Free shipping
info@aulitzkytuning.de
+49 (0)9874 6891630

Charger GYSFLASH 8.12 / 12.12

From €122.60*

Delivery time: approx. 3-7 working days*

Variant
Product number: ATGYSFLASH
Product information "Charger GYSFLASH 8.12 / 12.12"

GYSFLASH 8.12

The GYSFLASH 8.12 is suitable for charging 12V batteries in cars, commercial vehicles, campers, and trucks. The device features an intelligent eight-stage charging curve and a “supply” mode for supplying vehicles in the showroom.

UNIVERSAL: IDEAL FOR CARS & COMMERCIAL VEHICLES
• Specially designed for 12V batteries (lead-acid) from 15 to 160Ah, trickle charging is possible for battery capacities up to 240Ah.
• 2 charging options for adjusting the charging curve:
- AGM: Special charging at low temperatures (below 5°C) and for start-stop batteries (AGM).
- Refresh: Revitalization and restoration of deeply discharged batteries.
• Supply mode, which turns the charger into a stabilized voltage source:
- Securing the power supply for demonstration vehicles in the showroom.
- Supplying the vehicle electrical system during battery replacement to secure stored data.
• Improved charge retention: the charger can remain connected to the battery for long periods of time. The “Auto Restart” function saves the settings in the event of a power failure.

100% AUTOMATIC CHARGING
• The eight-stage, monitoring-free charging and maintenance phase maximizes the battery's service life and performance.
• Recovery of deeply discharged batteries >2V (SOS Recovery).

VERY SAFE
• Protection of device electronics: Protection against short circuits, reverse polarity, and overvoltage. Anti-spark system.
• Automatic standby mode when battery is disconnected.
• Integrated temperature sensor prevents internal electronics from overheating.
• Simplified user interface prevents incorrect use.

ERGONOMIC
• Compact design, lightweight and portable.
• Completely dustproof and waterproof housing (IP65).
• Optional wall mounting.

Supplied with clamps (1.9 m).

GYSFLASH 12.12

The GYSFLASH 12.12 is designed for charging 12V batteries in cars, commercial vehicles, and agricultural vehicles. The device features an intelligent eight-stage charging curve and a “supply” mode for powering display vehicles in showrooms.

IDEAL FOR EVERYTHING FROM CARS TO TRUCKS
• Specially designed for 12V batteries (lead-acid) from 20 to 250Ah, trickle charging up to 330Ah possible.
• 2 optional settings for adjusting the charging behavior:
- AGM: Special charging for start-stop batteries (AGM).
- Refresh: Revitalization and restoration of deeply discharged batteries.
• Supply mode turns the charger into a stabilized voltage source:
- Securing the power supply for demonstration vehicles in the showroom.
- Supply of the vehicle electrical system during battery replacement to secure memory contents.
• Improved charge retention: the charger can remain connected to the battery, thus always guaranteeing a smooth start. The “Auto Restart” function saves the settings in the event of a power failure.

100% AUTOMATIC CHARGING
• The eight-stage, monitoring-free charging and maintenance phase maximizes the battery's service life and performance.
• An outside air temperature sensor for optimal battery charging in summer and winter. The charger precisely adjusts the charging settings to the ambient temperature.
• Recovery of deeply discharged batteries >2V (SOS Recovery).

ULTRA SAFE
• Protection of device electronics: Protection against short circuits, reverse polarity, and overvoltage. Anti-spark system.
• Automatic standby mode when battery is disconnected.
• Integrated temperature sensor prevents internal electronics from overheating.
• Simplified user interface prevents incorrect use.

ERGONOMIC
• Compact design, lightweight and portable.
• Completely dustproof and waterproof housing (IP65).
• Optional wall mounting.

Supplied with clamps (145 cm).

Please enter a valid email address.
Please enter a valid question.
Fields marked with * are mandatory.

There aren't any asked questions yet.
Zuletzt gesehene Produkte

Zuletzt gesehene Produkte

Competition Intercooler Kit | fits Ford Ranger Mk3 (TKE) 2.2 TDCi | Wagner Tuning
The Competition intercooler kit is suitable for:Ford Ranger PX2 2,2TDCi (96KW-125KW/130-170hp) 2016-2019 Experience an increase in performance and improved cooling with the Wagner Tuning Competition high-performance intercooler for the Ford Ranger. With an innovative competition mesh (Tube Fin) and impressive dimensions of 660 mm x 282 [254] mm x 120 [65] mm [stepped], this intercooler offers an external mesh volume of 21.3 litres. This means a 32% larger frontal inflow area and an incredible 279% more external net volume compared to the standard intercooler. The cast aluminium end boxes were developed in CAD design and optimised using CFD simulations to ensure ideal internal airflow. Thanks to special air routing in the radiator inlet, an even filling of the intercooler network is achieved. The result is outstanding cooling properties with minimal back pressure. In addition, the innovative competitive high-performance network ensures sufficient airflow for neighbouring components such as the water cooler and is also very lightweight. You can look forward to optimum cooling of the supercharged air and a noticeable increase in performance! Our Wagner Tuning intercoolers are provided with a high-quality anti-corrosion coating that offers excellent heat conduction properties. As a result, they are optimally protected against environmental influences and guarantee a long-lasting and optimum cooling effect. Installation is very simple at the original mounting points and is a plug-and-play process. You do not need any additional adjustments. At Wagner Tuning, we continuously attach great importance to quality monitoring in order to offer you the best possible product quality. Discover the Wagner Tuning Competition high performance intercooler now and experience a new dimension of performance and cooling for your Ford Ranger. Get your vehicle ready for impressive driving experiences! Advantages of the Wagner Tuning intercooler:- improved cooling performance- 32% larger inflow area- 279% more net volume- flow-optimised airflow- Plug & Play Inlet diameter Ø60 mmOutlet diameter Ø60 mm OEM intercooler:670 mm x 210 mm x 40 mmV = 5.62 LITRESA = 1407 cm² Wagner Tuning intercooler:660 mm x 282 [254] mm x 120 [65] mm [stepped]V = 21.3 LITRESA = 1861 cm² Scope of delivery:1 intercooler2 silicone hoses1 mounting material1 installation instruction Attention: Not authorised in the area of the StVZO.

€1,020.00*
Competition Intercooler Kit | fits Nissan GT-R Mk1 (R35) 3.8 V6 485hp | Wagner Tuning
Competition Intercooler Kit fits for:Nissan GT-R 2008-2010 357KW/485hp Exceed all expectations with our Competition high performance intercooler kit for the Nissan GT-R R35! Our competition high performance intercoolers for the Nissan GT-R R35 set new standards. With net dimensions of 2x (360 mm x 294 mm x 110 mm) and an impressive charge air volume of 23.3 litres, these intercoolers offer a massive 76% larger flow area and an incredible 94% more charge air volume compared to the factory intercoolers. The Competition high performance mesh provides outstanding cooling characteristics and ensures that your Nissan GT-R always delivers optimum performance. The cast aluminium end boxes of our intercoolers were developed in the CAD system and optimised with the help of flow analyses in the CFD system. The connection diameters at the inlet and outlet have been extended to Ø70 mm, which is why our kit is supplied with reinforced silicone hoses. Our intercooler kit includes matching carbon air ducts, which ensure optimum airflow to the intercoolers and thus provide outstanding cooling performance with minimal back pressure.Our high-performance intercoolers have a tested pressure resistance of up to 6 bar, making them perfect for racing. All our intercoolers are coated with an anti-corrosion coating that provides excellent heat conduction properties. This guarantees long-lasting and optimum cooling, resulting in a noticeable increase in performance. Our kit is completely ready to install and enables easy replacement with the factory intercoolers. All our products are subject to strict quality control procedures to ensure the highest standards. Your Nissan GT-R R35 deserves the best! With our Competition High Performance Intercooler Kit, you'll take your GT-R's performance to the next level and dominate the road. Prepare to push the limits of your Nissan GT-R R35 and enjoy a driving experience like never before! Advantages of the Wagner Tuning intercooler:- improved cooling performance- 76% larger inflow area- 94% more charge air volume- Inlet and outlet extended to Ø70 mm- Minimal back pressure- Plug & Play Scope of delivery:2 intercoolers, black powder-coated4 cast aluminium connectors2 silicone hoses1 carbon air duct1 mounting material1 assembly instructions Attention: Not authorised in the area of the StVZO.

€3,440.00*
Front lip Carbon | fits BMW M2 Competition/CS (F87) S55 | RKP
The competition lip is not only functional and visually attractive, it is also easy to fit. An internal metal reinforcement of the bumper helps to distribute the aerodynamic loads on the bumper, eliminating the need for more complex mounting solutions. The pre-applied industrial strength double-sided adhesive tape ensures good adhesion to key areas on the bumper surface. Details: - Flawless fit- Extremely light and rigid- Dupont clear coated and highly polished- Made in the USA Compatible vehicles:BMW M2 Competition 302kW/411hpBMW M2 CS 331kW/450hp The article has the following certificate: Material certificate

€2,278.00*
Performance increase via additional control unit | fits BMW M2 CS (F87) 450hp
Facts:- Plug & Play installation using illustrated installation instructions- Special wiring harness for your vehicle- High-quality electronics “Made In Germany”- Electronic components with product qualification for motor vehicles according to AEC-Q100 installed- Support from us as co-developer and manufacturer Scope of delivery:The scope of delivery includes the motorsport add-on module, an engine-specific wiring harness, illustrated installation instructions in DE/EN and a BYPASS connector, which you can use to restore your vehicle to series production. Compatible vehicles: VehicleVehicle typePowerEngine capacityEngine typeYear of constructionBMW 2er Coupe (F87)M2 CS331kW / 450hp2979cm³S55 B30 A11.19 - 06.21 LEGAL INFORMATION: THE INSTALLATION OF ADDITIONAL ELECTRONICS IS A STRUCTURAL MODIFICATION TO THE MANUFACTURER'S ELECTRONICS. WITHOUT REGISTRATION IN THE VEHICLE DOCUMENTS BY MEANS OF AN INDIVIDUAL CERTIFICATE FROM TÜV; DEKRA OR OTHER RECOGNIZED TESTING INSTITUTES, THE INSTALLATION WILL INVALIDATE THE OPERATING LICENSE. IF USED ON PUBLIC ROADS, THIS WILL RESULT IN THE LOSS OF INSURANCE COVER. WE DO NOT CURRENTLY HAVE A PARTS CERTIFICATE FOR YOUR VEHICLE. THEREFORE, THIS SYSTEM IS EXCLUSIVELY SUITABLE FOR MOTORSPORT. ATTENTION: IF YOU USE THE ADDITIONAL ELECTRONICS, YOU MAY LOSE YOUR WARRANTY CLAIMS AGAINST THE SELLER OR WARRANTY CLAIMS AGAINST THE MANUFACTURER. IF YOU HAVE ANY FURTHER QUESTIONS, PLEASE DO NOT HESITATE TO CONTACT US!

€1,499.00*
%
Diffusor Carbon | fits Mini Cooper S JCW / JCW (F55/F56) | 3DDesign
The 3DDesign carbon diffuser for Mini Cooper JCW F55 F56 with PDC provides even more sportiness at the rear of the John Cooper Works in no time at all. The diffuser is made entirely of carbon fiber and has extra cut-outs for the Park Distance Control system. Incl. parts certificate for the F56.Material certificate for the F55 Compatible vehicles:MINI (F55) Cooper S JCW Since 2013MINI (F56) Cooper S JCW Since 2013MINI (F56) John Cooper Works Since 2015

€840.00* €1,400.00* (40% saved)