Competition intercooler kit | fits Audi RS6 (C6/4F) 580hp | Wagner Tuning

The Vorsteiner VRS carbon rear wing for the Audi R8 V10 provides significantly higher downforce on the rear axle and ensures an absolute racing feeling on the road. The rear wing manufactured for the Audi R8 is made of high-quality prepreg carbon fibre and features high-quality autoclave processing of the materials. The rear wing from Vorsteiner is an absolute highlight on the road, and the rear wings are a perfect fit and plug & play. Expertise: Material certificate Compatible vehicles:AUDI R8 (4S3, 4SP) 5.2 FSI quattro Since 2015AUDI R8 Spyder (4S9, 4SR) 5.2 FSI quattro Since 2017

No detail is too small to customise: Enthusiasts know that every change can make a big difference. The same goes for this AutoTecknic carbon fibre side vent kit. When it comes to carbon fibre, you're guaranteed to get a unique and lightweight design, not to mention incredible robustness. Leave no stone unturned when it comes to your vehicle. Bring your vision to life with AutoTecknic. Product info:- Suitable for F95 X5M models- 2x2 glossy carbon fibre fabric- Sold as a pair (as a set)- OEM X5M side grills are not included Compatible vehicles:BMW X5 (G05, F95) M 2019-2023BMW X5 (G05, F95) M Competition since 2019

The Competition water cooler kit is suitable for the following models:Volkswagen T6 2.0 TDI: 62-110KW/84-150hp (2016-2019)Volkswagen T6.1 2.0 TDI: 66-110KW/84-150hp (2019-)Volkswagen T6 2.0BiTDI: 146-150KW/199- 204hp (2016-2019)Volkswagen T6.1 2.0BiTDI: 146-150KW/199- 204hp (2019-) Maximum performance and optimum cooling for your VW T6/T6.1 2.0 TDI with our Competition water cooler kit. The 2.0-liter TDI engine of the VW T6/T6.1 is equipped with an indirect charge air cooling circuit, which does not cool the charge air with ambient air as usual, but with its own cooling water circuit. A reduction in the cooling water temperature leads directly to an improved cooling performance of the charge air. This is where the advantages of our Wagner Tuning Upgrade water cooler come into play. Our newly developed competition racing nets increase the radiator volume of the standard water cooler by an impressive 30%. The ratio between the inner and outer cooling surface ensures maximum heat transfer and at the same time allows sufficient airflow for adjacent components such as the engine water cooler. The increased cooling water volume means that the entire system thermal can be kept at a lower level over a longer period of time. All Wagner Tuning water coolers are equipped with a thermally conductive anti-corrosion coating that ensures a long-lasting cooling effect. Installation of the system is uncomplicated and almost plug-and-play thanks to our detailed installation instructions. Prepare your VW T6/T6.1 2.0 TDI for maximum performance and optimum cooling with our Competition water cooler kit. Dimensions OEM water cooler:714 mm x 245 mm x 54 mmV = 9.5 litersA = 1750 cm² Wagner Tuning water cooler dimensions:710 mm x 311 mm x 56 mmV = 12.4 liters (+30%)A = 2208 cm² (+26%) Scope of delivery:1x frontal water cooler black coated (low temperature circuit)1x installation instructionsAttention: Not approved in the area of the StVZO.

The 3DDesign carbon side skirts for the F82 provide an extremely sporty transition from the front to the rear of the 4 Series. The use of the side skirts also improves the aerodynamics of the entire vehicle. As the side skirts are made entirely of carbon fibre, they easily meet all requirements in terms of lightweight construction.Incl. parts certificate Compatible vehicles:BMW 4 Convertible (F33, F83) M4 2014-2020BMW 4 Convertible (F33, F83) M4 Competition 2016-2020BMW 4 Coupe (F32, F82) M4 2014-2020BMW 4 Coupe (F32, F82) M4 CS 2017-2019BMW 4 Coupe (F32, F82) M4 Competition 2016-2020BMW 4 Coupe (F32, F82) M4 GTS 2016-2019

KW V2 coilover suspension For more stability or driving comfort. With adjustable rebound damping.Sporty drivers who want more than just an outstanding look thanks to stepless lowering in the tested adjustment range will find the ideal suspension solution in the KW V2 coilover suspension in the typical KW "inox-line". In addition to the high-quality workmanship, the use of rust-free stainless steel struts, corrosion-resistant components and the convincing durability, the KW V2 convinces with the possibility of additionally adapting the damper setup to your own requirements with the rebound stage adjustable in 16 clicks. More comfort or more sport - you decideAs with all KW coilover suspensions, the KW engineers develop the vehicle-specific KW damper tuning, which is appreciated by car enthusiasts worldwide, in extensive test cycles on the Nürburgring Nordschleife and in our test centre on the KW 7-post driving dynamics test bench. With a KW coilover suspension you will experience your car more directly and dynamically. With the KW V2, as an experienced sports driver, you can influence the handling and comfort yourself with the individually adjustable rebound damping. The 16 precise clicks allow you to tune the KW dampers to be firmer or more comfortable without affecting the bottom valve of the compression stage. Depending on the vehicle type, the rebound valves of the KW twin-tube dampers are adjusted at the upper end of the piston rod via an integrated adjustment wheel or the slip-on adjustment wheel included in the scope of delivery. By increasing the rebound force via the adjustment wheel, the body movements on the body are reduced. As a result, your car will track more accurately and you will have even more stability at higher cornering speeds. If, for example, you change the approved wheel/tyre combinations of your car manufacturer for larger rims, you can use the KW V2 with adjustable rebound to perfectly match the handling of your car and your new alloy wheels. KW quality - your satisfaction is our incentiveDuring production at our headquarters in Fichtenberg, the KW Variant 2 "inox-line" coilover suspension kits are subjected to extensive tests during the production process in order to fulfil our quality standards. Every single damper and every suspension is extensively tested. As a German manufacturer, it is a matter of course for us to provide a warranty of up to 5 years on our coilover suspension kits, which exceed the requirements of the original equipment industry, and on our suspension programme comprising over 4,600 applications when installed by one of our KW specialist dealers. Finally, KW coilover suspension struts are 100 per cent rust-free under all weather conditions and have an unlimited service life. The function of the stepless lowering via the dirt-resistant trapezoidal thread and the polyamide threaded ring on the KW V2 is also designed for many years of use. In a salt spray test, no oxidation occurred on the KW coilover struts. This means that the adjustment of the stepless lowering is not affected even after years of use. - Damping technology adjustable in the rebound stage in 16 exact clicks- Stainless steel technology inox-line- Individual, stepless lowering- Tested adjustment range- Ready-to-install complete solution- high-quality components for a long service life- Complete documentation for easy application Setup - Adjustable rebound damping with 16 clicks.With the KW V2, you can further adjust the vehicle-specific KW damper tuning, which is appreciated by car enthusiasts worldwide, with 16 clicks. The rebound adjustment allows you to take into account the changes in driving dynamics that result from changing the complete set of wheels or fitting winter tyres. The damper characteristic curve of the weather-resistant KW V2 coilover suspension can be adjusted to be firmer or more comfortable, depending on your own requirements. The suspension is suitable for all sporty drivers who want more than just stepless lowering for their driving pleasure. Please note the conditions and instructions for this product: - VA + HA height adjustable (VA coilover struts, HA springs with height adjustment + damper) - When used with standard wheel/tyre combinations, additional commercially available track wideners from the accessories may be required - Dampers have easy-to-use adjustment wheels. Due to the design, the rebound stage can only be adjusted when the piston rod is accessible. - For camber correction on the rear axle, we recommend the use of the adjustable KW control arm. Vehicle-specific KW control arms can be found in the accessories table. Technical information: Product line: Street Performance Lowering VA/HA (mm): 25-45/25-40 Design: V2 Hardness adjustment: Rebound Material: Stainless steel Adjustment VA/HA: Thread/thread Approval: Parts certificate (§19.3) Compatible vehicles: Manufacturer Model Version Body Fuel Performance Displacement Cylinder Drive MINI MINI (F56) FML2, UKL-L 12/2013- Cooper SE / Electric Hatchback Electric 135 KW 0 ccm 0 Front-wheel drive