H&R | Coilover springs 25-35/30-45mm | BMW M3/M4 Competition xDrive (G80/G82) | 23026-2

The Air Intake Set for the G8X models made of carbon fiber gives your vehicle an upscale look. When you buy pre-preg carbon fiber, you are investing in a higher quality and more durable material that will outlast other forms of carbon fiber and potentially save you money in the long run. Scope of delivery:- 1x Air Intake Set Details:- 100% carbon fiber construction- High gloss finish- Fit guarantee Compatible vehicles with S58 engine:- BMW G80 M3 (all models)- BMW G81 M3 (all models)- BMW G82 M4 (all models)- BMW G83 M4 (all models)Note: This is NOT an original BMW product!

The carbon replacement air intakes Twin Fin for the G8x were developed to match the channel lines of the SP1 G8X front splitter. With both the SP1 and Twin Fin ducts installed, you get the aggressive angles your front end needs.Our covers are a direct replacement, which means you can finally remove the honeycomb grille that is currently in front of the air ducts.These covers are made of pure pre-preg carbon, so the bumper adds minimal weight while providing the aggressive look you've been wanting. Details:- 100% pure pre-preg carbon fiber construction- OEM style fabric- High gloss finish- Fit guarantee- Mounts to the OEM front bumper using the original grille clip positions- with parts certificate according to §19.3 Compatible vehicles:- BMW G80 M3/Competition/CS Sedan (2021+)- BMW G81 M3 Competition Touring (2021+)- BMW G82 M4/Competition/CSL Coupe (2021+)- BMW G83 M4 Competition Convertible (2021+)Note: This is NOT an original BMW product!

Suitable for the following models: BMW 4 Series (G22) Coupe M4 (G82) XWINX - The aerodynamic wing for the BMW 4 Series (G22) and M4 (G82) is four-way adjustable to adapt to different routes. Changing the position takes less than 5 seconds and requires no tools. Objective: Stabilises cornering at high speeds. - Very good visibility through the interior rear-view mirror in any position - best downforce values of all approved wings on the market - four-way adjustable: - down = same downforce as standard - up 1 = 35% more downforce - up 2 = 65% more downforce - up 3 = 105% more downforce (for comparison: the CSL duck tail provides 20% more downforce) - Position 'down' for daily-driving - with ABE

Facts: - 2x 3” (76mm), replaces the main catalytic converter - with 200 cell stainless steel sports catalytic converter - Euro 6 compatible - for current OPF models - with Thermo-Integral insulation (for an extra charge) - with ECE approval* Compatible vehicles:VehicleVehicle typePower outputEngine capacityEngineYear of constructionBMW 2 Series (G87)M2338kW / 460PS2993cm³S58 B30 A11.22 -BMW 3 Series (G80)M3353kW / 480PS2993cm³S58 B30 B11.20 -BMW 3 Series (G80/G81)M3 Competition / xDrive375kW / 510PS2993cm³S58 B30 A05.21 -BMW 4 Series (G82)M4353kW / 480PS2993cm³S58 B30 B11.20 -BMW 4 Series (G82/G83)M4 Competition / xDrive375kW / 510PS2993cm³S58 B30 A05.21 - Note: Depending on the software version, the engine control light may light up. We recommend the purchase of an OFF set module or software customisation. *This downpipe has ECE approval so that it can be used within the scope of the German Road Traffic Licensing Regulations (StVZO) without registration in the vehicle documents.

Facts: - Tailpipes: 4x100mm black - 3.0 inch stainless steel - MSD removal - Mounting for the original electric flap actuator - Made in Germany (Lake Constance) - with ECE approval* Scope of delivery: - 1x Aulitzky Exhaust exhaust system from OPF - 4x tailpipes 100mm black - ECE handout Compatible vehicles:VehicleVehicle typePower outputEngine capacityEngineYear of constructionBMW 3 Series (G80)M3353kW / 480hp2993ccS58 B30 B11.20 -BMW 3 Series (G80/G81)M3 Competition / xDrive375kW / 510hp390kW / 530hp2993ccS58 B30 A05.21 -07.24 -BMW 4 Series (G82)M4353kW / 480hp2993ccS58 B30 B11.20 -BMW 4 Series (G82/G83)M4 Competition / M xDrive375kW / 510hp390kW / 530hp2993cm³S58 B30 A05.21 -07.24 - *The ECE and the combination certificate for the pre-facelift and facelift models are available (includes intake, intercooler, boost pipe kit, downpipe, exhaust system, 670hp Aulitzky App performance increase and 107dB increase in stationary noise). In conjunction with the standard flap control system (with type approval), this flap exhaust system has ECE approval, meaning that it can be used legally within the scope of the German Road Traffic Licensing Regulations (StVZO) without registration in the vehicle documents.

Funktion: - variable Klappensteuerung der originalen oder nachgerüsteten Klappenabgasanlage - über Lenkradtasten steuerbarEs ist möglich, dass das Fahrzeug bei dauerhaft manuell geöffneten Abgasklappen den fehlenden Abgasgegendruck bemängelt und in den Notlauf geht. Dieser Fehler kann durch den optionalen G80 OPF-Deleter behoben werden. Kompatible Fahrzeuge:FahrzeugTypLeistungHubraumMotorBaujahrBMW 3er (G80)M3353kW / 480PS2993cm³S58 B30 B11.20 -BMW 3er (G80/G81)M3 Competition / xDrive375kW / 510PS2993cm³S58 B30 A05.21 -BMW 4er (G82)M4353kW / 480PS2993cm³S58 B30 B11.20 -BMW 4er (G82/G83)M4 Competition / M xDrive375kW / 510PS2993cm³S58 B30 A05.21 - Hinweis: Dieses Produkt ist NICHT in der StVZO zugelassen und NICHT für den Verkauf innerhalb der EU gedacht! Dieser Artikel dient ausschließlich für Show- & Motorsportzwecke und darf nicht im öffentlichen Straßenverkehr genutzt/verbaut werden. Sollte das Bauteil am/im Fahrzeug verbaut sein, erlischt die Betriebserlaubnis! Bei den abgebildeten Bildern handelt es sich um Beispielbilder.

Transform your BMW M G8X into a high-performance powerhouse with the BlackBoost cooling air intake system. Experience more power, style and driving dynamics with this premium upgrade. In the world of performance modifications, the airbox is one of the most important engine components you should upgrade. The factory airbox is very restrictive in terms of airflow and filter area. Our cooling air intakes are designed and engineered to overcome these factory restrictions and deliver the maximum airflow with the lowest possible temperatures given the space available. The BlackBoost Cold Air Intakes are designed to be flush with the bonnet of the vehicle and ensure a consistent seal with the rubber seals of the airbox, whilst also ensuring a large surface area to work properly. The BlackBoost twin-flow filters are specifically designed to maximise airflow and surface area. The BlackBoost intake kit is a plug-and-play solution that works perfectly without further customisation and requires no additional software tuning. It also works smoothly in combination with turbo upgrades, downpipes, methanol injections etc. to unleash the necessary airflow and utilise the full capacity of the engine for those aiming for 1000+ WHP figures. Scope of delivery:- Powder coated airbox- Filters- BlackBoost CFD developed filter adapter- Personalised logo plate Key Features:- Proven power increase from 8 to 30+ hp on production vehicles- Improved responsiveness across the entire rev range- Optimised airflow and increased volume range compared to standard equipment- Increased surface area of the filter elements- Can support airflow for 1000+ WHP configurations- Larger filter element surface area compared to OEM- Plug-and-play bolt-on installation- No ECU tuning required Compatible vehicles (Attention: approved for pre-facelift models only!):BMW M2 (G87) 338kW | 460PS | 2993cm³ | S58BMW M2 (G87) 353kW | 480PS | 2993cm³ | S58BMW M3 (G80) 353kW | 480PS | 2993cm³ | S58BMW M3 (G80) Competition 375kW | 510PS | 2993cm³ | S58BMW M3 (G80) Competition 375kW | 510PS | 2993cm³ | S58 | xDriveBMW M3 (G80) Competition 390kW | 530PS | 2993cm³ | S58 | xDriveBMW M3 (G80) CS 405kW | 551PS | 2993cm³ | S58 | xDriveBMW M3 (G81) Competition 375kW | 510PS | 2993cm³ | S58 | xDriveBMW M3 (G81) Competition 390kW | 530PS | 2993cm³ | S58 | xDriveBMW M4 (G82) | 353kW | 480PS | 2993cm³ | S58BMW M4 (G82) Competition | 375kW | 510PS | 2993cm³ | S58BMW M4 (G82) Competition M | 375kW | 510PS | 2993cm³ | S58 | xDriveBMW M4 (G82) CSL | 405kW | 551PS | 2993cm³ | S58 | xDriveBMW M4 (G82) CSL | 412kW | 560PS | 2993cm³ | S58 | xDriveBMW M4 (G83) Competition M | 375kW | 510PS | 2993cm³ | S58 | xDrive

Here we present our display for the BMW M2 M3 M4 G-series. Access to all data from the engine control unit:So ALL. The sensors are queried directly via Can Bus and are displayed on our tried and tested MFD32. The display for the BMW G-series comes with a vehicle-specific panel and fits into the interior like an original part. The sensors are queried via the manufacturer-specific Can Bus protocol. We have optimised the protocol to achieve maximum polling speed. Details:- Integrates perfectly into the vehicle interior- Up to 128 sensors can be interrogated- 10 individually configurable views with our DSS - Display Setup Software- ready-made views for a quick start with our display- simply plug and play via our cable set - plug in, done- 4 additional analogue inputs for exhaust gas temperature, oil pressure and more- Ethanol sensor connection directly to the display- Best readability - optional anti-reflective film included- Query the sensors like manufacturer diagnostic tools Performance metre:Measure your acceleration times in our performance widget - 0-100, 100-200, 0-200 Data jogging:Log all data to the internal SD card. Whether "on-demand" (start with a tap) or permanently. All data from your last turn is saved. Preset alarms:Preset alerts can be easily activated and customised. For example, receive a large warning message if the exhaust gas temperature is above 900 degrees. 4 additional analogue inputs:Additional temperature and/or pressure sensors can be connected for further monitoring options, e.g. exhaust gas temperature or exhaust gas back pressure. An ethanol sensor can be connected to one of the digital inputs. Read out/delete errors:Read out errors from the engine control unit in plain text and also delete them Customised designWhether it's the customised start screen or the selection from a variety of different widgets. Make the display your display! Access to all data from the engine control unit:We supply your display with a ready-made TRI file as standard. All sensors that are queried are defined here. Temperatures:Engine water temperature, intake temperature, exhaust temperature, transmission temperature Pressures:Boost pressure, ambient pressure, oil pressure Lambda/mixture:Lambda value target/actual, short-term lambda adjustment, long-term lambda adjustment, MAF, engine load, torque Driver dynamics:Brake pressure, vehicle speed, throttle angle/gas pedal position Other:Engine speed, total ignition angle, gear, battery voltage, ignition angle reduction per cylinder Analogue inputs:Additional sensors can be added here: Oil temperature, petrol pressure, oil pressure, exhaust gas temperature, etc. but also an ethanol sensor (Flex Fuel) If values are missing, they can easily be added. ATTENTION: not every engine offers all values! For which engines and models is the BMW G-series display:The display bezel fits all BMW G-series (G80/G81/G83/G87) left-hand drive (LHD) vehicles that have the ID7 display installed. The pre-assembled bezel does not fit vehicles with the ID8 monitor! A version for right-hand drive vehicles (RHD) is also available. We currently support the following engines, unlisted engines can be added on request:- B48, B57, B58, M54, M57, N13, N20, N47, N52, N54, N55, N57, S55, S58, S63 MFD32 Technical data:- Dimensions: 89 x 60mm - Hardware: 3.2" TFT screen, touchscreen, MicroSD, MicroUSB- Symmetrical display - ideal for rotating it by 90- Views can be freely configured directly on the display or with our DSS - Display Setup Software on the PC- Up to 64 widgets per display- 64 sensors (Can Bus + internal)- 10 views- 4x analogue inputs- 2x speed input- Optional external switching flash- Can bus switching Supported values:Many customers always ask: "Which values can I query from my control unit? The answer: "ALL". Our MFD32 is compatible with ISO 11898-2 and SAE J2284.The control unit manufacturers themselves determine which values are sent via the CAN bus interface. The documentation is important here - possibly even in the form of a DBC file that can be imported directly. You can also access our extensive list of already implemented control units. This can be found in the download area. A total of up to 50 sensors can be queried if the manufacturer supports this.Broadcast data as well as OBD2 queries via Can Bus (11bit/29bit) are implemented. Special protocols such as TP2.0 from VW/Audi and UDS are also available. DSS - Display Setup Software:With our DSS - Display Setup Software, the display can be conveniently configured on the PC. The Can Bus protocol can be customised, you can import DBC files and design the displays with your own widgets.The log viewer downloads log files from the display. These can then be viewed and values can be individually selected and scaled.An in-built Can Bus logger allows you to take a close look at the log. This can be used to reverse-engineer unknown Can Buses.

Upgrade your G20/G80 with these carbon fibre doors that enhance both style and performance. Details:- Carbon fibre doors, made from high-quality prepreg carbon fibre- Guaranteed accuracy of fit, 1:1 from the original- Largely reduced weight, the weight of the carbon fibre doors is less than 1/2 of the original doors.- Price is for 4 doors - front and rear Features:- Lightweight design: made from high quality carbon fibre, these doors are significantly lighter than the stock doors and reduce the overall weight of the vehicle for improved agility and acceleration.- Superior strength: Carbon fibre offers exceptional strength and rigidity, ensuring high durability and resilience while maintaining a slim profile.- Premium finish: The doors feature a high-gloss carbon fibre weave that gives your G20/G80 a refined, race-inspired look and complements its sporty design.- Exact fit: Designed specifically for the G20/G80, these doors offer a precise fit and seamless integration that meets OEM standards for alignment and function.- Improved performance: By reducing weight, these doors contribute to better handling, braking behaviour and improved driving dynamics.- Professional installation recommended: For best results, professional installation is recommended to ensure proper alignment and functionality with your vehicle's systems. Care instructions:Regular cleaning: Maintain carbon fibre parts by cleaning them regularly with a soft cloth and a mixture of mild soap and water. Avoid abrasive cleaners or harsh detergents that could damage the surface.Use microfibre pads and cloths: Use microfibre pads and cloths when cleaning or applying protective coatings to avoid scratching the surface.Protect the product from the sun and chemicals: Avoid direct sunlight and harsh chemicals, as these can damage the carbon fibre. If possible, use protective covers or park your vehicle in shaded areas. Installation:Although the installation of this product is relatively simple for the skilled do-it-yourselfer, we still recommend installation by a professional mechanic.No special tools are required to install this product. Scope of delivery:- 4 carbon fibre doors (2x front doors per FS/BFS, 2x rear doors per FS/BFS)- Required mounting parts Compatible vehicles:All G20/G80 modelsNote: This is NOT an original BMW product!

The side centre consoles give your vehicle an upscale look and feel. When you buy Pre-Preg carbon fibre, you are investing in a higher quality and more durable material that will outlast other forms of carbon fibre and potentially save you money in the long run. Details:- 100% carbon fibre construction- High gloss finish- Fit guarantee- registration free Scope of delivery:1x set of centre console side covers (1x right / 1x left) Compatible vehicles:- BMW G87 M2 - BMW G80 M3 incl. Competition Saloon (2021+)- BMW G81 M3 incl. Competition Touring (2023+)- BMW G82 M4 incl. Competition Coupé (2021+)- BMW G83 M4 incl. Competition Convertible (2021+) Note: This is NOT an original BMW product!

The daytime running lights bring a touch of the racetrack to the front bumper of your vehicle.The price is without installation.These are the complete modules including heat sink. No complex conversion is necessary for installation, the modules can simply be plugged in (Plug&Play). Not approved in the STVZO area. Only suitable for use in motorsport. Compatible vehicles:VehicleTypePowerEngine capacityEngine typeYear of constructionBMW 3 Series (G80)M3353kW / 480hp2993cm³S58 B30 B11.20 -BMW 3 Series (G80/G81)M3 Competition / xDrive375kW / 510hp2993cm³S58 B30 A05.21 -BMW 4 Series (G82)M4353kW / 480hp2993cm³S58 B30 B11.20 -BMW 4 Series (G82/G83)M4 Competition / xDrive375kW / 510hp2993cm³S58 B30 A05.21 -BMW 4 Series (G22/G23)4 Seriesallallall01.21 - Note: This is NOT an original BMW product!

The ECU battery cover made of pre-impregnated carbon fibre gives your engine compartment a classy touch.By replacing the standard black plastic cover, you can give your vehicle a personalised touch. When you buy Pre-Preg carbon fibre, you are investing in a higher quality and more durable material that will outlast other forms of carbon fibre and potentially save you money in the long run. Installation: Plug&Play Details:- 100% carbon fibre construction- High gloss finish- registration free Compatible vehicles:- BMW G87 M2 models- BMW G80 M3 Sedan models- BMW G81 M3 Touring models- BMW G82 M4 Coupé models- BMW G83 M4 Convertible models Note: This is NOT an original BMW product!

Eibach Pro-Kit performance suspension springs for front and rear axle E10-20-049-06-22 The Eibach Pro-Kit lowering springs are the ideal solution for your vehicle, as the kit lowers the centre of gravity, reduces rebound when accelerating, reduces body roll when cornering and dips when braking. As a result, understeer and oversteer no longer occur. Lowering the vehicle with the Pro-Kit springs reduces the standard distance between the tyres and the wheel arch and gives the vehicle a sporty look. In addition, the handling of the vehicle is maximised. The Eibach Pro-Kits are designed by Eibach suspension engineers and test experts to deliver a combination of sporty looks and performance without compromising on safety or ride quality. - Developed and tested for combination with standard and aftermarket dampers- Component of the Eibach Pro system- Top performance handling- Lowers the vehicle's centre of gravity by up to 40 mm (depending on the vehicle)- Spring design for traction and attraction- Progressive suspension characteristics- Performance handling- ABE or parts certificate Note: Only for vehicles without levelling control. Information:- Lowering front axle: approx. 20mm- Lowering rear axle: approx. 5-10mm- Type of approval: with expert opinion- Suspension: for all standard damping systems- Illustration may differ from the original Compatible vehicles:- Axle load front axle: up to 1165kg- Axle load rear axle: up to 1205kg- EC type approval number: e1*2018/858*00003*..- Only for vehicles without levelling control BMW 3 (G80) M3 480 HP / 353 KW 7909-ACUBMW 3 (G80) M3 Competition 510 hp / 375 KW 7909-ACVBMW 3 (G80) M3 Competition xDrive 510 hp / 375 KW 7909-ACZ

Eibach Pro-Kit performance suspension springs for front and rear axle E10-20-049-01-22 The Eibach Pro-Kit lowering springs are the ideal solution for your vehicle, as the kit lowers the centre of gravity, reduces rebound when accelerating, reduces body roll when cornering and dips when braking. As a result, understeer and oversteer no longer occur. Lowering the vehicle with the Pro-Kit springs reduces the standard distance between the tyres and the wheel arch and gives the vehicle a sporty look. In addition, the handling of the vehicle is maximised. The Eibach Pro-Kits are designed by Eibach suspension engineers and test experts to deliver a combination of sporty looks and performance without compromising on safety or ride quality. - Developed and tested for combination with standard and aftermarket dampers- Component of the Eibach Pro system- Top performance handling- Lowers the vehicle's centre of gravity by up to 40 mm (depending on the vehicle)- Spring design for traction and attraction- Progressive suspension characteristics- Performance handling- ABE or parts certificate Note: Only for vehicles without levelling control. Information:- Lowering front axle: approx. 20mm- Lowering rear axle: approx. 20mm- Type of approval: with expert opinion- Suspension: for all standard damping systems- Illustration may differ from the original Compatible vehicles:- Axle load front axle: up to 1165kg- Axle load rear axle: up to 1270kg- EC type approval number: e1*2018/858*00003..- Only for vehicles without levelling system BMW 4 (G82) M4 353kW / 480PS 7909-ACWBMW 4 (G82) M4 Competition 375kW / 510hp 7909-ACXBMW 4 (G82) M4 Competition M 375kW / 510hp 7909-ADABMW 4 (G83) M4 Competition M 375kW | 510hp 7909-ADB

Our high-quality engine cover made from pre-preg carbon fibre is a great addition to enhance the style of your vehicle. The carbon fibre engine cover replaces the standard plastic part. When you buy Pre-Preg carbon fibre, you are investing in a higher quality and more durable material that will outlast other forms of carbon fibre and potentially save you money in the long run. Installation: Plug&Play Details:- 100% carbon fibre construction- High gloss finish- Performance style design- Supplied with 3M double-sided adhesive tape already attached- Use rubber adapter from the original engine cover + emblem- registration free Compatible vehicles with S58 engine:- BMW G87 M2 - BMW G80 M3 Sedan (2021+)- BMW G80 M3 Competition Sedan (2021+)- BMW G81 M3 Touring (2023+)- BMW G81 M3 Competition Touring (2023+)- BMW G82 M4 Coupé (2021+)- BMW G82 M4 Competition Coupé (2021+)- BMW G83 M4 Convertible (2021+)- BMW G83 M4 Competition Convertible (2021+) Note: This is NOT an original BMW product!

Our high-quality and large engine cover made of pre-preg carbon fibre is a great addition to enhance the style of your vehicle. The carbon fibre engine cover replaces the standard plastic part. When you buy Pre-Preg carbon fibre, you are investing in a higher quality and more durable material that will outlast other forms of carbon fibre and potentially save you money in the long run. Installation: Plug&Play Details:- 100% carbon fibre construction- High gloss finish- Performance style design- Supplied with 3M double-sided adhesive tape already attached- Use rubber adapter from the original engine cover + emblem- registration free Compatible vehicles with S58 engine:- BMW G87 M2 - BMW G80 M3 Sedan (2021+)- BMW G80 M3 Competition Sedan (2021+)- BMW G81 M3 Touring (2023+)- BMW G81 M3 Competition Touring (2023+)- BMW G82 M4 Coupé (2021+)- BMW G82 M4 Competition Coupé (2021+)- BMW G83 M4 Convertible (2021+)- BMW G83 M4 Competition Convertible (2021+) Note: This is NOT an original BMW product!

Facts: Material: Carbon glossy Manufacturer: Eventuri The BMW M3/M4 is one of Munich's flagship cars and deserves an engine bay that looks as good as it performs. Since the OEM cover makes the engine bay look unfinished, we redesigned it to achieve much-needed symmetry and give the engine a more complete aesthetic. Our cover extends over the intercooler and still allows for adequate heat dissipation through additional venting. Made from prepreg carbon fibre, our engine cover is a direct replacement using the OEM brackets. Compatible vehicles:VehicleTypePowerEngine capacityEngine typeYear of constructionBMW 3 Series (G80)M3353kW / 480hp2993cm³S58 B30 B11.20 -BMW 3 Series (G80/G81)M3 Competition / xDrive375kW / 510hp2993cm³S58 B30 A05.21 -BMW 4 Series (G82)M4353kW / 480hp2993cm³S58 B30 B11.20 -BMW 4 Series (G82/G83)M4 Competition / xDrive375kW / 510hp2993cm³S58 B30 A05.21 -

Facts:Performance increase: 13-18hp, 12-16ft-lb (stock tune)Turbo inlet area increased by up to 160%Filtration area increased by up to 40%Material: CarbonManufacturer: EventuriParts certificate: A certificate is available for this product for certain regions and vehicles (details below) Introducing an intake that truly sets a new benchmark for the BMW G8X M3/M4 platform. We have undertaken intensive research and development to create an intake system that not only outperforms the standard M3/M4, but is also future proofed for power increases well in excess of 1000hp. Our system is a complete redesign from the airboxes to the turbo inlets with the aim of reducing pressure loss while increasing flow rate and keeping inlet temperatures low. We have maximized the use of available space and used 2 custom made filters with a 40% larger filter area than stock. These are used in our patented Venturi housings to direct the air evenly to the turbo inlets. The inlets themselves have a cross section up to 160% larger than standard and are fitted with an advanced dimpled inner surface to reduce frictional losses between the flow and the wall boundary. By creating an air "cushion" on the wall surface, the airflow can move through the inlets at higher flow rates and lower pressure drop. This allows the turbos to draw in air with less resistance, reducing the wastegate duty cycle, resulting in higher overall performance. Bench testThis intake system was independently bench tested by BR Performance in Belgium. The tests were carried out back-to-back with the standard airbox and several runs were made with each configuration. The tested vehicle was driven without an activated carbon filter. We compared the best results with the standard airbox and the best results with the Eventuri system. The results on the dyno show a constant increase across the entire rev range, which is due to the turbos reaching maximum boost pressure earlier and having a lower wastegate duty cycle due to the higher efficiency of the intake system. This increase is despite the increase in dyno temperatures from 11.8 degrees Celsius in the tests with the standard system to almost 16 degrees Celsius in the Eventuri tests. The increase in performance is reflected on the road in improved response at part and full throttle, with the car pulling much more eagerly to the red line. Intake air temperature testsIn vehicles with turbochargers, a lot of heat can build up in the engine compartment, which can have a detrimental effect on performance if the intake system is not sealed against this heat. Even with intercoolers and charge air coolers, it is important to minimize intake air temperatures as these cooling devices operate at a certain efficiency, so the output air temperature is affected by the input air temperature. Restricting the intake tract with open cones, even if they are heat protected, will inevitably draw hot air from the engine bay. Our system, which is completely sealed, solves this problem, while still not restricting the flow path by using larger volumes. To demonstrate this, we recorded the air temperatures with thermocouples immediately before each turbo. The comparisons were made on the same day and under the same environmental conditions between the original and Eventuri. Our M3 was allowed to warm up and then accelerated from 30mph to 90mph in 6th gear to measure the temperature change on each run. The car was accelerated in 6th gear to measure the temperature change with each run. At 90mph, the gas pedal was released and the brakes applied to 30mph, after which the car was accelerated back to 90mph. A total of 3 pull-throughs were performed with both intake configurations. Scope of delivery:- 2x patented Venturi filter housings made of carbon- 2x Bespoke dry cone filters with high flow rate- 2x carbon intake pipes- 1x carbon intake pipe- 2 thermoplastic turbo inlets- Laser-cut stainless steel brackets- Customized flexible hose- CNC machined brackets and reinforcement rings For this product a certificate is available for the following regions and vehicles:* DE/AT: Vehicle registration document, field K --- CH/LI: Vehicle registration document, field 24Country model type approval*DE/AT BMW M2 e1*2018/858*00211*..DE/AT BMW M3 e1*2018/858*00003*..DE/AT BMW M3 Competition e1*2018/858*00003*..DE/AT BMW M3 Competition M xDrive e1*2018/858*00003*..DE/AT BMW M3 CS e1*KS18/858*00008*..DE/AT BMW M4 e1*2018/858*00003*..DE/AT BMW M4 Competition e1*2018/858*00003*..DE/AT BMW M4 Competition M xDrive e1*2018/858*00003*..DE/AT BMW M4 CSL e1*KS18/858*00008*..CH/LI BMW G234M WBS31AYCH/LI BMW G234M WBS31AZCH/LI BMW G234M WBS31BACH/LI BMW G234M WBS41AYCH/LI BMW G234M WBS41AZCH/LI BMW G234M WBS51AYCH/LI BMW G234M WBS51AZCH/LI BMW G34MKS WBS61AYCH/LI BMW G34MKS WBS61AZCH/LI BMW G34MKS WBS81AZCH/LI BMW M2 WBS11DMCH/LI BMW M3 / G234M WBS11GB Compatible vehicles:VehicleVehicle typePowerEngine capacityEngine typeYear of construction BMW 3er (G80)M3353kW / 480hp2993cm³S58 B30 B11.20 -BMW 3er (G80/G81)M3 Competition / xDrive375kW / 510hp2993cm³S58 B30 A05.21 -BMW 4er (G82)M4353kW / 480hp2993cm³S58 B30 B11.20 -BMW 4er (G82/G83)M4 Competition / M xDrive375kW / 510hp2993cm³S58 B30 A05.21 -

Made from Aircraft Grade T-6061 Aluminum, the Evolve Gear Shift Paddle Set puts you back in control of your M Performance vehicle, more feel and ease of use make the Evolve Gear Shift Paddle Set the superior choice over OEM paddles. Designed specifically for the BMW M Performance steering wheel, the sleek Evolve Paddle Set follows the curves and lines of the steering wheel. Available in two finishes to complement the interior of your BMW, you have the choice between Titanium and Dark Anthracite. We designed these paddle shifters with the racetrack in mind, so you can easily engage gears regardless of steering angle.In addition, the OEM control unit is retained and the entire paddle is replaced, this is not a stick-on version. Fits all F-Series & G-Series vehicles with the latest Gen.3 M Performance steering wheel:G87 M2G80 | G81 M3G82 | G83 M4F90 M5F91 | F92 M8F97 X3MF98 X4MG01 X3G02 X4G05 X5G06 X6G07 X7G30 5 Series

Enhance the aesthetics of the front of your G8X with this carbon fibre front grille. Made from state-of-the-art pre-preg carbon fibre, this grille enhances the aggressive character of the G8X, making your vehicle stand out both on the road and on social media.The road presence this grille offers is unrivalled. You will be amazed by the transformation.The original logo is not included. You can continue to use your old emblem or purchase a new one separately. Details:- 100% pure pre-preg carbon fibre construction- OEM-style fabric- High-gloss surface- Fit guarantee- Fits the OEM grille clip positions- With parts certificate according to §19.3 Compatible vehicles:- BMW G80 M3/Competition Sedan (2021+)- BMW G81 M3 Competition Touring (2021+)- BMW G82 M4/Competition Coupe (2021+)- BMW G83 M4 Competition Convertible (2021+)Note: This is NOT an original BMW product!

The carbon front lip in DK style for G8X models provides that certain something and impresses with its sporty look.Parts certificate in preparation Compatible vehicles:BMW 3 (G80) M3 BMW 3 (G80) M3 Competiton BMW 3 (G80) M3 CS BMW 3 Touring (G81) M3 CompetitonBMW 4 (G82) M4 BMW 4 (G82) M4 Competiton BMW 4 (G82) M4 CSL BMW 4 Convertible (G83) M4 Competiton MNote: This is NOT an original BMW product!

To increase strength and durability, prepreg carbon fibre is reinforced in contrast to normal carbon fibre and can still be 70% lighter than other carbon options.A decisive advantage in terms of weight saving. Prepreg carbon fibre is far more consistent in quality, so the likelihood of imperfections is greatly reduced. The manufacturing process eliminates unwanted air bubbles and results in a perfectly smooth and high-gloss finish. Key features:- 100% pure prepreg carbon fibre- OEM style weave- High gloss finish- Fitment guarantee- 1 year warranty- Registration according to §21 possible Scope of delivery:1x TNF+ front splitter in prepreg carbon fibre Compatible vehicles:BMW G80 M3 Sedan (2021+)BMW G80 M3 Competition Saloon (2021+)BMW G81 M3 Touring (2023+)BMW G81 M3 Competition Touring (2023+)BMW G82 M4 Coupe (2021+)BMW G82 M4 Competition Coupe (2021+)BMW G83 M4 Convertible (2021+)BMW G83 M4 Competition Convertible (2021+) Note: This is NOT an original BMW product!

The gear knob cover gives your vehicle an upscale look and a pleasant feel. When you buy Pre-Preg carbon fibre, you are investing in a higher quality and more durable material that will outlast other forms of carbon fibre and potentially save you money in the long run.Details:- 100% carbon fibre construction- High gloss finish- Fit guarantee- registration free Compatible vehicles:- BMW G87 M2 - BMW G80 M3 incl. Competition Saloon (2021+)- BMW G81 M3 incl. Competition Touring (2023+)- BMW G82 M4 incl. Competition Coupé (2021+)- BMW G83 M4 incl. Competition Convertible (2021+) Note: This is NOT an original BMW product!

Immerse yourself in the world of carbon fiber with our stylish radiator grille upgrade for the G80/81/82/83. Made from high-quality TNF+ Dry Carbon, it gives your vehicle a touch of luxury and racing style. Installation is child's play - even when mounted. Simply remove the adhesive strips and insert the cover into the side of the grille - and your boring plastic or polystyrene cover is history! Why should you choose prepreg carbon fiber? Unlike conventional carbon fiber, prepreg carbon fiber is equipped with additional reinforcement that maximizes strength and durability. It is up to 70% lighter than other carbon options, which not only improves performance but also reduces the weight of your vehicle. Our carbon products have a flawless surface finish. Thanks to the manufacturing process without unwanted air bubbles, you get a perfectly smooth and shiny finish that enhances your vehicle and gives it the finishing touch. Treat yourself to the upgrade! Replace your ordinary plastic shell with a classy carbon shell and make your vehicle an eye-catcher on the road. - Made from high-quality prepreg carbon fiber- High-gloss finish for the ultimate shine Scope of delivery:A high-quality full carbon cover (dry carbon in OEM fabric) that gives your vehicle that certain kick. Treat yourself to the difference today! Details:- 100% carbon construction- High-gloss finish- Fit guarantee- registration free Compatible vehicles:- BMW G80 M3 (all models)- BMW G81 M3 (all models)- BMW G82 M4 (all models)- BMW G83 M4 (all models)Note: This is NOT an original BMW product!