Aulitzky Tuning | Performance increase via additional control unit | BMW M340d/M440d (G20/G21/G22/G23)

Suitable for the following models: BMW 4 Series (G22) Coupe M4 (G82) XWINX - The aerodynamic wing for the BMW 4 Series (G22) and M4 (G82) is four-way adjustable to adapt to different routes. Changing the position takes less than 5 seconds and requires no tools. Objective: Stabilises cornering at high speeds. - Very good visibility through the interior rear-view mirror in any position - best downforce values of all approved wings on the market - four-way adjustable: - down = same downforce as standard - up 1 = 35% more downforce - up 2 = 65% more downforce - up 3 = 105% more downforce (for comparison: the CSL duck tail provides 20% more downforce) - Position 'down' for daily-driving - with ABE

Fakten: - 4.49“ (114mm) > 3” (76mm), replaces the main catalytic converter - with 200 cell stainless steel sports catalytic converter - Euro 6 compatible - for current OPF models - with Thermo-Integral insulation (for an extra charge) - with ECE approval* Compatible Vehicles:ManufacturerVehicleVehicle typeEngine capacityPowerEngine typeEmission standard BMWM340i xDriveG202998cm³275kW / 374PSB58B30BEuro 6d - OPF BMWM340i xDriveG202998cm³285kW / 387PSB58B30BEuro 6d - OPF BMWM440i xDriveG222998cm³275kW / 374PSB58B30BEuro 6d - OPF BMWM440i xDriveG222998cm³285kW / 387PSB58B30BEuro 6d - OPF Note: Depending on the software version, the engine indicator light may light up. We recommend a software adjustment in this case. *This downpipe has ECE approval so that it can be used within the scope of the StVZO without registration in the vehicle documents.

Facts: - Tailpipes 4x black - 3.0 inch stainless steel - MSD removal - electric flaps - Made in Germany (Lake Constance) - with/without ECE approval (depending on choice of flap control)* Scope of delivery: - 1x Aulitzky Exhaust rear silencer - 4x tailpipes black - ECE handout Compatible vehicles: VehicleVehicle typePower outputengine capacityEngineYear of constructionBMW 3er (G20/G21)M340i xDrive275kW / 374PS2998cm³B58 B30 B07.19 -BMW 3er (G20/G21)M340i xDrive285kW / 387PS2998cm³B58 B30 B03.19 -BMW 4er (G22/G23)M440i xDrive275kW / 374PS2998cm³B58 B30 B11.20 -BMW 4er (G22/G23)M440i xDrive285kW / 387PS2998cm³B58 B30 B07.20 - *ATTENTION!In conjunction with the standard or ECE flap control system (with type approval), this flap rear silencer has ECE approval so that it can be used legally within the scope of the StVZO without registration in the vehicle documents. The use of flap rear silencers in conjunction with the race flap control (without approval) is not permitted for use on public roads and is only intended for racing purposes! If you nevertheless install a product without approval in your vehicle and use it within the scope of the StVZO, you are liable to prosecution. Possible consequences that you can expect in this case: Expiry of the operating license according to §19 of the StVZO and a possible resulting immobilization of the vehicle. Other possible consequences, such as a charge of tax evasion, as well as possible investigations by the environmental authorities are at the discretion of the investigators.

Funktion: - variable Klappensteuerung der originalen oder nachgerüsteten Klappenabgasanlage - über Lenkradtasten steuerbar Kompatible Fahrzeuge:HerstellerModellTypHubraum (ltr.)LeistungMotortypAbgasnorm BMWM340i xDriveG20/G212998cm³275kW / 374PSB58B30BEuro 6d - OPF BMWM340i xDriveG20/G212998cm³285kW / 387PSB58B30BEuro 6d - OPF BMWM440i xDriveG22/G232998cm³275kW / 374PSB58B30BEuro 6d - OPF BMWM440i xDriveG22/G232998cm³275kW / 374PSB58B30BEuro 6d - OPF Hinweis: Dieses Produkt ist NICHT in der StVZO zugelassen und NICHT für den Verkauf innerhalb der EU gedacht! Dieser Artikel dient ausschließlich für Show- & Motorsportzwecke und darf nicht im öffentlichen Straßenverkehr genutzt/verbaut werden. Sollte das Bauteil am/im Fahrzeug verbaut sein, erlischt die Betriebserlaubnis! Bei den abgebildeten Bildern handelt es sich um Beispielbilder.

Upgrade your BMW G20/G80 with these carbon fibre doors that enhance both style and performance. Details:- Carbon fibre doors, made from high-quality prepreg carbon fibre- Guaranteed accuracy of fit, 1:1 from the original- Largely reduced weight, the weight of the carbon fibre doors is less than 1/2 of the original doors.- Price is for 4 doors - front and rear Features:- Lightweight design: made from high quality carbon fibre, these doors are significantly lighter than the stock doors and reduce the overall weight of the vehicle for improved agility and acceleration.- Superior strength: Carbon fibre offers exceptional strength and rigidity, ensuring high durability and resilience while maintaining a slim profile.- Premium finish: The doors feature a high-gloss carbon fibre weave that gives your G20/G80 a refined, race-inspired look and complements its sporty design.- Exact fit: Designed specifically for the G20/G80, these doors offer a precise fit and seamless integration that meets OEM standards for alignment and function.- Improved performance: By reducing weight, these doors contribute to better handling, braking behaviour and improved driving dynamics.- Professional installation recommended: For best results, professional installation is recommended to ensure proper alignment and functionality with your vehicle's systems. Care instructions:Regular cleaning: Maintain carbon fibre parts by cleaning them regularly with a soft cloth and a mixture of mild soap and water. Avoid abrasive cleaners or harsh detergents that could damage the surface.Use microfibre pads and cloths: Use microfibre pads and cloths when cleaning or applying protective coatings to avoid scratching the surface.Protect the product from the sun and chemicals: Avoid direct sunlight and harsh chemicals, as these can damage the carbon fibre. If possible, use protective covers or park your vehicle in shaded areas. Installation:Although the installation of this product is relatively simple for the skilled do-it-yourselfer, we still recommend installation by a professional mechanic.No special tools are required to install this product. Scope of delivery:- 4 carbon fibre doors (2x front doors per FS/BFS, 2x rear doors per FS/BFS)- Required mounting parts Compatible vehicles:All G20/G80 models

Facts: - Charge pipe made of T-6061 aluminium in black - incl. mounting rubbers, clamps - without licence Compatible vehicles:BMW 3 (G20, G28) (2018-) M 340 i xDrive (B58 B30 B) 2998cm³ 374hp (275kW) 2019 -BMW 3 (G20, G28) (2018-) M 340 i xDrive (B58 B30 B) 2998cm³ 387hp (285kW) 2019 -BMW 3 (G20, G28) (2018-) M 340 i Mild-Hybrid xDrive (B58 B30 B, JA1) 2998cm³ 374hp (275kW) 2020 -BMW 3 Touring Van (G21) (2019-) M 340 i xDrive (B58 B30 B) 2998cm³ 374hp (275kW) 2019 -BMW 4 Coupe (G22) (2020-) M 440 i Mild-Hybrid (B58 B30 B, JA1) 2998cm³ 374hp (275kW) 2021 -BMW 4 Gran Coupe (G26) (2021-) M440 i Mild-Hybrid (B58 B30 B) 2998cm³ 374hp (275kW) 2022 -BMW Z4 Roadster (G29) (2018-) M40 i (B58 B30 C) 2998cm³ 340hp (250kW) 2018 -

The daytime running lights bring a touch of the racetrack to the front bumper of your vehicle. The running lights are inspired by the daytime running lights of the limited edition M4 G82 CSL. The price is without installation.These are the complete modules including heat sink. No complex conversion is necessary for installation, the modules can simply be plugged in (Plug&Play). Not approved in the STVZO area. Only suitable for use in motorsport. Compatible vehicles:VehicleTypePower outputDisplacementEngineYear of constructionBMW 3 Series (G80)M3353kW / 480PS2993ccS58 B30 B11.20 -BMW 3 Series (G80/G81)M3 Competition / xDrive375kW / 510PS2993cm³S58 B30 A05.21 -BMW 4 Series (G82)M4353kW / 480PS2993cm³S58 B30 B11.20 -BMW 4 Series (G82/G83)M4 Competition / xDrive375kW / 510PS2993cm³S58 B30 A05.21 -BMW 4 Series (G22/G23)4 Seriesallallall01.21 -

The rear lights in OLED optics with 3D effect make it possible to achieve a new three-dimensional and at the same time very sharply defined appearance. They are also an ideal change from the factory-fitted rear lights. - Approved in the area of the StVZO by E-mark (registration-free) - Service life of up to 50,000 hours. - The rear lights are waterproof and extremely durable. Suitable for the following models: BMW G20 saloon BMW G80 M3 Saloon For installation: The rear lights are plug & play. No coding is necessary. Scope of delivery: 1x set of rear lights (left + right)

Facts:- Plug & Play installation using illustrated installation instructions- Special wiring harness for your vehicle- High-quality electronics “Made In Germany”- Electronic components with product qualification for motor vehicles according to AEC-Q100 installed- Support from us as co-developer and manufacturer Scope of delivery:The scope of delivery includes the motorsport add-on module, an engine-specific wiring harness, illustrated installation instructions in DE/EN and a BYPASS connector, which you can use to restore your vehicle to series production. Compatible vehicles: ManufacturerVehicleVehicle typeEngine capacityPowerEngine BMWM340d xDriveG20/G212993cm³250kW / 340hpB57D30B, JA1 BMWM440d xDriveG22/G232993cm³250kW / 340hpB57D30B, JA1 LEGAL INFORMATION: THE INSTALLATION OF ADDITIONAL ELECTRONICS IS A STRUCTURAL MODIFICATION TO THE MANUFACTURER'S ELECTRONICS. WITHOUT REGISTRATION IN THE VEHICLE DOCUMENTS BY MEANS OF AN INDIVIDUAL CERTIFICATE FROM TÜV; DEKRA OR OTHER RECOGNIZED TESTING INSTITUTES, THE INSTALLATION WILL INVALIDATE THE OPERATING LICENSE. IF USED ON PUBLIC ROADS, THIS WILL RESULT IN THE LOSS OF INSURANCE COVER. WE DO NOT CURRENTLY HAVE A PARTS CERTIFICATE FOR YOUR VEHICLE. THEREFORE, THIS SYSTEM IS EXCLUSIVELY SUITABLE FOR MOTORSPORT. ATTENTION: IF YOU USE THE ADDITIONAL ELECTRONICS, YOU MAY LOSE YOUR WARRANTY CLAIMS AGAINST THE SELLER OR WARRANTY CLAIMS AGAINST THE MANUFACTURER. IF YOU HAVE ANY FURTHER QUESTIONS, PLEASE DO NOT HESITATE TO CONTACT US!

Facts:- Plug & Play installation using illustrated installation instructions- Special wiring harness for your vehicle- High-quality electronics “Made In Germany”- Electronic components with product qualification for motor vehicles according to AEC-Q100 installed- Support from us as co-developer and manufacturer Scope of delivery:The scope of delivery includes the motorsport add-on module, an engine-specific wiring harness, illustrated installation instructions in DE/EN and a BYPASS connector, which you can use to restore your vehicle to series production. Compatible vehicles: ManufacturerVehicleVehicle typeEngine capacityPowerEngineEmission standard BMWM340i xDriveG20/G212998cm³275kW / 374hpB58B30BEuro 6d - OPF BMWM340i xDriveG20/G212998cm³285kW / 387hpB58B30BEuro 6d - OPF BMWM440i xDriveG22/G232998cm³275kW / 374hpB58B30BEuro 6d - OPF BMWM440i xDriveG22/G232998cm³275kW / 374hpB58B30BEuro 6d - OPF LEGAL INFORMATION: THE INSTALLATION OF ADDITIONAL ELECTRONICS IS A STRUCTURAL MODIFICATION TO THE MANUFACTURER'S ELECTRONICS. WITHOUT REGISTRATION IN THE VEHICLE DOCUMENTS BY MEANS OF AN INDIVIDUAL CERTIFICATE FROM TÜV; DEKRA OR OTHER RECOGNIZED TESTING INSTITUTES, THE INSTALLATION WILL INVALIDATE THE OPERATING LICENSE. IF USED ON PUBLIC ROADS, THIS WILL RESULT IN THE LOSS OF INSURANCE COVER. WE DO NOT CURRENTLY HAVE A PARTS CERTIFICATE FOR YOUR VEHICLE. THEREFORE, THIS SYSTEM IS EXCLUSIVELY SUITABLE FOR MOTORSPORT. ATTENTION: IF YOU USE THE ADDITIONAL ELECTRONICS, YOU MAY LOSE YOUR WARRANTY CLAIMS AGAINST THE SELLER OR WARRANTY CLAIMS AGAINST THE MANUFACTURER. IF YOU HAVE ANY FURTHER QUESTIONS, PLEASE DO NOT HESITATE TO CONTACT US!

Perfectly shaped, sporty carbon fibre front lip for the BMW 3 Series G20 M340i and with M package. No compromises were made in the production and design of the latest addition to the 3DDesign portfolio: Perfect quality meets a design that blends seamlessly into the design concept of the new G20 and G21. Sporty and elegant - a real eye-catcher. Fits only on the M-package front. Compatible vehicles:BMW 3 (G20, G80, G28) 316 d since 2020BMW 3 (G20, G80, G28) 316 d Mild-Hybrid Since 2020BMW 3 (G20, G80, G28) 318 d 2019-2020BMW 3 (G20, G80, G28) 318 d Mild-Hybrid Since 2020BMW 3 (G20, G80, G28) 318 i Since 2020BMW 3 (G20, G80, G28) 320 d Since 2018BMW 3 (G20, G80, G28) 320 d Mild-Hybrid Since 2020BMW 3 (G20, G80, G28) 320 d Mild-Hybrid xDrive Since 2020BMW 3 (G20, G80, G28) 320 d xDrive 2018-2020BMW 3 (G20, G80, G28) 320 e Plug-in Hybrid Since 2020BMW 3 (G20, G80, G28) 320 i Since 2019BMW 3 (G20, G80, G28) 320 i 1.6 Since 2019BMW 3 (G20, G80, G28) 320 i xDrive Since 2019BMW 3 (G20, G80, G28) 330 d Since 2019BMW 3 (G20, G80, G28) 330 d Mild-Hybrid Since 2020BMW 3 (G20, G80, G28) 330 d Mild-Hybrid xDrive Since 2020BMW 3 (G20, G80, G28) 330 d xDrive Since 2019BMW 3 (G20, G80, G28) 330 e Plug-in Hybrid Since 2019BMW 3 (G20, G80, G28) 330 e Plug-in Hybrid xDrive Since 2020BMW 3 (G20, G80, G28) 330 i Since 2018BMW 3 (G20, G80, G28) 330 i xDrive Since 2018BMW 3 (G20, G80, G28) M 340 i xDrive Since 2019BMW 3 (G20, G80, G28) M340 d Mild-Hybrid xDrive Since 2020

Elegant, sporty boot spoiler made of carbon fibre for the BMW 3 Series G20 with M package. No compromises were made in the manufacture and design of the latest addition to the 3D design portfolio: Perfect quality meets a design that blends seamlessly into the design concept of the new G20. Sporty and elegant - a real eye-catcher. Compatible vehicles:BMW 3 (G20, G80, G28) 316 d since 2020BMW 3 (G20, G80, G28) 316 d Mild-Hybrid Since 2020BMW 3 (G20, G80, G28) 318 d 2019-2020BMW 3 (G20, G80, G28) 318 d Mild-Hybrid Since 2020BMW 3 (G20, G80, G28) 318 i Since 2020BMW 3 (G20, G80, G28) 320 d Since 2018BMW 3 (G20, G80, G28) 320 d Mild-Hybrid Since 2020BMW 3 (G20, G80, G28) 320 d Mild-Hybrid xDrive Since 2020BMW 3 (G20, G80, G28) 320 d xDrive 2018-2020BMW 3 (G20, G80, G28) 320 e Plug-in Hybrid Since 2020BMW 3 (G20, G80, G28) 320 i Since 2019BMW 3 (G20, G80, G28) 320 i 1.6 Since 2019BMW 3 (G20, G80, G28) 320 i xDrive Since 2019BMW 3 (G20, G80, G28) 330 d Since 2019BMW 3 (G20, G80, G28) 330 d Mild-Hybrid Since 2020BMW 3 (G20, G80, G28) 330 d Mild-Hybrid xDrive Since 2020BMW 3 (G20, G80, G28) 330 d xDrive Since 2019BMW 3 (G20, G80, G28) 330 e Plug-in Hybrid Since 2019BMW 3 (G20, G80, G28) 330 e Plug-in Hybrid xDrive Since 2020BMW 3 (G20, G80, G28) 330 i Since 2018BMW 3 (G20, G80, G28) 330 i xDrive Since 2018BMW 3 (G20, G80, G28) M 340 i xDrive Since 2019BMW 3 (G20, G80, G28) M340 d Mild-Hybrid xDrive Since 2020

Perfectly shaped, sporty spoiler made of carbon for the BMW 3 Series G20 M340i and with M package. No compromises were made in the production and design of the latest addition to the 3DDesign portfolio: Perfect quality meets a design that blends seamlessly into the design concept of the new G20. Sporty and elegant - a real eye-catcher. Fits only on the M package front. Compatible vehicles:BMW 3 (G20, G80, G28) 316 d Since 2020BMW 3 (G20, G80, G28) 316 d Mild-Hybrid Since 2020BMW 3 (G20, G80, G28) 318 d 2019-2020BMW 3 (G20, G80, G28) 318 d Mild-Hybrid Since 2020BMW 3 (G20, G80, G28) 318 i Since 2020BMW 3 (G20, G80, G28) 320 d Since 2018BMW 3 (G20, G80, G28) 320 d Mild-Hybrid Since 2020BMW 3 (G20, G80, G28) 320 d Mild-Hybrid xDrive Since 2020BMW 3 (G20, G80, G28) 320 d xDrive 2018-2020BMW 3 (G20, G80, G28) 320 e Plug-in Hybrid Since 2020BMW 3 (G20, G80, G28) 320 i Since 2019BMW 3 (G20, G80, G28) 320 i 1.6 Since 2019BMW 3 (G20, G80, G28) 320 i xDrive Since 2019BMW 3 (G20, G80, G28) 330 d Since 2019BMW 3 (G20, G80, G28) 330 d Mild-Hybrid Since 2020BMW 3 (G20, G80, G28) 330 d Mild-Hybrid xDrive Since 2020BMW 3 (G20, G80, G28) 330 d xDrive Since 2019BMW 3 (G20, G80, G28) 330 e Plug-in Hybrid Since 2019BMW 3 (G20, G80, G28) 330 e Plug-in Hybrid xDrive Since 2020BMW 3 (G20, G80, G28) 330 i Since 2018BMW 3 (G20, G80, G28) 330 i xDrive Since 2018BMW 3 (G20, G80, G28) M 340 i xDrive Since 2019BMW 3 (G20, G80, G28) M340 d Mild-Hybrid xDrive Since 2020

Eibach Pro-Kit performance suspension springs for front and rear axle E10-20-045-07-22 The Eibach Pro-Kit lowering springs are the ideal solution for your vehicle, as the kit lowers the centre of gravity, reduces rebound when accelerating, reduces body roll when cornering and dips when braking. As a result, understeer and oversteer no longer occur. Lowering the vehicle with the Pro-Kit springs reduces the standard distance between the tyres and the wheel arch and gives the vehicle a sporty look. In addition, the handling of the vehicle is maximised. The Eibach Pro-Kits are designed by Eibach suspension engineers and test experts to deliver a combination of sporty looks and performance without compromising on safety or ride quality. - Developed and tested for combination with standard and aftermarket dampers- Component of the Eibach Pro system- Top performance handling- Lowers the vehicle's centre of gravity by up to 40 mm (depending on the vehicle)- Spring design for traction and attraction- Progressive suspension characteristics- Performance handling- ABE or parts certificate Note: Only for vehicles without levelling control. Information:- Lowering front axle: approx. 30mm- Lowering rear axle: approx. 25mm- Type of approval: with expert opinion- Suspension: for all standard damping systems- Illustration may differ from the original Compatible vehicles:- Axle load front axle: up to 1170kg- Axle load rear axle: up to 1410kg- EC type approval number: e1*2007/46*2017*..- Only for vehicles without levelling system BMW 3 Series Touring (G21) year of construction 07.19-330d xDrive Mild HybridM340d xDrive Mild Hybrid

Eibach Pro-Kit performance suspension springs for front and rear axle E10-20-045-05-22 The Eibach Pro-Kit lowering springs are the ideal solution for your vehicle, as the kit lowers the centre of gravity, reduces rebound when accelerating, reduces body roll when cornering and dips when braking. As a result, understeer and oversteer no longer occur. Lowering the vehicle with the Pro-Kit springs reduces the standard distance between the tyres and the wheel arch and gives the vehicle a sporty look. In addition, the handling of the vehicle is maximised. The Eibach Pro-Kits are designed by Eibach suspension engineers and test experts to deliver a combination of sporty looks and performance without compromising on safety or ride quality. - Developed and tested for combination with standard and aftermarket dampers- Component of the Eibach Pro system- Top performance handling- Lowers the vehicle's centre of gravity by up to 40 mm (depending on the vehicle)- Spring design for traction and attraction- Progressive suspension characteristics- Performance handling- ABE or parts certificate Note: Only for vehicles without levelling control. Information:- Lowering front axle: approx. 30mm- Lowering rear axle: approx. 25mm- Type of approval: with expert opinion- Suspension: for all standard damping systems- Illustration may differ from the original Compatible vehicles:- Axle load front axle: up to 1120kg- Axle load rear axle: up to 1360kg- EC type approval number: e1*2007/46*2017*..- Only for vehicles without levelling system BMW 3 Series Touring (G21) year of construction 07.19-M340i xDriveM340i Mild-Hybrid xDrive330i xDrive320d xDrive320d Mild Hybrid xDrive330d330d Mild Hybrid

Eibach Pro-Kit performance suspension springs for front and rear axle E10-20-045-02-22 The Eibach Pro-Kit lowering springs are the ideal solution for your vehicle, as the kit lowers the centre of gravity, reduces rebound when accelerating, reduces body roll when cornering and dips when braking. As a result, understeer and oversteer no longer occur. Lowering the vehicle with the Pro-Kit springs reduces the standard distance between the tyres and the wheel arch and gives the vehicle a sporty look. In addition, the handling of the vehicle is maximised. The Eibach Pro-Kits are designed by Eibach suspension engineers and test experts to deliver a combination of sporty looks and performance without compromising on safety or ride quality. - Developed and tested for combination with standard and aftermarket dampers- Component of the Eibach Pro system- Top performance handling- Lowers the vehicle's centre of gravity by up to 40 mm (depending on the vehicle)- Spring design for traction and attraction- Progressive suspension characteristics- Performance handling- ABE or parts certificate Note: Only for vehicles without levelling control. Information:- Lowering front axle: approx. 30mm (G20), approx. 25mm (G22/G26)- Rear axle lowering: approx. 30mm (G20), approx. 25mm (G22/G26)- Approval type: with expert opinion- Suspension: for all standard damping systems- Illustration may differ from the original Compatible vehicles:- Axle load front axle: up to 1120kg (G20/G22/G26)- Axle load rear axle: up to 1255kg (G20), up to 1325kg (G22/G26)- EC type approval number: e1*2018/858*00122*..- Only for vehicles without levelling system BMW 3 Series Saloon (G20) year of construction 11.18-320i xDrive330i xDriveM340i xDriveM340i Mild-Hybrid xDriveM340i xDrive320d xDrive320d Mild-Hybrid xDrive330d330d Mild-Hybrid330d xDrive330d Mild-Hybrid xDrive BMW 4 Series Coupe (G22) Year of construction 07.20-M440i Mild-Hybrid xDrive420d Mild-Hybrid xDrive BMW 4 Series Gran Coupe (G26) Year of construction 07.21-430i xDrive420d Mild-Hybrid xDrive

Fakten: Marke Eventuri Material Carbon Montage: wie Originalteil (Austausch) Teilegutachten: Für dieses Produkt ist ein Gutachten für bestimmte Regionen und Fahrzeuge verfügbar (Details weiter unten) ACHTUNG: Alle vor 2018 gebaute Modelle haben noch einen Luftmassenmesser verbaut. Alle nach 2018 gebauten Modelle einen Temperatursensor. Daher gibt es für beide Motorenvarieanten zwei unterschiedliche Produkte. Der BMW G20/G21 B58 Eventuri-Ansaugsystem wurde entwickelt, um dem Turbo einen weniger restriktiven Strömungsweg bei gleichzeitig niedrigen Einlasstemperaturen zu bieten. Bei der Konstruktion eines Ansaugssystems für turboaufgeladene Motoren stehen Wärme und Volumen im Vordergrund. Beim G20 befindet sich das Ansaugsystem neben dem Auspuffkrümmer, der den Motorraum schnell mit Wärme durchzieht. Hohe Temperaturen wirken sich nachteilig auf die Motorleistung aus, da der Turbo mit erhitzter, weniger dichter Luft aufgeladen werden müsste, so dass die einzige Möglichkeit, die IATs auf ein Minimum zu reduzieren, ein vollständig abgedichtetes Intake ist. Dies führt jedoch zu einer Beschränkung mit nur einer Vorratsluftzufuhr, aus der Luft angesaugt wird. Während der Entwicklung stellten wir eine zusätzliche Öffnung im Radkastenbereich fest und nutzten dies aus, indem wir unserer Airbox eine zweite Zuführung hinzufügten. Darüber hinaus verfügt unsere abgedichtete Airbox auch über ein Hitzeschild mit Goldreflexion, um die Strahlungswärmeübertragung vom Auspuffkrümmer zu minimieren. Um das Volumen zu maximieren, haben wir die Airbox so groß wie möglich mit einer Aussparung für potenzielle Federbeinverstrebungen versehen. Das serienmäßig gewellte Ansaugrohr wurde durch ein glattes Karbonrohr ersetzt, das ebenfalls ein größeres Innenvolumen mit einem anfänglichen Innendurchmesser von 111 mm (4.4") aufweist und sich passend zum Turboeinlass sanft nach unten verjüngt. Das Rohr bietet einen glatten Weg vom Filter zum Turboeinlass. Schließlich verwenden wir einen maßgefertigten High-Flow-Trockenfilter, der auf seine Filtrationsleistung ISO-geprüft ist und eine größere Filterfläche als der Standardfilter hat. Das G20/G21 B58 Eventuri-Ansaugsystem besteht aus einer Reihe von Komponenten, die für einen bestimmten Zweck konstruiert und nach den höchsten Standards gefertigt wurden. Wir verwenden 100% Prepreg-Kohlefaser ohne Glasfaser, was bedeutet, dass wir eine glatte innere Oberfläche erreichen können, um einen gleichmäßigeren Luftstrom zu erhalten. Hier sind die Details für jede Komponente und das Designethos dahinter: Jedes Ansaugsystem besteht aus: Carbon-Airbox mit zwei Einlässen Maßgeschneiderter Trockenkonus-Filter mit hohem Durchfluss Carbon-Einlassrohr Halterung für CNC-gefrästen Temperatursensor CNC-gefräste Entlüftungsadapter Hitzeschild mit reflektierender Goldfolie Lasergeschnittene Halterungen aus Edelstahl Silikon-Reduzierer mit Klemmen nach OEM-Spezifikation Teilegutachten Für den Einbau gelten die Angaben des Herstellers. Ein vorhandenes Gutachten ist keine Garantie dafür, dass das Produkt auch im entsprechenden Fahrzeug eingebaut werden kann. Für dieses Produkt ist ein Gutachten für die folgenden Regionen und Fahrzeuge verfügbar: * DE/AT: Fahrzeugschein, Feld K --- CH/LI: Fahrzeugausweis, Feld 24 Länder    Modell     Typgenehmigung* DE/AT    BMW M240i     e1*2018/858*00123*.. DE/AT    BMW M240i xDrive     e1*2018/858*00123*.. DE/AT    BMW M340i     e1*2007/46*1947*.. DE/AT    BMW M340i     e1*2007/46*2017*.. DE/AT    BMW M340i xDrive     e1*2007/46*1947*.. DE/AT    BMW M340i xDrive     e1*2007/46*2017*.. DE/AT    BMW M440i xDrive     e1*2007/46*2126*.. DE/AT    BMW Z4 M40i     e1*2007/46*1949*.. DE/AT    Toyota Supra     e1*2007/46*1982*.. Kompatible Fahrzeuge: FahrzeugTypLeistungHubraumMotor 2er (G42) ab 11/2018M240i / xDrive275kW / 374PS2998cm³B58 B20 B 3er (G20/G21)M340i xDrive275kW / 374PS285kW / 387PS2998cm³B58 B30 B

Made from high-strength spring steel, most H&R anti-roll bars can be adjusted on the front and rear axle. Precision-forged ends and the use of bearings made from a special composite material guarantee precise wheel guidance and reduce the vehicle's tendency to roll. Can be combined with all commercially available standard or sports suspensions. Brief description: - Installation location front axle: Ø 26 mm, not adjustable - Installation location rear axle: Ø 19 mm, not adjustable - with parts certificate - Please note the information! - Illustration may differ from the original The product benefits at a glance: - Reduced rolling tendency of the vehicle - Better handling due to reduced body roll - Partially multi-adjustable - Minimal loss of comfort - Under- or oversteer are reduced or changed - Can be installed with standard or sports suspension - High-strength special spring steel - Bearings made from special composite material - In-house development and production in Germany - With parts certificate Note 55: When installing the H&R stabilisers, the standard add-on parts must also be used, unless otherwise supplied by H&R. It must be ensured that the original parts to be used are in perfect condition; if necessary, these parts must be replaced. Note 60: With this stabiliser bar set, the VA stabiliser bar can also be installed separately (without the HA stabiliser bar) and is TÜV-approved. However, if only the front stabiliser bar is installed separately, the vehicle may have a tendency to understeer. Usage numbers: 33662-4, 336624 Suitable for: - BMW 4 Series Convertible (G23, G83) M 440i Mild-Hybrid xDrive (275 kW, 374 hp) - BMW 4 Series Convertible (G23, G83) M 440i Mild-Hybrid xDrive (285 kW, 387 hp) - BMW 4 Series Coupe (G22, G82) 420d Mild-Hybrid xDrive (140 kW, 190 hp) - BMW 4 Series Coupe (G22, G82) 430d Mild-Hybrid xDrive (210 kW, 286 hp) - BMW 4 Series Coupe (G22, G82) 430i xDrive (190 kW, 258 hp) - BMW 4 Series Coupe (G22, G82) M 440d Mild-Hybrid xDrive (275 kW, 374 hp) - BMW 4 Series Coupe (G22, G82) M 440i Mild-Hybrid xDrive (285 kW, 387 hp)

Made from high-strength spring steel, most H&R anti-roll bars can be adjusted on the front and rear axle. Precision-forged ends and the use of bearings made from a special composite material guarantee precise wheel guidance and reduce the vehicle's tendency to roll. Can be combined with all commercially available standard or sports suspensions. Brief description: - Installation location front axle: Ø 26 mm, not adjustable - Installation location rear axle: Ø 19 mm, not adjustable - with parts certificate - Please note the information! - Illustration may differ from the original The product benefits at a glance: - Reduced rolling tendency of the vehicle - Better handling due to reduced body roll - Partially multi-adjustable - Minimal loss of comfort - Under- or oversteer are reduced or changed - Can be installed with standard or sports suspension - High-strength special spring steel - Bearings made from special composite material - In-house development and production in Germany - With parts certificate Note 55: When installing the H&R stabilisers, the standard add-on parts must also be used, unless otherwise supplied by H&R. It must be ensured that the original parts to be used are in perfect condition; if necessary, these parts must be replaced. Note 60: With this stabiliser bar set, the VA stabiliser bar can also be installed separately (without the HA stabiliser bar) and is TÜV-approved. However, if only the front stabiliser bar is installed separately, the vehicle may have a tendency to understeer. Usage numbers: 33662-4, 336624 Suitable for: - BMW 3 Series (G20, G80) 320d Mild-Hybrid xDrive (120 kW, 163 hp) - BMW 3 Series (G20, G80) 320d Mild-Hybrid xDrive (140 kW, 190 hp) - BMW 3 Series (G20, G80) 320d xDrive (120 kW, 163 hp) - BMW 3 Series (G20, G80) 320d xDrive (140 kW, 190 hp) - BMW 3 Series (G20, G80) 320i xDrive (135 kW, 184 hp) - BMW 3 Series (G20, G80) 330d Mild-Hybrid (210 kW, 286 hp) - BMW 3 Series (G20, G80) 330d Mild-Hybrid xDrive (210 kW, 286 hp) - BMW 3 Series (G20, G80) 330d xDrive (195 kW, 265 hp) - BMW 3 Series (G20, G80) 330i xDrive (190 kW, 258 hp) - BMW 3 Series (G20, G80) M 340d Mild-Hybrid xDrive (250 kW, 340 hp) - BMW 3 Series (G20, G80) M 340i Mild-Hybrid xDrive (275 kW, 374 hp) - BMW 3 Series (G20, G80) M 340i xDrive (275 kW, 374 hp) - BMW 3 Series (G20, G80) M 340i xDrive (285 kW, 387 hp) - BMW 3 Series Touring (G21) 320d Mild-Hybrid xDrive (120 kW, 163 hp) - BMW 3 Series Touring (G21) 320d Mild-Hybrid xDrive (140 kW, 190 hp) - BMW 3 Series Touring (G21) 320d xDrive (140 kW, 190 hp) - BMW 3 Series Touring (G21) 330d Mild-Hybrid xDrive (210 kW, 286 hp) - BMW 3 Series Touring (G21) 330d xDrive (195 kW, 265 hp) - BMW 3 Series Touring (G21) 330i xDrive (190 kW, 258 hp) - BMW 3 Series Touring (G21) M 340d Mild-Hybrid xDrive (250 kW, 340 hp) - BMW 3 Series Touring (G21) M 340i Mild-Hybrid xDrive (275 kW, 374 hp) - BMW 3 Series Touring (G21) M 340i xDrive (275 kW, 374 hp) - BMW 3 Series Touring (G21) M 340i xDrive (285 kW, 387 hp)

HJS no. 90 82 2050Ø 89/76mm downpipe Facts:ECE R103 approved300 cpsi stainless steel catalytic converterPerformance optimizationSporty soundPlug & PlayThermal relief of the turbocharger Compatible vehicles:ManufacturerModelTypeEngine capacity (ltr.)Power (kW)Engine typeEmission standardNoteBMW540i / xDriveG30 (G5L)3.0250B58B30CEuro 6d - OPFV-band clamp required BMW640i Gran Turismo xDriveG32 (G6GT)3.0250B58B30CEuro 6d - OPFV-band clamp required BMW740i Limousine/ xDriveG11/G12 (7L)3.0250B58B30CEuro 6d - OPFV-band clamp required BMW840i Cabrio/ xDriveG14 (G8C)3.0250B58B30CEuro 6d - OPFV-band clamp required BMW840i Gran Coupé/ xDriveG16 (G8C)3.0250B58B30CEuro 6d - OPFV-band clamp required BMWM240i xDriveG42 (G2C)3.0275B58B30BEuro 6d - OPFV-band clamp required BMWM340i xDriveG20/G28 (G3K)3.0275B58B30BEuro 6d - OPFV-band clamp required BMWM440i xDriveG22/G23/G26 (G3C)3.0275B58B30BEuro 6d - OPFV-band clamp required BMWZ4 M40iG29 (G4Z)3.0250B58B30CEuro 6d - OPFV-band clamp required ToyotaSupra GR(A90/DB) JTSC3.0250B58B30CEuro 6d - OPFV-band clamp required

All-wheel drive; type G3L; from 1101kg VA load

4 Series Coupé (G22); all-wheel drive; type G3K, G3C

4 Series Coupé (G22); all-wheel drive; type G3K, G3C

KW coilover suspension DDC "Plug & Play" The "Plug & Play" solution for vehicles with standard electronic damper adjustment.KW also offers you the possibility to combine the active standard damper control of your sporty vehicle with the stainless steel KW DDC Plug & Play coilover suspension. This means that you can continue to use the existing active damper control in your car such as the VW Scirocco, VW Golf VI, VW Passat, BMW Dreier and other models in conjunction with a continuously variable lowering system.The best thing about it: Apart from replacing the adaptive standard suspension with the KW DDC Plug & Play coilover suspension, no further conversion steps or even modifications to the on-board electronics are necessary. The adaptive KW dampers are simply connected to the original connectors of your car manufacturer via the KW DDC plug connection. The standard control unit then takes over the regulation and control of the KW DDC Plug & Play coilover suspension. Perfect symbiosis of an OEM control unit with the advantages of an adaptive KW coilover suspensionOur suspension technology is compatible with the electronics of various car manufacturers. This means that the adaptive KW DDC Plug & Play coilover suspension is immediately recognised by the on-board electronics. All displays and controls of your standard vehicle remain fully functional and combine the advantages of an adaptive damping system with the stylish and sporty lowering of a high-quality KW coilover suspension. Thanks to the exclusive use of rust-free stainless steel and durable components, the functionality of the rust-free KW coilovers is maintained under all weather conditions. Thanks to the dirt-resistant trapezoidal thread and the polyamide threaded ring, adjustment is also possible after a snowy winter, for example. No oxidation occurred on the KW threaded spring legs during a salt spray test. This means that the adjustment of the stepless lowering is not affected even after years. - the plug & play solution for sportiness or more ride comfort at the touch of a button with outstanding looks thanks to stepless lowering- Compatible with the standard suspension control unit- Vehicle-specific damper set-ups such as Comfort / Normal / Sport- Operation via series buttons in the interior Please note the conditions and instructions for this product:- VA + HA height-adjustable (VA coilover struts, HA springs with height adjustment + damper)- Only for vehicles with electronic damper control Technical information:Lowering VA/HA (mm): 40-60/40-60Version: DDC - Plug & PlayHardness adjustment: Rebound and compression dampingMaterial: Stainless steelAdjustment VA/HA: thread/threadApproval: Parts certificate (§19.3) Compatible vehicles:Manufacturer Model Version Body Fuel Performance Displacement Cylinder DriveBMW 3 Series Touring (G21, G81) G3K 07/2019- 320 d Mild-Hybrid xDrive Estate Diesel/Electric 120 KW 1995 ccm 4 All-wheel driveBMW 3 Series Touring (G21, G81) G3K 07/2019- 320 d Mild-Hybrid xDrive Estate Diesel/Electric 140 KW 1995 ccm 4 All-wheel driveBMW 3 Series Touring (G21, G81) G3K 07/2019- 330 d Mild-Hybrid xDrive Estate Diesel/Electric 210 KW 2993 ccm 6 All-wheel driveBMW 3 Series Touring (G21, G81) G3K 07/2019- 330 d xDrive Estate Diesel 195 KW 2993 ccm 6 All-wheel driveBMW 3 Series Touring (G21, G81) G3K 07/2019- M 340 d Mild-Hybrid xDrive Estate Diesel/Electric 250 KW 2993 ccm 6 All-wheel driveBMW 3 Series Touring (G21, G81) G3K 07/2019- M 340 i Mild-Hybrid xDrive estate petrol/electric 275 KW 2998 ccm 6 all-wheel driveBMW 3 Series Touring (G21, G81) G3K 07/2019- M 340 i xDrive Estate Petrol 275 KW 2998 ccm 6 All-wheel driveBMW 3 Series Touring (G21, G81) G3K 07/2019- M 340 i xDrive estate petrol 285 KW 2998 ccm 6 all-wheel driveBMW 4 Series Coupe (G22, G82) 07/2020- 430 d Mild-Hybrid xDrive Coupe diesel/electric 210 KW 2993 ccm 6 all-wheel driveBMW 4 Series Coupe (G22, G82) 07/2020- M 440 i Mild-Hybrid xDrive Coupe petrol/electric 275 KW 2998 ccm 6 all-wheel driveBMW 4 Series Coupe (G22, G82) 07/2020- M 440 i Mild-Hybrid xDrive Coupe petrol/electric 285 KW 2998 ccm 6 all-wheel driveBMW 4 Series Coupe (G22, G82) 07/2020- M440 d Mild-Hybrid xDrive Coupe Diesel/Electric 250 KW 2993 ccm 6 All-wheel driveOnly for vehicles with electronic damper control.