Free shipping
info@aulitzkytuning.de
+49 (0)9874 6891630

KW V1 coilover suspension inox | fits BMW 2/3 Series M240i/M340i/M340d/330d xDrive (G42/G20) | 102200DK | 102200DM

From €1,523.20*

Delivery time: Availability on request at Aulitzky Tuning*

Does the vehicle have electronic damper control?
Optional: Installation on site at Aulitzky Tuning

- Installation and removal of coilover suspension
- Wheel camber correction kit
- Wheel alignment
- Calibration of assistance systems/lights
- Individual suspension tuning according to customer requirements
- Individual test drive and adjustment together with the customer

Assembly at location DE-91564 Neuendettelsau
Reset choice
€0.00*
Product number: KW102200DKM
Product information "KW V1 coilover suspension inox | fits BMW 2/3 Series M240i/M340i/M340d/330d xDrive (G42/G20) | 102200DK | 102200DM"

KW V1 coilover suspension

Sportiness paired with outstanding looks. With factory pre-configured damping.
Our entry-level model for more driving pleasure through an appealing and individually adjustable lowering is the KW V1 coilover suspension in the KW typical "inox-line". Thanks to its high-quality workmanship, the consistent use of stainless steel struts, corrosion-resistant springs and harmonised components, it stands for many years of driving pleasure - and not just for the life of the car.

Stepless lowering
The KW V1 enables maximum lowering within the tested adjustment range. This varies depending on the vehicle model and can, for example, be between 30 and 70 millimetres or 50 to 90 millimetres for an individual lowering. Thanks to the dirt-resistant trapezoidal thread and the polyamide threaded ring, the stepless lowering can be varied quickly and easily even years later. Depending on the vehicle, the lowering is carried out either on the wheel-guiding KW stainless steel suspension struts or on the rear axle height adjustment for non-wheel-guiding double-wishbone rear axles.

The benchmark for sporty, dynamic tuning fans
With its harmonious basic set-up for sporty driving on the road, the KW V1 convinces the discerning tuning fan. Our development engineers determine a specific damper set-up and spring rate for each vehicle in order to increase your driving pleasure with the optimum balance of sportiness and suitability for everyday use. After all, you are not buying just any coilover suspension, but a KW coilover suspension that has been specially developed and tuned for your vehicle type. As a manufacturer, KW only uses its own resources, high-quality components and the same damper technology as mass-produced manufacturers. With the KW V1, the rolling and rolling movements of the vehicle body are reduced during compression, allowing you to benefit from unadulterated directness and sportier handling when driving.

Our experience for your driving pleasure
As a manufacturer of customised suspension solutions for road and racing, we have been the market leader and innovation driver for over 25 years. No matter where in the world, sporty drivers, car manufacturers and tuners rely on our KW coilovers "Made in Germany". Every KW coilover suspension is subjected to extensive load tests during production and is developed and manufactured directly at our company headquarters in Fichtenberg, Swabia, in order to fulfil the high standards of our KW quality management. As a German manufacturer, it is a matter of course for us to provide a multi-year warranty on our KW coilover suspension kits, which exceed OEM quality and cover over 4,600 applications. When installed by one of our KW specialist dealers, the warranty is up to five years.

- Optimally adjusted in advance
- sporty and harmonious damping technology
- Stainless steel technology "inox-line"
- Individually height-adjustable
- Tested adjustment range
- Ready-to-install complete solution
- High-quality components for a long service life
- Complete documentation for easy handling

Setup - factory pre-configured damping setup
The KW V1 has a vehicle-specific, permanently configured damper setup. The spring and damper are perfectly matched to each other so that you experience an optimum balance of sportiness and suitability for everyday use when driving.

Even with a full payload and maximum axle loads, the dampers always work with a sporty characteristic curve. The KW V1 is particularly interesting for tuning enthusiasts who prioritise the show & shine concept.

Please note the conditions and instructions for this product:
- VA + HA height-adjustable (VA coilover struts, HA springs with height adjustment + dampers)
- Vehicles with electronic damper control must be decommissioned. Electronics kit for decommissioning is included in the scope of delivery for the “YES” article variant.

Technical information:
Lowering VA/HA (mm): 40-60/40-60
Version: V1
Hardness adjustment: none
Material: Stainless steel
Adjustment VA/HA: thread/thread
Approval: Parts certificate (§19.3)

Compatible vehicles:
Manufacturer Model Version Body Fuel Performance Displacement Cylinder Drive
BMW 2 Series Coupe (G42, G87) 08/2021- M240 i xDrive Coupe petrol 275 KW 2998 ccm 6 all-wheel drive
BMW 3 Series (G20, G80) G3L 11/2018- 330 d Mild-Hybrid xDrive notchback diesel/electric 210 KW 2993 ccm 6 all-wheel drive
BMW 3 Series (G20, G80) G3L 11/2018- 330 d xDrive notchback diesel 195 KW 2993 ccm 6 all-wheel drive
BMW 3 Series (G20, G80) G3L 11/2018- M 340 i Mild-Hybrid xDrive notchback petrol/electric 275 KW 2998 ccm 6 all-wheel drive
BMW 3 Series (G20, G80) G3L 11/2018- M 340 i xDrive notchback petrol 275 KW 2998 ccm 6 all-wheel drive
BMW 3 Series (G20, G80) G3L 11/2018- M 340 i xDrive notchback petrol 285 KW 2998 ccm 6 all-wheel drive
BMW 3 Series (G20, G80) G3L 11/2018- M340 d Mild-Hybrid xDrive notchback diesel/electric 250 KW 2993 ccm 6 all-wheel drive

Please enter a valid email address.
Please enter a valid question.
Fields marked with * are mandatory.

There aren't any asked questions yet.
Zuletzt gesehene Produkte

Zuletzt gesehene Produkte

Brake upgrade kit 380x35mm perforated | fits Audi RS4/RS5 B8 (8K/8T) | parts certificate | MOVIT
A powerful brake is one of the most important components in motorsport. With these upgrade kits, the necessary balance of performance, weight and durability has been perfectly combined through the uncompromising selection of materials, so that this product can meet the high demands of extreme automotive applications. To achieve this, MOV'IT has increased the diameter and thickness of the brake discs and used more cross holes. Each pre-cast hole is re-drilled and countersunk to achieve a more favourable flow. The brake disc's optimised DDE ventilation system has an 80% larger surface area compared to other brake discs, resulting in a significant reduction in temperature and wear. Attention: The conversion means that only rims with at least 19 inches can be fitted! The chassis number of the vehicle on which the brakes are fitted is required for the parts certificate. Features: - Upgrade kit front axle, 380mm, 2-piece disc, perforated - incl. parts certificateDetails:MOVIT steel brake discs, 2-piece- Highly efficient cooling system- Double, directional ventilation- Special alloy- High thermal conductivity- Highest fading resistanceMOVIT sports brake pads, front axle- Optimally compatible with MOVIT brake discs- Maximum durability with low wear- With road approval- Low noise development- Low base temperature for the perfect coefficient of frictionMOVIT steel flex lines, front and rear axle- Better response behaviour of the brake system- Durable quality (does not become porous and therefore does not leak)- Brake line does not expand under pressure- Harder and more constant pressure point- Improved modulation Scope of delivery: - 2x brake disc left/right incl. brake pot - 1x mounting material - 1x installation instructions and running-in instructions - 1x parts certificate Compatible vehicles:Audi A4 B8 (8K5) Avant RS4 quattro 331kW / 450PS / 4163cm³Audi A5 (8T3) RS5 quattro 331kW / 450PS / 4163cm³ Notes:When installing the upgrade kit, we always recommend replacing the brake pads, as the use of used pads on new brake discs is not recommended.When installed in our factory, the conversion is carried out exclusively with new brake pads!

€1,559.00*
Roof antenna Carbon | fits BMW M5/5er/i5/7er (G90/G99/G60/G70) | Aulitzky Tuning
The roof antenna made of pre-preg carbon fibre gives your vehicle a very modern look. Details:- Constructed from 100% pure pre-preg carbon fibre- OEM style weave- High-gloss finish- Perfect fit- registration free Scope of delivery:1x carbon roof antenna Compatible vehicles:BMW M5 G90BMW M5 G99BMW i5 G60BMW 5 Series G60BMW 5 Series G61BMW 5 Series G68BMW 7 Series G70Note: This is NOT an original BMW product!

€129.00*
Charge Pipe Aluminium black | fits BMW M340i/M440i/M40i (G20/G28/G21/G22/G26/G29) B58 | Aulitzky Tuning
Facts: - Charge pipe made of T-6061 aluminium in black - incl. mounting rubbers, clamps - without licence Compatible vehicles:BMW 3 (G20, G28) (2018-) M 340 i xDrive (B58 B30 B) 2998cm³ 374hp (275kW) 2019 -BMW 3 (G20, G28) (2018-) M 340 i xDrive (B58 B30 B) 2998cm³ 387PS (285kW) 2019 -BMW 3 (G20, G28) (2018-) M 340 i Mild-Hybrid xDrive (B58 B30 B, JA1) 2998cm³ 374PS (275kW) 2020 -BMW 3 Touring Van (G21) (2019-) M 340 i xDrive (B58 B30 B) 2998cm³ 374PS (275kW) 2019 -BMW 4 Coupe (G22) (2020-) M 440 i Mild-Hybrid (B58 B30 B, JA1) 2998cm³ 374PS (275kW) 2021 -BMW 4 Gran Coupe (G26) (2021-) M440 i Mild-Hybrid (B58 B30 B) 2998cm³ 374PS (275kW) 2022 -BMW Z4 Roadster (G29) (2018-) M40 i (B58 B30 C) 2998cm³ 340PS (250kW) 2018 - Attention: Not approved in the area of the StVZO.

€780.00*
Rear wing 570-VX Aero Carbon with Carbon supports | fits McLaren 570S | Vorsteiner
Vorsteiner 570-VX Aero Carbon rear wing with carbon supports for McLaren 570S Expertise: Material certificate Compatible vehicles:MCLAREN 570S 3.8 Since 2015MCLAREN 570S Spider 3.8 Since 2017

€7,853.00*