Aulitzky Exhaust | ECE downpipe 3.54" (90mm) with sports catalytic converter | Hyundai i30 N Performance (PD) OPF 275PS

Facts: - replaces the main catalytic converter - with 200-cell stainless steel sports catalytic converter - Euro 6 compatible - with ECE approval*Compatible vehicles:VehicleTypePower outputEngine capacityEngineYear of constructionBMW 1 Series (F40)M135i xDrive225kW / 306PS1998cm³B48 A20 E07.19 -BMW 2 Series Gran Coupe (F44)M235i xDrive225kW / 306PS1998cm³B48 A20 E11.19 -BMW X2 (F39)M35i 225kW / 306hp1998cm³B48 A20 E11.18 - Note: Depending on the software version, the engine control light may light up. We recommend a software adjustment in this case. *This downpipe has ECE approval so that it can be used within the scope of the StVZO without registration in the vehicle documents.

Facts: - Tailpipes: 2x 101mm black - Material: stainless steel - electric flaps - Made in Germany (Lake Constance) - with/without ECE approval (depending on choice of flap control)* Scope of delivery: - 1x Aulitzky Exhaust exhaust system from OPF - 2x tailpipes 101mm black - ECE handout Compatible vehicles:VehicleVehicle typePowerEngine capacityEngineYear of constructionBMW 1er (F40)M135i xDrive225kW / 306hp1989cm³B48 A20 E07.19 - *ATTENTION!In conjunction with the standard or ECE flap control (with type approval), this flap exhaust system has ECE approval so that it can be used legally within the scope of the StVZO without registration in the vehicle documents.The use of flap exhaust systems in conjunction with the race flap control (without approval) is not permitted for use on public roads and is only intended for racing purposes!  If you nevertheless install a product without approval in your vehicle and use it within the scope of the StVZO, you are liable to prosecution. Possible consequences that you can expect in this case: Expiry of the operating license according to §19 of the StVZO and a possible resulting immobilization of the vehicle. Other possible consequences, such as a charge of tax evasion, as well as possible investigations by the environmental authorities are at the discretion of the investigators.

Facts: - Tailpipes: 2x 101mm black - Material: stainless steel - electric flaps - Made in Germany (Lake Constance) - with ECE approval* Lieferumfang: - 1x Aulitzky Exhaust exhaust system from OPF - 2x tailpipes 101mm black - ECE handout Compatible vehicles: VehicleVehicle typePowerEngine capacityEngineYear of constructionBMW 2er Gran Coupe (F44)M235i xDrive225kW / 306hp1998cm³B48 A20 E11.19 - *In conjunction with the standard or ECE flap control (with type approval), this flap exhaust system has ECE approval, meaning that it can be used legally within the scope of the StVZO without registration in the vehicle documents.

Funktion: - variable Klappensteuerung der originalen oder nachgerüsteten Klappenabgasanlage - über Lenkradtasten steuerbar Kompatible Fahrzeuge:FahrzeugTypLeistungHubraumMotorBaujahrBMW 1er (F40)M135i xDrive225kW / 306PS1998cm³B48 A20 E07.19 -BMW 2er Gran Coupe (F44)M235i xDrive225kW / 306PS1998cm³B48 A20 E11.19 - Hinweis: Dieses Produkt ist NICHT in der STVZO zugelassen und NICHT für den Verkauf innerhalb der EU gedacht! Dieser Artikel dient ausschließlich für Show- & Motorsportzwecke und darf nicht im öffentlichen Straßenverkehr genutzt/verbaut werden. Sollte das Bauteil am/im Fahrzeug verbaut sein, erlischt die Betriebserlaubnis! Bei den abgebildeten Bildern handelt es sich um Beispielbilder.

Perfectly shaped, sporty carbon front lip for the BMW F39 X2 M35i. The carbon forge makes no compromises in the production and design of the latest addition to the 3D design portfolio: Perfect quality meets a design that blends seamlessly into the design concept of the new F39 X2 M35i. Sporty and elegant - a real eye-catcher. Compatible vehicles:BMW X2 (F39) M35 i 2018-2023

Facts:Acceleration time: 60-130mph reduced by 0.2 secondsMaterial: CarbonManufacturer: EventuriParts certificate: A certificate is available for this product for certain regions and vehicles (details below) The Eventuri F40 M135i Eventuri intake system has been developed through extensive real world testing and airflow simulation analysis. It features our patented Venturi housing system with an integrated mass airflow sensor section for the smoothest possible airflow to the turbo inlet pipe. The housing encloses our bespoke Generation 2 dry filter which shapes the airflow to maintain laminar conditions. The housing seals to the front duct, the volume of which has been maximized to reduce potential flow restrictions. The duct ensures that only ambient air is supplied to the filter so that the IATs are stable for most riding conditions. The system enables better throttle response and ensures that the turbo operates with a lower waste-gate duty cycle. The Eventuri DifferenceThe F40 M135i Eventuri system utilizes our patented carbon housings with our custom Gen 2 filters that provide an aerodynamically efficient airflow path from the filter to the turbos. Not just another cone filter with a heat shield, but a unique design that creates the Venturi effect and maintains laminar flow conditions to reduce turbo drag. The Eventuri F40 M135i intake system consists of a number of components designed for a specific purpose and manufactured to the highest standards. Here are the details for each component and the design ethos behind them. Each intake system consists of:Carbon venturi filter housing with integrated MAF pipeTailored high velocity generation 2 filterSealed carbon fiber air scoopAluminum inlet adapter2 x laser cut stainless steel brackets Parts certificateThe manufacturer's specifications apply for installation. An existing certificate is no guarantee that the product can also be installed in the corresponding vehicle. A certificate is available for this product for the following regions and vehicles:* DE/AT: Vehicle registration document, field K --- CH/LI: Vehicle registration document, field 24Countries Model Type approval*DE/AT F1H e1*2007/46*2018*..DE/AT F2GC e1*2007/46*2064*..DE/AT F2X e1*2007/46*1824*..DE/AT FMK e1*2007/46*1683*..DE/AT FML2 e1*2007/46*1678*..DE/AT FMX e1*2007/46*1682*.. Compatible vehicles:VehicleVehicle typePowerEngine capacityEngine typeYear of construction BMW 1er (F40)M135i xDrive225kW / 306hp1998cm³B48 A20 E07.19 -BMW 2er Gran Coupe (F44)M235i xDrive225kW / 306hp1998cm³B48 A20 E11.19 -BMW X2 (F39)M35i 225kW / 306hp1998cm³B48 A20 E11.18 -

The pre-impregnated carbon fiber exterior mirror caps are stunning exterior enhancements that give your vehicle a more aggressive and premium look. These mirror covers are made from state-of-the-art prepreg carbon fiber and enhance the aggressive character of your vehicle, making it stand out both on the road and on social media. The road presence these mirror covers offer is unparalleled and you won't be disappointed with the transformation, especially when combined with the other pre-preg carbon fibre products we offer. Why pre-preg carbon fibre?Unlike regular carbon fibre, pre-preg carbon is reinforced to increase strength and durability. It can also be a staggering 70% lighter than other carbon fibre options, ideal for weight saving. In terms of quality, pre-preg carbon is far more consistent, meaning the likelihood of imperfections is drastically reduced. The manufacturing process eliminates unwanted air bubbles and results in a perfect, smooth and high-gloss finish. The finish of these mirror covers is simply flawless. Details:- 100% pure pre-preg carbon fibre construction- OEM style fabric- M-style design- High gloss finish- Quick and easy installation- registration-free Scope of delivery:1x pair of mirror caps made from prepreg carbon fibre Compatible vehicles:BMW F40 1 Series HatchbackBMW F44 2 Series Gran CoupeBMW G29 Z4 RoadsterToyota A90 Mk5 Supra CoupeNote: This is NOT an original BMW product!

The Competition intercooler kit is suitable for:BMW F40 M135i 225KW/306hp from 2019 Optimise the performance of your BMW with our Wagner Tuning Competition high-performance intercooler! Do you want to unleash the full potential of your BMW? Our Competition high-performance intercooler is the answer to your performance needs and offers: Our intercooler sets new standards. With impressive mesh dimensions of 600 mm x 235 mm x 165 mm (stepped), it offers an astonishing 38% larger flow area and a significant 78% more charge air volume compared to the standard intercooler. This results in a noticeable increase in power and a better overall driving experience. Our high-performance mesh has been specially developed and is characterised by its quality. It consists of a Tube Fin mesh with internal turbulators, which optimises airflow and heat dissipation. Although our intercooler is large, it only weighs 10.5kg. This means that you can increase the performance of your BMW without increasing the weight, which has a positive effect on driving dynamics. Thanks to extensive flow optimisation in the CAD system, the cast aluminium end boxes of our intercooler ensure excellent cooling performance with minimal back pressure. This is crucial for an efficient increase in performance. All our intercoolers are equipped with an anti-corrosion coating that not only prevents rust, but also has heat conduction properties. This ensures long-lasting and optimum cooling, which in turn improves performance. Our intercooler is supplied as a completely ready-to-install kit, which enables simple replacement with the standard intercooler - plug and play. The use of the original charge air hoses is still possible. We subject all our products to strict quality control to ensure that you receive only the best. It's time to take your BMW's performance to the next level. With our Competition high performance intercooler, you can expect more power, better cooling and an overall improved driving experience. Invest in quality and boost your BMW's performance with our Wagner Tuning Competition High Performance Intercooler! Advantages of the Wagner Tuning intercooler:- improved airflow- 38% larger inflow area- 78% more charge air volume- Plug & Play Dimensions original intercooler:585mm x 175mm x 110mmV=11.3 litresA=1024 cm² Wagner Tuning intercooler dimensions:600mm x 235mm x 165mm / steppedV=20.1 litresA=1410 cm² Attention: Not approved in the area of the StVZO.