KW V1 coilover suspension inox | fits BMW 3/4 Series 330d/M440i (G21/G26) | 102200DV | 102200DX

From €1,523.20*

Delivery time: Availability on request at Aulitzky Tuning*

Does the vehicle have electronic damper control?

YES

Optional: Installation on site at Aulitzky Tuning

- Installation and removal of coilover suspension
- Wheel camber correction kit
- Wheel alignment
- Calibration of assistance systems/lights
- Individual suspension tuning according to customer requirements
- Individual test drive and adjustment together with the customer

Assembly at location DE-91564 Neuendettelsau

Reset choice

€0.00*

Finanzieren Sie ihren Einkauf über die Targobank.

Product number: KW102200DVX

Product information "KW V1 coilover suspension inox | fits BMW 3/4 Series 330d/M440i (G21/G26) | 102200DV | 102200DX"

KW V1 coilover suspension

Sportiness paired with outstanding looks. With factory pre-configured damping.
Our entry-level model for more driving pleasure through an appealing and individually adjustable lowering is the KW V1 coilover suspension in the KW typical "inox-line". Thanks to its high-quality workmanship, the consistent use of stainless steel struts, corrosion-resistant springs and harmonised components, it stands for many years of driving pleasure - and not just for the life of the car.

Stepless lowering
The KW V1 enables maximum lowering within the tested adjustment range. This varies depending on the vehicle model and can, for example, be between 30 and 70 millimetres or 50 to 90 millimetres for an individual lowering. Thanks to the dirt-resistant trapezoidal thread and the polyamide threaded ring, the stepless lowering can be varied quickly and easily even years later. Depending on the vehicle, lowering is carried out either on the wheel-guiding KW stainless steel suspension struts or, in the case of non-wheel-guiding double-wishbone rear axles, on the rear axle height adjustment.

The benchmark for sporty, dynamic tuning fans
With its harmonious basic set-up for sporty driving on the road, the KW V1 convinces the discerning tuning fan. Our development engineers determine a specific damper set-up and spring rate for each vehicle in order to enhance your driving pleasure with the optimum balance of sportiness and suitability for everyday use. After all, you are not buying just any coilover suspension, but a KW coilover suspension that has been specially developed and tuned for your vehicle type. As a manufacturer, KW only uses its own resources, high-quality components and the same damper technology as mass-produced manufacturers. With the KW V1, the rolling and rolling movements of the vehicle body are reduced during compression, allowing you to benefit from unadulterated directness and sportier handling when driving.

Our experience for your driving pleasure
As a manufacturer of customised suspension solutions for road and racing, we have been the market leader and innovation driver for over 25 years. No matter where in the world, sporty drivers, car manufacturers and tuners rely on our KW coilovers "Made in Germany". Every KW coilover suspension is subjected to extensive load tests during production and is developed and manufactured directly at our company headquarters in Fichtenberg, Swabia, in order to fulfil the high standards of our KW quality management. As a German manufacturer, it is a matter of course for us to offer a multi-year warranty on our KW coilover suspension kits, which exceed OEM quality and cover over 4,600 applications. When installed by one of our KW specialist dealers, the warranty is up to five years.

- Optimally adjusted in advance
- sporty and harmonious damping technology
- Stainless steel technology "inox-line"
- Individually height-adjustable
- Tested adjustment range
- Ready-to-install complete solution
- High-quality components for a long service life
- Complete documentation for easy handling

Setup - factory pre-configured damping setup
The KW V1 has a vehicle-specific, permanently configured damper setup. The springs and dampers are perfectly matched to each other so that you experience an optimum balance of sportiness and suitability for everyday use when driving.

Even with a full payload and maximum axle loads, the dampers always work with a sporty characteristic curve. The KW V1 is particularly interesting for tuning enthusiasts who prioritise the show & shine concept.

Please note the conditions and instructions for this product:
- VA + HA height-adjustable (VA coilover struts, HA springs with height adjustment + dampers)
- Vehicles with electronic damper control must be decommissioned. Electronics kit for decommissioning is included in the scope of delivery for the “YES” article variant.

Technical information:
Lowering VA/HA (mm): 40-60/40-60
Version: V1
Hardness adjustment: none
Material: Stainless steel
Adjustment VA/HA: thread/thread
Approval: Parts certificate (§19.3)

Compatible vehicles:
Manufacturer Model Version Body Fuel Performance Displacement Cylinder Drive
BMW 3 Series Touring (G21, G81) G3K 07/2019- 330 d Estate Diesel 195 KW 2993 ccm 6 rear-wheel drive
BMW 3 Series Touring (G21, G81) G3K 07/2019- 330 d Mild-Hybrid Estate Diesel/Electric 210 KW 2993 ccm 6 rear-wheel drive
BMW 4 Series Gran Coupe (G26) 07/2021- M440 i Mild-Hybrid Coupe petrol/electric 275 KW 2998 ccm 6 rear-wheel drive

Please enter a valid email address.

Your question *

Please enter a valid question.

I agree that my data will be processed to answer the question. I have taken note of the Privacy Policy and agree to the information described therein.*

To continue, enter the characters shown above*

Fields marked with * are mandatory.

There aren't any asked questions yet.

Zuletzt gesehene Produkte

Tip

Aulitzky Exhaust | ECE downpipe with sports catalyst | fits BMW 540i/640i OPF (G30/G31/G32) B58 from 08/2019

Facts: - 4.49“ (114mm) > 3” (76mm), replaces the main catalyst - with 200 cell stainless steel sports catalyst - Euro 6 compatible - for current OPF models - with Thermo-Integral insulation (for an extra charge) - with ECE approval* Compatible vehicles:VehicleVehicle typePowerEngine capacityEngine typeYear of construction BMW 5 Series (G30/G31)540i / xDrive250kW / 340hp2998cm³B58 B30 A, B58 B30 C08.19 - 06.20 BMW 5 Series (G30/G31)540i / xDrive265kW / 360hp2998cm³B58 B30 A08.19 - 06.20 BMW 6 Series (G32)640i / xDrive250kW / 340hp2998cm³B58 B30 A, B58 B30 C08.19 - 06.20 BMW 6 Series (G32)640i / xDrive265kW / 360hp2998cm³B58 B30 A, B58 B30 C08.19 - 06.20 Note: Depending on the software version, the engine control light may come on. We recommend the purchase of an OFF set module or software customisation. *This downpipe has ECE approval so that it can be used within the scope of the StVZO without registration in the vehicle documents.

From €2,256.00*

Details

KW V5 Clubsport coilover suspension | fits Porsche 911 (992) GT3 (with standard lift system) | 3090171096

KW V5 Clubsport coilover suspension The new 4-way adjustable KW V5 Clubsport offers the latest KW Solid Piston GT3 motorsport suspension technology for the sportiest road cars with sports tyre setup for use on the race track and on the road. The entire suspension design of the KW V5 Clubsport coilover suspension with its unibal bearings is designed for the use of semi-slick tyres on close-to-production vehicles. KW Solid Piston Technology for the race track and road In contrast to vibration dampers with overflowed working pistons, KW uses its KW Solid Piston Technology (displacement piston design), which is proven in motorsport and homologated for vehicles such as the BMW M4 GT3 and Porsche 911 GT3 R, in the KW V5 Clubsport coilover suspension. The compression and rebound valves, which can be adjusted separately in the low-speed and high-speed forces, are arranged separately from the damper inner tube and the piston rod. As a result, the KW V5 Clubsport with adjustable KW SPCLH-A (KW Solid Piston Compression Low- and Highspeed Adjustable) compression damping and the KW SPRLH-A (KW Solid Piston Rebound Low- and Highspeed Adjustable) rebound damping offers significant added value. - More sensitive and high-frequency damping - Cavitation-free function - Low-pressure gas range from 6 to 10 bar - Unique, independently acting damper force adjustment - Freely adjustable damping technology for compression and rebound damping - Adjustable low-speed compression damping with 13 exact clicks - Adjustable high-speed compression damping with 13 exact clicks - Adjustable low-speed rebound damping with 13 exact clicks - Adjustable high-speed rebound damping with 13 exact clicks - Stepless lowering - Tested adjustment range - Aluminium Unibal support bearing - parts certificate - High-quality components for a long service life The bodywork remains perfectly supported during aggressive steering manoeuvres and extreme compression. Thanks to the adjustable multi-valve technology, the KW V5 Clubsport absorbs bumps and relatively large transverse joints cleanly. Even when hitting curbs, near-series sports cars remain safely controllable with the KW V5 Clubsport coilover suspension. The height adjustment options allow the wheel loads to be adapted. The adjustment options, combined with the damping technology (SPCLH-A and SPRLH-A technology), which can be adjusted separately in compression and rebound, enable individual setups to suit the vehicle weight, tyre characteristics, different track conditions and operating conditions - thanks to multi-valve technology and parts certificates, the KW V5 Clubsport coilover suspension can also be used on public roads. Setup: Application range and damper tuning The KW V5 Clubsport coilover suspension with its KW Solid Piston Technology is the ideal upgrade to drive near-series sports cars safely and quickly with semi-slick tyres on trackdays and tourist drives on race tracks. Thanks to the parts certificate, the KW V5 Clubsport can also be used in everyday life on public roads. Please note the conditions and instructions for this product: - VA + HA height-adjustable (coilover struts) - The dampers have easy-to-use adjustment wheels. Due to the design, the rebound stage can only be adjusted when the piston rod is accessible. - Electronic damper control must be deactivated. Electronic kit for deactivation is included in the scope of delivery. - Clubsport suspension with support bearing: available with VA + HA support bearing Technical information: Lowering VA/HA (mm): 0-5/0-5 Version: V5 Clubsport Height adjustment: Rebound and compression damping Material: Stainless steel Adjustment VA/HA: thread/thread Approval: Parts certificate (§19.3) Compatible vehicles: Manufacturer Model Version Body Fuel Performance Displacement Cylinder Drive PORSCHE 911 (992) 11/2018- GT3 (992810) Coupe petrol 375 KW 3996 ccm 6 rear-wheel drive Only models from year of construction: 02/2021- Axle load VA/HA (kg): -750/-1040 For vehicles with standard lift system

€12,470.01*

KW V5 Clubsport coilover suspension | fits Porsche 911 (992) GT3 (without standard lift system) | 3090171093

KW V5 Clubsport coilover suspension The new 4-way adjustable KW V5 Clubsport offers the latest KW Solid Piston GT3 motorsport suspension technology for the sportiest road cars with sports tyre setup for use on the race track and on the road. The entire suspension design of the KW V5 Clubsport coilover suspension with its unibal bearings is designed for the use of semi-slick tyres on close-to-production vehicles. KW Solid Piston Technology for the race track and road In contrast to vibration dampers with overflowed working pistons, KW uses its KW Solid Piston Technology (displacement piston design), which is proven in motorsport and homologated for vehicles such as the BMW M4 GT3 and Porsche 911 GT3 R, in the KW V5 Clubsport coilover suspension. The compression and rebound valves, which can be adjusted separately in the low-speed and high-speed forces, are arranged separately from the damper inner tube and the piston rod. As a result, the KW V5 Clubsport with adjustable KW SPCLH-A (KW Solid Piston Compression Low- and Highspeed Adjustable) compression damping and the KW SPRLH-A (KW Solid Piston Rebound Low- and Highspeed Adjustable) rebound damping offers significant added value. - More sensitive and high-frequency damping - Cavitation-free function - Low-pressure gas range from 6 to 10 bar - Unique, independently acting damper force adjustment - Freely adjustable damping technology for compression and rebound damping - Adjustable low-speed compression damping with 13 exact clicks - Adjustable high-speed compression damping with 13 exact clicks - Adjustable low-speed rebound damping with 13 exact clicks - Adjustable high-speed rebound damping with 13 exact clicks - Stepless lowering - Tested adjustment range - Aluminium Unibal support bearing - parts certificate - High-quality components for a long service life The bodywork remains perfectly supported during aggressive steering manoeuvres and extreme compression. Thanks to the adjustable multi-valve technology, the KW V5 Clubsport absorbs bumps and relatively large transverse joints cleanly. Even when hitting curbs, near-series sports cars remain safely controllable with the KW V5 Clubsport coilover suspension. The height adjustment options allow the wheel loads to be adapted. The adjustment options, combined with the damping technology (SPCLH-A and SPRLH-A technology), which can be adjusted separately in compression and rebound, enable individual setups to suit the vehicle weight, tyre characteristics, different track conditions and operating conditions - thanks to multi-valve technology and parts certificates, the KW V5 Clubsport coilover suspension can also be used on public roads. Setup: Application range and damper tuning The KW V5 Clubsport coilover suspension with its KW Solid Piston Technology is the ideal upgrade to drive near-series sports cars safely and quickly with semi-slick tyres on trackdays and tourist drives on race tracks. Thanks to the parts certificate, the KW V5 Clubsport can also be used in everyday life on public roads. Please note the conditions and instructions for this product: - VA + HA height-adjustable (coilover struts) - The dampers have easy-to-use adjustment wheels. Due to the design, the rebound stage can only be adjusted when the piston rod is accessible. - Electronic damper control must be deactivated. Electronic kit for deactivation is included in the scope of delivery. - Clubsport suspension with support bearing: available with VA + HA support bearing - Not for vehicles with standard lift system Technical information: Lowering VA/HA (mm): 0-5/0-5 Version: V5 Clubsport Height adjustment: Rebound and compression damping Material: Stainless steel Adjustment VA/HA: thread/thread Approval: Parts certificate (§19.3) Compatible vehicles: Manufacturer Model Version Body Fuel Performance Displacement Cylinder Drive PORSCHE 911 (992) 11/2018- GT3 (992810) Coupe petrol 375 KW 3996 ccm 6 rear-wheel drive Only models from year of construction: 02/2021- Axle load VA/HA (kg): -750/-1040 For vehicles without standard lift system

€12,470.01*

KW V1 coilover suspension inox | fits BMW 3/4 Series 330d/M440i (G21/G26) | 102200DV | 102200DX

Ratenrechner

Ask a question

Previously asked questions