3C 03/2014- 05/2021 420 i xDrive Coupe Petrol 135 KW 1997 ccm 4 All Wheel drive
BMW 4 Series Gran Coupe (F36) 3C 03/2014-05/2021 420 i xDrive Coupe Petrol 135 KW 1998 ccm 4 All Wheel Allrad
BMW 4 Series Gran Coupe (F36) 3C 03/2014-05/2021 430 d xDrive Coupe Diesel 190 KW 2993 ccm 6 Allrad
BMW 4 Series Gran Coupe (F36) 3C 03/2014-05/2021 430 d xDrive Coupe Diesel 210 KW 2993 ccm 6 Allrad
BMW 4 Series Gran Coupe (F36) 3C 03/2014- 05/2021 430 i xDrive Coupe Petrol 183 KW 1998 ccm 4 All Wheel Drive
BMW 4 Series Gran Coupe (F36) 3C 03/2014-05/2021 430 i xDrive Coupe Petrol 185 KW 1998 ccm 4 All Wheel Drive
BMW 4 Series Gran Coupe (F36) 3C 03/2014- 05/2021 435 d xDrive Coupe Diesel 230 KW 2993 ccm 6 Allrad
BMW 4 Series Gran Coupe (F36) 3C 03/2014-05/2021 435 i xDrive Coupe Petrol 225 KW 2979 ccm 6 Allrad
BMW 4 Series Gran Coupe (F36) 3C 03/2014- 05/2021 435 i xDrive Coupe Petrol 250 KW 2979 ccm 6 All Wheel Drive
BMW 4 Series Gran Coupe (F36) 3C 03/2014-05/2021 440 i xDrive Coupe Petrol 240 KW 2998 ccm 6 All Wheel Drive
BMW 4 Series Gran Coupe (F36) 3C 03/2014-05/2021 440 i xDrive Coupe Petrol 265 KW 2998 ccm 6 All Wheel Drive

Please enter a valid email address.

Your question *

Please enter a valid question.

I agree that my data will be processed to answer the question. I have taken note of the Privacy Policy and agree to the information described therein.*

To continue, enter the characters shown above*

Fields marked with * are mandatory.

There aren't any asked questions yet.

Zuletzt gesehene Produkte

Aulitzky Exhaust | Race flap control module | fits BMW M8 Competition (F91/F92/F93) 625hp S63 | Motorsport articles

Function: - Variable flap control of the original or retrofitted flap exhaust system - Can be controlled via steering wheel buttons Compatible vehicles:VehicleVehicle typePowerEngine capacityEngine typeYear of construction BMW 8 Series (F91/F92/F93)M8 Competition460kW / 625hp4395cm³S63 B44 B07.19 - Note:This product is NOT approved in the STVZO and is NOT intended for sale within the EU!This article is intended exclusively for show & motorsport purposes and may not be used/installed in public road traffic.If the component is installed on/in the vehicle, the operating licence expires!The pictures shown are examples.

€449.00*

Stabilizer front + rear axle set | fits BMW 440i/M440i/M440d/420/430 (G22/G23) | 33662-4 | incl. approval | H&R

Made from high-strength spring steel, most H&R anti-roll bars can be adjusted on the front and rear axle. Precision-forged ends and the use of bearings made from a special composite material guarantee precise wheel guidance and reduce the vehicle's tendency to roll. Can be combined with all commercially available standard or sports suspensions. Brief description: - Installation location front axle: Ø 26 mm, not adjustable - Installation location rear axle: Ø 19 mm, not adjustable - with parts certificate - Please note the information! - Illustration may differ from the original The product benefits at a glance: - Reduced rolling tendency of the vehicle - Better handling due to reduced body roll - Partially multi-adjustable - Minimal loss of comfort - Under- or oversteer are reduced or changed - Can be installed with standard or sports suspension - High-strength special spring steel - Bearings made from special composite material - In-house development and production in Germany - With parts certificate Note 55: When installing the H&R stabilisers, the standard add-on parts must also be used, unless otherwise supplied by H&R. It must be ensured that the original parts to be used are in perfect condition; if necessary, these parts must be replaced. Note 60: With this stabiliser bar set, the VA stabiliser bar can also be installed separately (without the HA stabiliser bar) and is approved. However, if only the front stabiliser bar is installed separately, the vehicle may have a tendency to understeer. Usage numbers: 33662-4, 336624 Compatible vehicles: - BMW 4 Series Convertible (G23, G83) M 440i Mild-Hybrid xDrive (275 kW, 374 hp) - BMW 4 Series Convertible (G23, G83) M 440i Mild-Hybrid xDrive (285 kW, 387 hp) - BMW 4 Series Coupe (G22, G82) 420d Mild-Hybrid xDrive (140 kW, 190 hp) - BMW 4 Series Coupe (G22, G82) 430d Mild-Hybrid xDrive (210 kW, 286 hp) - BMW 4 Series Coupe (G22, G82) 430i xDrive (190 kW, 258 hp) - BMW 4 Series Coupe (G22, G82) M 440d Mild-Hybrid xDrive (275 kW, 374 hp) - BMW 4 Series Coupe (G22, G82) M 440i Mild-Hybrid xDrive (285 kW, 387 hp)

€674.00*

KW V3 coilover suspension inox | fits Mercedes-Benz C63 AMG Coupé (C204) | 35225048

KW V3 coilover suspension Unlimited individuality for performance & comfort. Separate damper force adjustment for rebound and compression damping.As with every KW coilover suspension, our suspension engineers also develop a sporty and harmonious basic set-up for the vehicle-specific applications of the KW V3. In addition to tests on our KW 7-post driving dynamics test bench, we also carry out extensive test drives on country roads, the motorway and even on the Nürburgring Nordschleife, kilometre by kilometre, to guarantee you the perfect suspension set-up. For years, the KW V3, one of the world's top aftermarket products, has been the reference for coilover suspensions. With its damper characteristics, high-quality workmanship and excellent durability, it has impressed discerning sports car drivers, tuners, large and small series manufacturers such as Alpina, MTM, Manthey, Oettinger and many other well-known companies in the international automotive industry. Cutting-edge technology from motorsportYou get much more than a sporty lowering and excellent handling on all roads with the KW V3. It is based on our many years of experience as a suspension manufacturer and supplier in international motorsport, such as in the ADAC GT Masters touring car series, FIA GT1, FIA GT3, International GT Open, WTC, VLN and also in the legendary ADAC Zurich 24h Race Nürburgring.Similar to our racing coilovers from the KW Competition programme, the rebound and compression damping of the KW V3 can be adjusted independently of each other. This individual tuning option is appreciated by tuners, sports car manufacturers, tuners and demanding drivers worldwide. The perfect suspension setup for significantly more driving dynamicsIf you have already carried out initial performance modifications to your sporty road vehicle, it is easy to incorporate these into the damper set-up in a targeted manner with the KW V3. The patented KW valve technology for the separate adjustment of the rebound and compression damping allows you to customise the vehicle-specific basic set-up from KW. For example, the KW bottom valve, which can be adjusted in twelve clicks in the low-speed range of the compression stage, gives you the freedom to even take the tyre characteristics of your high and ultra-high performance road tyres into account in the suspension set-up.Thanks to the patented compression adjustment at the lower piston end of the stainless steel housing, you don't even need any tools. The adjustable compression adjustment with its twelve precise clicks allows you to influence body roll and body roll movements by hand without having to change the rebound damping to match the spring rate.With the individually adjustable rebound damping of the KW V3, you can directly influence the handling and comfort through the exact click adjustment. Depending on the vehicle type, the rebound valves of the KW twin-tube dampers are adjusted at the upper end of the piston rod via an integrated adjustment wheel or the slip-on adjustment wheel included in the scope of delivery.By increasing the rebound force via the adjustment wheel, the body movements on the body are reduced. As a result, your car tracks more accurately and you have even more stability at higher cornering speeds. If, for example, you change from the approved wheel/tyre combinations of your car manufacturer to larger rims, you can use the KW V3 to perfectly match the handling of your car and your new alloy wheels. High-quality, customised and durableThe KW V3 is subjected to extensive quality tests during production and every single damper is checked. This is the only way we can fulfil our claim to provide a warranty of up to five years when a KW coilover suspension V3 is installed by a KW specialist dealer. Due to the filigree workmanship and the use of high-quality components, the KW coilover struts made of stainless steel, for example, are 100 per cent rust-free and have an unlimited service life.This means that the functionality of the stepless lowering system via the dirt-resistant KW trapezoidal thread and the KW polyamide threaded ring is not impaired even after many years. Thanks to the individual lowering with its stepless adjustment range, you can also emphasise the sportiness of your vehicle visually. A feature that is very popular in the performance-orientated tuning scene. - Freely adjustable damping technology in rebound and compression damping- inox-line stainless steel technology- Individual, stepless lowering- Tested adjustment range- high-quality components for a long service life- adjustable rebound damping with 16 exact clicks- 12-way adjustable compression damping with click adjustment- Unique, independently acting damping force adjustment Setup: The individually adjustable rebound & compression damping of the KW V3The KW V3 is the ideal accessory for performance-orientated drivers and tuning enthusiasts who demand a high level of sportiness from their vehicles. The dampers, which are separately adjustable in rebound and compression, allow extensive damper tuning with their sophisticated click adjustment. This makes it easy to directly influence the turn-in behaviour, directional stability, tyre grip and handling characteristics for safe controllability at the limit. Please note the conditions and instructions for this product: - VA + HA height-adjustable (VA coilover struts, HA springs with height adjustment + damper) Technical info: Lowering VA/HA (mm): 5-30/5-20 Version: V3 Hardness adjustment: Rebound and compression Material: Stainless steel Adjustment VA/HA: Thread/thread Approval: Parts certificate (§19.3) Compatible vehicles: Manufacturer Model Version Body Fuel Performance Displacement Cylinder Drive MERCEDES-BENZ C-KLASSE Coupe (C204) 204, 204 AMG, 204K 01/2011- C 63 AMG (204.377) Coupe Petrol 336 KW 6208 ccm 8 Rear-wheel drive MERCEDES-BENZ C-KLASSE Coupe (C204) 204, 204 AMG, 204K 01/2011- C 63 AMG (204. 377) Coupe Petrol 358 KW 6208 ccm 8 Rear-wheel drive MERCEDES-BENZ C-KLASSE Coupe (C204) 204, 204 AMG, 204K 01/2011- C 63 AMG (204.377) Coupe Petrol 373 KW 6208 ccm 8 Rear-wheel drive MERCEDES-BENZ C-KLASSE Coupe (C204) 204, 204 AMG, 204K 01/2011- C 63 AMG (204.377) Coupe Petrol 380 KW 6208 ccm 8 Rear-wheel drive

€3,038.07*

Silicone hose kit | fits VW Tiguan (AD1), Skoda Kodiaq 2.0 TSI | Wagner Tuning

The silicone hose kit is suitable for:- VW Tiguan AD1 2.0 TSI 132-162KW/180-220hp (2016-)- Skoda Kodiaq 2.0 TSI 132-162KW/180-220hp (2017-) Maximize the performance and reliability of your VW Tiguan AD1 2.0TSI with our high quality silicone hose kit. Designed for a precise fit and improved airflow, this kit offers an ideal solution for enthusiasts looking to optimize their vehicle. Precision Manufactured Silicone Hoses: The two silicone hoses in this kit are carefully crafted to ensure a perfect fit and effortless installation. Robust hose clamps: Four high-quality hose clamps are included to ensure hoses are securely attached and prevent leaks. Exclusive compatibility: This hose kit is specifically designed for use with our original intercooler to ensure optimum performance and seamless integration. High quality materials: Made from high quality silicone and robust hose clamps, these components offer durability and reliability in all conditions. Modern design: The contemporary design of the hoses gives your engine compartment an appealing look and emphasizes the sporty performance of your vehicle. Attention: This hose kit is only compatible with the original Wagner Tuning intercooler. Scope of delivery:2 silicone hoses4 hose clamps Note: Please note that the item image is for illustrative purposes only and the actual shape of the kit may differ slightly.

€420.00*

KW V1 coilover suspension inox | fits BMW 3/4 Series xDrive (F31/F34/F36) | 102200AC | 102200AE

Ratenrechner

Ask a question

Previously asked questions