KW V1 coilover suspension inox | fits BMW 3/4 Series M340/320d/330d/430d/M440 xDrive (G21/G22) | 102200CZ | 102200DA

From €1,523.20*

Delivery time: Availability on request at Aulitzky Tuning*

Does the vehicle have electronic damper control?

YES

Optional: Installation on site at Aulitzky Tuning

- Installation and removal of coilover suspension
- Wheel camber correction kit
- Wheel alignment
- Calibration of assistance systems/lights
- Individual suspension tuning according to customer requirements
- Individual test drive and adjustment together with the customer

Assembly at location DE-91564 Neuendettelsau

Reset choice

€0.00*

Finanzieren Sie ihren Einkauf über die Targobank.

Product number: KW102200CZDA

Product information "KW V1 coilover suspension inox | fits BMW 3/4 Series M340/320d/330d/430d/M440 xDrive (G21/G22) | 102200CZ | 102200DA"

KW V1 coilover suspension

Sportiness paired with outstanding looks. With factory pre-configured damping.
Our entry-level model for more driving pleasure through an appealing and individually adjustable lowering is the KW V1 coilover suspension in the KW typical "inox-line". Thanks to its high-quality workmanship, the consistent use of stainless steel struts, corrosion-resistant springs and harmonised components, it stands for many years of driving pleasure - and not just for the life of the car.

Stepless lowering
The KW V1 enables maximum lowering within the tested adjustment range. This varies depending on the vehicle model and can, for example, be between 30 and 70 millimetres or 50 to 90 millimetres for an individual lowering. Thanks to the dirt-resistant trapezoidal thread and the polyamide threaded ring, the stepless lowering can be varied quickly and easily even years later. Depending on the vehicle, the lowering is carried out either on the wheel-guiding KW stainless steel suspension struts or on the rear axle height adjustment for non-wheel-guiding double-wishbone rear axles.

The benchmark for sporty, dynamic tuning fans
With its harmonious basic set-up for sporty driving on the road, the KW V1 convinces the discerning tuning fan. Our development engineers determine a specific damper set-up and spring rate for each vehicle in order to increase your driving pleasure with the optimum balance of sportiness and suitability for everyday use. After all, you are not buying just any coilover suspension, but a KW coilover suspension that has been specially developed and tuned for your vehicle type. As a manufacturer, KW only uses its own resources, high-quality components and the same damper technology as mass-produced manufacturers. With the KW V1, the rolling and rolling movements of the vehicle body are reduced during compression, allowing you to benefit from unadulterated directness and sportier handling when driving.

Our experience for your driving pleasure
As a manufacturer of customised suspension solutions for road and racing, we have been the market leader and innovation driver for over 25 years. No matter where in the world, sporty drivers, car manufacturers and tuners rely on our KW coilovers "Made in Germany". Every KW coilover suspension is subjected to extensive load tests during production and is developed and manufactured directly at our company headquarters in Fichtenberg, Swabia, in order to fulfil the high standards of our KW quality management. As a German manufacturer, it is a matter of course for us to provide a multi-year warranty on our KW coilover suspension kits, which exceed OEM quality and cover over 4,600 applications. When installed by one of our KW specialist dealers, this warranty is valid for up to five years.

- Optimally adjusted in advance
- sporty and harmonious damping technology
- Stainless steel technology "inox-line"
- Individually height-adjustable
- Tested adjustment range
- Ready-to-install complete solution
- High-quality components for a long service life
- Complete documentation for easy handling

Setup - factory pre-configured damping setup
The KW V1 has a vehicle-specific, permanently configured damper setup. The spring and the damper are perfectly matched to each other so that you experience an optimum balance of sportiness and suitability for everyday use when driving.

Even with a full payload and maximum axle loads, the dampers always work with a sporty characteristic curve. The KW V1 is particularly interesting for tuning enthusiasts who prioritise the show & shine concept.

Please note the conditions and instructions for this product:
- VA + HA height-adjustable (VA coilover struts, HA springs with height adjustment + damper)
- Vehicles with electronic damper control must be decommissioned. Electronics kit for decommissioning is included in the scope of delivery for the “YES” article variant.

Technical information:
Lowering VA/HA (mm): 40-60/40-60
Version: V1
Hardness adjustment: none
Material: Stainless steel
Adjustment VA/HA: thread/thread
Approval: Parts certificate (§19.3)

Compatible vehicles:
Manufacturer Model Version Body Fuel Performance Displacement Cylinder Drive
BMW 3 Series Touring (G21, G81) G3K 07/2019- 320 d Mild-Hybrid xDrive Estate Diesel/Electric 120 KW 1995 ccm 4 All-wheel drive
BMW 3 Series Touring (G21, G81) G3K 07/2019- 320 d Mild-Hybrid xDrive Estate Diesel/Electric 140 KW 1995 ccm 4 All-wheel drive
BMW 3 Series Touring (G21, G81) G3K 07/2019- 330 d Mild-Hybrid xDrive Estate Diesel/Electric 210 KW 2993 ccm 6 All-wheel drive
BMW 3 Series Touring (G21, G81) G3K 07/2019- 330 d xDrive Estate Diesel 195 KW 2993 ccm 6 All-wheel drive
BMW 3 Series Touring (G21, G81) G3K 07/2019- M 340 d Mild-Hybrid xDrive Estate Diesel/Electric 250 KW 2993 ccm 6 All-wheel drive
BMW 3 Series Touring (G21, G81) G3K 07/2019- M 340 i Mild-Hybrid xDrive estate petrol/electric 275 KW 2998 ccm 6 all-wheel drive
BMW 3 Series Touring (G21, G81) G3K 07/2019- M 340 i xDrive Estate Petrol 275 KW 2998 ccm 6 All-wheel drive
BMW 3 Series Touring (G21, G81) G3K 07/2019- M 340 i xDrive estate petrol 285 KW 2998 ccm 6 all-wheel drive
BMW 4 Series Coupe (G22, G82) 07/2020- 430 d Mild-Hybrid xDrive Coupe diesel/electric 210 KW 2993 ccm 6 all-wheel drive
BMW 4 Series Coupe (G22, G82) 07/2020- M 440 i Mild-Hybrid xDrive Coupe petrol/electric 275 KW 2998 ccm 6 all-wheel drive
BMW 4 Series Coupe (G22, G82) 07/2020- M 440 i Mild-Hybrid xDrive Coupe petrol/electric 285 KW 2998 ccm 6 all-wheel drive
BMW 4 Series Coupe (G22, G82) 07/2020- M440 d Mild-Hybrid xDrive Coupe Diesel/Electric 250 KW 2993 ccm 6 All-wheel drive

Please enter a valid email address.

Your question *

Please enter a valid question.

I agree that my data will be processed to answer the question. I have taken note of the Privacy Policy and agree to the information described therein.*

To continue, enter the characters shown above*

Fields marked with * are mandatory.

There aren't any asked questions yet.

Zuletzt gesehene Produkte

KW V3 Clubsport coilover suspension | fits BMW 1/3 Series M/M3 (E82/E90/E92/E93) N54 | 35220867

KW V3 Clubsport coilover suspension incl. support bearing With an uncompromising technology transfer from racing to the road, the KW Clubsport coilovers convince.The KW Clubsport coilovers convince with their uncompromising combination of high-end racing technology with maintenance-free KW original equipment components and expertises.This gives you the ideal accessories to realise the full potential of your sports car at trackdays, sports driver training courses, tourist drives on Grand Prix circuits and on the Nürburgring Nordschleife. Developed for the toughest racetrack in the world: the Nürburgring NordschleifeEven in their basic set-up, KW Clubsport coilovers are tuned to the different track surfaces, steep bends, jumps and chicanes of the 20.8 kilometre long Nürburgring Nordschleife. After all, as one of the most successful suspension manufacturers and suppliers in motorsport, we are at home on the Nordschleife.In the VLN Endurance Championship alone, we equip over 70 racing teams and, as a suspension manufacturer, have supported six overall victories at the ADAC Zurich 24h Race Nürburgring in ten years. The winner of the ADAC GT Masters 2011 also relies on our racing expertise, from which the KW Clubsport coilovers benefit.The basic setup of the KW V3 Clubsport and KW V4 Clubsport with separate expansion tank, which is perfectly adapted to the Nordschleife, allows you to adjust your sports car even more individually to the desired sports tyre setup thanks to the numerous adjustment options.In addition to optionally available adjustable support bearings, the KW Clubsport coilovers allow you to adjust the damper forces independently in the rebound and compression stages with the integrated KW V3 Clubsport coilover suspension technology like in racingWith the adjustment wheels for the rebound adjustment, you can fine-tune the recommended basic setup for your sports car and your individually installed performance components with 16 exact clicks. This allows you to directly influence changed wheel loads, for example to influence bodywork movements. Separate from the rebound adjustment, the KW V3 Clubsport allows you to adjust the compression damping with twelve exact clicks in the low-speed range to your requirements, such as the sports tyres used.These setting options allow you to consider individual setups to suit the vehicle weight, sports tyre characteristics, track characteristics and operating conditions. - Freely adjustable damping technology in rebound and compression damping- Stainless steel technology "inox-line"- Stepless lowering- Tested adjustment range- high-quality components for a long service life- Adjustable rebound damping with 16 exact clicks- Adjustable compression damping with 12 exact clicks- unique, independently acting damping force adjustment- optionally available with aluminium Unibal support bearing. Setup: Application range and damper tuningThe KW V3 Clubsport coilover suspensions impress with their vehicle-specific setup for trackday events on the Nürburgring Nordschleife, as well as the possibility of quickly tuning these suspensions for other racetracks and individual performance sports cars. Please note the conditions and instructions for this product:- VA + HA height-adjustable (VA coilover struts, HA springs with height adjustment + dampers)- Dampers have easy-to-use adjustment wheels. Due to the design, the rebound stage can only be adjusted if the piston rod is accessible.- Clubsport suspension with support bearing: only available with VA support bearing Technical information:Lowering VA/HA (mm): 10-35/5-25Version: V3 ClubsportHardness adjustment: Rebound and compression dampingMaterial: Stainless steelAdjustment VA/HA: thread/threadApproval: Parts certificate (§19.3) Compatible vehicles:Manufacturer Model Version Body Fuel Performance Displacement Cylinder DriveBMW 1 Series Coupe (E82) 182, 1C, M-V 10/2006-10/2013 M Coupe petrol 250 KW 2979 ccm 6 rear-wheel driveBMW 3 Series (E90) 390L, 390X, 3L, M3, M3 GTS, M390 02/2004-02/2012 M3 notchback petrol 309 KW 3999 ccm 8 rear-wheel driveBMW 3 Series Convertible (E93) 392C, 3C, M3, M390 05/2006-12/2013 M3 Convertible petrol 309 KW 3999 ccm 8 rear-wheel driveBMW 3 Series Coupe (E92) 390X, 392C, 3C, M-V, M3, M3 GTS, M390 01/2005-12/2013 M3 Coupe petrol 309 KW 3999 ccm 8 rear-wheel drive

€3,336.76*

Ventilation cover ID8 Carbon | fits BMW M2/M3/M4 incl. Competition (G80/G81/G82/G83/G87) | Aulitzky Tuning

The carbon centre panel for the air outlets gives the interior of the G8X (ID 8) a first-class upgrade. The trim is woven in OEM style and matches other factory carbon interior trim perfectly. The high-gloss surface ensures a very high-quality appearance. The trim is particularly eye-catching as it is located right in the centre of the dashboard. As an ultra-modern carbon fibre part, it is constantly in the field of vision and reminds you that you are driving something special. When you buy Pre-Preg carbon fibre, you are investing in a higher quality and more durable material that will outlast other forms of carbon fibre and potentially save you money in the long run. Details:- 100% carbon fibre construction- High gloss finish- Fit guarantee- registration free Scope of delivery:1x interior ventilation cover Compatible vehicles (only with ID8*):- BMW G87 M2 - BMW G80 M3 incl. Competition Saloon (2021+)- BMW G81 M3 incl. Competition Touring (2023+)- BMW G82 M4 incl. Competition Coupé (2021+)- BMW G83 M4 incl. Competition Convertible (2021+)*NOT suitable for ID8.5! Note: This is NOT an original BMW product!

€199.00*

Turbo outlet | fits VAG 1.8/2.0 TSI EA888 EA888 Gen.3 Golf 7 GTI/R, Polo GTI, S1 8X, S3 8V, TTS 8S, Leon Cupra 5F, Octavia RS 5E etc. | Wagner Tuning

The Wagner Tuning Turbo Outlet has been developed to optimize the performance and responsiveness of vehicles with EA888 Gen.3 engines. Suitable for a wide range of VW, Audi, Skoda and Seat models, this turbo outlet offers a plug-and-play replacement for the standard part. It is specially designed to improve the air mass flow rate at the turbocharger outlet and thus achieve a higher maximum output. The Wagner Tuning Turbo Outlet for VAG EA888 Gen.3 with IHI Turbocharger IS38 is suitable for:Audi A1 8X 1.8TSI (MKB:DAJB) 141KW/191hpAudi S1 8X 2.0TSI (MKB:CWZA) 170-188KW/231-256hpAudi A3 8V 1.8 TSI (MKB:CJSB, CJSA) 132KW/180hpAudi S3 8V 2.0 TSI (MKB:CJXB, CJXF, CJXC, CJXD, DJHB, CJXG, DJHA) 206-228KW/280-310hpAudi TT 8S 2.0TSI (MKB: CHH) 169KW/230hpAudi TTS 8S 2.0 TSI (MKB: CJXG) 228KWSeat Ibiza 6J/6P 1.8TSI (MKB:DAJA) 141KW/191hpSeat Leon 5F 1.8 TSI (MKB:CJSA) 132/180hpSeat Leon 5F Cupra R/290/300 2.0 TSI (MKB:CJXE, CJXA, CJXH, CJXC) 195-221KW/265-300hpSkoda Octavia 5E 1.8TSI (MKB:CJSB) 132KW/180hpSkoda Octavia 5E RS 2.0TSI (MKB:CHHB, CHHA, DLBA) 162-180KW/220-245hpSkoda Superb 3T (3V) 4x4 2.0 TSI (MKB:CJXA) 206KW/280hpVW Golf VII 1.8 4x4 TSI (MKB:CJSB) 132KW/180hpVW Golf VII 2.0 R TSI (MKB:CJXB, CJXG, CJXC, DJHA) 206-228KW/280-310hpVW Golf VII GTI 2.0TSI (MKB:CHHA, CHHB, CXDA, CXCB, CHHA, DLBA, DNUC, CJXE, CJXG) 162-228KW/220-310hp (incl. Performance + TCR + Clubsport +CS S)VW Polo 6C GTI 1.8TSI (MKB: DAJA, DAJB(DSG)) 141KW/192hpVW Polo AW1 GTI 2.0TSI (MKB:CZPC) 147KW/200hpVW Tiguan 5N(AD1) 2.0 TSI 4Motion (MKB:CZPA) 132KW180hpVW Passat 3C 2.0TSI (MKB:CHHB, CXDA, CJXA) 162-206KW/220-280hp Optimized performance: The Turbo Outlet increases the inner diameter from Ø40mm to Ø44mm, resulting in a cross-sectional increase of almost 22% for improved performance and responsiveness.High-quality construction: Made from high-strength aluminum alloy and CNC-machined in Germany for outstanding quality and durability.Easy installation: The Turbo Outlet is supplied as a plug-and-play solution and is easy to install with no additional modifications required.Black anodization: The black anodization gives the Turbo Outlet an appealing look and protects it from corrosion. With the Wagner Tuning Turbo Outlet, you can take your vehicle's performance and driving experience to a new level while benefiting from easy installation and high-quality materials. Scope of delivery:1 x Turbo Outlet (exhaust nozzle) Attention: Not approved in the area of the StVZO.

€120.00*

V4 Clubsport coilover suspension | fits BMW 1 Series/3 Series M/M3 (E82/E90/E92/E93) N54 | 39720267 | KW

KW V4 Clubsport coilover suspension With an uncompromising technology transfer from racing to the road, the KW Clubsport coilovers convince. The KW Clubsport coilovers convince with their uncompromising combination of high-end racing technology with maintenance-free KW original equipment components and expert opinions. This gives you the ideal accessories to exploit the full potential of your sports car at trackdays, sports driver courses, tourist drives on Grand Prix circuits and on the Nürburgring Nordschleife. Developed for the toughest race track in the world: The Nürburgring Nordschleife Already in their basic setup, the KW Clubsport coilovers are tuned to the different track surfaces, steep curves, jump hills and chicanes of the 20.8 kilometer long Nürburgring Nordschleife. After all, as one of the most successful suspension manufacturers and suppliers in motorsport, we are at home on the Nordschleife. In the VLN Endurance Championship alone, we equip over 70 racing teams and, as a suspension manufacturer, have supported six overall victories at the ADAC Zurich 24h Race Nürburgring in ten years. The winner of the ADAC GT Masters 2011 also relies on our racing expertise, from which the KW Clubsport coilovers benefit. The basic setup of the KW V3 Clubsport and KW V4 Clubsport with separate expansion tank is perfectly adapted to the Nordschleife and allows you to customize your sports car even more individually to the desired sports tire setup thanks to the numerous adjustment options. KW V4 Clubsport coilover suspension The vehicle-specific basic setup of the KW V4 Clubsport, developed in numerous test and measurement drives on the Nordschleife and the KW 7-post driving dynamics test bench, can be further adapted with the click adjustment for your wheel loads, vehicle weight and the changed body stiffness, for example by a bolted cage, welded-in safety cell or strut braces. Similar to the KW Competition racing suspensions used in international motorsport, the KW V4 Clubsport coilover suspension allows the compression damping to be fine-tuned separately in the low-speed and high-speed range. The click adjustment of the patented KW two-valve control takes place directly on the expansion tank. You can manually adjust the low-speed compression damping with six precise clicks on the purple adjustment wheel. The gold-colored adjustment wheel underneath allows you to change the high-speed compression stage of the recommended basic setup for your track day with 14 exact clicks. Independently of this, you still have 16 clicks at your disposal to make noticeable adjustments to the rebound setting. If you want to tune the KW V4 Clubsport coilover suspension, which is available with an expert opinion, more comfortably for your journey to the Nordschleife or other race track for driving on the highway, simply reduce the rebound forces via the rebound damping. - freely adjustable damping technology with 16 precise clicks in the rebound stage - adjustable compression damping with 6 clicks in the low-speed range and 14 exact clicks in the high-speed range - stepless lowering - Tested adjustment range - high-quality components for a long service life - unique, independently acting damping force adjustment available with aluminum Unibal support bearing for technically sensible applications Setup: Application range and damper tuning The KW V4 Clubsport coilovers convince with their vehicle-specific setup for trackday events on the Nürburgring Nordschleife, as well as the possibility to quickly tune these suspensions for other race tracks and individual performance sports cars. Please note the conditions and instructions for this product: - Front axle + rear axle height-adjustable (Front axle coilover struts, rear axle springs with height adjustment + dampers). - Dampers have easy-to-use adjustment wheels. Due to the design, the rebound stage can only be adjusted if the piston rod is accessible. - Clubsport suspension with support bearing: only available with front axle support bearing Technical information: Lowering front/rear (mm): 10-35/5-25 Version: V4 Clubsport Hardness adjustment: Rebound and compression damping Material: Stainless steel Adjustment front/rear: thread/thread Approval: Parts certificate (§19.3) Compatible vehicles: Manufacturer Model Version Body Fuel Performance Displacement Cylinder Drive BMW 1 Series Coupe (E82) 182, 1C, M-V 10/2006-10/2013 M Coupe Petrol 250 KW 2979 ccm 6 Rear-wheel drive BMW 3 Series (E90) 390L, 390X, 3L, M3, M3 GTS, M390 02/2004-02/2012 M3 notchback gasoline 309 KW 3999 ccm 8 rear-wheel drive BMW 3 Series Convertible (E93) 392C, 3C, M3, M390 05/2006-12/2013 M3 Convertible gasoline 309 KW 3999 ccm 8 rear-wheel drive BMW 3 Series Coupe (E92) 390X, 392C, 3C, M-V, M3, M3 GTS, M390 01/2005-12/2013 M3 Coupe gasoline 309 KW 3999 ccm 8 rear-wheel drive

€5,324.06*

KW V1 coilover suspension inox | fits BMW 3/4 Series M340/320d/330d/430d/M440 xDrive (G21/G22) | 102200CZ | 102200DA

Ratenrechner

Ask a question

Previously asked questions