Aulitzky Exhaust | OPF-Deleter | BMW M135i xDrive (F40) 306PS B48
€450.00*
Finanzieren Sie ihren Einkauf über die Targobank.
×
Ratenrechner
Ihre Monatsraten
6 Monate
Kaufpreis:
Monatliche Rate:
Zinsen:
Gesamtbetrag inkl. Zinsen:
Product number:
ATOPFDELBMWM135IF40
Product information "Aulitzky Exhaust | OPF-Deleter | BMW M135i xDrive (F40) 306PS B48"
The Aulitzky Exhaust OPF-Deleter module is used for mechanical removal of the OPF (petrol particulate filter) without subsequent software adaptation.
It is installed in the engine compartment and can be removed at any time without leaving any residue.
- No error messages from the module
- No detection possible using BMW test device
Compatible vehicles:
| Vehicle | Vehicle type | Power output | cubic capacity | Engine | Year of construction |
| BMW 1 Series (F40) | M135i xDrive | 225kW / 306PS | 1989cc | B48 A20 E | 07.19 - |
There aren't any asked questions yet.
%
AIRCONCEPT | Rear wing | BMW 4 Series/M4 (G22/G82)
€3,950.00*
€4,950.00*
(20.2% saved)
Suitable for the following models:
BMW 4 Series (G22) Coupe
M4 (G82)
XWINX - The aerodynamic wing for the BMW 4 Series (G22) and M4 (G82) is four-way adjustable to adapt to different routes. Changing the position takes less than 5 seconds and requires no tools.
Objective: Stabilises cornering at high speeds.
- Very good visibility through the interior rear-view mirror in any position
- best downforce values of all approved wings on the market
- four-way adjustable:
- down = same downforce as standard
- up 1 = 35% more downforce
- up 2 = 65% more downforce
- up 3 = 105% more downforce
(for comparison: the CSL duck tail provides 20% more downforce)
- Position 'down' for daily-driving
- with ABE
Tip
Aulitzky Exhaust | ECE downpipe with 200 cell HJS sports catalytic converter | BMW M2/M3/M4 incl. Competition (G80/G81/G82/G83/G87) S58
€3,599.00*
Facts:
- replaces the main catalytic converter
- with 200 cell HJS stainless steel sports catalytic converter
- Euro 6 compatible
- for current OPF models
- with Thermo-Integral insulation (for an extra charge)
- with ECE approval*
Compatible vehicles:VehicleVehicle typePower outputEngine capacityEngineYear of constructionBMW 2 Series (G87)M2338kW / 460PS2993cm³S58 B30 A11.22 -BMW 3 Series (G80)M3353kW / 480PS2993cm³S58 B30 B11.20 -BMW 3 Series (G80/G81)M3 Competition / xDrive375kW / 510PS2993cm³S58 B30 A05.21 -BMW 4 Series (G82)M4353kW / 480PS2993cm³S58 B30 B11.20 -BMW 4 Series (G82/G83)M4 Competition / xDrive375kW / 510PS2993cm³S58 B30 A05.21 -
Note: Depending on the software version, the engine control light may light up. We recommend the purchase of an OFF set module or software customisation.
*This downpipe has ECE approval so that it can be used within the scope of the German Road Traffic Licensing Regulations (StVZO) without registration in the vehicle documents.
Tip
Aulitzky Exhaust | ECE exhaust system 3" (76mm) from OPF with flap control | BMW M3/M4 incl. Competition (G80/G81/G82/G83) S58
€3,999.00*
Facts:
- Tailpipes: 4x100mm black
- 3.0 inch stainless steel
- MSD removal
- electric flaps
- Made in Germany (Lake Constance)
- with/without ECE approval (depending on choice of flap control)*
Scope of delivery:
- 1x Aulitzky Exhaust exhaust system from OPF
- 4x tailpipes 100mm black
- ECE handout
Compatible vehicles:VehicleVehicle typePower outputcubic capacityEngineYear of constructionBMW 3 Series (G80)M3353kW / 480PS2993cm³S58 B30 B11.20 -BMW 3 Series (G80/G81)M3 Competition / xDrive375kW / 510PS2993cm³S58 B30 A05.21 -BMW 4 Series (G82)M4353kW / 480PS2993cm³S58 B30 B11.20 -BMW 4 Series (G82/G83)M4 Competition / M xDrive375kW / 510PS2993cm³S58 B30 A05.21 -
*ATTENTION! In conjunction with the standard or ECE flap control system (with type approval), this flap exhaust system has ECE approval so that it can be used legally within the scope of the StVZO without registration in the vehicle documents.The use of flap exhaust systems in conjunction with the race flap control (without approval) is not permitted for use on public roads and is only intended for racing purposes! If you nevertheless install a product without approval in your vehicle and use it within the scope of the StVZO, you are liable to prosecution. Possible consequences that you can expect in this case: Expiry of the operating licence in accordance with §19 of the StVZO and possible resulting immobilisation of the vehicle. Other possible consequences, such as a charge of tax evasion, as well as possible investigations by the environmental authorities are at the discretion of the investigators.
Aulitzky Exhaust | OPF-Deleter | BMW M3/M4 incl. Competition (G80/G81/G82/G83) S58
€450.00*
The Aulitzky Exhaust OPF-Deleter module is used for mechanical removal of the OPF (petrol particulate filter) without subsequent software adaptation.
It is installed in the engine compartment and can be removed at any time without leaving any residue.
- No error messages from the module
- No detection possible using BMW test device
Compatible vehicles:VehicleVehicle typePower outputcubic capacityEngineYear of constructionBMW 3 Series (G80)M3353kW / 480PS2993ccS58 B30 B11.20 -BMW 3 Series (G80/G81)M3 Competition / xDrive375kW / 510PS2993cm³S58 B30 A05.21 -BMW 4 Series (G82)M4353kW / 480PS2993cm³S58 B30 B11.20 -BMW 4 Series (G82/G83)M4 Competition / M xDrive375kW / 510PS2993cm³S58 B30 A05.21 -
Aulitzky Exhaust | Race flap control module | BMW M3/M4 incl. Competition (G80/G81/G82/G83) S58
€449.00*
Function:
- Variable flap control of the original or retrofitted flap exhaust system
- Can be controlled via steering wheel buttonsIt is possible that the vehicle will complain about the lack of exhaust back pressure and go into emergency mode if the exhaust flaps are permanently opened manually. This fault can be rectified using the optional G80 OPF deleter.
Note:This product is NOT approved in the STVZO.This article is intended exclusively for show & motorsport purposes and must not be used/installed in public road traffic.If the component is installed on/in the vehicle, the operating licence expires!
The images shown are examples.Compatible vehicles:VehicleTypePowercubic capacityEngineYear of constructionBMW 3 Series (G80)M3353kW / 480PS2993ccS58 B30 B11.20 -BMW 3 Series (G80/G81)M3 Competition / xDrive375kW / 510PS2993cm³S58 B30 A05.21 -BMW 4 Series (G82)M4353kW / 480PS2993cm³S58 B30 B11.20 -BMW 4 Series (G82/G83)M4 Competition / M xDrive375kW / 510PS2993cm³S58 B30 A05.21 -
Aulitzky Tuning | Carbon Air Intakes Twin Fin Double-Ducts | BMW M3 G80 & M4 G82/G83
€1,279.00*
The Twin Fin carbon replacement air intakes for the BMW G8x are designed to match the duct lines in the SP1 G8X front splitter. With both the SP1 and Twin Fin ducts installed, you get the aggressive angles your front end needs.Our covers are a direct replacement, which means you can finally remove the honeycomb grille that is currently in front of the air ducts.These covers are made of pure pre-preg carbon, so the bumper will add minimal weight while providing the aggressive look you've been wanting.
Details:- 100% pure pre-preg carbon fibre construction- OEM style fabric (to match BMW carbon)- High-gloss surface- Fit guarantee- Mounts to the OEM front bumper using the original grille clip positions- This is not an original BMW product
Compatible vehicles:- BMW G80 M3/Competition/CS Sedan (2021+)- BMW G81 M3 Competition Touring (2021+) - BMW G82 M4/Competition/CSL Coupe (2021+)- BMW G83 M4 Competition Convertible (2021+)
Development and distribution in cooperation with Twist'N'Fix.
Aulitzky Tuning | Carbon Exterior Mirror Covers | BMW M3/M4/M240i (G80/81/G82/G83/G42)
€539.90*
Enhance the aesthetics of your G-Series BMW with the M Pre-Preg carbon fibre wing mirror covers. Made from state-of-the-art pre-preg carbon fibre, these mirror covers enhance the aggressive character of your BMW, allowing your vehicle to stand out both on the road and on social media. The road presence these mirror covers offer is unparalleled and you won't be disappointed with the transformation, especially when combined with the other pre-preg carbon fibre products we offer.
Why pre-preg carbon fibre?Unlike regular carbon fibre, pre-preg carbon is reinforced to increase strength and durability. It can also be a staggering 70% lighter than other carbon fibre options, ideal for weight saving. In terms of quality, pre-preg carbon is far more consistent, meaning the likelihood of imperfections is drastically reduced. The manufacturing process eliminates unwanted air bubbles and results in a perfect, smooth and high-gloss finish. The finish of these mirror covers is simply flawless.
Details:- 100% pure pre-preg carbon fibre construction- OEM style fabric- M-style design- High gloss finish- Quick and easy installation- This is not an original BMW product
Compatible vehicles:- BMW G80 M3/ Competition Sedan (2021+)- BMW G81 M3 Competition Touring (2021+)- BMW G82 M4/ Competition Coupe (2021+)- BMW G83 M4 Competition Convertible (2021+)- BMW G87/G42 M240i Coupé (2022+)
Development and distribution in cooperation with Twist'N'Fix.
Aulitzky Tuning | Carbon front grille | BMW M3/M4 (G80/81/G82/G83)
Enhance the aesthetics of the front of your G8X with this CSL-style carbon fibre front grille.
Crafted from state-of-the-art pre-preg carbon fibre, this grille enhances the aggressive character of the G8X, making your vehicle stand out both on the road and on social media.The road presence this grille offers is unrivalled. You will be amazed by the transformation.The BMW M logo is not included. You can continue to use your old emblem or purchase a new one separately.
Details:- 100% pure pre-preg carbon fibre construction- OEM-style fabric (matching BMW carbon fibre)- High-gloss surface- CSL-style design- Fit guarantee- Fits the OEM radiator grille clip positions- This is not an original BMW product
Compatible vehicles:- BMW G80 M3/Competition Sedan (2021+)- BMW G81 M3 Competition Touring (2021+)- BMW G82 M4/Competition Coupe (2021+)- BMW G83 M4 Competition Convertible (2021+)Development and distribution in cooperation with Twist'N'Fix.
€1,179.00*
Aulitzky Tuning | Carbon Kotflügel Seiteneinlässe Emblem Aufkleber | BMW M3/M4 (G80/81/G82/G83)
€259.90*
Die seitlichen Kotflügelabdeckungen aus glänzender Pre-Preg-Carbonfaser sind eine kostengünstige Lösung zur Aufwertung der vorderen Kotflügelabdeckungen Ihres G8x. Entworfen mit Hilfe von 3D-Datenscanning ist die Passgenauigkeit dieser Abzeichen perfekt - unterstützt durch unsere Anpassungsgarantie.Das BMW M Logo ist nicht im Lieferumfang enthalten. Sie können Ihr altes Emblem weiter nutzen oder separat ein neues erwerben.
Details:- Passt über das OEM-Seitenabzeichen- Konstruktion aus 100 % reiner Pre-Preg-Kohlefaser- Gewebe im OEM-Stil- Hochglanz-Finish- Passform-Garantie- Wird mit vormontiertem doppelseitigem 3M-Klebeband geliefert- Es handelt sich hierbei um kein Original BMW Produkt
Kompatible Fahrzeuge:- BMW G80 M3 Limousine (2021+)- BMW G81 M3 Touring (2021+)- BMW G82 M4 Coupe (2021+)- BMW G83 M4 Cabrio (2021+)
Entwicklung und Vertrieb in Kooperation mit der Firma Twist'N'Fix.
Aulitzky Tuning | Carbon Motorhauben Aufsätze | BMW M3/M4 (G80/81/G82/G83)
€329.00*
Die BMW M3/M4 X-Style Motorhaubenblenden in Pre-Preg Kohlenstofffaser sind eine großartige Ergänzung, um die Aggressivität und Straßenpräsenz der Frontpartie Ihres Fahrzeugs zu erhöhen. Das Hochglanz-Finish sieht sehr hochwertig aus und die Kohlefaser im OEM-Stil passt optisch zu jeder OEM Kohlefaser Ihres Fahrzeugs.
Details:- Konstruktion aus 100 % reiner Prepreg-Kohlefaser- X-Style Design- Hochglanz-Finish- Passform-Garantie: passt plug-and-play- schnelle und einfache Montage- Wird mit vormontiertem doppelseitigem 3M-Klebeband geliefert- Es handelt sich hierbei um kein Original BMW Produkt
Kompatible Fahrzeuge:- BMW G80 M3/ Competition Limousine (2021+)- BMW G81 M3 Competition Touring (2021+)- BMW G82 M4/ Competition Coupe (2021+)- BMW G83 M4 Competition Cabrio (2021+)
Aulitzky Tuning | Carbon Rear Spoiler Rear Lip Ducktail Style | BMW M3 (G80)
€349.00*
The BMW M3 G80 Ducktail-Style Rear Spoiler made from Pre-Preg carbon fibre is a very aggressive rear spoiler design that stands out the most from all lip spoilers. The product features a central indentation that emphasises the two sharp fins for added aggressiveness.Details:- 100% pure pre-preg carbon fibre construction- OEM style carbon fibre (matching BMW carbon)- High gloss finish- Ducktail design- Perfect fit- Supplied with pre-mounted double-sided 3M adhesive tape- incl. required mounting accessories- This is not an original BMW product
Compatible vehicles:- BMW G80 M3/ Competition/ CS Sedan (2021+)
Development and distribution in cooperation with the company Twist'N'Fix.
Aulitzky Tuning | Carbon Side Badges | BMW M3/M4 (G80/81/G82/G83)
€599.00*
Enhance the aesthetics of your BMWMade from state-of-the-art prepreg carbon fibre, these direct replacement side emblemsemphasise the aggressive character of your BMW and make your vehicle stand out both on theon the road and on the internet.
Why do we use pre-preg carbon fibre?Unlike regular carbon fibre, pre-preg carbon is reinforced to increase strength and durability.It can also be a staggering 70% lighter than other carbon fibre options, ideal for weight saving.In terms of quality, pre-preg carbon is far more consistent, meaning that the likelihood of imperfections is drastically reduced.of imperfections is drastically reduced.The manufacturing process eliminates unwanted air bubbles and results in a perfect, smooth, sleekand high-gloss finish that is the ultimate piece to complement your vehicle.
When you buy Pre-Preg, you are investing in a higher quality, more durable part that will outlast other forms ofoutlast other forms of carbon fibre and potentially save you money in the long run.
Details:- 100% pure prepreg carbon fibre construction- OEM style weave- High gloss finish- This is not an original BMW product
Compatible vehicles:- BMW G80 M3 Sedan (2021+)- BMW G81 M3 Touring (2021+)- BMW G82 M4 Coupe (2021+)- BMW G83 M4 Convertible (2021+)Development and distribution in cooperation with Twist'N'Fix.
Aulitzky Tuning | Carbon Side Skirts SK-1 | BMW M3/M4 (G80/81/G82/G83)
€1,815.00*
The carbon side skirts offer a huge improvement to the side profile of your vehicleThe SK1 are specifically designed to enhance the road presence of the G8X with a lower, wider and more aggressive look. The sills fit under the factory gloss black side seals and give the vehicle a sleek carbon fibre look, with a profile that matches the SP1 front splitter.
The SP1 utilises the original mounting locations on the underside of the vehicle and mirrors the design of the bumper for an OEM fitment. The product is supplied ready to fit. The new G8X platform does not use threaded bolts in the side seal area. Therefore, we have specified the correct length of stainless steel screws to attach the side skirts to your vehicle.
Details:- 100% pure prepreg carbon fibre construction- X-style design- High gloss finish- Guaranteed fit- Quick and easy installation- Supplied with pre-assembled 3M double-sided adhesive tape- Includes all necessary parts- Installation: Is screwed under the black side seals- This is not an original BMW product
Compatible vehicles:- BMW G80 M3/ Competition Sedan (2021+)- BMW G81 M3 Competition Touring (2021+)- BMW G82 M4/ Competition Coupe (2021+)- BMW G83 M4 Competition Convertible (2021+)
Development and distribution in cooperation with Twist'N'Fix.
Aulitzky Tuning | Carbon Sitzschalencover | BMW M3/M4 (G80/81/G82/G83)
€399.00*
Die Carbon Sitzschalencover sind ein Muss für Ihr M Fahrzeug und werten den Innenraum deutlich auf!Die einfach zu montierenden Sitzschalencover sind aus Pre-Preg 2x2 Carbon gefertigt und passen perfekt zu Ihrem OEM BMW Carbon Interieur.Details:- Gefertigt aus Pre-Preg Kohlefaser mit einem 3k 2x2-Gewebe (OEM Style)- Beschichtet mit einer Hochglanz-Lackierung- 100% Carbon-Konstruktion, um das Gewicht auf ein Minimum zu reduzieren- Vorgefertigtes HI-Bond-Klebeband für einfache Installation und sichere Befestigung - Lieferumfang: 2x Sitzcover (Set) für beide Vordersitze- Es handelt sich hierbei um kein Original BMW ProduktWarum Pre-Preg Carbon?Es gibt eine Reihe von Gründen, warum wir es unseren Kunden empfehlen: Es ist viel stärker als normales Carbon, was auf lange Sicht eine längere Haltbarkeit und Lebensdauer bedeutet. Geben Sie jetzt etwas mehr Geld aus, damit Sie später nicht auf Ersatz zurückgreifen müssen, weil Sie Ihr Carbon falsch behandelt und seine Gefühle verletzt haben.
Pre Preg-Kohle hat eine gleichmäßigere Qualität, wenn sie aus der Form kommt, was bedeutet, dass weniger Probleme oder Unvollkommenheiten auftreten können, die sonst im fertigen Produkt unerwünscht wären. Das Verfahren eliminiert Luftblasen und führt leichter zu einer glatten, glänzenden Oberfläche. Dies macht es zu einem idealen Teil für Ihr Auto. Wenn Sie Wert auf Gewichtseinsparungen legen, ist Pre-Preg optimal, da es 70% leichter ist als alternative Carbonteile.Kompatible Fahrzeuge: BMW M3 (G80) 2021+BMW M4 (G82) 2021+BMW M3 (G80/G81) X Drive (2021+)BMW M4 (G82/G83) X Drive (ab 2021)BMW X3M (F97)BMW X4M (F98)
Entwicklung und Vertrieb in Kooperation mit der Firma Twist'N'Fix.
Aulitzky Tuning | DRLS Running Lights Yellow Module | BMW M3/M4/4 Series incl. Competition (G22/G23/G80/G81/G82/G83)
€399.90*
The daytime running lights bring a touch of the racetrack to the front bumper of your vehicle.
The running lights are inspired by the daytime running lights of the limited edition G82 M4 CSL.
The price is without installation.These are the complete modules including heat sink. No complex conversion is necessary for installation, the modules can simply be plugged in (Plug&Play).
Not approved in the STVZO area. Only suitable for use in motorsport.
Compatible vehicles:VehicleTypePower outputDisplacementEngineYear of constructionBMW 3 Series (G80)M3353kW / 480PS2993ccS58 B30 B11.20 -BMW 3 Series (G80/G81)M3 Competition / xDrive375kW / 510PS2993cm³S58 B30 A05.21 -BMW 4 Series (G82)M4353kW / 480PS2993cm³S58 B30 B11.20 -BMW 4 Series (G82/G83)M4 Competition / xDrive375kW / 510PS2993cm³S58 B30 A05.21 -BMW 4 Series (G22/G23)4 Seriesallallall01.21 -
Tip
Aulitzky Tuning | Leistungssteigerung per Zusatzsteuergerät | BMW M3/M4 inkl. Competition (G80/G81/G82/G83) S58
€1,499.00*
Fakten:
- Plug & Play Montage anhand einer bebilderten Einbauanleitung
- spezieller Kabelbaum für Ihr Fahrzeug
- hochwertige Elektronik „Made In Germany“
- elektronische Bauteile mit Produktqualifizierung für KFZ gemäß AEC-Q100 verbaut
- Support von uns als Co-Entwickler und Hersteller
Lieferumfang:
Zum Lieferumfang gehören das Motorsport Zusatzmodul, ein motorspezifischer Kabelbaum, eine bebilderte Einbauanleitung in DE/EN, sowie ein BYPASS-Stecker, mit welchem Sie Ihr Fahrzeug in Serie zurückspielen können.
Kompatible Fahrzeuge:FahrzeugTypLeistungHubraumMotorBaujahrBMW 3er (G80)M3353kW / 480PS2993cm³S58 B30 B11.20 -BMW 3er (G80/G81)M3 Competition / xDrive375kW / 510PS2993cm³S58 B30 A05.21 -BMW 4er (G82)M4353kW / 480PS2993cm³S58 B30 B11.20 -BMW 4er (G82/G83)M4 Competition / xDrive375kW / 510PS2993cm³S58 B30 A05.21 -
RECHTLICHE HINWEISE:
DER EINBAU EINER ZUSATZELEKTRONIK IST EINE BAULICHE VERÄNDERUNG DER HERSTELLERSEITIGEN ELEKTRONIK. OHNE EINTRAGUNG IN DIE FAHRZEUGPAPIERE MITTELS EINES EINZELGUTACHTENS VON TÜV; DEKRA ODER ANDEREN ANERKANNTEN PRÜFINSTITUTUIONEN FÜHRT DER EINBAU ZUM ERLÖSCHEN DER BETRIEBSERLAUBNIS. BEI EINSATZ IM ÖFFENTLICHEN STRASSENVERKEHR FÜHRT DIES ZU VERLUST DES VERSICHERUNGSSCHUTZES.
DERZEIT LIEGT UNS FÜR IHR FAHRZEUG KEIN TEILEGUTACHTEN VOR. DAHER IST DIESES SYSTEM AUSSCHLIEßLICH FÜR DEN MOTORSPORT GEEIGNET.
ACHTUNG: GEGEBENENFALLS VERLIEREN SIE BEI VERWENDUNG DER ZUSATZELEKTRONIK GEWÄHRLEISTUNGSANSPRÜCHE GEGENÜBER DEM VERKÄUFER ODER GARANTIEANSPRÜCHE GEGENÜBER DEM HERSTELLER. BEI WEITEREN FRAGEN STEHEN WIR IHNEN GEREN ZUR VERFÜGUNG!
Tip
Aulitzky Tuning | OLED Optics Tail Lights | BMW 3 Series incl. M3/ Competition/ CS (G20/G80)
€719.90*
The rear lights in OLED optics with 3D effect make it possible to achieve a new three-dimensional and at the same time very
sharply defined appearance. They are also an ideal change from the factory-fitted rear lights.
- Approved in the area of the StVZO by E-mark (registration-free)
- Service life of up to 50,000 hours.
- The rear lights are waterproof and extremely durable.
Suitable for the following models:
BMW G20 saloon
BMW G80 M3 Saloon
For installation:
The rear lights are plug & play. No coding is necessary.
Scope of delivery:
1x set of rear lights (left + right)
Tip
Aulitzky Tuning | Softwareoptimierung Stage 1 & 2 inkl. ECU-Freischaltung | BMW M3/M4 inkl. Competition (G80/G82/G83) S58
€3,499.00*
Der Lese- & Schreibzugriff auf die Steuergeräte der aktuellen M3/M4 G8x Generation ist ab sofort möglich!
- Für die Freischaltung der ECU ist KEIN Versand ins Ausland notwendig, sondern erfolgt bei uns im Haus.
- Aufgrund der hardwarebasierten Freischaltung ist die ECU auch nach einem BMW-Softwareupdate ohne erneute Freischaltung weiterhin beschreibbar.
- Die Stage 1 & 2 Softwareoptimierung erfolgt ebenfalls im Haus und enthält auf Wunsch weitere kostenlose Individualisierungen wie z.B. einer V-Max Aufhebung etc.
- Infolge des uneingeschränkten Zugriffs sind auch im Nachgang jederzeit Anpassungen des Softwarestandes möglich.
- Das Fahrzeug wird vor Ort benötigt. Somit ist eine Einsendung der ECU zur reinen Freischaltung aktuell nicht umsetzbar.
Hinweis: Wie bei jedem Hardwareeingriff besteht auch hierbei ein potentielles Risiko eines Defekts des Steuergeräts. Im Falle eines solchen Defekts können wir Ersatz zu vergünstigten Konditionen zur Verfügung stellen.Kompatible Fahrzeuge:FahrzeugTypLeistungHubraumMotorBaujahrBMW 3er (G80)M3353kW / 480PS2993cm³S58 B30 B11.20 -BMW 3er (G80/G81)M3 Competition / xDrive375kW / 510PS2993cm³S58 B30 A05.21 -BMW 4er (G82)M4353kW / 480PS2993cm³S58 B30 B11.20 -BMW 4er (G82/G83)M4 Competition / xDrive375kW / 510PS2993cm³S58 B30 A05.21 -
Sold out
%
BMW Genuine Parts | Carbon Rear Spoiler Lip | BMW M3/Competition/CS (G80) | 51628086380 | SPECIAL PRICE
€750.00*
€1,095.28*
(31.52% saved)
We are offering an original BMW boot lip suitable for the M3/M4 G80+G82 as a special offer.
BMW part number: 51 62 8 086 380
This original M Performance spoiler complements your vehicle and gives it a sporty look.
Product details:- Visual highlight at the rear of the vehicle.- Clearly emphasises the sporty character- High-quality and robust BMW quality
The lip was already temporarily glued to a vehicle, only new adhesive is required.
However, it has no damage or scratches. So like new!
SPECIAL PRICE - USED (AS NEW) - only one piece in stock!
Compatible vehicles:BMW 3 Series M3/Competition/CS Saloon G80
BMW Genuine Parts | Emblem 50 Jahre M Front Flap Bonnet (74mm) | BMW M2/M3/M4 (G80/G82/G83/G87) | 51117886545
€89.32*
BMW part number: 51 11 7 88 65 45BMW launched these new M Heritage badges for the 2022 model year.
Compatible vehicles:BMW 2 Series (G87) M2BMW 3 Series (G80) M3BMW 3 Series (G80/G81) M3 Competition / xDriveBMW 4 Series (G82) M4BMW 4 Series (G82/G83) M4 Competition / xDriveBMW 4 Series (G82) M4 CSL
BMW genuine parts | hub cap rim cover 50 years M (55mm) | BMW G-series | 36125A57484
€217.00*
BMW part number: 36 12 5 A57 484
As an alternative to the conventional BMW emblem, the BMW Motorsport emblem signals a passion for racing and for the roots of the BMW M brand.
The BMW Motorsport logo with the staggered semicircles in blue, purple and red was first used in 1973 on the racing cars of BMW Motorsport GmbH, which had been founded the previous year. It was not until 1978 and the debut of the BMW M1 that the three colour stripes leaning to the right and based on the letter M followed, which to this day are a trademark with a particularly high recognition value and high identification power even beyond the motorsport scene.
Scope of delivery: Set of BMW hub covers (4 covers)
Compatible vehicles:BMW 1 Series 5-door F40BMW 2 Series Active Tourer F45BMW 2 Series Active Tourer U06BMW 2 Series Coupe G42BMW 2 Series Gran Coupé F44BMW 2 Series Gran Tourer F46BMW 3 Series Sedan G20BMW 3 Series M3 Sedan G80BMW 3 Series Touring G21BMW 4 Series Convertible G23BMW 4 Series Coupe G22BMW 4 Series Gran Coupe G26BMW 4 Series M4 Convertible G83BMW 5 Series Saloon G30BMW 5 Series Touring G31BMW 5 Series M5 F90BMW 6 Series Grand Turismo G32BMW 7 Series Saloon G11BMW 7 Series Long Saloon G12BMW 8 Series G14BMW 8 Series G14/G15/G16BMW 8 Series G15BMW 8 Series G16BMW 8 Series M8 F91BMW 8 Series M8 F92BMW M5 F90BMW X1 F48BMW X2 F39BMW X3 G01BMW iX3 G08BMW X3M F97BMW X4 G02BMW X4M F98BMW X5 G05BMW X5M F85BMW X5 M F95BMW X6 G06BMW X6M F86BMW X6 M F96BMW X7 G07BMW Z4 Roadster G29
BMW M Performance | Aero Flick Carbon Set | BMW M3/M4/Competition/CS/CSL (G80/G82) | 51115A08FE9 | 51115A08FF9
€596.00*
Genuine article - BMW part numbers: 51 11 5 A08 FE9, 51 11 5 A08 FF9
Matching the optional carbon fibre package, the M Performance Aero Flicks emphasise the sporty appearance of the BMW M3 or M4. The M Performance Aero Flicks made of carbon fibre give the vehicle a striking and characteristic front view.
All parts have been specially developed for the respective vehicles and can also be installed without the optional carbon fibre package.The aero flicks are customised for the BMW M3 G80 and M4 G82 G83.
-attractive, sporty look-optimised adjustment to the vehicle and the optional carbon package-easy assembly-Manufacture of the carbon parts in elaborate manual work-optimised aerodynamics-enhance the sporty driving behaviour-temperature-resistant-UV-resistant
The material (CFRP) is sealed with clear lacquer and is therefore UV and temperature resistant.Genuine M Performance parts impress with their first-class aerodynamics and enhance the sporty driving behaviour.An ABE (general operating licence) is not necessary as the parts are already homologated with the complete vehicle.
Scope of delivery:- 1x M Performance Aero Flick Carbon fibre right.- 1x M Performance Aero Flick Carbon left.
Material:- Carbon fibre reinforced plastic (CFRP)
Fitting instructions:- The bonding surfaces must be cleaned with a cleaner before installation and must be free of grease. - Please observe the curing times of the adhesive. When using liquid adhesive (e.g. 1K adhesive), the curing times must be observed.- The vehicle must not be moved for 24 hours.- The vehicle is only suitable for washing after at least 48 hours.
Compatible vehicles:BMW 3 Series M3/Competition/CS Saloon G80BMW M3 Competition Touring G81BMW 4 Series M4/Competition/CSL Coupé G82BMW 4 Series M4 Competition Convertible G83
BMW M Performance | Air Intake Mudguard Trim Carbon Set | BMW M4/Competition (G82/G83) | 51132469622 | 51132469623
€830.00*
Genuine product - BMW part numbers: 51 13 2 469 622 / 51 13 2 469 623
These original M Performance trim strips are made of carbon fibre-reinforced plastic.
The M Performance side panel mouldings are specially developed for the M4 and can also be installed without the optional carbon package.
-Unique differentiation option thanks to first-time design in high-quality visible carbon fibre-special development for the M4 Coupé guarantees 100% accuracy of fit-perfect adaptation to the vehicle design-optimised interaction with all other M Performance Parts-Complex production of the components for a high-quality appearance-Tested and approved in accordance with strict BMW Group quality guidelines-The material (CFRP) is sealed with clear lacquer and is therefore UV and temperature resistant-Original M Performance parts impress with first-class aerodynamics and enhance the sporty driving behaviour-Fulfilment of all legal requirements-Easy installation as with the standard components-An ABE (general operating licence) is not necessary, as the parts are already homologated with the complete vehicle
Details on the material:Parts of the side trim strips are made of carbon fibre-reinforced epoxy resin. After the carbon parts have hardened, a clear coat is applied to emphasise the depth effect of the 3K fabric and protect the matrix material (epoxy resin) from environmental influences.
Scope of delivery:- 1x M Performance trim moulding air intake carbon wing right- 1x M Performance carbon fibre left wing air intake trim strip
Notes:- Please note installation side: The installation location information "left" or "right" always refers to the direction of travel!
Compatible vehicles:BMW 4 Series M4/Competition Convertible G83BMW 4 Series M4/Competition Coupé G82
BMW M Performance | Carbon Shift Paddles Set | G-Series | 61319501592
€695.99*
Genuine product - BMW part number: 61 31 9 501 592
Scope of delivery:-1x carbon rocker switch right-1x carbon rocker switch left
Notes:Installation must only be carried out by persons with the appropriate specialist training or a specialist automotive workshop.
Compatible vehicles:1 Series F402 Series F44, G873 Series G20, G21, G28, G80, G814 Series G22, G23, G26, G82, G835 Series F90, F90N, G30, G30N, G31, G31N6 Series G32, G32N8 Series F91, F92, F93, G14, G15, G16X3 F97, F97N, G01, G01NX4 F98, F98N, G02, G02NX5 F95, F95N, G05X6 F96, F96N, G06X7 G07XM G09Z4 G29