Free shipping
info@aulitzkytuning.de
+49 (0)9874 6891630

Data display 2.8” MFD28 Gen.2 | fits Toyota GT86 / Subaru BRZ | CANchecked

€548.99*

Delivery time: approx. 3-7 working days*

Steering wheel position
Product number: CC37020
Product information "Data display 2.8” MFD28 Gen.2 | fits Toyota GT86 / Subaru BRZ | CANchecked"

Here we present our display for the Toyota GT86 (2012-) and Subaru BRZ (2012-2015).

Access to all data from the engine control unit. So ALL. The sensors are queried directly via Can Bus and are displayed on our proven MFD28. The Toyota GT86 / Subaru BRZ display comes with a vehicle-specific cover and fits into the interior like an original part. The ventilation remains intact through the slots.

The sensors are queried via OBD2 and directly from the Can Bus. We have optimized the protocol to achieve maximum polling speed.

Details:
- integrates perfectly into the vehicle interior
- Up to 128 sensors can be queried
- 10 individually configurable views with our DSS - Display Setup Software
- ready-made views for a quick start with our display
- simply plug and play via our cable set - plug in, done
- 4 additional analog inputs for exhaust gas temperature, oil pressure and more
- Best readability - optional anti-reflective film included
- Query the sensors like manufacturer diagnostic tools

Performance meter:
Measure your acceleration times in our performance widget - 0-100, 100-200, 0-200

Data jogging:
Log all data to the internal SD card. Whether "on-demand" (start with a tap) or permanently. All data from your last turn is saved.

Preset alarms:
Preset alarms can be easily activated and customized. For example, receive a large warning message if the exhaust gas temperature is above 900 degrees.

4 additional analog inputs:
Additional temperature and/or pressure sensors can be connected for further monitoring options, e.g. exhaust gas temperature or exhaust gas back pressure. An ethanol sensor can be connected to one of the digital inputs.

Read out/delete errors:
Read out errors from the engine control unit in plain text and also delete them

Individual design:
Whether it's the individual start screen or the selection from a variety of different widgets. Make the display your display!

Access to all data from the engine control unit:
We supply your display with a ready-made TRI file as standard. All sensors that are queried are defined here.
Temperatures:
Engine water temperature, oil temperature, intake temperature, fuel temperature,

Pressures:
Boost pressure, ambient pressure, fuel pressure

Lambda/mixture:
Lambda value, short-term lambda adjustment, long-term lambda adjustment, MAF, engine load

Driver dynamics:
rBem pressure, steering angle, vehicle speed, throttle angle

Other:
RPM, fuel level, 4x wheel speed, vehicle speed, total ignition angle, gear

If values are missing, they can easily be added.

ATTENTION: not every engine offers all values!

For which engines and models is the Toyota GT86/ Subaru BRZ display:
The display panel fits all Toyota GT86 and Subaru BRZ left-hand drive vehicles. A version for RHD (right-hand drive) is also available.

MFD28 Technical data:
- Dimensions: 70.3 x 52mm 
- Hardware: 2.8" TFT screen, touchscreen, MicroSD, MicroUSB
- High-quality milled aluminum front frame
- Symmetrical display - ideal for rotating it by 90
- Views completely freely configurable on the PC with our DSS - Display Setup Software
- Up to 64 widgets per display
- 64 sensors (Can Bus + internal)
- 10 views
- 4x analog inputs
- Optional external switching flash
- Can bus switching
- Can Bus protocols: UDS, KWP2000, OBD

Supported values:
Many KViele customers always ask: "Which values can I query from my control unit? The answer: "ALL". Our MFD28 is compatible with ISO 11898-2 and SAE J2284.
The control unit manufacturers themselves determine which values are sent via the CAN bus interface. The documentation is important here - possibly even in the form of a DBC file that can be imported directly. You can also access our extensive list of already implemented control units. This can be found in the download area. A total of up to 50 sensors can be queried if the manufacturer supports this.
Broadcast data as well as OBD2 queries via Can Bus (11bit/29bit) are implemented. Special protocols such as TP2.0 from VW/Audi and UDS are also available.

DSS - Display Setup Software:
With our DSS - Display Setup Software, the display can be conveniently configured on the PC. The Can Bus protocol can be customized, you can import DBC files and design the displays with your own widgets.
The log viewer downloads log files from the display. These can then be viewed and values can be individually selected and scaled.
A built-in Can Bus logger allows you to take a close look at the log. This can be used to reverse-engineer unknown Can Buses.

Please enter a valid email address.
Please enter a valid question.
Fields marked with * are mandatory.

There aren't any asked questions yet.
Zuletzt gesehene Produkte

Zuletzt gesehene Produkte

Panel Filter | fits BMW M2/M235i (F87/F22/F23) N55 | Eventuri
Facts: Material: Carbon Manufacturer: Eventuri The Eventuri philosophy of challenging the standard for existing aftermarket solutions is also reflected in the panel filters. The best design, relentless testing to perfection and the latest prototyping methods result in an exceptional product. With the panel filters, the focus is on performance, which is guaranteed by CFD analyses, airflow tests, inlet temperatures and extensive dyno tests. Each panel filter is designed to fit into the OEM filter housings. Compatible vehicles:VehicleTypePower outputengine capacityEngineYear of construction BMW 2 Series (F22/F23)M235i / xDrive240kW / 326PS2979ccN55 B30 A10.13 - 06.16 BMW 2 Series Coupe (F87)M2272kW / 370hp2979ccN55 B30 A11.15 - 06.18

€109.00*
Rear wing | fits BMW 4 Series/M4 (F32/F82) | AIRCONCEPT
Suitable for the following models: BMW 4 Series (F32) Coupe M4 (F82) Aerodynamic wing for the F32 and F82. The wing can be adjusted in three stages to adapt to different routes. Adjustment takes seconds and requires no tools. Objective: Stabilises straight-line stability and cornering at high speeds. - Made from cnc-milled aluminium parts and high-quality carbon - Finish: polished visible carbon | black anodised aluminium - three-way adjustable - incl. mounting material - very easy to fit - with ABE

€4,085.00*
Front lip Carbon | fits Lamborghini Aventador | Vorsteiner
The Vorsteiner carbon front lip for Lamborghini Aventador Zaragoza Edizione provides more downforce on the front axle. Made from autoclaved prepreg carbon.Expert opinion: Material certificate Compatible vehicles:LAMBORGHINI AVENTADOR Coupe 6.5 LP 700-4 AWD Since 2011LAMBORGHINI AVENTADOR Roadster 6.5 LP 700-4 AWD Since 2013LAMBORGHINI AVENTADOR Roadster 6.5 LP 700-4 SV AWD Since 2016

€6,901.00*
Performance increase via additional control unit | fits BMW M5 Competition (F90 LCI) 625hp S63
Facts:- Plug & Play installation using illustrated installation instructions- Special wiring harness for your vehicle- High-quality electronics “Made In Germany”- Electronic components with product qualification for motor vehicles according to AEC-Q100 installed- Support from us as co-developer and manufacturer Scope of delivery:The scope of delivery includes the motorsport add-on module, an engine-specific wiring harness, illustrated installation instructions in DE/EN and a BYPASS connector, which you can use to restore your vehicle to series production. Compatible vehicles: VehicleVehicle typePowerEngine capacityEngine typeYear of constructionBMW 5er (F90 LCI)M5 Competition460kW / 625hp4395cm³S63 B44 B07.18 - LEGAL INFORMATION: THE INSTALLATION OF ADDITIONAL ELECTRONICS IS A STRUCTURAL MODIFICATION TO THE MANUFACTURER'S ELECTRONICS. WITHOUT REGISTRATION IN THE VEHICLE DOCUMENTS BY MEANS OF AN INDIVIDUAL CERTIFICATE FROM TÜV; DEKRA OR OTHER RECOGNIZED TESTING INSTITUTES, THE INSTALLATION WILL INVALIDATE THE OPERATING LICENSE. IF USED ON PUBLIC ROADS, THIS WILL RESULT IN THE LOSS OF INSURANCE COVER. WE DO NOT CURRENTLY HAVE A PARTS CERTIFICATE FOR YOUR VEHICLE. THEREFORE, THIS SYSTEM IS EXCLUSIVELY SUITABLE FOR MOTORSPORT. ATTENTION: IF YOU USE THE ADDITIONAL ELECTRONICS, YOU MAY LOSE YOUR WARRANTY CLAIMS AGAINST THE SELLER OR WARRANTY CLAIMS AGAINST THE MANUFACTURER. IF YOU HAVE ANY FURTHER QUESTIONS, PLEASE DO NOT HESITATE TO CONTACT US!

€1,699.00*
Rear wing in GTS-style Carbon | fits BMW M4 incl. Competition/CS/GTS (F82) | RKP
The rear wing from RKP was designed as a flawless replica of the F82 wing and represents not only the shape of the wing, but also the construction, the material quality and above all the mounting and assembly technology.RKP remains the only manufacturer in the world that pays the highest attention to installation hardware and offers hardware that exactly matches the original BMW hardware, resulting in a perfect fit and the installation process of the original equipment. RKP's M4 GTS wing includes aluminum wing supports, all necessary stamped aluminum hardware to securely mount the wing to the inside of the trunk, and most importantly a full carbon fiber wing body and end plates. Vehicles built prior to January 15th will need to purchase new newer style trunk hinges**. Compatible vehicles:BMW M4 317kW/431hpBMW M4 Competition 331kW/450hpBMW M4 CS 338kW/460hpBMW M4 GTS 368kW/500hp The article has the following certificate: Material certificate

€5,324.00*