Free shipping
info@aulitzkytuning.de
+49 (0)9874 6891630

Intake system Carbon | fits Mercedes-Benz C63/S AMG (W205) | Eventuri

€3,290.00*

Delivery time: approx. 2-6 weeks. Exact delivery time on request*.

Variant
This field is a required field.
This field is a required field.
Product number: EV5195-EV5520
Product information "Intake system Carbon | fits Mercedes-Benz C63/S AMG (W205) | Eventuri"

Facts:
35% more airflow
Up to 30 hp power increase
84% larger air intake
Full carbon fibre look
High-flow panel filter
Manufacturer: Eventuri
Material: Carbon
Parts certificate: A certificate is available for this product for certain regions and vehicles (details below)

The Mercedes W205 C63/S AMG intake system is the culmination of extensive development and testing. Our design consisted of 3 main objectives:
1) Increased flow
2) Low inlet temperatures
3) Smooth airflow
The first objective was achieved by utilising all the limited space in the engine bay of the C63S, resulting in a 35% higher flow rate compared to the original system. The second goal was achieved by developing a fully enclosed system. The C63S engine bay reaches high temperatures with heat sources such as the turbos in close proximity to the intake system, so it is critical that the intake system remains sealed. The end goal was achieved by designing an organically moulded system with individual rounded panel filters to ensure the airflow path contained no sharp corners, keeping the flow laminar. With smooth transitions from the filters to the turbo inlets, our intake system minimises the creation of turbulence, allowing the turbos to operate more efficiently.When all 3 objectives are achieved, our intake system for the W205 C63(S) delivers on all fronts and allows the turbos to generate boost more efficiently. This leads to improved throttle response and real power gains, which increase the more power the engine has.

As there are various turbo upgrades available for the C63/S, we have also developed a special solution for larger turbos.
Our C63/S intake is available in 2 configurations:
61 mm ID outlets to fit standard turbos and 76.5 mm ID outlets to fit larger turbos.

Power increase: Stage 2 C63S: 22-30hp, 20-24ft-lb
Power increase: Original C63S: 10-12hp, 12-15ft-lb

Dyno tests were performed on both a full C63S and a Stage 2 C63S with downpipes and software optimisation. Below is the dyno chart for the Stage 2 car that had the same tune for all runs and only the airbox was changed. It is important to note that the bonnet was closed for all runs to simulate road conditions. Dyno tests with the bonnet open - especially with open conical intakes - do not give a reliable indication of how the intake system affects performance. On the road, the bonnet is closed and so all the heat from the turbos is retained in the engine bay. On the C63S, this intense heat is a problem, which is why a closed system is so important. As the higher air temperature is less dense, the turbos don't make as much pressure, resulting in lower power.Here, our fully sealed system shows that power increases linearly after 4800 rpm, where the airflow requirement increases and the original airboxes become a restriction. These power gains were measured after only the original airbox was swapped for the Eventuri intake system - all other changes were present for both the original airbox and the Eventuri intake system.The gains measured on the dyno translate to increased part-throttle and full-throttle response on the road, with the car pulling much more eagerly to redline. Testing was conducted back-to-back on the same day and temperatures were monitored to ensure consistency. The car was first tested with the bonnet closed. We then left the car on the dyno and installed the Eventuri. The car was then driven again - bonnet closed. Several runs were carried out with both configurations to achieve a consistent result.

Parts certificate
The manufacturer's specifications apply to the installation. An existing certificate is no guarantee that the product can also be installed in the corresponding vehicle.

A certificate is available for this product for the following regions and vehicles:
* DE/AT: Vehicle registration document, field K --- CH/LI: Vehicle licence, field 24
Country Model Type approval*
DE/AT AMG C 63 e1*2001/116*0431*..
DE/AT AMG C 63 e1*2001/116*0457*..
DE/AT AMG C 63 e1*2001/116*0463*..
DE/AT AMG C 63 e1*2001/116*0464*..
DE/AT AMG C 63 S e1*2001/116*0431*..
DE/AT AMG C 63 S e1*2001/116*0457*..
DE/AT AMG C 63 S e1*2001/116*0463*..
DE/AT AMG C 63 S e1*2001/116*0464*..

Compatible vehicles:

Vehicle
Vehicle type
Power
Engine capacityEngine typeYear of construction
Mercedes C-Class (W205)
C63 AMG
350kW / 476hp3982cm³M 177.980
10.14 -
Mercedes C-Class (W205)
C63 S AMG
375kW / 510hp3982cm³
M 177.980
10.14 -

Please enter a valid email address.
Please enter a valid question.
Fields marked with * are mandatory.

There aren't any asked questions yet.
Zuletzt gesehene Produkte

Zuletzt gesehene Produkte

Charge- & Boostpipe Set aluminum black | fits BMW M2/M3/M4 incl. Competition/CS (F87/F80/F82/F83) S55 | Aulitzky Tuning
Facts: - Charge- & Boostpipe aluminium black - incl. mounting rubbers, clamps Compatible vehicles:VehicleVehicle typePowerEngine capacityEngine typeYear of construction BMW 3 Series (F80)M3317kW / 431hp2979cm³S55 B30 A03.14 - 10.18 BMW 3 Series (F80)M3 Competition331kW / 450hp2979cm³S55 B30 A03.16 - 10.18 BMW 3 Series (F80)M3 CS338kW / 460hp2979cm³S55 B30 A01.18 - 10.18 BMW 4 Series (F82/F83)M4317kW / 431hp2979cm³S55 B30 A03.14 - 07.20 BMW 4 Series (F82/F83)M4 Competition331kW / 450hp2979cm³S55 B30 A03.16 - 07.20 BMW 4 Series Coupe (F82)M4 CS338kW / 460hp2979cm³S55 B30 A07.17 - 06.19

€399.00*
Rear spoiler Carbon | fits BMW 5 Series/ M5 incl. Competition (G30/F90) | 3DDesign
A high-end kit for a high-end car. The new F90 gets a new, innovative look. The new AERO body kit from 3DDesign for the F90 fits seamlessly into the familiar, discreetly aggressive race style of the 3DDesign lines. The iconic design is complemented by a perfect fit and the usual uncompromising quality. The F90 spoiler is the real surprise in the body kit. There is no sign of the usual understatement with this aero spoiler. Steeply curved, the F90 spoiler is the most aggressive spoiler from 3DDesign to date. Curved far upwards, it is positioned directly in the airstream and provides the appropriate downforce. Performance spoiler for the F90, which is also a real visual upgrade! Pure luxury! Compatible vehicles:BMW 5 (G30, F90) 518 d 2018-2020BMW 5 (G30, F90) 518 d Mild-Hybrid 2020-2023BMW 5 (G30, F90) 520 d 2016-2023BMW 5 (G30, F90) 520 d Mild-Hybrid 2019-2023BMW 5 (G30, F90) 520 d Mild-Hybrid xDrive 2019-2023BMW 5 (G30, F90) 520 d xDrive 2016-2023BMW 5 (G30, F90) 520 i 2017-2023BMW 5 (G30, F90) 520 i Mild-Hybrid 2020-2023BMW 5 (G30, F90) 525 d 2017-2019BMW 5 (G30, F90) 530 d 2016-2020BMW 5 (G30, F90) 530 d Mild-Hybrid 2020-2023BMW 5 (G30, F90) 530 d Mild-Hybrid xDrive 2020-2023BMW 5 (G30, F90) 530 d xDrive 2016-2020BMW 5 (G30, F90) 530 e Plug-in Hybrid 2017-2023BMW 5 (G30, F90) 530 e Plug-in Hybrid xDrive 2017-2023BMW 5 (G30, F90) 530 i 2016-2020BMW 5 (G30, F90) 530 i Mild-Hybrid 2020-2023BMW 5 (G30, F90) 530 i Mild-Hybrid xDrive 2020-2023BMW 5 (G30, F90) 530 i xDrive 2016-2023BMW 5 (G30, F90) 540 d Mild-Hybrid xDrive 2020-2023BMW 5 (G30, F90) 540 d xDrive 2017-2020BMW 5 (G30, F90) 540 i 2016-2020BMW 5 (G30, F90) 540 i Mild-Hybrid 2020-2023BMW 5 (G30, F90) 540 i Mild-Hybrid xDrive 2020-2023BMW 5 (G30, F90) 540 i xDrive 2016-2020BMW 5 (G30, F90) 545 e Plug-in Hybrid xDrive 2020-2023BMW 5 (G30, F90) M 550 d xDrive 2017-2020BMW 5 (G30, F90) M 550 i xDrive 2017-2023BMW 5 (G30, F90) M5 2017-2023BMW 5 (G30, F90) M5 Competition 2018-2023  

€1,510.00*