Free shipping
info@aulitzkytuning.de
+49 (0)9874 6891630

Intake system Carbon | fits Audi RS3 (8V) 367hp | Eventuri

€2,014.00*

Delivery time: approx. 2-6 weeks. Exact delivery time on request*.

This field is a required field.
This field is a required field.
place a request
Product number: EV2379
Product information "Intake system Carbon | fits Audi RS3 (8V) 367hp | Eventuri"

Facts:
up to 30 hp more power
Material: Carbon
Manufacturer: Eventuri
Parts certificate: A certificate is available for this product for certain regions and vehicles (details below)

The new intake system for the Audi RS3 from Eventuri presents itself with vigour and power. The special look of the intake is the result of a months-long development process, interspersed with countless tests to generate the perfect airflow. The narrow but clear shape of the large scoop and the air duct for the air intake follows the well-known and patented Eventuri housing in which the large air filter sits.

Especially for the intake of the Audi RS3, the conical filter housing is followed by an inlet pipe with a diameter of 88 mm (standard 77 mm), which directs the laminar, compressed and maximally efficient airflow directly into the turbo and thus offers up to 30 hp more power.

The Eventuri RS3 Intake is supplied with a parts certificate, suitable for all vehicles listed above. The certificate does not exclude exhaust systems from other manufacturers.

The Eventuri Intake for the Audi RS3 comes in the following components:
Patented carbon filter housing
Efficient high-flow cone with urethane filter
Carbon scoop
88mm inlet pipe made from full carbon fibre
Widely curved housing for air intake
2-piece main heat shield
Laser-cut suspension
Parts certificate

Thanks to the curved conical shape of the housing and the ingenious routing of the airflow at the large intake of the scoop, the airflow is compressed and accelerated by the Venturi effect and thus channelled laminar into the turbo. This not only produces a fat sound but also a noticeable uplift in engine performance.

Parts certificate
The manufacturer's specifications apply for installation. An existing certificate is no guarantee that the product can also be installed in the corresponding vehicle.

A certificate is available for this product for the following regions and vehicles:
* DE/AT: Vehicle registration document, field K --- CH/LI: Vehicle licence, field 24
Country Model Type approval*
DE/AT Audi RS Q3 (8U) e1*2007/46*0590*..
DE/AT Audi RS Q3 Performance (8U) e1*2007/46*0590*..
DE/AT Audi RS3 (8P/8PA) e1*2007/46*0615*..
DE/AT Audi RS3 (8V) from e1*xx/xx*0608*06
DE/AT Audi RS3 (8V) from e1*xx/xx*0608*08
DE/AT Audi RS3 (8V) e1*2007/46*0608*..
DE/AT Audi RS3 (8V) e1*2007/46*0608*08
DE/AT Audi RSQ3 (F3) e13*xx/xx*2038*..
DE/AT Audi TTRS (8J) e1*2007/46*1686*..
DE/AT Audi TTRS (8J) e1*xx/xx*1686*..
DE/AT Audi TTRS (8J1) e1*KS07/46*0054*..
DE/AT Audi TTRS Plus (8J) e1*2007/46*1686*..
CH/LI Audi RS3 8V 1AF394-1AF399
CH/LI Audi RS3 8V 1AF401-1AF402

Compatible vehicles:

Vehicle
Type
Power
Engine capacityEngine type
Audi A3 (8V)
RS3 quattro
270kW / 367hp2480cm³
CZGB

Please enter a valid email address.
Please enter a valid question.
Fields marked with * are mandatory.

There aren't any asked questions yet.
Zuletzt gesehene Produkte

Zuletzt gesehene Produkte

Competition water cooler kit | fits Audi RS6/RS7 (C7/4G) | Wagner Tuning
The competition water cooler kit is suitable for the following models:Audi RS6 C7 412KW/560hp 2013-2018Audi RS6 C7 Performance 445KW/605hp 2015-2018Audi RS7 C7 412KW/560hp 2013-2017Audi RS7 C7 Performance 445KW/605hp 2015-2017 Optimise the cooling performance of your Audi RS6 / RS7 C7 with our competition water cooler kit. The 4.0L V8 bi-turbo engine of the Audi RS6 and RS7 models is equipped with an indirect charge air cooling circuit. The charge air cooling process is therefore not realised with ambient air as usual, but with a separate cooling water circuit. A reduction in the cooling water temperature leads directly to an improved cooling performance of the charge air. This is where the advantages of our Wagner Tuning auxiliary water cooler come into play. Our newly developed competition racing mesh increases the radiator volume of the standard water cooler by an impressive 102%. The ratio between the inner and outer cooling surface ensures maximum heat transfer and at the same time allows sufficient airflow for neighbouring components such as the engine water cooler. The water coolers are also equipped with a thermally conductive anti-corrosion coating, which ensures a long-term cooling effect. Installation of the system is straightforward and plug-and-play thanks to our installation instructions. Prepare your Audi RS6 / RS7 C7 for maximum performance and optimise its cooling system with our competition water cooler kit. Attention: Not authorised in the area of the StVZO.

€1,390.00*
Stabilizer front + rear axle set | fits BMW M1 (E82) / M3 (E90/E92/E93) | 33039-1 | incl. approval | H&R
Made from high-strength spring steel, most H&R anti-roll bars can be adjusted on the front and rear axle. Precision-forged ends and the use of bearings made from a special composite material guarantee precise wheel guidance and reduce the vehicle's tendency to roll. Can be combined with all commercially available standard or sports suspensions. Brief description: - Installation location front axle: Ø 27 mm, not adjustable - Installation location rear axle: Ø 23 mm - with parts certificate - Please note the information! - Illustration may differ from the original The product benefits at a glance: - Reduced rolling tendency of the vehicle - Better handling due to reduced body roll - Partially multi-adjustable - Minimal loss of comfort - Under- or oversteer are reduced or changed - Can be installed with standard or sports suspension - High-strength special spring steel - Bearings made from special composite material - In-house development and production in Germany - With parts certificate Note 55: When installing the H&R stabilisers, the standard add-on parts must also be used, unless otherwise supplied by H&R. It must be ensured that the original parts to be used are in perfect condition; if necessary, these parts must be replaced. Note 60: With this stabiliser bar set, the VA stabiliser bar can also be installed separately (without the HA stabiliser bar) and is TÜV-approved. However, if only the front stabiliser bar is installed separately, the vehicle may tend to understeer. Usage numbers: 33039-1, 330391 Compatible vehicles: - BMW 1 Series Coupe (E82) M (250 kW, 340 hp) - BMW 3 Series (E90) M3 (309 kW, 420 hp) - BMW 3 Series Convertible (E93) M3 (309 kW, 420 hp) - BMW 3 Series Coupe (E92) M3 (309 kW, 420 hp)

€630.00*